Tannoy Reveal 402 -manual English.pdf 3u3g1a

English Manual

Reveal 402 / 502 / 802



English manual Important safety instructions

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat s, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

English manual

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Explanation of graphic symbols

The lightning bolt triangle is used to alert the to the presence of uninsulated “dangerous voltages” within the unit’s chassis that may be of sufficient magni-

English manual 1

Important safety instructions



tude to constitute a risk of electric shock to humans. The exclamation point triangle is used to alert the to presence of important operating and service instructions in the literature accompanying the product.

Fuse protection A mains fuse is provided in the IEC power inlet on the back of this apparatus, which can only be removed with the power cord unplugged. This must be replaced by a fuse of the same type and rating (see specifications or refer to rear ).

Warning

Warning: Strong magnetic field

– Voltages in this equipment are hazardous to life. Do not open the unit – risk of electric shock inside. There are no -serviceable parts inside. Refer all servicing to qualified service personnel. – Make sure that the “Voltage Select” switch on the rear is set correctly for your area before connecting the mains plug. – Use only with the detachable power cord supplied with the apparatus, or by your local distributor or dealer. – The MAINS plug is used as the disconnect device and shall remain readily operable. – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. – Do not install this device in a confined space.

Due to the powerful drive unit magnet, do not place within 1 meter (3 foot) of a cathode ray tube (CRT) television or monitor. There is no issue with plasma, LCD and LCD devices.

2

EMC / EMI Electromagnetic compatibility /  Electromagnetic interference This device has undergone safety and EMC testing, and complies with the European Low Voltage Directive 2006 / 95 / EC and Electromagnetic Compatibility Directive 2004 / 108 / EC. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses and can radiate radio frequency enReveal 402 / 502 / 802

Warranty

ergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Tannoy Ltd. for compliance could void the ’s authority to operate the equipment.

Warranty No maintenance of the loudspeaker is necessary. Please your Tannoy product online at www.tannoy.com. All of our products have been produced and tested with care and precision to give first-class service. All ive components are guaranteed for a period of 5 years from the date of purchase from an authorized Tannoy dealer subject to the absence of accident, misuse, neglect, unauthorized modification or fair wear and tear. All active and electronic components are guaranteed for a period of 2 years from the date of purchase from an authorized Tannoy dealer. If at any time during this warranty period the equipment proves to be defective for any reason other than accident, misuse, neglect, unauthorized modification or fair wear and tear, we will repair any such manufacturing defect or, at our option, replace it without charge for labour, parts or return carriage. If you suspect a problem with a Tannoy product, in the first instance, discuss it with your Tannoy dealer.

English manual 3

Introduction

If you require further assistance then we ask that you deal directly with your local Tannoy distributor. If you cannot locate your distributor please Tannoy Customer Services, at the address given below. Tannoy Ltd. UK Customer Services Rosehall Industrial Estate Coatbridge North Lanarkshire ML5 4TF Scotland United Kingdom Telephone: +44 1236 420199 Fax: +44 1236 428230 E-mail: [email protected] Do not ship any product to Tannoy without previous authorization. Our policy commits us to incorporating improvements to our products through continuous research and development. Please confirm current specifications for critical applications with your supplier.

4

Introduction Once you have set up your new loudspeakers as described in this manual, please complete and return the registration document or you product online at www.tannoy.com – this does not limit your legal rights.

Unpacking Check carefully for any sign of transit damage. In the unlikely event of transit damage, notify your shipping company and / or dealer as soon as possible for advice. It is recommended you store all packaging to allow protected transport in future. Ensure that the following accessories are present: – mains cord appropriate to your country of use – one 5 meter 3.5 mm mini-jack cable.

Caution These loudspeakers are capable of generating high sound levels over a sustained period of time. Because of their low levels of distortion, it is not always obvious that the sound level is high when working with these loudspeakers. Please be aware that exposure to excessive levels over a sustained period of time can lead to permanent hearing damage. Reveal 402 / 502 / 802



Positioning your speakers

Positioning your speakers

Connecting your speakers

These loudspeakers are designed as near field monitors, positioned typically 0.75 to 3 meters from the listener. They will typically be placed on the mixer metering bridge or on a table either side of a smaller mixing desk or control surface. They may also be mounted on appropriate loudspeaker stands, which will yield the best results in of stability and vibration. In all cases, these speakers should be angled towards the listener, with the tweeter approximately at ear height. For best uniform dispersion, these speakers should be mounted vertically, and not on their sides.

Always make and check all connections before plugging your loudspeakers into the mains. Make sure that the Voltage Select switch on each speaker’s rear is set to the correct voltage range.

