Linksys Nas200 5z1j29

. Press Enter.

1. Click Access My Files.

If you do not know its IP address, then run the Setup Wizard. Click the Click Here to Start button. Then click Advanced Setup. Select the appropriate Network Storage System, and its IP address will be displayed. (For more information, refer to “Chapter 2: Configuration Using the Setup Wizard”.) 3. A screen appears. (Non-Windows XP s will see a similar screen.) Leave the name field blank. The first time you open the web-based utility, use the default . (You can set a new from the Access My Files > Personal Info screen.) Click OK to continue.

Access My Files Click this option to access folders or change your .

2. Enter your information in the Name and fields. 3. Click OK. The Files screen automatically appears. You have two options available, Files and Personal Info, in the My Files column. If the Manager feature has been enabled through the istration > System Options screen and your has Manager access, then the My s option will also be displayed. NOTE: The Manager feature lets you specify tasks for the Network Storage System. The advantage is that the Network Storage System can run the task separately, without using your computer. For example, if you order a movie online, then you can have the Network Storage System—instead of your computer— the movie.

Screen

Network Storage System with 2 Bays

11

Advanced Configuration

Chapter 3

My Files > My s

The you use to access your files is displayed.

If the Manager feature has been enabled through the istration > System Options screen and your has Manager access, then the My s screen will be available. Configure tasks on this screen.

My Files > Files

Shared Folders The Files screen displays a list of shared folders that you can access, according to your . Within a shared folder, s with access to that shared folder can create other folders and files. Public Folders These are shared folders accessible to all s. Disk 1 and Disk 2 are listed as PUBLIC DISK 1 (Public Data) and PUBLIC DISK 2 (Public Data). Private Folders These are your personal folder and the shared folders associated with your . (The controls folder access using the istration > Shared Folders screen.) USB Storage Devices All s have access to the devices connected to the Network Storage System.

My Files > My s

Manager The status of the Manager feature is displayed. Name Your name is displayed. Maximum Concurrent Tasks The maximum number of tasks that can run at the same time is displayed. For each task, the screen lists the File Name, File Size, Progress, Speed, and Status information. Add Task Click this option to add a new task. A new screen appears.

Current Folder The shared folder you are currently accessing is displayed. The sub-folders available to you are listed with the following information: Type, Name, Size, and Last Modified date and time. Click the folder you want to access. To view a file, click the filename. To a file, right-click the filename and select Save Target as... Create New Task

Click Refresh for the most up-to-date information.

Source


•

URL Enter the URL of the FTP or HTTP URL.

•

Destination Click Browse. The Folders Browser screen appears.

12


Chapter 3

My Files > Personal Info Change your on this screen.

Folders Browser

–

Current Folder Select the location of the shared folder that you want to specify as the current folder.

–

New Folder To create a new folder, enter its name, and then click Create. Select the new folder from the list, and its path appears in the Current Folder field.

Click Apply to save the location. Click Close to exit this screen. •

The Remote Server Requires Authentication If authentication is required to access the URL, select this option, and complete the following: –

Name Enter the name used to access the URL.

–

Enter the used to access the URL. NOTE: For more information about authentication for the remote server, the of the remote server.

Click Save to save the new task, or click Cancel to clear your changes.

My Files > Personal Info

Name Your name is displayed. Current Enter your current . New Enter your new . Confirm New Enter your new again. Click Save to save your new , or click Cancel to clear your change.

istration > Status To manage the Network Storage System: 1. Click istration . 2. Enter your information in the Name and fields. 3. Click OK. The Status screen shows information about the Network Storage System.

Start/Stop Select the appropriate task, and then click Start/Stop to start or stop the selected task. Cancel If you want to delete a task, select it, and then click Cancel. Refresh Click Refresh to update the on-screen status information.

istration > Status


13


Chapter 3

Disk Status Information about the hard drive(s) is displayed.

Internal Disks Volume Mode The disk configuration is displayed. Volume Status The format status of each hard drive is displayed. Disk 1-2, LVM, RAID 1, or RAID 0 The amount of free and total space is displayed. Information The Model number and Status of each hard drive are displayed.

Log File

External Disks

Click Refresh for the most up-to-date information. Click Clear to remove all entries. Click Close to exit this screen and return to the Status screen.

USB Port For each USB storage device, the Partition, File System, Shared Folder, Total Size, and Free Size information is displayed.

System Status For the Network Storage System, the Server Name, Firmware Version, Hardware Address, IP Address, Date, Time, and Current Status information is displayed.

istration > s The s screen allows you to manage all Network Storage System s. Linksys recommends that you create a for each , so each has a unique and personal folder. (The has automatic read/write access to the personal folder, which uses the name as the folder name.)

istration > s

List Disk and System Status

Click Refresh for the most up-to-date information. Click View Log to view a list of system activities. The Log File screen appears.

The List shows all existing s. (The and guest s are pre-defined and cannot be deleted.)

New Click this option to add a . The Create screen appears.

New •


Name Create a unique name for the . Punctuation and other special characters (for example, * / | \ ) cannot be used in the name.

14


Chapter 3

•

Enter the this will use to access the Network Storage System.

•

Enter the again.

•

Allow Manager Access If you want to allow this to use the Manager, then select this option.

•

Allow Manager Access If you want to allow this to use the Manager, then select this option.

•

Restrict Disk Quota to __ MB Select this option if you want to set a maximum amount of disk space for this . Then enter the number of MB you want to allow.

NOTE: The Manager feature lets you specify tasks for the Network Storage System. The advantage is that the Network Storage System can run the task separately, without using your computer. For example, if you order a movie online, then you can have the Network Storage System—instead of your computer— the movie. •

Restrict Disk Quota to __ MB Select this option if you want to set a maximum amount of disk space for this . Then enter the number of MB you want to allow.

•

Create Personal Folder Linksys recommends that you keep this option enabled, so each has a personal folder. (The has automatic read/write access to the personal folder, which uses the name as the folder name.)

Properties

Click Save to save your changes, or click Cancel to clear your changes.

Delete To delete a , select the on the List. Then click this option. A confirmation screen appears.

Confirm Deletion

Click OK to confirm the deletion, or click Cancel to cancel the deletion.

New

Another screen appears, asking if you want to delete the ’s corresponding personal folder.

Click Save to create a new , or click Cancel to clear your changes.

Edit Click this option to change the settings of a . The Properties screen appears.

Properties •

Name Change the name of the . Punctuation and other special characters (for example, * / | \ ) cannot be used in the name.

•

Change the this will use to access the Network Storage System.

•

Enter the again.


Confirm Deletion of Personal Folder

Click OK to delete the personal folder, or click Cancel to keep the personal folder and its contents.

15


Chapter 3

istration > Shared Folders The Shared Folders screen allows you to create and manage shared folders. Within a shared folder, s with access to that shared folder can create other folders and files.

Folders Browser

–


–


istration > Shared Folders

Shared Folder List

Click Apply to save the location. Click Close to exit this screen.

The Shared Folder List shows all existing shared folders. A has access to the following: •

Public folders accessible to all s

•

Private folders: personal folder and shared folders specified by the

•

USB storage devices accessible to all s

Share Only s with istrative rights can create shared folders. Click this option to create a new shared folder.

