Rx-v781 Rx-v681 Manual English 482qw

AV Receiver

Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit.

EN

CONTENTS Introduction

5

4 Connecting a network cable or preparing the wireless antenna .....40 Connecting the network cable.....................................................................................................................40

Accessories................................................................................... 5

Preparing the wireless antenna ...................................................................................................................40

About this book ............................................................................ 5

5 Connecting other devices............................................................41 Connecting an external power amplifier.....................................................................................................41

About remote control .................................................................... 5

Connecting a device compatible with the trigger function ........................................................................41

Batteries (AAA, R03, UM-4) (x2) ...................................................................................................................... 5

6 Connecting the power cable ........................................................42

Operating range of the remote control......................................................................................................... 5

7 Selecting an on-screen menu language ........................................43

6

8 Configuring the necessary speaker settings..................................44

What you can do with the unit ........................................................ 6

Measuring at one listening position (single measure) ................................................................................47

Part names and functions .............................................................. 8

Measuring at multiple listening positions (multi measure) (RX-V781 only)...............................................48

FEATURES

9 Optimizing the speaker settings automatically (YPAO) ..................45

Checking the measurement results .............................................................................................................50

Front (RX-V781) .................................................................................................................................... 8

Reloading the previous YPAO adjustments.................................................................................................50

Front (RX-V681) .................................................................................................................................. 10

Error messages .............................................................................................................................................51

Front display (indicators) ............................................................................................................................ 12

Warning messages ........................................................................................................................................52

Rear (RX-V781).................................................................................................................................... 13 Rear (RX-V681).................................................................................................................................... 15

10 Connecting to a network device wirelessly .................................53

Remote control ............................................................................................................................................ 17

Selecting the connection method ...............................................................................................................53 Connecting the unit to a wireless network..................................................................................................54

PREPARATIONS

Connecting a mobile device to the unit directly (Wireless Direct) .............................................................59

18

11 Connecting to the MusicCast network ........................................61 MusicCast CONTROLLER ..............................................................................................................................61

General setup procedure ..............................................................18

Adding the unit to the MusicCast network ..................................................................................................61

1 Connecting speakers ..................................................................19 Basic speaker configuration ........................................................................................................................ 20

PLAYBACK

Advanced speaker configuration ................................................................................................................ 27

2 Connecting a TV and playback devices .........................................32

62

Basic playback procedure .............................................................62

Input/output jacks and cables .................................................................................................................... 32

Selecting an HDMI output jack.....................................................................................................................62

Connecting a TV ........................................................................................................................................... 33

Connecting audio devices (such as CD players) ......................................................................................... 38

Selecting the input source and favorite settings with one touch (SCENE) ......................................................................................63

Connecting to the jacks on the front ................................................................................................ 38

ing a scene .......................................................................................................................................63

Connecting video devices (such as BD/DVD players) ................................................................................. 35

3 Connecting the FM/AM antennas..................................................39 En

2

Selecting the sound mode.............................................................64

Viewing the current status............................................................96

Enjoying stereoscopic sound fields (CINEMA DSP 3D) ............................................................................... 65

Switching information on the front display ................................................................................................96

Enjoying unprocessed playback.................................................................................................................. 68

Viewing the status information on the TV ...................................................................................................96

Enjoying pure high fidelity sound (Pure Direct).......................................................................................... 69

Configuring playback settings for different playback sources (Option menu).............................................................................97

Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer) .................................................................................................................... 69

Option menu items.......................................................................................................................................97

Listening to FM/AM radio ..............................................................70 Setting the frequency steps......................................................................................................................... 70

CONFIGURATIONS

Selecting a frequency for reception ............................................................................................................ 70

101

ing favorite radio stations (presets) .............................................................................................. 71

Configuring input sources (Input menu)....................................... 101

Radio Data System tuning ........................................................................................................................... 72 Operating the radio on the TV ..................................................................................................................... 73

Input menu items .......................................................................................................................................101

Playing back music via Bluetooth ..................................................74

Configuring the SCENE function (Scene menu) ............................. 103

Playing back Bluetooth device music on the unit ...................................................................................... 74

Scene menu items ......................................................................................................................................104

Enjoying audio using Bluetooth speakers/headphones ............................................................................ 75

Playing back music stored on a USB storage device.........................76

Configuring sound programs/surround decoders (DSP Program menu) ................................................................. 105

Connecting a USB storage device ............................................................................................................... 76

DSP Program menu items ..........................................................................................................................106

Playback of USB storage device contents .................................................................................................. 76

Configuring various functions (Setup menu) ................................ 108

Playing back music stored on media servers (PCs/NAS) ...................79

Setup menu items.......................................................................................................................................109

Media sharing setup..................................................................................................................................... 79

Speaker (Manual Setup) .............................................................................................................................111

Playback of PC music contents ................................................................................................................... 80

Sound ..........................................................................................................................................................114

Listening to Internet radio ............................................................83

Video............................................................................................................................................................116

Playback of Internet radio ........................................................................................................................... 83

HDMI ............................................................................................................................................................117

ing favorite Internet radio stations (bookmarks) ......................................................................... 85

Network.......................................................................................................................................................119

Playing back iTunes/iPod music with AirPlay..................................86

Bluetooth ....................................................................................................................................................121 Multi Zone ...................................................................................................................................................122

Playback of iTunes/iPod music contents.................................................................................................... 86

Function ......................................................................................................................................................123

Playing back music in multiple rooms (multi-zone) .........................88

ECO ..............................................................................................................................................................125

Preparing Zone2........................................................................................................................................... 88

Language.....................................................................................................................................................126

Controlling Zone2 ........................................................................................................................................ 90

Viewing information about the unit (Information menu) ............... 126

ing favorite items (shortcut) .............................................92

Types of information ..................................................................................................................................127

ing an item ...................................................................................................................................... 92

Configuring the system settings (ADVANCED SETUP menu)............ 128

Recalling a ed item .......................................................................................................................... 92

ADVANCED SETUP menu items ..................................................................................................................129

Controlling the unit from a web browser (web control) ...................93

Changing the speaker impedance setting (SP IMP.) .................................................................................129

Top menu screen.......................................................................................................................................... 94

Selecting the remote control ID (REMOTE ID) ...........................................................................................129

Control screen .............................................................................................................................................. 94

Changing the FM/AM tuning frequency setting (TU).................................................................................129

Settings screen............................................................................................................................................. 95

Switching the video signal type (TV FORMAT)...........................................................................................130

En

3

Removing the limitation on HDMI video output (MON.CHK) ................................................................... 130 Selecting the HDMI 4K signal format (4K MODE) ...................................................................................... 130 Restoring the default settings (INIT) ......................................................................................................... 130 Updating the firmware (UPDATE).............................................................................................................. 131 Checking the firmware version (VERSION) ............................................................................................... 131

Updating the unit’s firmware via the network .............................. 132

APPENDIX

133

Frequently asked questions ........................................................ 133 Troubleshooting ........................................................................ 134 First, check the following:.......................................................................................................................... 134 Power, system and remote control........................................................................................................... 134 Audio........................................................................................................................................................... 135 Video ........................................................................................................................................................... 137 FM/AM radio................................................................................................................................................ 138 Bluetooth.................................................................................................................................................... 139 USB and network ....................................................................................................................................... 139

Error indications on the front display .......................................... 141 Glossary .................................................................................... 142 Audio information (audio decoding format) ............................................................................................ 142 Audio information (others) ........................................................................................................................ 143 HDMI and video information ..................................................................................................................... 144 Network information ................................................................................................................................. 144 Yamaha technologies................................................................................................................................. 144

ed devices and file formats ............................................. 145 ed devices ..................................................................................................................................... 145 File formats................................................................................................................................................. 145

Video signal flow........................................................................ 146 Video conversion table .............................................................................................................................. 146

Information on HDMI .................................................................. 147 HDMI Control .............................................................................................................................................. 147 Audio Return Channel (ARC)...................................................................................................................... 148 HDMI signal compatibility.......................................................................................................................... 149

Trademarks............................................................................... 150 Specifications ............................................................................ 151 En

4

Introduction Accessories Check that the following accessories are

About remote control ☐ YPAO microphone

This section explains how to use the supplied remote control.

supplied with the product.

☐ AM antenna

Batteries Insert the batteries the right way round.

☐ Remote control ☐ FM antenna

☐ Batteries (AAA, R03, UM-4) (x2) ☐ CD-ROM (Owner’s Manual) ☐ Easy Setup Guide ☐ Safety Brochure

Operating range of the remote control

* One of the above is supplied depending on the region of purchase.

X Point the remote control at the remote control sensor on the unit and remain within the operating range shown below.

About this book

(RX-V781)

(RX-V681)

• The illustrations of the main unit used in this manual are of the RX-V781 (U.S.A. model), unless otherwise specified. • In this manual, illustrations of English menu screens are used as examples.

Within 6 m (20 ft)

• Some features are not available in certain regions. 30°

• Due to product improvements, specifications and appearance are subject to change without notice. • This manual explains operations using the supplied remote control. Icons used in this manual

Y indicates precautions for use of the unit and its feature limitations.

X indicates supplementary explanations for better use. En

5

30°

30°

30°

FEATURES What you can do with the unit The unit is equipped with the various useful features.

Various wireless connection methods (p.53)

Creating 3-dimensional sound fields (p.65)

Connecting various devices (p.32) The unit s the Wi-Fi feature that allows the unit to

Connecting presence speakers allows you to create a natural

A number of HDMI jacks and various input/output jacks on

connect to your wireless router (access point) without a

3-dimensional sound field in your own room (CINEMA DSP

the unit allow you to connect video devices (such as BD/DVD

network cable connection. In addition, Wireless Direct

3D). Even when no presence speakers are connected, the

players), audio devices (such as CD players), game consoles,

enables connecting a mobile device to the unit directly

Virtual Presence Speaker (VPS) function produces 3D

camcorders, and other devices.

without router.

surround sound. In addition, the unit creates Virtual Surround Back Speaker (VSBS) using the surround speakers to add a sense of depth to the rear sound field even when no

Playing back TV audio in surround sound with a single HDMI cable connection (Audio Return Channel: ARC) (p.33)

surround back speakers are connected.

