And I Thought I Knew Qtp - Qtp Concepts Unplugged 5630b

And I thought I knew QTP! QTP Concepts Unplugged

By Tarun Lalwani

Publisher: KnowledgeInbox Technical Editor & Reviewer: Anshoo Arora Editor: Chhanda Burmaan Illustrations by Jophy Joy ISBN: 978-0-9836759-0-7 © 2011 KnowledgeInbox. All rights reserved. Printing History: September 2011: First Edition Copyright © 2011 Hewlett-Packard Caribe B.V. Reproduced with Permission No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except as permitted under Sections 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the KnowledgeInbox. online at KnowledgeInbox.com/-us. Source codes discussed in this book can be copied, modified or distributed without permission from author/publisher by including the below reference comment header. 'Source code taken from "And I thought I knew QTP! - QTP Concepts Unplugged" By Tarun Lalwani' 'The link for s is KnowledgeInbox.com/demos/ QTPConceptsUnplugged_SourceCodes.zip' 'Website: KnowledgeInbox.com/books/qtp-concepts-unplugged' This document also contains ed trademarks, trademarks and service marks that are owned by their respective companies or organizations. Publisher and the author disclaim any responsibility for specifying which marks are owned by which companies or organizations. LIMIT OF LIABILITY/DISCLAIMER OF WARRANTY: THE PUBLISHER AND THE AUTHOR MAKE NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS WORK AND SPECIFICALLY DISCLAIM ALL WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. NO WARRANTY MAY BE CREATED OR EXTENDED BY SALES OR PROMOTIONAL MATERIALS. THE ADVICE AND STRATEGIES CONTAINED HEREIN MAY NOT BE SUITABLE FOR EVERY SITUATION. THIS WORK IS SOLD WITH THE UNDERSTANDING THAT THE PUBLISHER IS NOT ENGAGED IN RENDERING LEGAL, ING, OR OTHER PROFESSIONAL SERVICES. IF PROFESSIONAL ASSISTANCE IS REQUIRED, THE SERVICES OF A COMPETENT PROFESSIONAL PERSON SHOULD BE SOUGHT. NEITHER THE PUBLISHER NOR THE AUTHOR SHALL BE LIABLE FOR DAMAGES ARISING HEREFROM. THE FACT THAT AN ORGANIZATION OR WEBSITE IS REFERRED TO IN THIS WORK AS A CITATION AND/OR A POTENTIAL SOURCE OF FURTHER INFORMATION DOES NOT MEAN THAT THE AUTHOR OR THE PUBLISHER ENDORSES THE INFORMATION THE ORGANIZATION OR WEBSITE MAY PROVIDE OR RECOMMENDATIONS IT MAY MAKE. FURTHER, READERS SHOULD BE AWARE THAT INTERNET WEBSITES LISTED IN THIS WORK MAY HAVE CHANGED OR DISAPPEARED BETWEEN WHEN THIS WORK WAS WRITTEN AND WHEN IT IS READ.

Dedication

Eyes are a gift of God to us, to be able to see how beautiful this world is. But there are few souls out there who are not blessed with this Gift. I would like to dedicate this book to those who are visually impaired or blind, and have to work harder for every day-to-day challenge. I promise to donate 2% of the profits generated from this book to institutes helping visually impaired people.