New Shared Folder Once the shared folder is created, the location cannot be changed.

•

Display Name Enter the display name of the folder. Punctuation and other special characters (for example, * / | \ ) cannot be used in the name.

•

Description Enter a description of the folder. Click Save to create a new shared folder, or click Cancel to clear your changes. The shared folder will appear on the My Files > Files screen of s who have access to that shared folder.

Edit Only s with istrative rights can edit shared folders. To change the properties of a shared folder, select the folder on the Shared Folder List, and then click this option. The Shared Folder Properties screen appears.

Shared Folder Properties Change the display name or description on this screen.

New Shared Folder

•

Location Click Browse. The Folders Browser screen appears. Shared Folder Properties


16


Chapter 3

•

Location The location cannot be changed.

•

WINS

•

Display Name Change the display name of the folder. Punctuation and other special characters (for example, * / | \ ) cannot be used in the name.

•

DDNS

•

Date & Time

•

E-Mail Alert

•

Scheduled Shutdown

•

Manager

•

UPnP

•

Options

•

Description Change the description of the folder. Click Save to save your changes, or click Cancel to clear your changes.

Delete To delete a shared folder, select the shared folder on the Shared Folder List. Then click this option. A confirmation screen appears.

NOTE: In most cases you do not need to change the settings on this screen.

Confirm Deletion of Shared Folder

Click OK to confirm the deletion, or click Cancel to cancel the deletion. Another screen appears, asking if you want to delete the content of the shared folder.

istration > System Options

Confirm Deletion of Contents

Click OK to delete the content, or click Cancel to keep the content.

Index A list of links to the different sections of the System Options screen is displayed. Click the link to the settings you want to configure.

List To change the access rights of s, select the appropriate shared folder. Then select No Access, Read Only, or Read/Write for each . All s have Read/Write access to the shared folders of USB storage devices. The has Read/Write access to all shared folders. Click Save to save your changes, or click Cancel to clear all changes.

istration > System Options The current settings of the Network Storage System appear on this screen. You can change any of the settings in the following sections: •

Identification

•

IP Address

•

DNS Server


17


Chapter 3

•

Network Mask Enter the Network or Subnet Mask, which must match the Subnet Mask of the other devices on your network. The default is 255.255.255.0.

Gateway If you have a router on your network, enter its IP address. The default is 192.168.1.1.

DNS Server Obtain DNS Server Addresses from DH Server If you have a router or other DH server on your network, select this option. Use Fixed DNS Server Addresses If you want to set specific DNS settings, select this option. Then enter the following information: •

Primary Enter the IP address of your network’s DNS server.

•

Backup 1-2 (Optional) Enter the IP addresses of your network’s backup DNS servers. If you have listed multiple DNS servers, the first available server will be used.

WINS Identification, IP Address, DNS Server, and WINS

Identification Server Name Enter a different name for the Network Storage System. Punctuation and other special characters (for example, * / | \ ) cannot be used in the name.

Enable WINS If your network has a WINS server, select this option to the Network Storage System with the WINS server. WINS Server Enter the IP address of your WINS server.

Comment Enter a description of the Network Storage System, such as its location. Workgroup Enter the Workgroup name of the computers on your network. If the Workgroup name of the Network Storage System does not match the Workgroup name of the computers on your network, then access to the Network Storage System is still possible, but the Network Storage System will not appear when you double-click My Network Places or Network Neighborhood. (For more information about the Workgroup name of your computers, refer to Windows Help.)

IP Address Obtain IP Address Automatically (DH Client) If you have a router or other DH server automatically asg IP addresses, select this option. Fixed IP Address If you want to set specific network settings, select this option. Then enter the following information: •

IP Address Enter the Network Storage System’s IP address, and make sure that it is on the same local area network (LAN) segment as the computer running the Setup Wizard.


DDNS, Date & Time, and E-Mail Alert

18


Chapter 3

DDNS

•

The Network Storage System offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address, so you can locate the Network Storage System without knowing its dynamic Internet IP address. For example, assign the Network Storage System the fixed host and domain name of www.mystorage.com. When you travel, you can find the Network Storage System at www.mystorage.com (the DDNS service provider keeps track of the dynamic Internet IP address of the Network Storage System.) Before you can use this feature, you need to sign up for DDNS service with TZO, a DDNS service provider at www.tzo.com. Click Sign up for a TZO DDNS . NOTE: To use the DDNS feature of the Network Storage System, configure port forwarding on your network router. For more information, refer to the router’s documentation. Enable TZO DDNS Select this option to use the DDNS feature. E-Mail Address, TZO Key, and Domain Name Enter the settings of the you set up with TZO. Update Period Select how often you want your Internet IP address to be updated with TZO. Update Now To manually trigger an immediate IP address update, click this option.

NTP Server To use a pre-selected NTP server, select Choose and select an NTP server from the drop-down menu. To manually select an NTP server, select Specify and enter the URL or IP address of an NTP server.

•

NTP Status The status of the NTP server is displayed.

•

Synchronize with NTP Server Select how often you want the Network Storage System to synchronize with the NTP server. Then enter the time you want the synchronization to begin.

•

Synchronize Now If you want the Network Storage System to synchronize with the NTP server at this time, click this option.

E-Mail Alert Send E-Mail Alerts when Problems are Detected Select this option if you want the Network Storage System to send e-mails sent when it is experiencing problems. (The problem will be described in the e-mail.) E-Mail Address (1-3) Enter the e-mail addresses that should receive e-mail alerts. From Address Enter the return e-mail address you want used in the e-mails. (This can be a dummy address.) Subject Enter the subject heading you want the e-mails to use. SMTP Port Enter the SMTP port number that you want the e-mail alerts to use. If you are not sure which SMTP port number to use, then keep the default, 25.

Date & Time Time Zone Select your local time zone. Enable Daylight Saving Click this option if your location uses daylight saving. Change System Time as Following To manually set the date and time of the Network Storage System, select this option. Then select the date and time. •

Date Configure today’s date (Month, Day, Year). The Network Storage System will set its own calendar according to the date you provide.

•

Time Enter the current time (hour, minute, am or pm). The Network Storage System will set its own clock according to the time you provide. that the time you enter is not saved until you click Save.

Enable NTP (Network Time Protocol) NTP servers are frequently used to synchronize clocks. To use an NTP server, select this option. Then configure the following settings:


Scheduled Shutdown, Manager, UPnP, and Options

19


Chapter 3

Scheduled Shutdown Shutdown Select the day and time you want the automatic shutdown to occur. Keep the default, Never, if you want to manually initiate the shutdown. (When the Network Storage System is shut down, you will have to manually power on the Network Storage System.) Shutdown Now Click this option to shut down the Network Storage System immediately.

Convert Failed s to “guest” s (Windows Networks) If you want to allow all Windows s to access the Network Storage System with guest access rights, then select this feature. By default, the guest has Read/Write access to public data on each disk (this cannot be changed by the ). Enable FTP Server If you want to allow use of an FTP server, then select this option. •

Port Number Select the port number for the FTP server. The default is 21.

•

Language for Clients Select the appropriate language from the drop-down menu.