Wi-Fi or Wireless Direct

When using an ARC-compatible TV, you only need one HDMI cable to enable video output to the TV, audio input from the TV, and the transmission of HDMI Control signals. HDMI Control TV audio VSBS Video from external device

En

6

Surround playback with 5 speakers placed in front (p.67) If you have surround speakers but there is no space to place

Useful applications The following applications provide you the flexibility to control the unit or assist you with the cable connections.

⬛ AV CONTROLLER

⬛ AV SETUP GUIDE (for tablet)

“AV CONTROLLER” will turn your smartphone/tablet into a

“AV SETUP GUIDE” is an application that assists you with

Wi-Fi enabled remote control for your Yamaha network

cable connections between AV receiver and source devices

The unit s the MusicCast feature that allows you to

products. This application provides you the flexibility to

as well as AV receiver setup. This application guides you

link a MusicCast compatible device to another device in a

control the available inputs, volume, mute, power

through the various settings such as speaker connections,

different room and play them back simultaneously, or

commands and playback source.

TV and video/audio device connections and selecting the

them in the rear of your room, you can place them in the front and enjoy multichannel surround sound with the 5 speakers placed in the front (Virtual CINEMA FRONT).

Home Audio Network with MusicCast (p.61)

speaker system.

control all MusicCast compatible devices with the dedicated application “MusicCast CONTROLLER”.

Functions • Power on/off and volume adjustment

Functions

Low power consumption (p.125)

• Input, scene and sound mode selection

• Connection guide (speakers, TV and video/audio devices)

• DSP Parameter adjustment

• Setup guide (YPAO settings and various setup assistance

The ECO mode (power saving function) reduces the unit’s

• Playback control (including music selection for some

power consumption.

with illustrations) • Viewing owner’s manual

sources)

X

X

For details, search for “AV CONTROLLER” on the App Store or Google

For details, search for “AV SETUP GUIDE” on the App Store or Google

Play.

Play.

En

7

Part names and functions This section explains the functions of the parts of the unit.

Front (RX-V781) a

b

c

d

e

f

g

h

i

j

k

MAIN ZONE

l

PURE DIRECT

ZONE 2

ZONE CONTROL

INFO (WPS)

MEMORY

PRESET

FM

AM

TUNING

INPUT

VOLUME SCENE

BD DVD

PHONES

YPAO MIC

TV

TONE CONTROL

NET

PROGRAM

SILENT CINEMA

m

n

RADIO

STRAIGHT

(CONNECT)

o

p

q

r

En

8

s

VIDEO AUX

HDMI IN

t

USB

5V

1A

u

v

a MAIN ZONE z key

q SCENE keys

Turns on/off (standby) the unit.

Select the ed input source, sound program, and various settings with one touch. Also, turns on the unit when it is in standby mode (p.63).

b Standby indicator

r PROGRAM keys

Lights up when the unit is in standby mode under any of the following conditions.

Select a sound program or a surround decoder (p.64).

• HDMI Control is enabled (p.117)

s STRAIGHT (CONNECT) key

• Standby Through is enabled (p.118) • Network Standby is enabled (p.119)

Enables/disables the straight decode mode (p.68).

c ZONE 2 key

Enters MusicCast CONTROLLER registration by holding down for 5 seconds (p.61).

t VIDEO AUX (HDMI IN) jack

Enables/disables the audio output to Zone2 (p.90).

d ZONE CONTROL key

For connecting a device, such as a camcorder and a game console (p.38).

u USB jack

Changes the zone (main zone or the Zone2) that is controlled by the keys and knobs on the front (p.90).

For connecting a USB storage device (p.76).

e INFO (WPS) key

v VOLUME knob

Selects the information displayed on the front display (p.96).

Adjusts the volume.

Enters the wireless network connection setup (WPS push button configuration) by holding down for 3 seconds (p.55).

f MEMORY key s FM/AM radio stations as preset stations (p.71).

g PRESET keys Select a preset FM/AM radio station (p.71).

h FM and AM keys Switch between FM and AM (p.70).

i Front display Displays information (p.12).

j Remote control sensor Receives remote control signals (p.5).

k TUNING keys Select the radio frequency (p.70).

l PURE DIRECT key Enables/disables Pure Direct (p.69).

m INPUT knob Selects an input source.

n PHONES jack For connecting headphones.

o YPAO MIC jack For connecting the supplied YPAO microphone (p.45).

p TONE CONTROL key Adjusts the high-frequency range and low-frequency range of output sounds (p.98).

En

9

Front (RX-V681) a

b

MAIN ZONE

c

d

e f

g

h

i

j

k

l

m

YPAO MIC

PURE DIRECT

ZONE 2

ZONE CONTROL

INFO (WPS)

MEMORY

PRESET

FM

AM

TUNING

VOLUME SCENE

BD DVD

PHONES

INPUT

TV

TONE CONTROL

NET

PROGRAM

STRAIGHT

(CONNECT)

SILENT CINEMA

n

RADIO

o

p

q

r

En

10

s

VIDEO AUX

HDMI IN

t

USB

5V

1A

u

v

a MAIN ZONE z key

q SCENE keys


Select the ed input source, sound program, and various settings with one touch. Also, turns on the unit when it is in standby mode (p.63).

b Standby indicator

r PROGRAM keys

Lights up when the unit is in standby mode under any of the following conditions.

Select a sound program or a surround decoder (p.64).

• HDMI Control is enabled (p.117)

s STRAIGHT (CONNECT) key

• Standby Through is enabled (p.118) • Network Standby is enabled (p.119)

Enables/disables the straight decode mode (p.68).

c YPAO MIC jack

Enters MusicCast CONTROLLER registration by holding down for 5 seconds (p.61).

t VIDEO AUX (HDMI IN) jack

For connecting the supplied YPAO microphone (p.45).

d ZONE 2 key

For connecting a device, such as a camcorder and a game console (p.38).

u USB jack

Enables/disables the audio output to Zone2 (p.90).

e Remote control sensor

For connecting a USB storage device (p.76).

v VOLUME knob

Receives remote control signals (p.5).

f ZONE CONTROL key

Adjusts the volume.

Changes the zone (main zone or the Zone2) that is controlled by the keys and knobs on the front (p.90).

g INFO (WPS) key Selects the information displayed on the front display (p.96). Enters the wireless network connection setup (WPS push button configuration) by holding down for 3 seconds (p.55).

h MEMORY key s FM/AM radio stations as preset stations (p.71).

i PRESET keys Select a preset FM/AM radio station (p.71).

j FM and AM keys Switch between FM and AM (p.70).

k Front display Displays information (p.12).

l TUNING keys Select the radio frequency (p.70).

m PURE DIRECT key Enables/disables Pure Direct (p.69).

n PHONES jack For connecting headphones.

o INPUT keys Select an input source.

p TONE CONTROL key Adjusts the high-frequency range and low-frequency range of output sounds (p.98).

En

11

Front display (indicators) a

b

c

d

e

fgh

ENHANCER STEREO TUNED OUT 1

2

ij k

l

m

PARTY SLEEP MUTE ZONE 2 VOL. ADAPTIVE DRC VIRTUAL

FPL L C R FPR SL SW SR SBL SB SBR

n a ECO Lights up when the unit is in the eco mode (p.125).

b HDMI Lights up when HDMI signals are being input or output.

OUT1/OUT2 (RX-V781 only) Indicates the HDMI OUT jacks currently outputting an HDMI signal.

OUT (RX-V681 only) Lights up when HDMI signals are being output.

c ENHANCER Lights up when Compressed Music Enhancer (p.69) is working.

d CINEMA DSP Lights up when CINEMA DSP or CINEMA DSP 3D (p.65) is working.

e STEREO Lights up when the unit is receiving a stereo FM radio signal.

TUNED Lights up when the unit is receiving an FM/AM radio station signal.

f Signal strength indicator

o

n p

j ZONE2

q

q Speaker indicators

Lights up when audio output to Zone2 is enabled (p.90).

Indicate speaker terminals from which signals are output. A Front speaker (L)

k MUTE Blinks when audio is temporarily muted.

S Front speaker (R) D Center speaker

l Volume indicator Indicates the current volume.

F Surround speaker (L) G Surround speaker (R)

m VIRTUAL Lights up when the Virtual Presence Speaker (VPS) or Virtual Surround Back Speaker (VSBS) (p.65), or the virtual surround processing (p.67) is working.

n Cursor indicators

H Surround back speaker (L) J Surround back speaker (R) K Surround back speaker B Presence speaker (L)

Indicate the remote control cursor keys currently operational.

o Information display

L Subwoofer

Displays the current status (such as input name and sound mode name). You can switch the information by pressing INFO (p.96).

p ADAPTIVE DRC Lights up when Adaptive DRC (p.98) is working.

Indicates the strength of the wireless network signal (p.53).

g Bluetooth indicator Lights up when the unit is connecting to a Bluetooth device (p.74).

h PARTY Lights up when the unit is in the party mode (p.91).

i SLEEP Lights up when the sleep timer is on.

En

N Presence speaker (R)

12

Rear (RX-V781) a

b

c

d

e

g

f

i

h

TRIGGER OUT 12V 0.1A WIRELESS

HDMI OUT

HDMI 1

HDMI 2

HDMI 3

HD2.2

HD2.2

HD2.2

HDMI 4

NETWORK

HDMI 5

(NET)

HD2.2

IN 2

1

(BD/DVD)

ARC

OUT

REMOTE

OPTICAL

EXTRA SP1 F.PRESENCE/ZONE2

ANTENNA

VIDEO

(RADIO)

FM

(TV) AV4

AM

COAXIAL AV3 Y

PR

PB

Y

PB

PR

SPEAKERS

COMPONENT VIDEO AV2

CLASS 2 WIRING CABLAGE CLASSE 2 SURROUND

MONITOR OUT

OPTICAL

CENTER

FRONT

EXTRA SP2 SURROUND BACK

VIDEO AV 1

VIDEO

COMPONENT VIDEO

SINGLE

SINGLE

1

GND

2

PHONO

k

AUDIO 1

AUDIO 2

ZONE 2

AV 5

l

AV 6

m

SUR. BACK

SURROUND

ZONE OUT

n

o

CENTER PRE OUT

FRONT

ZONE2/BI-AMP

SUBWOOFER

p

* The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections.