Foreword Elfriede Dustin In recent times, many IT companies have realized that software testing needs to be an integral part of their R&D efforts. Companies on the leading edge of software development, such as Google or Facebook, recognize the need for automated testing 1 approaches. For example, Facebook “is safely updated with hundreds of changes including bug fixes, new features, and product improvements. Given hundreds of engineers, thousands of changes every week and hundreds of millions of s worldwide,” Facebook relies on their automated testing program that includes unit and water (GUI) 2 testing as part of their release efforts. Another example, Google “uses a product team that produces internal and open source productivity tools that are consumed by all walks of engineers across the company. They build and maintain code analyzers, IDEs, test case management systems, automated testing tools, build systems, source control systems, code review schedulers, bug databases... The idea is to make the tools that make engineers more productive. Tools are a very large part of the strategic goal of prevention over detection.” The message is clear: quality software can’t be released without an effective automated testing program. Numerous automated testing tools are available to these efforts and one of the most popular 3rd party automated testing tools is HP’s QuickTest Professional3 : “HP continues to be the dominant player in the market, with a presence in virtually every large enterprise. …. Its position requires all other players to position around HP’s tools, and is strong enough that several competitors also have integration to HP products. Virtually all SIs, outsourcing providers and testing consultancies the HP product line, making it easy for organizations to find experienced testers. SAP now resells HP testing tools as part of its overall quality solution. …HP has grown its breadth in the quality space through acquisition, adding strong offerings for security analysis. New product releases in 2010, and planned for 2011, show that HP has retrenched in technical innovation to extend the breadth of its quality solutions (adding test data

management and manual testing) and participate in a wider portion of the ALM market. …The company has a broad set of tools for software quality, including: Functional Testing (including QTP),” among many other tools. A dominant tool such as QTP needs to be accompanied by a “How to..” book. Tarun Lalwani has taken an encouraging lead in providing valuable QTP information to help educate new and experienced QTP s, with his first book ‘QuickTest Professional Unplugged’ and now followed it up with ‘And I thought I knew QTP!’ With this book, Tarun has come up with a ‘must-read’ guide that can help a implement successful QTP testing programs and efforts. Even though the book is about a dry topic such as QTP automation, it is well written and entertaining and in the format of an ‘interview’. It gives a thorough dissection of many possible QTP problems via various QTP questions and answers. This book articulates solutions to most QTP issues a will run into and provides timely and necessary material for any QTP – beginner or advanced. Elfriede Dustin Automated Software Testing Evangelist www.idtus.com

Elfriede Dustin, an IT veteran with over 20 years of experience behind her, has authored and co-authored various books on Software Testing like ‘Quality Web Systems’, ‘The Art of Software Security Testing’, ‘Automated Software Testing’, ‘Effective Software Testing’ and ‘Implementing Automated Software Testing’. She currently works for ITD. 1 https://www.facebook.com/ Engineering#!/video/video.php?v=101002591 01684977&oid=9445547199&comments

2 http://googletesting.blogspot. com/2011/01/how-google-tests-software. html

3  http://www.gartner.com/technology/ media-products/newsletters/itko/issue1/ gartner.html

Foreword AJ Alhait

“And I thought this was going to be just another technical book!” Tarun’s new book “And I thought I knew QTP!” is a unique revolution in technical book authoring! This was unlike any technical book I’ve ever read. The approach is so interesting, it makes you want to read on like you are reading a sci-fi novel. It’s quite interesting and a fun read, but do not expect to use it as a technical reference manual. This is one book that you can actually learn something from by reading it start-to-finish. Tarun has, in a way, revolutionized technical book authoring by writing this book… I expect others to ‘get inspired’ and use a similar structure and style in the future. Kudos to Tarun for writing this ‘out of the park’ hit. AJ Alhait Founder SQAForums.com QAtraining.net

Amjad Alihat (AJ), founder and owner of SQAForums.com and QAtraining.net, has over 18 years of experience in software testing, and has been working as a consultant for over 10 years. Started in 1999, SQAForums.com is a hub for various QA professionals and has around 190,000 . As a knowledge-sharing platform it has helped many professionals to increase their expertise. Tarun also started his knowledge sharing through SQAForums, later expanding the same by launching his blog KnowledgeInbox.com and now through his books.