Manager Use this section to enable and configure the Manager feature, which lets you specify tasks for the Network Storage System. The advantage is that the Network Storage System can run the task separately, without using your computer. For example, if you order a movie online, then you can have the Network Storage System—instead of your computer— the movie.

Allow Anonymous FTP (“guest” rights) If you want to allow FTP s to anonymously, then select this option. Any FTP can use the word “Anonymous” as the name, and any combination of letters or numbers can be used as the .

Speed Limit Per Task Enter the maximum speed of each task. If you keep the default, 0, then there is no speed limit.

HTTP (Web Browser) Port Number Enter the port number used for HTTP connections to the Network Storage System. This will be used for remote access of the Network Storage System. The default is 80. If you want to change this number, then you should use a number greater than 1024 (8080 is often used). Also, if the port is not 80, you must specify the port in your web browser in order to connect. To do this, add a colon (“:”) and the port number after the address, such as http://192.168.1.77:808 0. (This example assumes the Network Storage System’s IP address is 192.168.1.77, and the port number is 8080.)

Language for URLs Select the appropriate language from the drop-down menu.

Click Save to save your changes, or click Cancel to clear all changes.

Enable Schedule Select this option if you want the Manager to run only during the specified time period. If this option is not selected, then the Manager always runs.

Click Reset to Default to reset the settings on the System Options screen to the factory defaults.

•

Day Select Every Day, or select a specific day of the week.

•

Time Select the hours during which you want the Manager to run.

Use this screen to upgrade the firmware of the Network Storage System. You can also back up or restore its configuration file, which includes the settings of the Network Storage System.

Enable Manager Select this option to enable the Manager feature. s with Manager access can schedule tasks through the My Files > My s screen. Maximum Concurrent Tasks Select the maximum number of tasks that can run at the same time.

Firmware Upgrade

UPnP Enable UPnP Select this option if you want the Network Storage System to broadcast its availability to s and have its own desktop icon on computers that UPnP (such as Windows Vista or XP).

Options Enable Guest s If you want to allow s to use the word “guest” as a name, then select Enable Guest s. istration > Firmware Upgrade Network Storage System with 2 Bays

20


Chapter 3

Current Firmware Use this section to search for updated firmware.

Restore Click Restore to restore a previously saved configuration file. The Restore Configuration File screen appears.

Current Firmware Version The firmware version of the Network Storage System is displayed. Check for Upgrade Click this option to visit the Linksys website, www.linksys.com, and check for updated firmware. Follow the on-screen instructions. After you have ed the new firmware file, extract it on your computer. Then proceed to the “Upgrade” section when you are ready to upgrade the firmware.

Upgrade Use this section to proceed with the firmware upgrade.

Restore Configuration File

Upgrade File Click Browse to select the extracted firmware file.

•

Click Start begin the firmware upgrade. Then follow the on-screen instructions.

Select File Click Browse to select the configuration file on your computer.

•

Options Select the information you want to restore: System Options, s, Shared Folders, and/or Utility Settings. Select All Settings to restore all configuration information except for the disk configuration setting, which cannot be restored.

•

Restore Click this option to restore the previously saved settings you selected in the Options section.

•

Restore to Default Click this option to reset the settings you selected in the Options section to their factory defaults. (Custom settings will be deleted.)

•

Cancel Click this option to exit this screen without making any changes.

Current Firmware, Upgrade, and Configuration Backup

Configuration Backup Back Up Click Back Up to the current configuration file onto your computer. The File screen appears.

Media Server If you use a media adapter to send content to your entertainment system, then you can use the Network Storage System as a media server. The Network Storage System can be located by compatible media adapters using the UPnP AV standard. Media content on the Network Storage System can then be accessed and played by the media adapters. Configure the Network Storage System as a media server on the Media Server screen.

File

Click Save to save the configuration file on your computer, and then follow the on-screen instructions. Click Cancel to cancel the file .


21


Chapter 3

Directory The path and name of the selected folder are displayed. All If you wish, each directory can be limited to a specific media type. The default setting, All, scans for all content types. Select the appropriate media type(s): All, Music, Picture, or Video.

Content Scan Specify the scan behavior of the media server.

istration > Media Server

Media Server Enable Media Server If enabled, the Network Storage System can be located by compatible media adapters using the UPnP AV standard. Media content on the Network Storage System can then be accessed and played by the media adapters. Server Name Enter the name of the media server as it should be displayed on client devices.

Content Directory By default, the root directory of each drive is displayed when the Media Server feature is enabled.

Continuous Scan Select this option if you want the media server to automatically rescan media files when they change. Scheduled Scan in __ Minutes Select this option if you want the media server to scan media files at the specified interval. Then enter the number of minutes in each interval. Scan Now If you want the media server to scan media files at this time, click this option. Click Save to save your changes, or click Cancel to clear all changes.

Disk Utility Use this screen to format or maintain the installed drive(s).

You can specify up to four directories that the media server should scan for media content. Select the appropriate check box to select or deselect a directory. Browse Click Browse. The Folders Browser screen appears.

istration > Disk Utility

Format Disk Use this option to partition and format a newly installed drive if you did not run the Setup Wizard when you physically installed the new drive. Folders Browser

•


•


NOTE: If you physically install a new drive without running the Setup Wizard, then it will not be formatted. You must manually format the new drive using the Format Disk feature.

Click Apply to save the location. Click Close to exit this screen. Network Storage System with 2 Bays

22


Chapter 3

WARNING: Before you format drive(s), back up pre-existing data because all data on your drive(s) will be erased when they are formatted.

remaining memory, and additional partitions cannot be created. Click Apply to save your changes, or click Cancel to clear all changes.

NOTE: The settings on this screen will vary depending on the disk configuration. A single drive is listed as Disk 1. Two drives are listed as Disk 1 and 2 when they are configured as Separate Disks. Two drives are listed as LVM when they are configured as JBOD/LVM. Two drives are listed as RAID 1 when they are configured as RAID 1 (Mirroring). The drives are listed as RAID 0 when they are configured as RAID 0 (Striping). Disk 1-2, LVM, RAID 1, or RAID 0 The status of the drive is displayed. If the drive is not formatted, click Format. A confirmation screen appears.

Format Disk, Scandisk, S.M.A.R.T., Standby, and Disk Full

Scandisk Confirm Reformatting

Click OK to confirm the formatting. Click Cancel to cancel the formatting. USB 1-2 The status of the drive is displayed. If the drive is not formatted, click Format. The Partition & Format screen appears.

The Scandisk program checks the drive(s) for errors and corrects errors when possible. It will run automatically if an error is detected, such as a shutdown due to an unexpected loss of power. While the Scandisk program is running, you will not be able to access the drive being scanned. Disk 1-2, LVM, RAID 1, or RAID 0 The Scandisk status of the drive is displayed. Click Start/Stop to begin the Scandisk program. A confirmation screen appears.

Confirm Scandisk

Partition & Format

•

Model The name of the USB drive is displayed.

•

Total Disk Size The number of MB on the drive is displayed.

•

New Partitions You can specify up to four partitions. For each selected partition, specify its size in MB, or select Fill Up Free Space. If the Fill Up Free Space option is selected, then the partition occupies all


Click OK to confirm running the Scandisk program. Click Cancel to cancel running the Scandisk program. If you need to access the drive while the Scandisk program is running, click Start/Stop to stop the Scandisk program. Run Scandisk You can schedule the Scandisk program to run on a regular schedule. Select the day and time you want the Scandisk program to run. Keep the default, Never, if you want to manually initiate the Scandisk program.