En

13

j

a REMOTE IN/OUT jacks For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other devices from another room (p.89).

b TRIGGER OUT jack For connecting to a device that s the trigger function (p.41).

c HDMI OUT 1-2 jacks For connecting to HDMI-compatible TVs and outputting video/audio signals (p.33). When using ARC, TV audio signal can also be input through the HDMI OUT 1 jack.

d ANTENNA jacks For connecting to FM and AM antennas (p.39).

e HDMI 1-5 jacks For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.35).

f Wireless antenna For connecting to a network device wirelessly (p.53).

g NETWORK jack For connecting to a network with a network cable (p.40).

h SPEAKERS terminals For connecting to speakers (p.19).

i VOLTAGE SELECTOR (Taiwan, Brazil and General models only) Selects the switch position according to your local voltage (p.42).

j Power cable For connecting to an AC wall outlet (p.42).

k PHONO jacks For connecting to a turntable (p.38).

l AUDIO 1-2 jacks For connecting to audio playback devices and inputting audio signals (p.38).

m AV 1-6 jacks For connecting to video/audio playback devices and inputting video/audio signals (p.35).

n ZONE2 OUT jacks For connecting to the external amplifier used in Zone2 and for outputting audio (p.88).

o MONITOR OUT jacks COMPONENT VIDEO jacks For connecting to a TV that s component video and outputting video signals (p.34).

VIDEO jack For connecting to a TV that s composite video and outputting video signals (p.34).

p PRE OUT jacks For connecting to a subwoofer with built-in amplifier or to an external power amplifier (p.41).

En

14

Rear (RX-V681) a

b

c

d

e

f

g

i

h

TRIGGER OUT 12V 0.1A WIRELESS

HDMI OUT

HDMI 1

HDMI 2

HDMI 3

HD2.2

HD2.2

HD2.2

HDMI 4

NETWORK

HDMI 5

(NET)

HD2.2

IN

(BD/DVD)

ARC

OUT

EXTRA SP1

REMOTE

OPTICAL

ANTENNA

VIDEO

F.PRESENCE/ZONE2

(RADIO)

FM

(TV) AV4

AM

COAXIAL AV3 Y

PR

PB

Y

PB

PR

SPEAKERS

COMPONENT VIDEO AV2


MONITOR OUT

OPTICAL

CENTER

FRONT


VIDEO AV 1

VIDEO

COMPONENT VIDEO

SINGLE

1 GND

2

PHONO

k

AUDIO 1

AUDIO 2

ZONE 2

AV 5

l

AV 6

m

n

ZONE2/BI-AMP

SUBWOOFER PRE OUT

ZONE OUT

o

p

* The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections.

En

15

j

a REMOTE IN/OUT jacks For connecting to an infrared signal receiver/emitter that allows you to operate the unit and other devices from another room (p.89).

b TRIGGER OUT jack For connecting to a device that s the trigger function (p.41).

c HDMI OUT jack For connecting to an HDMI-compatible TV and outputting video/audio signals (p.33). When using ARC, TV audio signal can also be input through the HDMI OUT jack.

d ANTENNA jacks For connecting to FM and AM antennas (p.39).

e HDMI 1-5 jacks For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.35).

f Wireless antenna For connecting to a network device wirelessly (p.53).

g NETWORK jack For connecting to a network with a network cable (p.40).

h SPEAKERS terminals For connecting to speakers (p.19).

i VOLTAGE SELECTOR (Taiwan, Brazil and General models only) Selects the switch position according to your local voltage (p.42).

j Power cable For connecting to an AC wall outlet (p.42).

k PHONO jacks For connecting to a turntable (p.38).

l AUDIO 1-2 jacks For connecting to audio playback devices and inputting audio signals (p.38).

m AV 1-6 jacks For connecting to video/audio playback devices and inputting video/audio signals (p.35).

n ZONE2 OUT jacks For connecting to the external amplifier used in Zone2 and for outputting audio (p.88).

o MONITOR OUT jacks COMPONENT VIDEO jacks For connecting to a TV that s component video and outputting video signals (p.34).

VIDEO jack For connecting to a TV that s composite video and outputting video signals (p.34).

p SUBWOOFER PRE OUT 1-2 jacks For connecting to a subwoofer with built-in amplifier (p.41).

En

16

Remote control a

a Remote control signal transmitter

b

b z (receiver power) key

Transmits infrared signals.

PRESET: Select a preset station. TUNING: Select the radio frequency.


c Input selection keys Select an input source for playback.

c

HDMI 1-5: HDMI 1-5 jacks V-AUX: VIDEO AUX jack (on the front )

o p

e f g h

r s

t j k l m n

k Sound mode keys l INFO key

TUNER: FM/AM radio

m SLEEP key

USB: USB jack (on the front ) NET: NETWORK sources (press repeatedly to select a desired network source) PHONO: PHONO jacks

Selects the information displayed on the front display (p.96). Pressing this key repeatedly will specify the time (120 min, 90 min, 60 min, 30 min, off), in which the unit switches to the standby mode.

n Numeric keys Let you enter numerical values, such as radio frequencies.

MEMORY key

d MAIN/ZONE2 switch

s FM/AM radio stations as presets (p.71).

Changes the zone (main zone or Zone2) that is controlled by the remote control (p.90).

i

Let you perform playback operations when “USB” or “NET” is selected as the input source, or control playback of the HDMI Control-compatible playback device (p.147).

AUDIO: AUDIO 1-2 jacks (press repeatedly to select “AUDIO1” or “AUDIO2”) BLUETOOTH: Bluetooth connection (the unit as a Bluetooth receiver)

q

External device operation keys

Select a sound mode (p.64).

AV 1-6: AV 1-6 jacks

d

BAND: Switches between FM and AM radio.

e SCENE keys Select the ed input source, sound program, and various settings with one touch. Also, turns on the unit when it is in standby mode (p.63).

o HDMI OUT key (RX-V781): Selects HDMI OUT jacks to be used for video/audio output (p.62). (RX-V681): Enables/disables video/audio output from the HDMI OUT jack (p.62).

p PARTY key Turns on/off the party mode (p.91).

f PROGRAM keys Select a sound program (p.64).

g External device operation keys Displays menus for the HDMI Control-compatible playback device (p.147).

h ON SCREEN key

q VOLUME keys Adjust the volume.

r MUTE key Mutes the audio output.

s OPTION key Displays the option menu (p.97).

Displays the on-screen menu on the TV.

i Menu operation keys

Displays status information on the TV (p.97).

Cursor keys: Select a menu or the parameter. ENTER: Confirms a selected item. RETURN: Returns to the previous screen.

j Radio keys Operate the FM/AM radio when “TUNER” is selected as the input source (p.70). En

t DISPLAY key

17

PREPARATIONS General setup procedure 1 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.19) 2 Connecting a TV and playback devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.32) 3 Connecting the FM/AM antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.39) 4 Connecting a network cable or preparing the wireless antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.40) 5 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.41) 6 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.42) 7 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.43) 8 Configuring the necessary speaker settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.44) 9 Optimizing the speaker settings automatically (YPAO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.45) 10 Connecting to a network device wirelessly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.53) 11 Connecting to the MusicCast network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (p.61) This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!

En

18

1 Connecting speakers The unit has 7 built-in amplifiers. You can connect 2 to 9 speakers and up to 2 subwoofers to create the favorite acoustic space in your room. You can also apply bi-amp connections or multi-zone configurations to enhance your system (p.27). Caution • Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers. For details, see “Setting the speaker impedance” (p.23).

Ideal speaker layout

Functions of each speaker

E

0.5 to 1 m (1.6 to 3.3 ft)

0.5 to 1 m (1.6 to 3.3 ft)

1.8 m (5.9 ft)

1

9

1.8 m (5.9 ft)

2

3

Speaker type

R

9

Function

Front (L/R) 12

Produce front left/right channel sounds (stereo sounds).

Center 3

Produces center channel sounds (such as movie dialogues and vocals).

Surround (L/R) 45

Produce surround left/right channel sounds. Surround speakers also produce surround back channel sounds when no surround back speakers are connected.

Surround back (L/R) 67

Produce surround back left/right channel sounds.

Front presence (L/R) ER

Produce CINEMA DSP effect sounds or heights channel sounds of Dolby Atmos and DTS:X contents.

Subwoofer 9

Produces LFE (low-frequency effect) channel sounds and reinforces bass parts of other channels. This channel is counted as “0.1”. You can connect 2 subwoofers to the unit and place them on the left/right (or front/rear) sides of the room.

X 4

• We recommend using front presence speakers to have a full effect of the 3-dimensional sound fields. However,

5 10°~30°

the unit creates Virtual Presence Speaker (VPS) using the front, center and surround speakers to produce 3-dimensional sound fields even when no front presence speakers are connected (p.65).

10°~30°

• Use “Ideal speaker layout” (diagram on the left) as reference. You do not need to exactly adjust the speaker

6

layout to this diagram since the YPAO function of the unit will automatically optimize the speaker settings (such

7

as distances) to suit the speaker layout. • When using only one surround back speaker, place it straight behind the listening position (middle of “SBL” and “SBR” in the diagram).

0.3 m (1 ft) or more

En

19

Basic speaker configuration If you do not apply bi-amp connections or multi-zone configurations, follow the procedure below to place the speakers in your room and connect them to the unit.

⬛ Placing speakers in your room

5.1.2 system [★] (using front presence speakers)

Depending on the number of speakers, place the speakers and subwoofer in your room. This

This speaker system uses the front presence speakers to produce a natural 3-dimensional

section describes the representative speaker layout examples.

sound field, and also creates Virtual Surround Back Speaker (VSBS) using the surround

X

speakers to add a sense of depth to the rear sound field. This system is suited for enjoying not only 5.1-channel but also for 7.1-channel contents.

• To have a full effect of Dolby Atmos contents, we recommend using a speaker system with a ★ mark. However, you can also play back Dolby Atmos contents with the 7.1 system (using surround back speakers).

E

• To have a full effect of DTS:X contents, we recommend using a speaker system with a ★ mark.