Preface While conducting job interviews recently for my company, I found that many candidates failed to answer simple questions on QTP. I could easily gather that some of them had practical experience but failed to explain the concepts behind it. Whereas some candidates were obviously exaggerating their level of knowledge or expertise in the given field. Until a year back, my first instinct on any public forum was to refrain from answering any interview questions, so as not to promote or encourage standardized answers or discourage independent thought. Even if I did answer, I would first check to see what efforts the person had taken on his/her own to look for the answer. But recently, a mock interview with a teammate started a chain of thought. During the interview, she got nervous and was unable to answer some basic questions, even though her practical knowledge is quite strong. It was then that I realized that people may have practical experience or expertise and still lack conceptual knowledge of QTP. After this incident, I started looking at various forums only to find QTP questions being asked and their responses. The worst part of this exercise was to see so many incorrect answers being offered by novices or inexperienced s. For example, one of the questions, ‘Is it possible to use JavaScript in QTP?’ was answered as, ‘Yes, we can use JavaScript in QTP. But before that, we have to install Java Add-in’. This is only one

of the replies among many that may spread misinformation amongst the beginners. There were other s who replied in of the above answer. Even though I was surprised to find such replies and , I was, at the same time, a little concerned about incorrect knowledge being shared by s like this. Today, experts worldwide refrain from answering such queries with the intent of discouraging standardized answers. But my recent experience made me realize that it is even more important for experts to answer these questions correctly in order to eliminate the ever increasing gap in conceptual knowledge of QTP. With this goal in mind, I decided to write a book on QTP with a fluid storyline and a dialogue-based approach instead of a plain FAQ style format (as it limits the scope of dialogue) that most technical books seem to follow. The result is a book which hopefully makes learning basic-to-really-complex QTP concepts interesting and entertaining. It is my hope that I have achieved (atleast to some extent) what I had set out to do when I started writing this book; that is eliminate misinformation and doubts in the minds of QTP practitioners.

Target Audience Manual Testers, Analysts, and/or Managers who want to switch to Automation or QTP s with any level of expertise should benefit from this book. The book touches on various concepts of QTP and attempts to provide information that is missing in theoretical and practical domains of QTP. Attempt has been made to explain concepts in a simple way without sounding too simplistic.

All characters/names appearing in this work are purely fictitious. Any resemblance to real person(s)/company/names/material/product is purely coincidental.

December 2010

˜™

M

y flight landed at the Pune airport around 11:00 a.m. One thing I always loved about the QueenFisher flights was their on-time performance. I was tired and eager to pick my luggage and rush back home but a technical glitch at belt #2 delayed that by almost half an hour. I had gotten used to long waits by then. After waiting for 40 odd minutes I finally spotted my bag. I picked up the bag and took a pre-paid cab home. Strangely it was raining heavily and there was a high probability of getting stuck in a traffic jam. Luckily the situation was not as bad as I had expected and I reached home around 1.30 p.m. I had planned earlier to go to work for the remainder of the day but after the exhausting flight and subsequent waiting, I changed my plan and decided to take the 2nd consecutive day off. I dozed off for few hours and was in deep sleep when I suddenly woke up with a very strange feeling. I couldn’t feeling this anxious and nervous in my life. I started biting my nails for the first time in my life wondering what would happen next. I knew I couldn’t have done anything differently. I tried convincing myself not to think too much about it and somehow ed the day. The next day was Friday, a day when the office takes on a more cheerful look as we are allowed to dress in casuals. I reached my desk and opened Outlook to check my emails. When I checked my inbox, it felt like I had been away for ages although I had been on leave for two days only. Two Hundred and Twenty Six unread emails and by the time I finished reading them all I realized two hundred of them were just forwards or mails that weren’t of any interest to me. I thought to myself, ‘what a waste of time’ but then 1

And I thought I knew QTP!

