Sac 6l4c35

Training on Subassembly Composer

Prepared By : Nilesh Jagtap

Learning Objectives •

Learn how to create a subassembly from scratch

•

Learn how to add advanced parameters to the assembly

•

Learn how to import into AutoCAD Civil 3D

•

Learn how to apply it to our corridor in AutoCAD Civil 3D

Parametric Cross sections • Roads • Tunnels

• Retaining Walls • Bridges • Concrete Troughs • Railways

What you should know before learning SAC? • Basics of Civil 3D • Dynamic relationship between civil 3d elements • Stock Subassemblies and their properties • Basics of Corridor and Targets • Links and codes, styles • Basics of Flowchart

SAC What is it?

What is SAC ? • Introduced summer 2011 • Complex subassemblies without .net programming • Available Civil 3D 2011 onwards

Programming subassemblies before SAC

Programming subassemblies with SAC

Preview Flowchart

Properties Tool Box

Settings and Parameters

SAC Pros / Cons

Pros • Easy to learn to make own subassemblies • Start with simple SA’s, and make them more complex • More intelligent than stock SA’s • Makes a nice combo with Corridor Solids

Cons • No encryption – like sending out source code • Not very friendly on complex SA’s • No combination with custom .NET code • No Pipe Network targets

Tips for excellence • Sketch it out first • Make a calculation notes

How to Import Custom subassemblies to Civil 3D

• .pkt files • Create new palette • Import .pkt files to new tool palette

Update custom subassemblies • Check out new conditions, parameters, targets • Update the .pkt file • How to update the corridor with updated subassembly without disturbing existing corridor regions, targets etc. – – – – – –

Remove the existing .pkt file from tool pallete Close the civil 3d Delete the .dll file / subassembly folder from ‘Imported tool’ Open civil 3d and import new subassembly Copy .net path of new .pkt Open the propeties of existing subassembly in corridor and go to the .net path and replace it with new copied path. – Rebuild the corridor – This procedure will not work when you add new targets to subassembly.

C:\Documents and Settings\All s\Application Data\Autodesk\C3D 2012\enu\Imported Tools

• Civil 3D Help http://help.autodesk.com/view/CIV3D/2014/ENU/

• Autodesk University • Autodesk Forums • Blogs