R 1

• (About the number of channels) For example, “5.1.2” denotes “standard 5.1-channel plus 2 for overhead

2

speaker channels”. For details on how to place overhead speakers (presence speakers), see “Presence speaker 9

layout” (p.22).

7.1/5.1.2 system [★]

4

3

5

(using both surround back and front presence speakers) This speaker system brings out the full performance of the unit and allows you to enjoy a highly-natural 3-dimensional sound field with any contents.

X When using front presence speakers installed to the ceiling or when using the Dolby Enabled speakers as the presence speakers, configure the “Layout (Front Presence)” setting in the “Setup” menu before performing YPAO (p.44).

X • The surround back speakers and presence speakers do not produce sounds simultaneously. The unit automatically changes the speakers to be used, depending on the input signal and CINEMA DSP (p.65). • When using front presence speakers installed to the ceiling or when using the Dolby Enabled speakers as the presence speakers, configure the “Layout (Front Presence)” setting in the “Setup” menu before performing YPAO (p.44).

En

20

7.1 system (using surround back speakers)

5.1 system (front 5.1-channel) (using surround speakers)

This speaker system creates Virtual Presence Speaker (VPS) using the front, center and

We recommend using this speaker system when you cannot place speakers in the rear side of

surround speakers to produce a 3-dimensional sound field, and also allows you to enjoy

the room.

extended surround sounds using the surround back speakers. 1 1

2

9 9

2

4

5

3

3

4

5

6

7

X When placing surround speakers in the front side, set “Layout (Surround)” in the “Setup” menu to “Front” before performing YPAO (p.44).

5.1 system

5.1 system (front 5.1-channel) (using front presence speakers) 1

We recommend using this speaker system when you cannot place speakers in the rear side of

2

the room. 9

3 E

4

R 1

5

9

2

3

X You can enjoy surround sound even without the center speaker (4.1 system).

X When using front presence speakers installed to the ceiling or when using the Dolby Enabled speakers as the presence speakers, configure the “Layout (Front Presence)” setting in the “Setup” menu before performing YPAO (p.44). En

21

2.1 system

Overhead Install the presence speakers to the ceiling above the listening position. It delivers realistic overhead sound effects and sound field with excellent linkage of front and 1

2

rear sound spaces effectively.

9

Y

X

For details on the installation position of ceiling speakers, see “Notes on installation of ceiling speakers” (p.23).

Add the center speaker to configure a 3.1 system.

Dolby Enabled SP Use the Dolby Enabled speakers as the presence speakers.

Presence speaker layout

It utilizes sounds reflected from ceiling and lets you enjoy overhead sounds only from speakers The unit provides three layout patterns for presence speakers (Front Height, Overhead and

that are placed at the same level as traditional speakers.

Dolby Enabled SP). Choose a layout pattern that suits your listening environment.

X You can enjoy Dolby Atmos, DTS:X or Cinema DSP 3D with any layout pattern.

Front Height Install the presence speakers on the front side wall. It delivers a natural sound field with excellent linkage of left, right, top and bottom sound spaces, and sound extensity effectively.

X Place the Dolby Enabled speakers on top of or near the traditional front speakers. A Dolby Enabled speaker unit may be integrated into a traditional speaker. For details, refer to the instruction manual of the Dolby Enabled speakers.

En

22

Notes on installation of ceiling speakers

⬛ Setting the speaker impedance

When installing presence speakers to a ceiling, install them just above the listening position,

Under its default settings, the unit is configured for 8-ohm speakers. When using a 6-ohm

or the ceiling between the extensions of the front speakers and listening position.

speaker for any channel, set the speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.

FPR

SR

1 2

FR SBR C

Before connecting speakers, connect the power cable to an AC wall outlet. While holding down STRAIGHT on the front , press MAIN ZONE z. MAIN ZONE z

SBL FL FPL

SL

STRAIGHT

3 Caution

Check that “SP IMP.” is displayed on the front display.

52+/2ÕÕ¬MIN

• Be sure to use speakers that are made for ceiling use and take anti-drop measures. Ask a qualified contractor or dealer personnel for installation works.

4 5

Press STRAIGHT to select “6 Ω MIN”. Press MAIN ZONE z to set the unit to standby mode and remove the power cable from the AC wall outlet.

You are now ready to connect the speakers.

En

23

⬛ Connecting speakers

Speakers to be connected

Connect the speakers placed in your room to the unit.

Speaker system (the number of channels)

Speaker type

Precaution for connecting of the speaker cables Improper connecting of the speaker cables may cause short circuit and also damage the unit or the speakers. • Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers. • Twist the bare wires of the speaker cables firmly together.

7.1/5.1.2

5.1

2.1

Front (L/R) 12

⚫

⚫

⚫

Center 3

⚫

⚫

Surround (L/R) 45

⚫

⚪*3

Surround back (L/R) 67

⚪*1

Front presence (L/R) ER

⚪*2

⚪*4

⚫

⚫

Subwoofer 9

⚫

If you have nine speakers, you can use the both surround back speakers and front presence speakers. In this case, the unit automatically changes the speakers to be used, depending on the input signal and CINEMA DSP. If you have seven speakers, use two of them as surround back speakers (*1) or front presence

• Do not let the bare wires of the speaker cable touch one another.

speakers (*2). If you have five speakers, use two of them as surround speakers (*3) or front presence speakers (*4).

X • You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. • When apply this speaker configuration, set “Power Amp Assign” (p.111) to “Basic” (default).

• Do not let the bare wires of the speaker cable come into with the unit’s metal parts (rear and screws).

Cables required for connection (commercially available) Speaker cables (the number of speakers) + –

+ –

Audio pin cable (two for connecting two subwoofers) If “Check SP Wires” appear on the front display when the unit is turned on, turn off the unit, and then check the speaker cables short circuit.

En

24

Connecting speaker cables

Connection diagram Refer to the following diagram and connect the speakers to the unit.

Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent

• The illustrations of the unit (rear) used in this section are of the RX-V781.

confusion, connect the black wire to the negative and the other wire to the positive terminal.

1


Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together.

The unit (rear)

2

Loosen the speaker terminal.

3

Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the

SPEAKERS CLASS 2 WIRING CABLAGE CLASSE 2 SURROUND

CENTER

FRONT


terminal.

SINGLE

1

2

4

ZONE2/BI-AMP

SUBWOOFER

Tighten the terminal.

+ (red)

3

FR ON

T

2

4

1

- (black) E

R 1

9

Using a banana plug

2

3

(U.S.A., Canada, China, Australia, Taiwan, Brazil and General models only) 9

4

1

Tighten the speaker terminal.

2

Insert a banana plug into the end of the terminal.

5

1

Banana plug 6

7

2

Y When using only one surround back speaker, connect it to the SINGLE jack (L side).

En

25

FR ON T

Push-type speaker terminals (RX-V681 only)

1

Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable, and twist the bare wires of the cable firmly together.

2

Press down the tab.

3

Insert the bare wires of the cable into the hole in the terminal.

4

Release the tab.

1

F.P EXT RE RA SE NC SP1 E/Z O

NE

4

2

2

+ (red)

3 - (black)

Connecting the subwoofer Use an audio pin cable to connect the subwoofer. Audio pin cable

CENT

ER FRON

T

En

26

Advanced speaker configuration In addition to the basic speaker configuration (p.20), the unit also allows you to apply the following speaker configurations to enhance your system.

Using the four internal amplifiers for front speakers to have more high-quality sounds

Using the excess internal amplifiers for stereo speakers in another room

Bi-amp connection

Multi-zone configuration

(Example)

(Example)

Bi-amp connection

Zone2

Main zone

En

27

⬛ Available speaker configurations

7.1 +1Zone

Main zone Output channel (max)

Bi-amp

7 7 5

⚪

Surround back/ Front presence

Multi-zone

Power Amp Assign (p.111)

Page

Surround back

+1 (Zone2)

7.1 +1Zone

28

Front presence

+1 (Zone2)

5.1.2 +1Zone

29

5.1 BI-Amp

29

1 9

Y

2

1

2

9

3

4

5

When applying one of these configurations, you need to configure the “Power Amp Assign” setting in the “Setup” menu (p.44).

6

7 Zone2

Main zone

Speaker

Connect to

12

FRONT

3

CENTER

45

SURROUND

67

EXTRA SP2

ER

(not used)

9

SUBWOOFER 1-2

Zone2 speakers

EXTRA SP1

X When Zone2 output is enabled (p.90), the surround back speakers in the main zone do not output sound.

En

28

5.1.2 +1Zone

5.1 BI-Amp Bi-amp

E

R 1

9

2 3

1

2

1

9

4

9

5

2 3

9

4

5

Zone2

Main zone

Speaker

Connect to

Speaker

Connect to

12

FRONT

12

FRONT and EXTRA SP2 (bi-amp connection)

3

CENTER

3

CENTER

45

SURROUND

45

SURROUND

67

(not used)

67

(not used)

ER

EXTRA SP1

ER

(not used)

9

SUBWOOFER 1-2

9

SUBWOOFER 1-2

Zone2 speakers

EXTRA SP2

X When Zone2 output is enabled (p.90), the front presence speakers in the main zone do not output sound.

En

29

⬛ Connecting front speakers that bi-amp connections

Caution

and EXTRA SP2 jacks.

• Before making bi-amp connections, remove any brackets or cables that connect a woofer with a tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp connections, make sure that the brackets or cables are connected before connecting the speaker cables.

To enable the bi-amp function, configure the “Power Amp Assign” setting in the “Setup” menu

• Surround back speakers cannot be used during bi-amp connections.

When using front speakers that bi-amp connections, connect them to the FRONT jacks

after connecting the power cable to an AC wall outlet (p.44).

⬛ Connecting Zone2 speakers


When using Zone2 speakers, connect them to the EXTRA SP1 or EXTRA SP2 terminals. To utilize the EXTRA SP terminals for Zone2 speakers, configure the “Power Amp Assign”

The unit (rear) SPEAKERS CLASS 2 WIRING CABLAGE CLASSE 2 SURROUND

CENTER

FRONT

setting in the “Setup” menu after connecting the power cable to an AC wall outlet (p.44).


X

SINGLE

1

You can also connect Zone2 speakers using an external amplifier (p.88).