suddenly lightning struck me. I realized I was on bench and I would need such things to kill time. It felt really strange to be on bench after seven years of working on tight delivery schedules. I won’t say it felt great as I always preferred to work but I knew I won’t mind this break for a few days. It was time to catch up with my friends and on the lunch table they had only one question, ‘Where were you for the past two days?’ I somehow managed to change the topic and avoid answering their queries. They knew I was up to something but they had no idea what. I spent the rest of the day reading some articles that I had saved on my desktop. Some of the articles were so engrossing that hours ed by before I realized that it was almost time to go home. On reaching home I decided to watch my favourite movie on DVD — ‘The Matrix’. I just loved the concept of the movie. The most interesting question the movie raised was regarding our interpretation of reality. I was already halfway through the movie but at my back of my mind all the events from the past week were being replayed. There was this one thing that I knew might change the whole game and I was afraid that I might have got it all wrong. But I knew there was nothing I could do now as it was a thing of the past. If it was just one person’s decision then I knew it would have been in my favour but there were many people involved in this. My roommate had left for his home town and would be away for two weeks. I knew it would be tough to get the weekend through on my own, so I decided to call up few of my friends and go for a movie. All of us met at FSquare and enquired about the current shows. To our disappointment all movie shows were running full. I wondered if all the people in the city had decided to watch a movie on that day.

2

Tarun

December 2010

Suddenly we noticed a guy giving away free tickets for the ‘Feel N Freaky’ movie. I knew the movie was pathetic but then we had no other options as well. We asked the guy about the offer and he told us that if we had a KodaFone cell connection we can get two tickets free. Three of us had that cellular service provider and I thought it was our lucky day. Alas, it was not to be. He just had the last two free tickets to offer. Since we had no use for just two tickets, we decided to try our luck at another movie theatre nearby. My friend asked me, ‘What about these tickets?’ to which I replied, ‘Nothing, let’s just throw them.’

Lalwani

3

And I thought I knew QTP!

While crossing the road on the way to the car parking, I saw two girls approaching from the other side. On seeing them, I got an idea. I walked up to them and said: Me: Hey, do you want to watch ‘Feel N Freaky?’ (She looked at me with those unsure eyes wondering if it was she I was talking to or someone behind her.)

Girl: Yes, but.. Me: Okay, I have two tickets for the movie if you want. And without even waiting for her reply I handed her the two tickets. Girl: How much? Me: It’s free. Enjoy the movie. Girl: No, I would like to pay. And she took out some money. Me: Don’t worry, it’s free; I can’t watch it. (I knew that after watching the movie she would be cursing me.:D)

I crossed the road and my friend had already brought the car outside the parking lot. Finally, we went to another theatre and this one had tickets available. We knew we could watch the movie of our choice and we all agreed upon watching ‘Inception’. The show was scheduled to start at 6:30 p.m. and it was 5:15 p.m. then. So we decided to head to FarBucks coffee shop and chitchat over a hot cuppa. Relaxed and sipping my vanilla latte, the events of the preceding days came back to my mind again. But suddenly Raju interrupted me and I snapped back to the present. The movie started at 6:30. To say I was awed would be an understatement. I had never seen any movie in my life that had a concept as great as this. Stepping into someone’s dream and stealing thoughts. I really ired the storywriter’s imagination and grasp on the topic of dreams. It was just truly incredible and made me realize how little we 4

Tarun

December 2010

know about what goes on inside our brain when we sleep. But honestly I was not interested in knowing about it as well; I prefer deep sleep where I don’t know what is happening ☺. After the movie we all went for dinner at InLand China. It was my first visit to this restaurant and I was having Chinese cuisine after a long time. I thoroughly enjoyed the food and felt happy.

I woke up around noon on Sunday and had a lazy brunch. After reading the papers, I got busy with getting the house cleaned. Monday arrived and I started the day with high hopes. I was waiting for that one email. Lalwani

5

And I thought I knew QTP!

Since my ‘WhyMail’ was blocked in the company, I had set a forwarder to my office email id. The whole day, the only thing I did was to hit the F9 button on my keyboard and scan every new email. But the one I was waiting for never came. This continued for the next 3 days and I had the sinking feeling that I had lost it. I felt very disappointed and dejected too, but I knew this is not the end of the world. I recollected the statement that I had quoted to Andrew. ‘Success or failure is a part and parcel of life. You learn from failures and move on to new challenges with even stronger determination.’ Days ed and it was Friday again. I had settled back into to my normal routine. It was around 11:00 a.m. when I got a call from a Delhi number. My eyes lit up as I wondered if this was the call I had been waiting for. Me: Hello Caller: Hello Sir, I am calling from ISEEI bank. Would you like to apply for a home loan?