S.M.A.R.T. 23


Chapter 3

Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.) can warn you of impending drive problems before the drive fails. Disk 1-2, LVM, RAID 1, or RAID 0 The S.M.A.R.T. status of the drive is displayed. Click Test Now to begin the S.M.A.R.T. check.

Standby The drive(s) go into standby mode after the specified period of idle time. During standby mode, the Network Storage System uses less energy and emits less heat. If the fan powers off, then noise is also reduced. Set Hard Disk to Standby Mode after Keep the default, Idle 30 minutes, if you want the period of idle time to be 30 minutes. Select Idle 10 minutes, if you want the period of idle time to be 10 minutes. Power off the fan after All Hard Drives are in Standby Mode The fan of the Network Storage System powers off when the drive(s) are idle for a period of time. Keep the default, 20 Minutes, if you want the fan to power off after 20 minutes of inactivity. Select 40 Minutes if you want the fan to power off after 40 minutes of inactivity. Select 10 Minutes if you want the fan to power off after 10 minutes of inactivity. Select Never if you want the fan to always be powered on as long as the Network Storage System is powered on.

Disk Log

Click Refresh to update the on-screen information. Click Close to exit this window.

Disk Configuration Use this screen to change the configuration of your installed drive(s), which are initially configured during the Setup Wizard. If you change the configuration, then the drive(s) must be reformatted; make sure you back up all data on the drive(s) before they are reformatted.

NOTE: During standby mode, the hard drive(s) and fan may activate for a capacity check or other network activity. When there is no more activity, the hard drive(s) will return to standby mode, and then the fan will stop. istration > Disk Configuration

Disk Full When drive capacity is nearly full, the Network Storage System will log it and send an e-mail alert. Send E-Mail Alert when Disk Available Capacity is Less than Keep the default, 2%, if you want to be alerted when less than 2% of the total drive capacity is available. Select 2GB, if you want to be alerted when less than 2 GB is available. Select 5GB, if you want to be alerted when less than 5 GB is available. (After you have finished making changes to the Disk Utility screen, click System Options to enter e-mail address(es) in the E-Mail Alert section.) Click Save to save your changes, or click Cancel to clear all changes. (Clicking Cancel does not affect any operations in progress, including drive formatting, the Scandisk program, and the S.M.A.R.T. check.) Click Disk Log to view a list of disk activities, including Scandisk and S.M.A.R.T. results. The Disk Log screen appears. Network Storage System with 2 Bays

Volume Mode Select the appropriate configuration for your drive usage. WARNING: Before you format drive(s), back up pre-existing data because all data on your drive(s) will be erased when they are formatted.

Maximum Storage Separate Disks Disk 1 and Disk 2 work separately. Multiple Disks (JBOD/LVM) Disk 1 and Disk 2 are bound into one logical volume. Total capacity is equal to the capacity of the existing disk(s). If this configuration is selected with only one disk installed, then the second disk will be configured to extend the capacity of the logical volume when it is installed.

24

Chapter 3


Maximum Security Mirroring (RAID 1) Disk 1 is mirrored into Disk 2. Total capacity is equal to the capacity of the smaller disk. NOTE: Mirroring (RAID 1) and Striping (RAID 0) require two hard drives.

Maximum Speed Striping (RAID 0) Disk 1 and Disk 2 are striped into one logical volume. Total capacity is equal to two times the smaller capacity of the two disks. Click Save to save your change.


25

Use

Chapter 4

Chapter 4: Use This chapter describes access rights, access methods, and use of USB storage devices. WARNING: Do not block the air vents, and do not stack devices on top of the Network Storage System; otherwise, overheating can occur. (Air vents are located on the sides of the Network Storage System. Keep the area around the Network Storage System clear.)

Web Access To access the Network Storage System from any computer using a web browser, follow these instructions: 1. Open your web browser. 2. In the Address field, enter http:// . If you do not know its IP address, then run the Setup Wizard. Click the Click Here to Start button. Then click Advanced Setup. Select the appropriate Network Storage System, and its IP address will be displayed. (For more information, refer to “Chapter 2: Configuration Using the Setup Wizard”.)

Access to the Network Storage System

3. The web-based utility appears.

All Windows s can access the Network Storage System with guest access rights. Specifically, guest s can access any shared folders with access rights for guest s and any connected USB storage devices.

Access My Files Click this option to access folders or change your .

Linksys recommends that you create a for each , so each will have a unique and personal folder. (The name will be used as the name of the personal folder.)

On the homepage, you have two options:

istration Click this option to manage the Network Storage System through the web-based utility. For more information, refer to “Chapter 3: Advanced Configuration”.

How to Access the Network Storage System There are two ways to access the Network Storage System. The first way uses the My Network Places or Network Neighborhood icon on the desktop of your Windows operating system. The second way uses your web browser. Access is controlled by name and .

Windows Access To access the Network Storage System from a Windowsbased computer, follow these instructions: 1. Double-click the My Network Places or Network Neighborhood icon. 2. Double-click the Network Storage System. If you do not see it, then change the Workgroup of the Network Storage System to match the Workgroup of your computer (refer to the istration > Systems Options section of “Chapter 3: Advanced Configuration”).

Home Screen

My Files Any has access to the My Files section. To access folders or change your : 1. Click Access My Files. 2. Enter your information in the name and fields. 3. Click OK.

3. If prompted, enter your name and . If you do not have a , enter guest for the name. Leave the field blank.

4. The Files screen appears. You have two options available, Files and Personal Info, in the My Files column.

If you want to map a shared folder to a drive letter on your computer, refer to Windows Help for details, or use the Network Drive Mapping Utility (refer to the section, “How to Use the Network Drive Mapping Utility”).

If the Manager feature has been enabled through the istration > System Options screen and your has Manager access, then the My s option will also be displayed.


26

Use

Chapter 4

NOTE: The Manager feature lets you specify tasks for the Network Storage System. The advantage is that the Network Storage System can run the task separately, without using your computer. For example, if you order a movie online, then you can have the Network Storage System—instead of your computer— the movie.

My Files > Files The Files screen displays a list of folders that you can access, according to your .

My Files > My s

Manager The status of the Manager feature is displayed. Name Your name is displayed. Maximum Concurrent Tasks The maximum number of tasks that can run at the same time is displayed. For each task, the screen lists the File Name, File Size, Progress, Speed, and Status information. Add Task Click this option to add a new task to the Network Storage System. A new screen appears. My Files > Files

Public Folders These are shared folders accessible to everyone. Disk 1 and Disk 2 are listed as PUBLIC DISK 1 (Public Data) and PUBLIC DISK 2 (Public Data). Private Folders These are your personal folder and the folders associated with your . USB Storage Devices All s have access to the devices connected to the Network Storage System. USB devices can be used to add or move content.

Create New Task

Click the folder you want to access. To view a file, click the filename. To a file, right-click the filename and select Save Target as...

Source

Click Refresh for the most up-to-date information about the folders.

•

URL Enter the URL of the FTP or HTTP URL.