2

ZONE2/BI-AMP

SUBWOOFER

(when using surround back speakers in the main zone) EXTRA SP1 F.PRESENCE/ZONE2

The unit (rear) 1

SPEAKERS

2


CENTER


FRONT

SINGLE

3 9

4

1

5 9

2

FL

FR

3

4

5

6

7

Zone2

X

Main zone

The FRONT jacks and EXTRA SP2 jacks output the same signals.

En

30

(when using front presence speakers in the main zone) EXTRA SP1 F.PRESENCE/ZONE2

The unit (rear) SPEAKERS CLASS 2 WIRING CABLAGE CLASSE 2 SURROUND

CENTER


FRONT

SINGLE

E

R 1

9

2

FL

FR

3

4

5

Zone2

Main zone

En

31

2 Connecting a TV and playback devices Connect a TV and playback devices (video and audio devices) to the unit. For information on how to connect a USB storage device, see “Connecting a USB storage device” (p.76).

Input/output jacks and cables The unit is equipped with the following input/output jacks. Prepare the cables that match the jacks on your devices.

⬛ Video/audio jacks

⬛ Video jacks

To input/output video and audio signals, use the following jacks.

To input/output only video signals, use the following jacks.

HDMI jacks

COMPONENT VIDEO jacks

Transmit digital video and digital sound through a single jack. Use an HDMI cable.

Transmit video signals separated into three components: luminance (Y), chrominance blue (Pb), and chrominance red (Pr). Use a component video cable with three plugs.

HD2.2

HDMI cable (BD/DVD)

MONITOR OUT

Y

Component video cable

Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m (16.4 ft) long to prevent

VIDEO jacks

signal quality degradation.

X

Transmit analog video signals. Use a video pin cable.

• The unit’s HDMI jacks the HDMI Control, Audio Return Channel (ARC), and 3D and 4K Ultra HD video MONITOR OUT

transmission features. • Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos.

Video pin cable

En

32

⬛ Audio jacks

Connecting a TV

To input/output only audio signals, use the following jacks. Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit.

OPTICAL jacks

To maximize the performance of the unit, we recommend connecting a TV with an HDMI cable.

Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable.

⬛ HDMI connection

Digital optical cable

Connect the TV to the unit with an HDMI cable and a digital optical cable.

OPTICAL

X (RX-V781 only)

COAXIAL jacks

You can connect another TV or a projector by using the HDMI OUT 2 jack (p.34).

Transmit digital audio signals. Use a digital coaxial cable.

HDMI OUT jack

The unit (rear)

Digital coaxial cable

HD2.2 HDMI OUT

COAXIAL

HDMI input

HDMI OUT

TRIGGER OUT 12V 0.1A

HDMI 1

HDMI 2

H

HD2.2

2 HD2.2

H

HD2.2

IN 2

1

HDMI

1 ARC

(BD/DVD)

ARC

OUT

HDMI

REMOTE

OPTICAL

HDMI

ANTENNA

VIDEO

(RADIO)

FM

(TV) AV4

AM

COAXIAL AV3 Y

AUDIO jacks

PR

PB

Y

PB

PR COM

OPTICAL

AV2 OPTICAL

AV 1

Transmit analog stereo audio signals. Use a stereo pin cable (RCA cable).

AV 4 (OPTICAL) jack

MONITO

O

(TV) AV4

V

OPTICAL

VIDEO

COMPONENT VIDEO

SING

O

GND

Stereo pin cable

PHONO

AUDIO 1

AUDIO 2

ZONE 2

AV 5

AV 6

TV

SUR. BA

ZONE OUT

Audio output (digital optical)

X • You do not make a digital optical cable connection between the TV and the unit in the following cases: – If your TV s Audio Return Channel (ARC) – If you will receive TV broadcasts only from the set-top box • If you connect a TV that s HDMI Control to the unit with an HDMI cable, you can control the unit’s power and volume with the TV’s remote control.

To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the settings, see “Information on HDMI” (p.147). About Audio Return Channel (ARC) • ARC allows audio signals to travel both ways. If you connect a TV that s ARC to the unit with a single HDMI cable, you can output video/audio to the TV or input TV audio to the unit. • When using ARC, connect a TV with an HDMI cable that s ARC.

En

33

⬛ Component/composite video connection

VIDEO (composite video) connection (with a video pin cable)

When connecting any video device with a component video cable, connect the TV to the

The unit (rear)

Video input (composite video)

MONITOR OUT (COMPONENT VIDEO) jacks. TRIGGER OUT 12V 0.1A

When connecting any video device with a video pin cable, connect the TV to the MONITOR OUT

HDMI OUT

HDMI 2

HDMI 3

HD2.2

HD2.2

HD2.2

2

1

(BD/DVD)

ARC

REMOTE

OPTICAL

MONITOR OUT (VIDEO) jack

VIDEO

MONITOR OUT

ANTENNA

VIDEO

(RADIO)

FM

(TV) AV4

Y

H

HD2.2

IN

OUT

(VIDEO) jack.

HDMI 1

V

AM

VIDEO

V

COAXIAL AV3 Y

PR

PB

Y

PB

PR COMPONENT VIDEO

OPTICAL

• If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be

AV2 OPTICAL

output to the TV.

MONITOR OUT

(TV) AV4

AV 1

VIDEO VIDEO

COMPONENT VIDEO

SINGLE

OPTICAL

GND

O

• Operations with TV screen are available only when your TV is connected to the unit via HDMI.

X

PHONO

AUDIO 2

AUDIO 1

ZONE 2

AV 5

AV 6

SUR. BACK

SURROUND

ZONE OUT

C PR

O

AV 4 (OPTICAL) jack

If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable connection between the TV and the unit.

⬛ Connecting another TV or a projector

COMPONENT VIDEO connection (with a component video cable)

(RX-V781 only)

Video input (component video)

The unit has two HDMI output jacks. If you connect another TV or a projector to the unit with

COMPONENT VIDEO

MONITOR OUT (COMPONENT VIDEO) jacks

The unit (rear) TRIGGER OUT 12V 0.1A

HDMI OUT 2

HDMI 1

HDMI 2

HDMI 3

HD2.2

HD2.2

HD2.2

H

1

(BD/DVD)

ARC

REMOTE

OPTICAL

Y

PB

ANTENNA

VIDEO

(RADIO)

FM

(TV) AV4

AM

PR

PR COMPONENT VIDEO

PB

MONITOR OUT

Y

an HDMI cable, you can switch the TV (or projector) to be used for watching videos with the remote control (p.62).

PR PR

HD2.2

IN

OUT

HDMI OUT 2 jack

PB

The unit (rear)

PB Y

Y


2 HDMI OUT 2

OPTICAL

PR

Y

PB

COMPONENT VIDEO

AV2

OPTICAL

(RADIO)

FM

AM

COAXIAL SINGLE

Y

PR

PB

Y

PB

AUDIO 2

ZONE 2

AV 5

AV 6

ZONE OUT

SUR. BACK

SURROUND

C PR

HDMI input

CO

O AUDIO 1

HDMI

PR

AV2

MONITO

OPTICAL PHONO

TV (already connected)

AV3

OPTICAL

GND

ARC

ANTENNA

VIDEO

(TV) AV4

VIDEO VIDEO

COMPONENT VIDEO

H

HDMI

AV 1

H

HD2.2

(BD/DVD)

ARC

REMOTE

MONITOR OUT

(TV) AV4

OPTICAL

HDMI 2

HD2.2

1

OUT

PR

1

HDMI 1

HD2.2

IN

AV3 PB

TV

HDMI OUT HD2.2

COAXIAL

Y

TV


O

HDMI

V AV 1

VIDEO

COMPONENT VIDEO

SING

AV 4 (OPTICAL) jack


TV

GND

PHONO

AUDIO 1

AUDIO 2

ZONE 2

AV 5

AV 6

SUR. B

ZONE OUT

Projector

Y HDMI Control is not available on the HDMI OUT 2 jack.

En

34

⬛ Component video connection

Connecting video devices (such as BD/DVD players)

Connect a video device to the unit with a component video cable and an audio cable (digital Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the

optical or digital coaxial). Choose a set of input jacks (on the unit) depending on the audio

unit. Depending on the video/audio output jacks available on your video device, choose one of

output jacks available on your video device.

the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack.

Output jacks on video device Input jacks on the unit

X

Video

Audio

If the combination of video/audio input jacks available on the unit does not match your video device, change its

Digital optical

AV 1 (COMPONENT VIDEO + OPTICAL)

Digital coaxial

AV 2 (COMPONENT VIDEO + COAXIAL)

Component video

combination according to the output jacks of your device (p.35).

⬛ HDMI connection

Video output (component video)

Connect a video device to the unit with an HDMI cable. HDMI 1-5 jacks

The unit (rear) HDMI 1

HDMI 2

HDMI 3

HD2.2

HD2.2

HD2.2

HDMI 4

HDMI 1

HDMI 2

HDMI 3

HD2.2

HD2.2

HD2.2

HDMI 4

Y


HDMI 5

PR

HDMI 1

HDMI 2

H

HD2.2

HD2.2

H

2

1

(BD/DVD)

ARC

OUT

(BD/DVD) REMOTE

OPTICAL

(RADIO)

PB

PR

Y

PB

PB

ANTENNA

VIDEO

(RADIO)

FM COMPONENT VIDEO

(TV) AV4

ANTENNA

PR

HD2.2

HDMI 5

(BD/DVD)

ARC

COMPONENT VIDEO

PR

PB

HDMI OUT IN

WIRELESS

T

AV 1-2 (COMPONENT VIDEO) jacks

The unit (rear)

AM

Y

Y

COAXIAL

FM

AM

AV3 Y

PR

PB

Y

PB

PR CO

HDMI AV2 PR

Y

PB

PR

HDMI output

SPEAKERS

COMPONENT VIDEO

CLASS 2 WIRING CABLAGE SURROUND

MONITOR OUT

CENTER

MONITO

OPTICAL

V AV 1

VIDEO

COMPONENT VIDEO

SING

VIDEO VIDEO

T VIDEO

SINGLE

O1

AUDIO 2

ZONE 2

AV 5

AV 6

ZONE OUT

SUR. BACK

HDMI

1

2

SURROUND

CENTER PRE OUT

FRONT

GND

SUBWOOFER

C

C

HDMI

PHONO

AV2

AUDIO 1

AUDIO 2

ZONE 2

AV 5

AV 6

COAXIAL

SUR. B

ZONE OUT

Video device

OPTICAL

Video device

O AV 1

AV 1 (OPTICAL) jack or AV 2 (COAXIAL) jack

If you select the input source by pressing HDMI 1-5, the video/audio played back on the video device will be output from the unit.