6

Tarun

December 2010

Me: (I nearly lost it! It felt like destiny was playing games with me. I wanted to disconnect the call immediately but I knew she was just doing her job.)

Yes madam, are you giving any free Home also along with that loan? Caller: No sir, we can just give the home loan. Me: But what will I do with the home loan without a home to apply it for? Caller: Sir, that you will have to find on your own or else we can send our consultants to assist you. Me: Hmmm, ok how much loan can I get? Caller: Sir, can you please tell me where you work and what is your monthly income? Me: I have a small tea shop in CannotPlace, Delhi and it does well but I can’t disclose my income. (By now she knew what I was doing and she just hung up on me.)

After the call ended, I again went back to reviewing all the events of the past few weeks and replaying in my mind the sequence of events that had started on a regular Monday two weeks ago.

Lalwani

7

Two Weeks Ago

Personal Interview–Round 1

Andrew: What is the difference between run-time object properties and Test Object properties? Me: Test Object or rather Native object properties are the properties which are used for identifying an object. They are the properties used in OR or DP. Run-time properties are the actual properties which the identified object poses. Caller: Can you give me an example of this? Me: Consider we identify a link with text as .*. Now “.*” here represents the Test Object property and if we use GetROProperty to get the text of the link it may come as ‘ Nurat’ which is the actual text of the link. This is run-time property. Caller: But when we select the ‘Run-time Object’ option in the Object Spy, it shows various properties which GetROProperty actually doesn’t . Why? Me: It is a confusion that was created by QTP 9.5 and lower versions. In QTP 10 HP realized this and renamed the option as Native instead of Run-time. Native properties are those properties which are internally ed by underlying technology of the AUT. Andrew: How do we access the Native object properties? Me: We need to use .Object property of the QTP Test Object and then we can use any of the methods and properties ed by the object. In case of web objects few of the native properties can also be read using the GetROProperty method with ‘attribute/ ‘ format Andrew: How do we change the value of a Run-time object property? Can we use SetTOProperty for the same? Me: No, we cannot directly change any of the Test Object properties. SetTOProperty is used to change the value of property used for object identification. To change a Run-time Object property, we need to use the methods ed by QTP to change them. E.g. to change ‘value’ property of a WebEdit we need to use the Set method which internally updates the same. Lalwani

81

And I thought I knew QTP!

Andrew: Any other way of changing these Run-time object properties? Me: Yes, we can use the underlying native object properties. However, this option is not ed by all Add-ins. Andrew: I have recorded a script in Firefox and I replay it on Internet Explorer. Will it work? Me: Recording of scripts in Firefox can only be done in QTP 11. But this feature is not available in QTP 10 or lower, so the script needs to be record in IE in such cases. As far as the compatibility of the recorded code depends on few things: •  The Firefox version being used should be ed by the QTP version •  If there are IE dialogs that got recorded like window, security alert, certificate errors etc. then, these would error out in Firefox as it uses totally different dialogs •  If we have accessed HTML DOM of the objects in our script then it won’t work in Firefox. However, because we have recorded the script, this won’t happen in our case. •  Then there are few occasional issues as well where the code that is supposed to work the same way in Firefox as well doesn’t work. The ones that I have noticed is usually with ChildObjects where the description used returns the correct object count in IE returns 0 elements in FF. Andrew: Why does QTP not DOM objects in Firefox? Me: (Because I don’t work for HP J....) QTP 11 now does DOM on Firefox as well. But the DOM of Firefox is a bit different from the the IE DOM. Andrew: How do you check if a page has completely loaded in Firefox? 82

Tarun

Personal Interview–Round 1

Me: I will just use ‘Browser.Sync’ Andrew: Which browsers are ed by QTP? Me: QTP s IE, Firefox and Netscape. (I Hope he is not going to ask why Opera is not ed...)