•

Destination Click Browse. The Folders Browser screen appears.

My Files > My s If the Manager feature has been enabled through the istration > System Options screen and your has Manager access, then the My s screen will be available.


27

Use

Chapter 4

4. Enter your new in the New and Confirm New fields. 5. Click Save to save your new , or click Cancel to clear your change.

Folders Browser

–


–


Click Apply to save the location. Click Close to exit this screen. •

The Remote Server Requires Authentication If authentication is required to access the URL, select this feature, and complete the following: –

Name Enter the name used to access the URL.

–

Enter the used to access the URL. NOTE: For more information about authentication for the remote server, the of the remote server.

Click Save to save the new task, or click Cancel to clear your changes. Start/Stop Select the appropriate task, and then click Start/Stop to start or stop the selected task. Cancel If you want to delete a task, select it, and then click Cancel. (Completed tasks are not automatically deleted, so you will have to manually delete them.) Refresh Click Refresh to update the on-screen status information.

My Files > Personal Info

USB Storage Devices You can connect USB storage devices to the USB ports at any time. s do not apply to USB storage devices. All folders and files on those devices are available to all s while the USB storage devices are connected to the Network Storage System. For convenience, you can use the Network Drive Mapping Utility to map a connected USB storage device as a network drive on your computer. You can also use the utility to remove the device.

How to Add a USB Storage Device To add a USB storage device, connect the device to the USB 1 or USB 2 port. When the corresponding USB LED lights up, the USB device is available for use.

How to Remove a USB Storage Device To safely remove a USB storage device: 1. Linksys recommends that you wait until the device is not being used, when its USB LED is continuously lit. Press the USB 1 button to eject the device from the USB 1 port, or press the USB 2 button to eject the device from the USB 2 port.

My Files > Personal Info Any can change the to the My Files section. To change your : 1. Click Personal Info. 2. Enter your name in the Name field. 3. Enter your current in the Current field. Network Storage System with 2 Bays

Back 28

Use

Chapter 4

2. After the Network Storage System beeps once and the appropriate USB LED powers off, disconnect the device.

3. The Shared Folder Mapping screen appears. Select the appropriate Network Storage System.

You can also use the Network Drive Mapping Utility to remove the device. This is explained in the following section, “How to Use the Network Drive Mapping Utility”.

How to Use the Network Drive Mapping Utility Any can use the Network Drive Mapping Utility to do the following: •

Map a shared folder to a drive letter on a computer

•

Map a USB storage device to a drive letter on a computer

•

Safely remove a USB storage device from the Network Storage System

(If you do not have this utility installed, you can still use Windows to manually map a shared folder or USB storage device to a drive letter. Refer to Windows Help for more information.)

Shared Folder Mapping

4. Select the appropriate shared folder. If you do not see the folder you want, click Refresh. 5. Keep the default drive letter, or select a different letter from the drop-down menu. Then click Map. 6. The shared folder automatically opens, and a new window appears to notify you that the shared folder has been mapped. Click OK.

If the utility has not been installed, run the Setup Wizard. Refer to “Chapter 2: Configuration Using the Setup Wizard”.

System Tray Icon While the utility is running, its icon is displayed in the system tray, which is located in the lower right corner of your desktop.

Shared Folder Mapped

7. On the Shared Folder Mapping screen, click Close. 8. Double-click My Computer. The shared folder is displayed as a network drive.

How to Map a USB Storage Device System Tray Icon

If the utility is not running, proceed to the “Desktop Icon” or “Program Folder” section for information on how to activate the utility.

How to Map a Shared Folder

1. Right-click the icon in the system tray. 2. Click USB Device Mapping. 3. The Map Network Drive screen appears. Keep the default drive letter or enter a different letter in the Drive field.

1. Right-click the system tray icon.

Map Network Drive Right-Click Icon

2. Click Shared Folder Mapping.

4. Keep the default, Reconnect at logon, if you want the USB storage device to re-connect automatically. 5. Click OK. 6. Double-click My Computer. The USB storage device displays as a network drive.


29

Use

Chapter 4

How to Remove a USB Storage Device

Program Folder

1. Right-click the icon in the system tray. 2. Click Safely Remove USB Device.

If the utility is inactive, its icon is not displayed in the system tray.

3. Select the appropriate USB storage device, and click Eject. If you do not see the device you want, click Refresh.

If you need to map a shared folder or USB storage device, or you need to remove a USB storage device, then proceed to the “Activate the Utility” section.

Activate the Utility 1. Click Start. 2. Select All Programs. 3. Select Network Drive Mapping Utility. 4. Click Network Drive Mapping Utility.

Program Folder

The utility runs, and its icon appears in the system tray. Refer to the section, “System Tray Icon”, for details.

Uninstall the Utility Select USB Device

4. A message notifies you when the device can be removed. Click OK.

To remove the utility from your computer: 1. Click Start. 2. Select All Programs. 3. Select Network Drive Mapping Utility. 4. Click Uninstall.

USB Device Can Be Removed

5. A confirmation screen appears. Click Yes to confirm removal of the utility, or click No to cancel removal of the utility.

To exit the utility, right-click the icon in the system. Then click Exit.

Desktop Icon If the utility is inactive, its icon is not displayed in the system tray. If you need to map a shared folder or USB storage device, or you need to remove a USB storage device, then doubleclick the desktop icon.

Desktop Icon

The utility runs, and its icon appears in the system tray. Refer to the section, “System Tray Icon”, for details.


30

Troubleshooting

Appendix A

Appendix A: Troubleshooting The Setup Wizard does not detect any Network Storage Systems. Follow these instructions until your problem is solved: 1. Make sure the Network Storage System is powered on. 2. Check the cable connections of the Network Storage System. 3. Make sure your computer and the Network Storage System are on the same network segment. (If you do not have a router, then skip this step.) 4. In all Windows operating systems, the T/IP protocol is installed by default. If you have uninstalled the T/IP protocol, refer to Windows Help for instructions on how to re-install the T/IP protocol. 5. During the Setup Wizard, select Automatically obtain an IP address (DH recommended) if your local network has a DH server (usually a router) asg IP addresses, or select Set IP configuration manually if your local network does not have a DH server. If you selected Set IP configuration manually, then complete the IP Address, Subnet Mask, and Gateway fields. The range commonly used for IP addresses is 192.168.1.1 to 192.168.1.254, with a Subnet Mask of 255.255.255.0. (Each device on your local network requires a unique IP address and the same Subnet Mask.) You cannot access the web-based utility of the Network Storage System. Check the IP address of the Network Storage System. By default, the Network Storage System uses a dynamic IP address assigned by your DH server (usually a router); run the Setup Wizard or check the router’s utility for the current IP address of the Network Storage System. If your network does not have a DH server, run the Setup Wizard to assign an appropriate static IP address to the Network Storage System (make sure this static IP address is within the IP address range used by your network). You have configured the Network Storage System is configured, but you do not see it in My Network Places or Network Neighborhood. Change the Workgroup of the Network Storage System to match the Workgroup of your computer (refer to the istration > System Options section of “Chapter 3: Advanced Configuration”). If this does not work, follow these instructions until your problem is solved: Network Storage System with 2 Bays