O OPTICAL

Audio output (digital optical or digital coaxial)

If you select the input source by pressing AV 1-2, the video/audio played back on the video

Y

device will be output from the unit.

• To watch videos input to the HDMI 1-5 jacks, you need to connect your TV to the HDMI OUT jack of the unit

Y

(p.33).

The component video signals (other than 480i/576i signals) input to AV 1-2 jacks of the unit can be output from

• If your video device s HD 2.2, connect the device to the HDMI 1-3 jacks.

the MONITOR OUT (COMPONENT VIDEO) jacks only. To watch those videos, you need to connect your TV to the MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.34). For details, refer to “Video signal flow” (p.146).

En

35

⬛ Composite video connection

⬛ Changing the combination of video/audio input jacks

Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial,

If the combination of video/audio input jacks available on the unit does not match your video

digital optical, or stereo pin cable). Choose a set of input jacks (on the unit) depending on the

device, change its combination according to the output jacks of your device. You can connect

audio output jacks available on your video device.

a video device that has the following video/audio output jacks.

Output jacks on video device

Output jacks on video device

Input jacks on the unit

Input jacks on the unit Video

Audio

Composite video

Video

Digital coaxial

AV 3 (VIDEO + COAXIAL)

Digital optical

AV 4 (VIDEO + OPTICAL)

Analog stereo

AV 5-6 (VIDEO + AUDIO)

AV 3-6 (VIDEO) jack

The unit (rear)

Video output (composite video)

HDMI OUT

HDMI 1

HDM

HD2.2

HDC

V

HD2.2

IN 2

Component video

VIDEO

VIDEO


HDMI

Audio

Video

Audio

Digital optical

HDMI 1-5

Digital coaxial

HDMI 1-5

Analog stereo

HDMI 1-5

Analog stereo

AV 1-2 (COMPONENT VIDEO)

AV 1 (OPTICAL) AV 4 (OPTICAL) AV 2-3 (COAXIAL) AV 5-6 (AUDIO) AUDIO 1-2 AV 5-6 (AUDIO) AUDIO 1-2

V

1

(BD/DVD)

ARC

OUT

REMOTE

OPTICAL

ANTENNA

VIDEO

(RADIO)

FM

(TV) AV4

Necessary setting

A

COAXIAL AV3 Y

PR

PB

Y

Video device

OPTICAL

PB

O

AV2

O

For example, if you have connected a video device to AV 2 (COMPONENT VIDEO) and AV 5

OPTICAL

OPTICAL AV 1

VIDEO

COMPONENT VIDEO

(AUDIO) jacks of the unit, change the combination setting as follows.

COAXIAL

C

GND

C

Video output (component video)

COAXIAL PHONO

AUDIO 1

AUDIO 2

AV 5

AV 6

L

Z

L

L

R

R

R

COMPONENT VIDEO

The unit (rear) AV 2 (COMPONENT VIDEO) jacks


Any of AV 3 (COAXIAL) jack, AV 4 (OPTICAL) jack, AV 5-6 (AUDIO) jacks

Audio output (either digital optical, digital coaxial, or analog stereo)

HDMI OUT

HDMI 1

HDMI 2

HD2.2

HD2.2

HD2.2

IN 2

(BD/DVD)

ARC

OUT

Y

PR

PB

REMOTE

OPTICAL

ANTENNA

VIDEO

(RADIO)

FM

(TV) AV4

AV2

If you select the input source by pressing AV 3-6, the video/audio played back on the video

PR

1

PR

PR

PB

PB

Y

Y

PB

AM

COAXIAL

Y

AV3 Y


PR

PB

Y

PB

AV2 OPTICAL

Y

AV 1

AUDIO

VIDEO

COMPONENT VIDEO

L

GND

L

L

To watch videos input to the AV 3-6 (VIDEO) jacks, you need to connect your TV to the HDMI OUT jack (p.33) or to PHONO

the MONITOR OUT (VIDEO) jack (p.34) of the unit. For details, refer to “Video signal flow” (p.146).

AUDIO 1

AUDIO 2

ZONE

AV 5

AV 6

ZONE O

R

R

R AV 5

AV 5 (AUDIO) jacks

En

36

Audio output (analog stereo)

Video device

Y The following operation is available only when your TV is connected to the unit via HDMI.

1

7

Use the Cursor keys to select “AV5” (audio input jack to be used).

8

Press ON SCREEN.

After connecting external devices (such as a TV and playback devices) and power cable of the unit, turn on the unit.

2

Press AV 2 to select “AV 2” (video input jack to be used) as the input source. AV 2

This completes the necessary settings. If you select “AV 2” as the input source by pressing AV 2, the video/audio played back on the

ON SCREEN Cursor keys ENTER

3 4 5

video device will be output from the unit.

Press ON SCREEN. Use the Cursor keys to select “Input” and press ENTER. Use the Cursor keys (e/r) to select “AV2” (video input jack to be used) and press the Cursor key (q).

6

Use the Cursor keys to select “Audio In” and press ENTER.

En

37

Connecting audio devices (such as CD players)

Connecting to the jacks on the front

Connect audio devices such as CD players, MD players, and a turntable to the unit. Depending

Use the VIDEO AUX jack to temporarily connect a playback device to the unit.

on the audio output jacks available on your audio device, choose one of the following

Use the USB jack to connect a USB storage device. For details, see “Connecting a USB storage

connections.

device” (p.76).

Audio output jacks on audio device

Before making a connection, stop playback on the device and turn down the volume on the

Audio output jacks on the unit

unit.

AV 1 (OPTICAL)

Digital optical

AV 4 (OPTICAL)

Digital coaxial

⬛ HDMI connection

AV 2-3 (COAXIAL)

Connect an HDMI-compatible device (such as game consoles and camcorders) to the unit with

AV 5-6 (AUDIO)

Analog stereo

an HDMI cable.

AUDIO 1-2

Turntable (PHONO)

PHONO BD DVD

The unit (rear)

Audio output (either digital optical, digital coaxial, or analog stereo)

AV 1-6 jacks AUDIO 1-2 jacks

PHONES

YPAO MIC

TONE CONTROL

TV

NET

PROGRAM

SILENT CINEMA


O HDMI OUT 2

HDMI 1

HDMI 2

HDMI 3

HD2.2

HD2.2

HD2.2

HDMI 4

OPTICAL

1

REMOTE

OPTICAL

VIDEO

OPTICAL

(TV) AV4

FM

AM

COAXIAL

O

COAXIAL

Y

PB

PR

L

COMPONENT VIDEO

AV2

C

OPTICAL

MONITOR OUT

R

VIDEO AV 1

1A

Audio device

L PR

5V

(RADIO)

AV3 PB

HDMI IN

USB

C

ANTENNA

COAXIAL

Y

(CONNECT)

VIDEO AUX

The unit (front)

(BD/DVD)

ARC

STRAIGHT

HDMI

HD2.2

IN

OUT

RADIO

VIDEO

COMPONENT VIDEO

SINGLE

L

R

GND

PHONO

AUDIO 1

AUDIO 2

ZONE 2

AV 5

AV 6

SUR. BACK

ZONE OUT

SURROUND

CENTER PRE OUT

Game console

R

PHONO

L

L

L

R

R

GND

R

GND PHONO

PHONO jacks

Ground lead

Turntable

Camcorder

Audio output (PHONO)

If you select the input source by pressing AV 1-6, AUDIO or PHONO, the audio played back on

If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played back on the

the audio device will be output from the unit.


Y

When connecting a turntable

• To watch videos input to the VIDEO AUX (HDMI IN) jack, you need to connect your TV to the HDMI OUT jack of

• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a low-output MC cartridge, use a boosting transformer.

the unit (p.33). • You need to prepare an HDMI cable that match the output jacks on your device.

• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.

En

38

3 Connecting the FM/AM antennas Connect the supplied FM/AM antennas to the unit. Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface. FM antenna

AM antenna

The unit (rear) TRIGGER OUT 12V 0.1A WIRELESS

HDMI OUT

HDMI 1

HDMI 2

HDMI 3

HD2.2

HD2.2

HD2.2

HDMI 4

NETWORK

HDMI 5

(NET)

HD2.2

IN 2

1 ARC

OUT

(BD/DVD)

REMOTE

OPTICAL

ANTENNA

VIDEO

(RADIO)

FM

(TV) AV4

AM

COAXIAL AV3 Y

PB

PR

Y

PB

PR COMPONENT VIDEO

AV2

MONITOR OUT

OPTICAL

SPEAKERS CLASS 2 WIRING CABLAGE CLASSE 2 SURROUND

CENTER

FRONT

VIDEO AV 1

COMPONENT VIDEO

VIDEO

Assembling and connecting the AM antenna

Hold down

Insert

Release

X • Unwind only the length of cable needed from the AM antenna unit. • The wires of the AM antenna have no polarity.

En

39

4 Connecting a network cable or preparing the wireless antenna Connect the unit to a router (access point) with a network cable, or prepare the wireless

Y

antenna for establishing a wireless network connection.

• Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the unit to the network devices or the Internet. In these cases, configure the security

You can enjoy Internet radio or music files stored on media servers, such as PCs and Network

software or firewall settings appropriately.

Attached Storage (NAS), on the unit.

• Each server must be connected to the same subnet as the unit. • To use the service via the Internet, broadband connection is strongly recommended.

Connecting the network cable

Preparing the wireless antenna

Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable).

If you want to establish a wireless network connection, stand the wireless antenna up straight. Network Attached Storage (NAS)

Internet

For information on how to connect the unit to a network device wirelessly, see “Connecting to a network device wirelessly” (p.53).

WAN

LAN

Modem PC Network cable

The unit (rear) ESS

Router

WIREL

WIRELESS NETWORK (NET)


Mobile device

Y SPEAKERS CLASS 2 WIRING CABLAGE CLASSE 2

Do not apply excessive force on the antenna. Doing so may damage it.