Andrew: I start recording on IE and instead of recording on IE window as a Browser object, it records it as a Window object. What could be the possible reasons you can think of that could be causing this issue? Me: Well there can be few possible reasons I am aware of •  The web Add-in may not be loaded •  The browser version may not be ed by QTP •  Third party browser extensions might be disabled in IE settings •  QTP’s BHOManager add-on may be disabled in IE •  QTP’s installation might be corrupt •  QTP is launched after the target browser object (mmm...I am missing few points may be...)

These are the key issues I can . Just one more thing to add to here is the UAC settings on Windows Vista. If UAC is enabled then it can also cause issues with IE. Andrew: You are given a script which executes unusually slow. What are the possible reasons you can think of which could be making the script perform slow?

Lalwani

83

And I thought I knew QTP!

Me: Well there could be many reasons behind this •  There might be too many unwanted wait statements with high timeouts. •  If Smart Identification is enabled and it gets used, that can also slow down the script. •  Checking objects with same timeout on the same page. E.g. Consider a screen with 5 objects and I use a timeout of 20 seconds on each. Due to a server error, the screen does not load correctly and the very first object my Exist statement checks that it is not found. This behaviour will cause my script to wait for 100 seconds. Since we are giving 20 sec for wait in initial object we are assuming that the screen should appear in 20 seconds. Therefore, for the other 4 objects, we can assume that the screen is already loaded and we can change the timeout to 0 seconds from 20 seconds. •  If the ChildObjects method has been used several times in our test to match a small number of objects in a very heavy HTML/JavaScript page, we may experience delays in execution time. •  By default, QTP uses the object synchronization timeout which is defaulted to 20 seconds. It also uses a WebTimeout which is defaulted to 60 seconds. We can lower these settings according to our application’s needs and optimize the wait times. •  Loops are not exited from, once the condition has been met. For example: consider you are checking attributes of a List object in a Web application. Now, you would like to only check for the tagName property. Once the tagName property is found from the attributes collection, the loop continues instead of being exited causing QTP to use extra time to complete the entire loop. In short, always Exit loops once conditions are met. These are all the points I can think of as of now. Andrew: Any other thing related to QTP’s settings? Me: (Did I miss anything??....In file settings I have Object Timeout, WebTimeout, Smart Identification. So that is already covered. In tools->options I have run mode...May be he is looking for Run Mode...) 84

Tarun

Personal Interview–Round 1

Yes, I missed QTP’s Run Mode setting. If it is set to Normal mode with some per step delay then the script takes more time. In the Fast mode, the script executes without these delays, but the execution marker is not shown. Andrew: What is the difference between options given in File->Settings... and Tools->Options...? Me: Whatever we change in File->Settings... is saved and associated with the script. If we open the script in another machine these settings would be the same. Tools->Options... settings are or machine specific. These settings are not associated with the script. Andrew: What are synchronization points? Me: Synchronization points help QTP to wait for the application to achieve certain state where next operation can be executed. Without synchronization points QTP may act too fast on the application causing the scripts to fail. For example, in a web application, once we click ‘Add to Cart’, it may take a while before the items are successfully added to the cart. A synchronization point can be added here to counter the delay application experiences before items are added to the cart feature. This ensures a smooth running of the script and QTP does not error out because of an ‘Object Not Found’ error. Andrew: How do you use synchronization in scripts? Me: It all depends on what kind of situation we are in •  If we want to wait for the page to load in a Web application then I will use Browser.Sync •  If we want some property on the web page to change then I would use WaitProperty method •  We can also use object existence or non-existence as a check if that is possible using the Exist method Andrew: What is the difference between ‘Browser.Sync’ and ‘Page.Sync’?

Lalwani

85

And I thought I knew QTP!