1. Click Start. Click Search. Click Computers or people. Click A computer on the network. Enter the name of the Network Storage System, and click Search. 2. In all Windows operating systems, the T/IP protocol is installed by default. If you have uninstalled the T/IP protocol, refer to Windows Help for instructions on how to re-install the T/IP protocol. 3. Click Start. Select Control . Right-click Network Connections. Click Open. Click Advanced. Click Advanced Settings. Select the Local Area Connection you are using. In the Bindings for Local Area Connection section, make sure these two settings, File and Printer Sharing for Microsoft Networks and Client for Microsoft Networks, are selected. If not, select them. Then click OK. 4. If your local network has a DH server (usually a router), run the Setup Wizard and make sure the Network Storage System is on the same network segment as your computer. (If you do not have a router, then skip this step.) 5. If your local network does not have a DH server (usually a router), make sure the IP address of your computer is compatible with the IP address of the Network Storage System. The range commonly used for IP addresses is 192.168.1.1 to 192.168.1.254, with a Subnet Mask of 255.255.255.0. (Each device on your local network requires a unique IP address and the same Subnet Mask.) When you click the Network Storage System icon in My Network Places or Network Neighborhood, you are prompted for a . One of the following situations may have occurred: •

The Network Storage System recognizes the Windows name you used to to your computer, but it does not recognize the . At the prompt, enter your for the Network Storage System. (Later you can change your Windows to make it match the Network Storage System .)

•

The Network Storage System does not recognize the Windows name you used to to your computer, so it recognizes you as a guest with guest access rights. Use the Setup Wizard or web-based utility of the Network Storage system to create an for your Windows name.

•

You do NOT have permission to access the Network Storage System. Use the Setup Wizard or web-based utility to assign the appropriate level of access to your .

31

Appendix A

NOTE: Windows uses the computer name as the default name on the screen. To create a new Windows name, enter a new name and on the screen.

Troubleshooting

WEB: If your questions are not addressed here, refer to the Linksys website, www.linksys.com

You connected the USB flash disk to the Network Storage System and mapped it as a drive. Now you have disconnected the USB flash disk from the Network Storage System and connected it directly to your computer. The USB flash disk reads as a disconnected network drive. Windows maps both the network drive (USB flash disk connected through the Network Storage System) and local drive (USB flash disk connected directly to the computer) to the same drive letter. You can still doubleclick the disconnected network drive to access the USB flash disk. You can also follow these instructions to map the local USB flash disk to a different drive letter: 1. Right-click My Computer. 2. Click Manage. 3. Click Disk Management. 4. Right-click the USB flash disk. 5. Click Change Drive Letter and Paths. 6. Select a different drive letter, and click OK. 7. Click OK to confirm the change. 8. Click OK again. If you wish, you can reassign the former drive letter after the computer is restarted. You were not able to map a shared folder using the Network Drive Mapping Utility. Your computer is not able to locate the Network Storage System by using its device name, so instead you have to use its IP address and manually map a shared folder in Windows. (If the Network Storage System uses a dynamic IP address assigned by your network router, then run the Setup Wizard or check the router’s utility for the current IP address of the Network Storage System.) Follow these instructions: 1. Right-click the My Network Places icon. 2. Click Map Network Drive. 3. On the Map Network Drive screen, enter the folder location using the IP address, \\ (for example, \\192.168.1.100\holidaypictures), instead of the device name. 4. Click different name. 5. The Connect As... screen appears. Enter your name and . Click OK. 6. On the Map Network Drive screen, click Finish.


32

Specifications

Appendix B

Appendix B: Specifications Model

NAS200

Standards

IEEE 802.3, IEEE 802.3u

Ports

Power, Ethernet, USB 1, USB 2

Buttons

Power, USB 1, USB 2, RESET, BACK UP

LEDs

Power, Ethernet, Disk (Act, Full, 1, 2), USB 1, USB 2

Cabling Type

UTP CAT5 or Better

Security Features

Name and for Both System istration and File Access

Environmental Dimensions

6.69" x 4.49" x 7.68" (170 x 114 x 195 mm)

Weight

1.97 lb (893 g)

Power

12V DC, 5A, Switching, 100-240V AC, 50-60Hz, Power Adapter Provided

Certification

FCC, CE

Operating Temp.

41 to 104ºF (5 to 40ºC)

Storage Temp.

14 to 140ºF (–10 to 60ºC)

Operating Humidity

10 to 80% Noncondensing

Storage Humidity

5 to 90% Noncondensing


33

Appendix C

Appendix C: Warranty Information Limited Warranty Linksys warrants to You that, for a period of one year (the "Warranty Period"), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys’ entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates. This limited warranty extends only to the original purchaser. If the Product proves defective during the Warranty Period call Linksys Technical in order to obtain a Return Authorization Number, if applicable. BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. If You are requested to return the Product, mark the Return Authorization Number clearly on the outside of the package and include a copy of your original proof of purchase. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. You are responsible for shipping defective Products to Linksys. Linksys pays for UPS Ground shipping from Linksys back to You only. Customers located outside of the United States of America and Canada are responsible for all shipping and handling charges.

Warranty Information TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. The foregoing limitations will apply even if any warranty or remedy provided under this Agreement fails of its essential purpose. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to You. Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623.

ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON‑INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You. This warranty gives You specific legal rights, and You may also have other rights which vary by jurisdiction. This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident. In addition, due to the continual development of new techniques for intruding upon and attacking networks, Linksys does not warrant that the Product will be free of vulnerability to intrusion or attack.


34

Appendix C

Appendix C: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the is encouraged to try to correct the interference by one or more of the following measures: •

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment or devices

•

Connect the equipment to an outlet other than the receiver’s

•

Consult a dealer or an experienced radio/TV technician for assistance

Regulatory Information Règlement d’Industry Canada Cet appareil est conforme à la norme NMB003 d’Industrie Canada. Le fonctionnement est soumis aux conditions suivantes : 1. Ce périphérique ne doit pas ca d’interférences; 2. Ce périphérique doit accepter toutes les interférences reçues, y compris celles qui risquent d’entraîner un fonctionnement indésirable.

Safety Notices Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line cord. Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. WARNING: This product contains lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.

Industry Canada Statement This device complies with Industry Canada ICES-003 rule. Operation is subject to the following two conditions: 1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Network Storage System with 2 Bays

35

Appendix C

Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for s with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:

Regulatory Information Ceština (Czech) - Informace o ochraně životního prostředí pro zákazníky v zemích Evropské unie Evropská směrnice 2002/96/ES zakazuje, aby zařízení označené tímto symbolem na produktu anebo na obalu bylo likvidováno s netříděným komunálním odpadem. Tento symbol udává, že daný produkt musí být likvidován odděleně od běžného komunálního odpadu. Odpovídáte za likvidaci tohoto produktu a dalších elektrických a elektronických zařízení prostřednictvím určených sběrných míst stanovených vládou nebo místními úřady. Správná likvidace a recyklace pomáhá předcházet potenciálním negativním dopadům na životní prostředí a lidské zdraví. Podrobnější informace o likvidaci starého vybavení si laskavě vyžádejte od místních úřadů, podniku zabývajícího se likvidací komunálních odpadů nebo obchodu, kde jste produkt zakoupili.