EXTRA SP2

X • If you want to use a wired (network cable) connection when a wireless connection has been made, set “Network Connection” (p.119) in the “Setup” menu to “Wired”. • If you are using a router that s DH, you do not need to configure any network settings for the unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure the network settings if your router does not DH or if you want to configure the network parameters manually (p.119). • You can check whether the network parameters (such as IP address) are properly assigned to the unit in “Network” (p.127) in the “Information” menu.

En

40

5 Connecting other devices d FRONT jacks

Connect an external power amplifier or a device compatible with the trigger function.

Output front channel sounds.

e SUBWOOFER1-2 jacks

Connecting an external power amplifier

For connecting a subwoofer with built-in amplifier. When 2 subwoofers are connected, the same sound is output from them.

(RX-V781 only) When connecting an external power amplifier (pre-main amplifier) to enhance speaker output,

Connecting a device compatible with the trigger function

connect the input jacks of the power amplifier to the PRE OUT jacks of the unit. The same channel signals are output from the PRE OUT jacks as from their corresponding SPEAKERS terminals.

The trigger function can control an external device in conjunction with operating the unit (such Caution

as powering on/off and input selection). If you have a Yamaha subwoofer that s a

• To prevent the generation of loud noises or abnormal sounds, make sure the followings before making connections.

system connection or a device with a trigger input jack, you can use the trigger function by connecting the external device to the TRIGGER OUT jack with a monaural mini-jack cable.

– Remove the power cable of the unit and turn off the external power amplifier before connecting them.

TRIGGER OUT jack

– When using the PRE OUT jacks, do not connect speakers to the corresponding SPEAKERS terminals. – When using an external amplifier that does not have the volume control by, do not connect other devices (except the unit) to the amplifier.



HDMI OUT

HDMI 1

HDMI 2

HD2.2

HD2.2

2

1

(BD/DVD)

ARC

REMOTE

OPTICAL

ANTENNA

VIDEO

(RADIO)

FM

(TV) AV4

The unit (rear)

System connector jack

HD2.2

IN

OUT

AM

COAXIAL AV3 Y

HDMI 2

HDMI 3

P2.2

HD2.2

HD2.2

PR

Y

PB

PR

MO

OPTICAL

NETWORK

HDMI 5

HDMI 4

PB

AV2

WIRELESS

MI 1

(NET)

AV 1 DVD)

VIDEO

COMPONENT VIDEO


GND

ANTENNA (RADIO)

FM

AM

PHONO

Y

PB

PR

AUDIO 1

AUDIO 2

ZONE 2

AV 5

AV 6

ZONE OUT

Yamaha subwoofer that s a system connection

SPEAKERS

COMPONENT VIDEO


MONITOR OUT

CENTER

FRONT


VIDEO

SINGLE

The unit (rear)

SINGLE

1

X

2

ZONE 2

AV 6

ZONE OUT

SUR. BACK

SURROUND

CENTER PRE OUT

FRONT

SUBWOOFER

ZONE2/BI-AMP

You can configure the trigger function settings in “Trigger Output” (p.124) in the “Setup” menu.

abc de a SUR. BACK jacks Output surround back channel sounds. When using only one external amplifier for the surround back channel, connect it to the SINGLE jack (L side).

b SURROUND jacks Output surround channel sounds.

c CENTER jack Outputs center channel sounds.

En

41

6 Connecting the power cable Before connecting the power cable (Taiwan, Brazil and General models only) Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–120/220–240 V, 50/60 Hz.

Y Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential fire hazard.

VOLTAGE SELECTOR The unit (rear)

VOLTAGE SELECTOR


220V240V 110V120V


NT

SINGLE

ZONE2/BI-AMP

After all the connections are complete, plug in the power cable. The unit (rear) To an AC wall outlet

NETWORK (NET)


SPEAKERS WIRING CABLAGE CLASSE 2 CENTER

FRONT


SINGLE

ZONE2/BI-AMP

En

42

7 Selecting an on-screen menu language z

Select the desired on-screen menu language from English (default), Japanese, French, German, Spanish, Russian, Italian and Chinese.

1 2

Press z (receiver power) to turn on the unit. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack).

X If you turn on the unit for the first time, the message regarding the network setup appears. For now, press RETURN and proceed to Step 3.

ON SCREEN

Cursor keys ENTER RETURN

3 4

Press ON SCREEN.

5

Use the Cursor keys (e/r) to select “Language” and the

Use the Cursor keys to select “Setup” and press ENTER.

Cursor keys (q/w) to select the desired language.

6

To confirm the setting, press ENTER.

En

43

7

To exit from the menu, press ON SCREEN.

X The information on the front display is provided in English only.

8 Configuring the necessary speaker settings z HDMI 1

2

3

If you use any of the following speaker configurations, follow the procedure below to configure the corresponding speaker settings

4

manually before performing YPAO. 5

V-AUX

• Using bi-amp connection (p.30) or Zone2 speakers (p.30)

AV 1

2

3

5

6

AUDIO

TUNER

BLUETOOTH

USB

NET

PHONO

PARTY

HDMI OUT

MAIN

ZONE 2

4

• Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT) (p.21) • Using the presence speakers for Dolby Atmos or DTS:X playback (p.22)

SCENE BD DVD

TV

NET

PROGRAM MUTE

TOP MENU

1 2

RADIO

VOLUME

POP-UP/MENU

ON SCREEN

X Cursor keys ENTER

RETURN

Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack).

ON SCREEN

OPTION

ENTER

Press z (receiver power) to turn on the unit.

If you turn on the unit for the first time, the message regarding the network setup appears. For now, press RETURN and proceed to Step 3.

DISPLAY

BAND MODE

TUNING

PRESET

SUR. DECODE STRAIGHT MOVIE

MUSIC

INFO

SLEEP

1

2

5

6

7

8

9

0

MEMORY

ENT

ENHANCER PURE DIRECT

3

4

3 4 5

Press ON SCREEN. Use the Cursor keys to select “Setup” and press ENTER. Use the Cursor keys and ENTER to select “Speaker” and then “Manual Setup”.

6

Configure the corresponding speaker settings. • When using bi-amp connection or Zone2 speakers, select “Power Amp Assign” (p.111), then select your speaker system. • When using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT), select “Configuration” ➞ “Layout” ➞ “Surround” (p.112), then select “Front”. • When using the presence speakers for Dolby Atmos or DTS:X playback, select “Configuration” ➞ “Layout” ➞ “Front Presence” (p.113), then select your front presence speaker layout.

7

To exit from the menu, press ON SCREEN. En

44

9 Optimizing the speaker settings automatically (YPAO) z HDMI 1

2

3

The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your

4

5

4

Place the YPAO microphone at your listening position and

listening position(s), and then automatically optimizes the speaker

connect it to the YPAO MIC jack on the front .

settings, such as volume balance and acoustic parameters, to suit your

X

V-AUX AV

1

2

3

4

5

6

AUDIO

TUNER

BLUETOOTH

USB

NET

PHONO

PARTY

HDMI OUT

room. MAIN

ZONE 2

X

ears). We recommend the use of a tripod as a microphone stand. You can use the

The YPAO function of the unit adopts the YPAO-R.S.C. (Reflected Sound Control) technology that enables to create natural sound fields like a room specifically designed

SCENE BD DVD

Place the YPAO microphone at your listening position (same height as your

TV

NET

PROGRAM MUTE

RADIO

for acoustic perfection.

tripod screws to stabilize the microphone.

YPAO MIC jack

Y

VOLUME

The unit (front)

YPAO MIC

Note the following regarding YPAO measurement. TOP MENU

– Test tones are output at high volume and may surprise or frighten small children.

POP-UP/MENU

ON SCREEN

– Test tone volume cannot be adjusted.

OPTION

1

– Keep the room as quiet as possible. ENTER

2

– Stay in a corner of the room behind the listening position so that you do not become an obstacle between speakers and the YPAO microphone.

RETURN

DISPLAY

RETURN

9

– Do not connect headphones.

3

BAND MODE

TUNING

PRESET


MUSIC

INFO

SLEEP

1

2

3

5

6

7

8

9

0

MEMORY

ENT


4

1 2

Press z (receiver power) to turn on the unit. Turn on the TV and switch the TV input to display video

4

YPAO 5 microphone

from the unit (HDMI OUT jack).

X

Ear height

If you turn on the unit for the first time, the message regarding the network setup appears. For now, press RETURN and proceed to Step 3.

3

Turn on the subwoofer and set the volume to half. If the crossover frequency is adjustable, set it to maximum. VOLUME

MIN

MAX

CROSSOVER/ HIGH CUT

MIN

9

MAX

En

45

(RX-V681)

5

The following screen appears on the TV.

(RX-V781 only) If desired, change the measuring method (multi/single).

1

Use the Cursor keys to select “Multi Position” and press ENTER.

2

Use the Cursor keys to select a setting and then press ENTER.

This completes the preparations. See “Measuring at one listening position (single measure)” (p.47) to start the measurement. (RX-V781) Settings

The following screen appears on the TV. Cursor keys ENTER RETURN

Proceed to Step 5.

Yes

Select this option if you will have several listening positions or if you want others to enjoy surround sound. You can take measurements at up to 8 different positions in the room. The speaker settings will be optimized to suit the area defined by those positions (multi measure).

No (default)

Select this option if your listening position will always be fixed. Take the measurements at only one position. The speaker settings will be optimized to suit that position (single measure).

X

X

• If you perform the multi measure, the speaker settings will be optimized for you to

• To cancel the operation, disconnect the YPAO microphone before starting the measurement.

enjoy surround sound in a wider space. • If you perform the multi measure, first place the YPAO microphone at the listening

• To configure the power amplifier assignment setting, press RETURN and select “Manual Setup” (p.111).

En

46

position you will be seated most frequently.

Single measure

Multi measure (5 listening positions)

Measuring at one listening position (single measure) Follow the procedure below for measurement. It takes about 3 minutes to perform the measurement.

a

d

e bac

1

To start the measurement, use the Cursor keys to select “Measure” and press ENTER. The measurement will start in 10 seconds. Press ENTER again to start the measurement immediately.