Me: QTP doesn’t document any difference between these two Sync methods. But I have experienced that if we use ‘Browser.Sync’ then it is more helpful in application with Frames. But there is no documentation for this. Andrew: What would you prefer? A high performance script which has low wait times but can fail occasionally or a script with more wait times and higher reliability? Me: It is a tough choice to make and we need to make sure there is balance. When I started my career in Automation, I always used less wait times and that meant my scripts completed very fast. Though there used to occasional failures, but the impact wasn’t much as the scripts ran very fast. But when we implemented this approach in big Automation projects with over 1000+ scripts we realized that a small failure of script due to low wait times caused us to spend a lot of hours on result analysis. So, we felt that is important to make scripts more reliable by compromising the speed. And we were able to reduce a lot of Analysis time in later releases. Now I usually prefer scripts to have enough time before failing. Andrew: Have you worked with automation of Office applications like Excel? Me: (Smiling) Yes I have. Andrew: Ok, I have an Excel sheet that is already open. How can I get access to the worksheet object of this Excel? Me: We can use GetObject and the Path of the Excel file. That should give us the access to the WorkBook object: Set xlsWorkbook = GetObject("C:\Test\MyXLS.xls")

Andrew: What if I don’t know the path? Me: Then instead of this I would use the class of the Excel application: Set xlsApp = GetObject(, "Excel.Application")

86

Tarun

And I thought I knew QTP!

Alex: Wouldn’t this throw an error as I have used the variable before defining it? Me: No, VBScript processes all the variable declarations before executing the code. So this would still work fine. However, I believe it is a good practice to declare all variables before they are used Andrew: What will be the output of below script? For i = 10 to 0 Msgbox i Next

Me: The loop won’t run as the For loop always run in increment mode, to make it work we need to change the step value For i = 10 to 0 Step -1 Msgbox i Next

Alex: Consider the below script Option Explicit ReDim arrTest(2) arrTest(0) = "Tarun Lalwani"

Now I have not declared the arrTest variable with a Dim. On which line of code would I get the error? ReDim or arrTest(0)? Me: (Another tricky one it seems!!! A ReDim should declare the variable in first place I feel) It’s a tricky question, I haven’t tried this out. But from my understanding ReDim should declare the variable at first instance and the code shouldn’t produce any error.

154

Tarun

Face to Face Interview–Round 2

Note: ReDim is enough for declaring a variable array, we don’t need additional Dim.

Alex: What is the issue in below script? SystemUtil.Run "c:\Program Files\\Internet Explorer\\iexplore.exe"

Me: There is no issue with the code. Though we don’t need to use a ‘\\’ in the path but even if we do, there won’t be a problem. The problem will come only if we had the path starting as “C:\\”. We can’t use a \\ with the drive. For rest of the path, any number of continuous slashes will be treated as single slash. Alex: Consider the below script: Function Test() X = 2 End Function Call Test Msgbox X

What would be the output? Me: It would give an empty message box as the value is created inside the Function Test and is destroyed when the Function scope ends. Alex: Is it possible to fix this in a way that the value change is reflected?

Lalwani

155

And I thought I knew QTP!

Me: Yes, if we declare the variable in the global scope and change the code like below: Dim X Function Test X = 2 End Function Call Test Msgbox X

Then it would start working. Alex: Is there any other way also? Me: Any other way...The assignment needs to happen in the Global scope, so I guess we can use the ExecuteGlobal method and change the code as below: Function Test ExecuteGlobal "X = 2" End Function Call Test Msgbox X

This should make it work

156

Tarun

One Month Later

Lalwani

295

Acknowledgements I would specially like to thank my family for this book. I took a 3-month sabbatical from my work to complete this book and my family extended every to create a conductive environment and keep distractions at bay. I would also like to thank Anshoo Arora (Founder of RelevantCodes.com) who has kindly extended his as a Technical Editor and Reviewer of this book; Chhanda Burmaan who has contributed as an editor and ironed out the inconsistencies and finetuned the narration and Jophy Joy who made the book more interesting and lively with his humorous illustrations.