Dansk (Danish) - Miljøinformation for kunder i EU

English - Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please your local authorities, waste disposal service, or the shop where you purchased the product.

Български (Bulgarian) - Информация относно опазването на околната среда за потребители в Европейския съюз Европейска директива 2002/96/EC изисква уредите, носещи този символ върху изделието и/или опаковката му, да не се изхвърля т с несортирани битови отпадъци. Символът обозначава, че изделието трябва да се изхвърля отделно от сметосъбирането на обикновените битови отпадъци. Ваша е отговорността този и другите електрически и електронни уреди да се изхвърлят в предварително определени от държавните или общински органи специализирани пунктове за събиране. Правилното изхвърляне и рециклиране ще спомогнат да се предотвратят евентуални вредни за околната среда и здравето на населението последствия. За по-подробна информация относно изхвърлянето на вашите стари уреди се обърнете към местните власти, службите за сметосъбиране или магазина, от който сте закупили уреда.


EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol på produktet og/eller emballagen ikke må bortskaffes som usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. Det er dit ansvar at bortskaffe dette og andet elektrisk og elektronisk udstyr via bestemte indsamlingssteder udpeget af staten eller de lokale myndigheder. Korrekt bortskaffelse og genvinding vil hjælpe med til at undgå mulige skader for miljøet og menneskers sundhed. Kontakt venligst de lokale myndigheder, renovationstjenesten eller den butik, hvor du har købt produktet, angående mere detaljeret information om bortskaffelse af dit gamle udstyr.

Deutsch (German) - Umweltinformation für Kunden innerhalb der Europäischen Union Die Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist , nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische und elektronische Geräte über die dafür zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle negative Folgen für Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt erworben haben.

36

Appendix C

Regulatory Information

Eesti (Estonian) - Keskkonnaalane informatsioon Euroopa Liidus asuvatele klientidele

Français (French) - Informations environnementales pour les clients de l’Union européenne

Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on seeid, millel on tootel või pakendil käesolev sümbol , keelatud kõrvaldada koos sorteerimata olmejäätmetega. See sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva ja ka muud elektri- ja elektroonikaseed riigi või kohalike ametiasutuste poolt ette nähtud kogumispunktide kaudu. Seete korrektne kõrvaldamine ja ringlussevõtt aitab vältida võimalikke negatiivseid tagajärgi keskkonnale ning inimeste tervisele. Vanade seete kõrvaldamise kohta täpsema informatsiooni saamiseks võtke palun ühendust kohalike ametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust te toote ostsite.

La directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout autre matériel électrique ou électronique par les moyens de collecte indiqués par le gouvernement et les pouvoirs publics des collectivités territoriales. L’élimination et le recyclage en bonne et due forme ont pour but de lutter contre l’impact néfaste potentiel de ce type de produits sur l’environnement et la santé publique. Pour plus d’informations sur le mode d’élimination de votre ancien équipement, veuillez prendre avec les pouvoirs publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit.

Español (Spanish) - Información medioambiental para clientes de la Unión Europea La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estará contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto.

ξλληνικά (Greek) - Στοιχεία περιβαλλοντικής προστασίας για πελάτες εντός της Ευρωπαϊκής Ένωσης Η Κοινοτική Οδηγία 2002/96/EC απαιτεί ότι ο εξοπλισμός ο οποίος φέρει αυτό το σύμβολο στο προϊόν και/ή στη συσκευασία του δεν πρέπει να απορρίπτεται μαζί με τα μικτά κοινοτικά απορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θα πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος και άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω των καθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων οι οποίες παρέχονται από το κράτος ή τις αρμόδιες τοπικές αρχές. Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψη πιθανών αρνητικών συνεπειών για το περιβάλλον και την υγεία. Για περισσότερες πληροφορίες σχετικά με την απόρριψη του παλιού σας εξοπλισμού, παρακαλώ επικοινωνήστε με τις τοπικές αρχές, τις υπηρεσίες απόρριψης ή το κατάστημα από το οποίο αγοράσατε το προϊόν.


Italiano (Italian) - Informazioni relative all’ambiente per i clienti residenti nell’Unione Europea La direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. È responsabilità del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per l’ambiente e per la salute dell’essere umano. Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto.

Latviešu valoda (Latvian) - Ekoloģiska informācija klientiem Eiropas Savienības jurisdikcijā Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst izmest nešķirotā veidā kopā ar komunālajiem atkritumiem (tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar parastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šo un citas elektriskas un elektroniskas ierīces izmest atkritumos, izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos un pārstrāde tiek veikta pareizi, tad mazinās iespējamais kaitējums dabai un cilvēku veselībai. Sīkākas ziņas par novecojuša aprīkojuma izmešanu atkritumos jūs varat saņemt vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā, kur iegādājāties šo izstrādājumu.

37

Appendix C


Lietuvškai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sąjungos vartotojams

Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese Unie

Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį), negalima šalinti kartu su nerūšiuotomis komunalinėmis atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad ši ir kita elektros ar elektroninė įranga būtų šalinama per tam tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo sistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengta galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos apie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose įsigijote tą gaminį.

De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool op het product of de verpakking, niet mag worden ingezameld met niet-gescheiden huishoudelijk afval. Dit symbool geeft aan dat het product apart moet worden ingezameld. U bent zelf verantwoordelijk voor de vernietiging van deze en andere elektrische en elektronische apparatuur via de daarvoor door de landelijke of plaatselijke overheid aangewezen inzamelingskanalen. De juiste vernietiging en recycling van deze apparatuur voorkomt mogelijke negatieve gevolgen voor het milieu en de gezondheid. Voor meer informatie over het vernietigen van uw oude apparatuur neemt u op met de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft.

Malti (Maltese) - Informazzjoni Ambjentali għal Klijenti fl-Unjoni Ewropea

Norsk (Norwegian) - Miljøinformasjon for kunder i EU

Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih issimbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax jintrema ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu jindika li dan il-prodott għandu jintrema separatament minn ma’ liskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi dan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettroniku permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħin jipprevjeni konsegwenzi negattivi potenzjali għall-ambjent u għas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljata dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew il-ħanut minn fejn xtrajt il-prodott.

EU-direktiv 2002/96/EF krever at utstyr med følgende symbol avbildet på produktet og/eller pakningen, ikke må kastes sammen med usortert avfall. Symbolet indikerer at dette produktet skal håndteres atskilt fra ordinær avfallsinnsamling for husholdningsavfall. Det er ditt ansvar å kvitte deg med dette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger slik myndighetene eller kommunene bestemmer. Korrekt avfallshåndtering og gjenvinning vil være med på å forhindre mulige negative konsekvenser for miljø og helse. For nærmere informasjon om håndtering av det kasserte utstyret ditt, kan du ta kontakt med kommunen, en innsamlingsstasjon for avfall eller butikken der du kjøpte produktet.