Balanced and unbalanced signal inputs You can feed a line level input signal to your speaker by using either – the unbalanced 6.35 mm (¼”) input jack or – the balanced XLR input jack. XLR pinouts are: 2  =  +ve (hot), 3  =  -ve (cold) and 1  =  screen or signal ground. The XLR input may also be used for unbalanced operation by connecting pins 3 and 1 together.

Aux input – Monitor Link The furthest you lean forward to the furthest you sit back

Positioning your speakers for optimal results

As an alternative to feeding a mono signal into each Tannoy Reveal loudspeaker, you can feed a stereo signal (e.g. from an audio interface, a smart phone or an audio player) to one loudspeaker and link it to a second loudspeaker using the supplied 3.5 mm cable, thereby creating a stereo pair. To do so, proceed as follows: – Connect your line level signal source to the “IN” jack in the AUX section of the first loudspeaker’s

English manual 5

Volume control

rear , using the 3.5  mm mini-jack cable that came with the first speaker. – Connect the “MONITOR LINK” jack of the first loudspeaker to the “MONITOR LINK” jack of the second loudspeaker using the 3.5  mm mini-jack cable that came with the second speaker. – Set the “SPEAKER POSITION” switch of each monitor according to its physical position. – Set the position switch of the left loudspeaker (when facing the fronts) to “-►”. – Set the position switch of the right loudspeaker to“◄-”.

Cabinet care The cabinet may be cleaned with a soft lint free cloth. The use of solvents or abrasive cleaners should be avoided.

Volume control The rear mounted “VOLUME” control knob allows for matching each loudspeaker’s volume to your mixing desk or other equipment. It will also allow you to adjust the relative levels between speakers in a surround system.

EQ The EQ control switch adjusts the tweeter volume. It should normally be set to “NEUTRAL”. If you are working in a bright environment, set the EQ control switch to “HI CUT”. In a dull environment, set the EQ control switch to “HI BOOST”. 6

Reveal 402 / 502 / 802



Technical specifications

Technical specifications Frequency response 1 Maximum SPL 2 Distortion Dispersion (-6 dB) Drive Unit LF  /  Midrange Drive unit HF Magnetic shielding Max. operating temperature Electronic section Inputs Outputs Input sensitivity Crossover frequency Amplifier output power controls Power supply Power consumption Fuse

REVEAL 402 56 Hz to 48 kHz 101 dB < 0.9 % 90° 100 mm (4”) 19 mm (3/4”) soft dome No 35° C

REVEAL 502 49 Hz to 43 kHz 108 dB < 0.7 % 90° 130 mm (5”) Multi fibre paper cones 25 mm (1”) soft dome No 35° C

REVEAL 802 42 Hz to 43 kHz 114 dB < 0.4 % 90° 200 mm (8”) 25 mm (1”) soft dome No 35° C

Balanced XLR: 20 kΩ Unbalanced 6.35 mm (¼”) & 3.5 mm mini-jack: 10 kΩ Monitor Link 0.775 volt RMS for maximum output 2.8 kHz 2.3 kHz 1.8 kHz LF: 25 W RMS, LF: 50 W RMS, LF: 75 W RMS, HF: 25 W RMS HF: 25 W RMS HF: 25 W RMS Power on / off; Volume; High Frequency Equalizer (+1.5 dB Boost, Neutral, -1.5 dB cut), Left / Right Monitor Select 100 to 120 V and 200 to 240 V (switchable), 50 to 60 Hz 96 W maximum 120 W maximum 240 W maximum 100 to 120 V, 100 to 120 V, 100 to 120 V, T800 mAL/ 250 V T1AL/ 250 V T2AL/ 250 V

English manual 7

Technical specifications

REVEAL 402 220 to 250 V, T400 mAL/ 250 V Cabinet Low frequency alignment Cabinet construction Cabinet finish Cabinet dimensions (H x W x D)

REVEAL 502 220 to 240 V, T500 mAL/ 250 V

REVEAL 802 220 to 240 V, T1 AL/ 250 V

Optimized front port MDF cabinet with injection moulded front baffle Black fine texture 240 x 147 x 212 mm 300 x 184 x 238 mm 390 x 254 x 300 mm (9.45 x 5.79 x 8.35”) (11.81 x 7.24 x 9.37”) (15.35 x 10.00 x 11.81”)

Notes 1: +/-3 dB measured at 1 m in an anechoic chamber. 2: Peak SPL at mix position for 1 pair driven. Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserve the right to alter without prior notice. Please the latest specifications with critical applications.

8

Reveal 402 / 502 / 802



Tannoy Reveal 402 / 502 / 802

English manual 9

Tannoy Reveal 402 / 502 / 802

Tannoy Reveal 402 / 502 / 802 English Manual

10

Reveal 402 / 502 / 802