Anshoo Arora Anshoo Arora is the founder of RelevantCodes.com — a blog targeted towards HP QuickTest professional. He is continuously researching to find better ways of working with QTP, simplifying automation maintenance, creating flexible test suites and frameworks. Apart from QTP, Anshoo also specializes in Quality Center, LoadRunner, .NET (C#, VB.NET) and Web technologies (HTML, CSS, JavaScript, and PHP). Anshoo can be ed at: RelevantCodes.com/ .

297

And I thought I knew QTP!

Chhanda Burmaan After 10 years of experience in different functional areas across various domains like Publishing Outsourcing, Ebook Production, Banking, Telecom and IT, Chhanda is currently on a sabbatical to enjoy a more relaxed pace of life. In between vacations, she undertakes assignments that interest her and range from editing to sub-titling, scriptwriting and translation. She can be reached at [email protected].

Jophy Joy Jophy works as a UI ( Interface) designer and consultant. He has a great sense of humour matched with good capabilities to present them in visual form. Jophy has worked on the illustrations in this book and tried to capture the essence of the story at various junctures. He can be reached at jtoonz@ gmail.com.

298

Tarun

About the Author

Tarun Lalwani is a Test Automation & Solutions Architect and the author of the first ever book on QTP named “QuickTest Professional Unplugged”. This is his 2nd book. He has worked on various automated testing projects utilising technologies like VBScript, VB6, VB.Net, C#.NET, Excel and Outlook Macros. He founded KnowledgeInbox.com — a blog targeted towards the QuickTest community. He uses the blog to share his custom APIs, products, articles, tips and tricks with his readers pro bono. He is also a regular contributor at AdvancedQTP and SQA forums. Tarun’s work has been showcased on several websites such as: RelevantCodes.com AdvancedQTP.com Tarun was awarded with the ‘Best Award’ by HP for QTP 11 Beta testing. His book “QuickTest Professional Unplugged” was recognized as the Best Automation Book in the 2nd ATI Automation Honors award. Tarun can be reached through any of the below links: KnowledgeInbox.com/-us LinkedIn.com/in/tarunlalwani Lalwani

299

QuickTest Professional Unplugged QuickTest Professional Unplugged (now in its 2nd edition) is the first book written by author Tarun Lalwani and the first ever book on QTP as well. It has already turned out to be a best seller since its publication in 2009. Tarun Lalwani has won the Best Automation Book award in the 2nd ATI Automation Honors for the same. This book is good for those starting out on a career in Testing Automation or even for those with a few years of QTP experience. It is the culmination of 3 years of research and effort in this field. The book gives a pragmatic view of using QTP in various situations. And is recommended for those aspiring to be experts or advanced s of QTP.

Quotes from the Reviewers “I find this to be a very pragmatic, hands-on book for those who want to extend their QTP skills beyond basic expert view programming. This book is written by a QTP master for those who wish to eventually become masters themselves.” – Terry “Tarun Lalwani has single-handedly helped thousands of people to expand their knowledge of QuickTest Professional. Here is a book the automated testing community has been crying out for. This book will help QTP practitioners, from beginners to experts. I have used QTP from V6.0 and during the review I learnt something from every chapter.” – Mark 301

Where can you order this book? In India: Order online at KnowledgeInbox.com/store

US & Rest of the World: QuickTest Professional Unplugged www.lulu.com/commerce/index.php?fBuyContent=11253559

And I thought I knew QTP! www.lulu.com/commerce/index.php?fBuyContent=10689195

For bulk orders & discounts, please email us at [email protected].

Your Counts! We @ KnowledgeInbox take every very seriously. Let us know what you think about this book — what you liked or what you didn’t or simply what you would like to read about in a future book. Your will help us in coming out with books that are relevant and in tune with what our readers want. To send us general , simply send an e-mail to @KnowledgeInbox. com and please mention the book title in the subject line of your message. Alternatively you can leave a online at KnowledgeInbox.com/-us.

302