Magyar (Hungarian) - Környezetvédelmi információ az európai uniós vásárlók számára

Polski (Polish) - Informacja dla klientów w Unii Europejskiej o przepisach dotyczących ochrony środowiska

A 2002/96/EC számú európai uniós irányelv megkívánja, hogy azokat a termékeket, amelyeken, és/vagy amelyek csomagolásán az alábbi címke megjelenik, tilos a többi szelektálatlan lakossági hulladékkal együtt kidobni. A címke azt jelöli, hogy az adott termék kidobásakor a szokványos háztartási hulladékelszállítási rendszerektõl elkülönített eljárást kell alkalmazni. Az Ön felelõssége, hogy ezt, és más elektromos és elektronikus berendezéseit a kormányzati vagy a helyi hatóságok által kijelölt gyűjtõredszereken keresztül számolja fel. A megfelelõ hulladékfeldolgozás segít a környezetre és az emberi egészségre potenciálisan ártalmas negatív hatások megelõzésében. Ha elavult berendezéseinek felszámolásához további részletes információra van szüksége, kérjük, lépjen kapcsolatba a helyi hatóságokkal, a hulladékfeldolgozási szolgálattal, vagy azzal üzlettel, ahol a terméket vásárolta.


Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt oznaczony symbolem znajdującym się na produkcie i/lub jego opakowaniu nie był wyrzucany razem z innymi niesortowanymi odpadami komunalnymi. Symbol ten wskazuje, że produkt nie powinien być usuwany razem ze zwykłymi odpadami z gospodarstw domowych. Na Państwu spoczywa obowiązek wyrzucania tego i innych urządzeń elektrycznych oraz elektronicznych w punktach odbioru wyznaczonych przez władze krajowe lub lokalne. Pozbywanie się sprzętu we właściwy sposób i jego recykling pomogą zapobiec potencjalnie negatywnym konsekwencjom dla środowiska i zdrowia ludzkiego. W celu uzyskania szczegółowych informacji o usuwaniu starego sprzętu, prosimy zwrócić się do lokalnych władz, służb oczyszczania miasta lub sklepu, w którym produkt został nabyty.

38

Appendix C


Português (Portuguese) - Informação ambiental para clientes da União Europeia

Slovenčina (Slovene) - Okoljske informacije za stranke v Evropski uniji

A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este símbolo no produto e/ou na sua embalagem não seja eliminado junto com os resíduos municipais não separados. O símbolo indica que este produto deve ser eliminado separadamente dos resíduos domésticos regulares. É da sua responsabilidade eliminar este e qualquer outro equipamento eléctrico e electrónico através das instalações de recolha designadas pelas autoridades governamentais ou locais. A eliminação e reciclagem correctas ajudarão a prevenir as consequências negativas para o ambiente e para a saúde humana. Para obter informações mais detalhadas sobre a forma de eliminar o seu equipamento antigo, e as autoridades locais, os serviços de eliminação de resíduos ou o estabelecimento comercial onde adquiriu o produto.

Evropska direktiva 2002/96/EC prepoveduje odlaganje opreme, označene s tem simbolom – na izdelku in/ali na embalaži – med običajne, nerazvrščene odpadke. Ta simbol opozarja, da je treba izdelek odvreči ločeno od preostalih gospodinjskih odpadkov. Vaša odgovornost je, da to in preostalo električno in elektronsko opremo odnesete na posebna zbirališča, ki jih določijo državne ustanove ali lokalna uprava. S pravilnim odlaganjem in recikliranjem boste preprečili morebitne škodljive vplive na okolje in zdravje ljudi. Če želite izvedeti več o odlaganju stare opreme, se obrnite na lokalno upravo, odpad ali trgovino, kjer ste izdelek kupili.

Română (Romanian) - Informaţii de mediu pentru clienţii din Uniunea Europeană Directiva europeană 2002/96/CE impune ca echipamentele care prezintă acest simbol pe produs şi/sau pe ambalajul acestuia să nu fie casate împreună cu gunoiul menajer municipal. Simbolul indică faptul că acest produs trebuie să fie casat separat de gunoiul menajer obişnuit. Este responsabilitatea dvs. să casaţi acest produs şi alte echipamente electrice şi electronice prin intermediul unităţilor de colectare special desemnate de guvern sau de autorităţile locale. Casarea şi reciclarea corecte vor ajuta la prevenirea potenţialelor consecinţe negative asupra sănătăţii mediului şi a oamenilor. Pentru mai multe informaţii detaliate cu privire la casarea acestui echipament vechi, aţi autorităţile locale, serviciul de salubrizare sau magazinul de la care aţi achiziţionat produsul.

Slovenčina (Slovak) - Informácie o ochrane životného prostredia pre zákazníkov v Európskej únii Podľa európskej smernice 2002/96/ES zariadenie s týmto symbolom na produkte a/alebo jeho balení nesmie byť likvidované spolu s netriedeným komunálnym odpadom. Symbol znamená, že produkt by sa mal likvidovať oddelene od bežného odpadu z domácností. Je vašou povinnosťou likvidovať toto i ostatné elektrické a elektronické zariadenia prostredníctvom špecializovaných zberných zariadení určených vládou alebo miestnymi orgánmi. Správna likvidácia a recyklácia pomôže zabrániť prípadným negatívnym dopadom na životné prostredie a zdravie ľudí. Ak máte záujem o podrobnejšie informácie o likvidácii starého zariadenia, obráťte sa, prosím, na miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov alebo obchod, v ktorom ste si produkt zakúpili.

Suomi (Finnish) - Ympäristöä koskevia tietoja EUalueen asiakkaille EU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoa ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana. Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään tavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittää tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet viemällä tuote tai tuotteet viranomaisten määräämään keräyspisteeseen. Laitteiston oikea hävittäminen estää mahdolliset kielteiset vaikutukset ympäristöön ja ihmisten terveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavasta saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä myymälästä, josta ostit tuotteen.

Svenska (Swedish) - Miljöinformation för kunder i Europeiska unionen Det europeiska direktivet 2002/96/EC kräver att utrustning med denna symbol på produkten och/eller förpackningen inte får kastas med osorterat kommunalt avfall. Symbolen visar att denna produkt bör kastas efter att den avskiljts från vanligt hushållsavfall. Det faller på ditt ansvar att kasta denna och annan elektrisk och elektronisk utrustning på fastställda insamlingsplatser utsedda av regeringen eller lokala myndigheter. Korrekt kassering och återvinning skyddar mot eventuella negativa konsekvenser för miljön och personhälsa. För mer detaljerad information om kassering av din gamla utrustning kontaktar du dina lokala myndigheter, avfallshanteringen eller butiken där du köpte produkten.

WEB: For additional information, please visit www.linksys.com

7060110NC-JL Network Storage System with 2 Bays

39

Linksys Nas200 5z1j29

Overview 3z723u

More details 2i4a6q

Related Documents g842

Linksys Nas200 5z1j29

Linksys Nas200 _ Guide - Page 22 512q29

Rv042 Linksys 3k253s

Linksys Rebate.pdf 4l4i45

Linksys - Spa8000 3o4n1h

Linksys Guide 1b3z2d

More Documents from "Rob Hilliard" 6c371

Linksys Nas200 5z1j29

Maytag Dryer Installation Manual 203bb

Pan Digital Ereader Tablet E166635 Quick-start-guide 5v335e

Maytag Washer Installation Manual 266k46

Pocket Mirror g2l4

Dell Xps 430 Quick Ref Guide G884da00mr 2zw6y