X Multi measure (1 listening position + front/back/left/right)

To cancel the measurement temporarily, press RETURN.

Multi measure (2 listening positions + front/back)

The following screen appears on the TV when the measurement finishes.


b c a e d

c a b d

Y This completes the preparations. See the following page to start the

If any error message (such as E-1) or warning message (such as W-1) appears, see

measurement.

“Error messages” (p.51) or “Warning messages” (p.52).

X

When “Multi Position” is set to “Yes”:

To check the measurement results, select “Result”. For details, see “Checking the measurement results” (p.50).

“Measuring at multiple listening positions (multi measure) (RX-V781 only)” (p.48)

2

When “Multi Position” is set to “No”:

Use the Cursor keys to select “Save/Cancel” and press ENTER.

“Measuring at one listening position (single measure)” (p.47)

En

47

3

To save the measurement results, use the Cursor keys (e/r) to select “SAVE” and press ENTER.

Measuring at multiple listening positions (multi measure) (RX-V781 only) When “Multi Position” is set to “Yes”, follow the procedure below for measurement. It takes about 10 minutes to measure 8 listening positions.

Y If any error message (such as E-1) or warning message (such as W-1) appears, see “Error messages” (p.51) or “Warning messages” (p.52).

1

The adjusted speaker settings are applied.

To start the measurement, use the Cursor keys to select “Measure” and press ENTER.

X

The measurement will start in 10 seconds. Press ENTER again to

To finish the measurement without saving the result, select “CANCEL”.

start the measurement immediately.

4 Cursor keys ENTER RETURN

Use the Cursor keys (e/r) to select “YES” or “NO” to

X

enable/disable YPAO Volume and press ENTER.

To cancel the measurement temporarily, press RETURN.

The following screen appears on the TV when the measurement at the first position finishes.

X • If YPAO Volume is enabled, the high- and low-frequency levels are automatically adjusted according to the volume so that you can enjoy natural sounds even at low volume. • You can also enable/disable YPAO Volume in “YPAO Volume” (p.98) in the “Option” menu.

2

Move the YPAO microphone to the next listening position and press ENTER. Repeat Step 2 until measurements at all listening positions (up to

5

Disconnect the YPAO microphone from the unit.

This completes optimization of the speaker settings. Caution • The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). En

48

8) have been taken.

3

When the measurements at the positions you want to

6

measure are completed, use the Cursor keys to select “CANCEL” and press ENTER.

Use the Cursor keys (e/r) to select “YES” or “NO” to enable/disable YPAO Volume and press ENTER.

When you have taken measurements at 8 listening positions, the following screen appears automatically.

X • If YPAO Volume is enabled, the high- and low-frequency levels are automatically adjusted according to the volume so that you can enjoy natural sounds even at low volume.

X

• You can also enable/disable YPAO Volume in “YPAO Volume” (p.98) in the

To check the measurement results, select “Result”. For details, see “Checking

“Option” menu.

the measurement results” (p.50).

Cursor keys ENTER

4

Use the Cursor keys to select “Save/Cancel” and press

Disconnect the YPAO microphone from the unit.

This completes optimization of the speaker settings.

ENTER.

5

7

To save the measurement result, use the Cursor keys to select “SAVE” and press ENTER.

The adjusted speaker settings are applied.

X To finish the measurement without saving the result, select “CANCEL”.

En

49

Caution • The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment).

Checking the measurement results

Reloading the previous YPAO adjustments

You can check the YPAO measurement results.

When the speaker settings you have configured manually are not

1

suitable, follow the procedure below to discard the manual settings and

After the measurement, use the Cursor keys to select “Result” and press ENTER.

reload the previous YPAO adjustments.

1

X

and then “Result” (p.108).

You can also select “Result” from “Auto Setup” (p.109) in the “Setup” menu, which displays the previous measurement results.

2

The following screen appears.

Use the Cursor keys to select “Setup Reload” and press ENTER.

a

ON SCREEN

In the “Setup” menu, select “Speaker”, “Auto Setup”,

b


c a Measurement result items b Measurement result details c The number of measured positions (when multi measure is performed) * RX-V781 only

2

Use the Cursor keys to select an item. Polarity of each speaker Wiring

Reverse: The speaker cable may be connected with the reverse polarity (+/-). Size of each speaker (cross-over frequency of the subwoofer)

Size

Large: The speaker can reproduce low-frequency signals effectively. Small: The speaker cannot reproduce low-frequency signals effectively.

3

Distance

Distance from the listening position to each speaker

Level

Output level adjustment for each speaker

To finish checking the results and return to the previous screen, press RETURN. En

50

3


Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again.

Error message

Cause

Remedy

E-1: No Front SP

Front speakers are not detected.

E-2: No Sur. SP

One of the surround speakers cannot be detected.

E-3: No F.PRNS SP

One of the presence speakers cannot be detected.

E-4: SBR ➞ SBL

A surround back speaker is connected to the R side only.

When using only one surround back speaker, you need to connect it to the SINGLE jack (L side). Follow the on-screen instructions to exit YPAO, turn off the unit, and then reconnect the speaker.

E-5: Noisy

The noise is too loud.

Keep the room quiet and follow the on-screen instructions to start the measurement again. If you select “PROCEED”, YPAO takes the measurement again and ignores any noise detected.

E-6: Check Sur.

Surround back speakers are connected, but no surround speakers are connected.

Surround speakers need to be connected in order to use surround back speakers. Follow the on-screen instructions to exit YPAO, turn off the unit, and then reconnect the speakers.

E-7: No MIC

The YPAO microphone has been removed.

Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the measurement again.

E-8: No Signal

The YPAO microphone cannot detect test tones.

Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the measurement again. If this error occurs repeatedly, the nearest authorized Yamaha dealer or service center.

E-9: Cancel

The measurement has been canceled.

Follow the on-screen instructions to start the measurement again. To cancel the measurement, select “EXIT”.

E-10: Internal Error

An internal error has occurred.

Follow the on-screen instructions to exit YPAO, turn off and on the unit. If this error occurs repeatedly, the nearest authorized Yamaha dealer or service center.

Follow the on-screen instructions to exit YPAO, turn off the unit, and then check the speaker connections.

En

51

Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.

Warning message

Cause

Remedy Select “Wiring” in “Result” (p.50) and check the cable connections (+/-) of the speaker identified by “Reverse”. If the speaker is connected incorrectly:

W-1: Out of Phase

A speaker cable may be connected with the reverse polarity (+/-).

Turn off the unit and then reconnect the speaker cable. If the speaker is connected correctly: Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. In this case, you can ignore the message.

W-2: Over Distance

A speaker is placed more than 24 m (80 ft) from the listening position.

Select “Distance” in “Result” (p.50) and move the speaker identified by “>24.00m (>80.0ft)” within 24 m (80 ft) of the listening position.

W-3: Level Error

There are significant volume differences between the speakers.

Check the usage environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. We recommend using the same speakers or speakers with specifications that are as similar as possible.

En

52

10 Connecting to a network device wirelessly ⬛ Connecting without a wireless router (access point)

Connect the unit to a wireless router (access point) or a mobile device by establishing a wireless connection.

Connect a mobile device to the unit directly. You can use the application for smartphone / tablet “AV CONTROLLER” (p.7) to control the unit

Selecting the connection method

from mobiles devices or enjoy music files stored on mobiles devices on the unit.

Select a connection method according to your network environment.

⬛ Connecting with a wireless router (access point) Connect the unit to a wireless router (access point). You can enjoy Internet radio, AirPlay, or music files stored on media servers (PC/NAS) on the Mobile device (such as iPhone)

unit.

The unit

For details on connection, see “Connecting a mobile device to the unit directly (Wireless

Internet

Direct)” (p.59).

Wireless router

Y • You cannot use Wireless Direct simultaneously with the wired (network cable) connection (p.40) or the wireless network connection (p.54).

Modem

• When Wireless Direct is enabled, the following functions are not available. – Internet radio – Network services – Playback of music stored on media servers (PC/NAS)

Mobile device (such as iPhone) The unit

For details on connection, see “Connecting the unit to a wireless network” (p.54).

Y • You cannot use the wireless network connection simultaneously with the wired (network cable) connection (p.40) or Wireless Direct (p.59). • If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless router (access point). In such case, place them close to each other.

En

53

Connecting the unit to a wireless network There are several methods to connect the unit to a wireless network. z

Select a connection method according to your environment. • Using MusicCast CONTROLLER (p.61) • Sharing the iOS device setting (p.54)

4 5 6

Use the Cursor keys to select “Setup” and press ENTER. Use the Cursor keys (e/r) to select “Network”. Use the Cursor keys (q/w) to select “Network Connection” and press ENTER.

• Using the WPS push button configuration (p.55)

7

• Using other connection methods (p.56)

Use the Cursor keys (q/w) and ENTER to check “Wireless (Wi-Fi)” and select “OK”.

⬛ Sharing the iOS device setting You can easily set up a wireless connection by applying the connection settings on iOS devices (iPhone/iPad/iPod touch). ON SCREEN

Before proceeding, confirm that your iOS device is connected to a wireless router.

Cursor keys ENTER

Y If you set up a wireless connection with this method, the following settings will be initialized.

X

– Network settings

The checkmark indicates the current setting.

– Bluetooth settings

8

– USB and network items ed as shortcuts – Internet radio stations to “Bookmarks”

X • You need iOS device with iOS 7 or later. (The following procedure is a setup example for iOS 8.) • This configuration does not work if the security method of your wireless router (access point) is WEP. In this case, use other connection method.

1 2


Y Operations with TV screen are available only when your TV is connected to the unit via HDMI.

3

Use the Cursor keys (q/w) and ENTER to check “Share Wi-Fi Settings (iOS)” and select “NEXT”.

– information for the network services

Press ON SCREEN. En

54

9

After checking the on-screen message, use the Cursor keys (e/r) and ENTER to select “NEXT”.

z HDMI 1

2

3

You can easily set up a wireless connection with one push of the WPS button.

Y

4

5

⬛ Using the WPS push button configuration

This configuration does not work if the security method of your wireless router (access

V-AUX AV

1

2

3

4

5

6

AUDIO

TUNER

BLUETOOTH MAIN

NET

PHONO

PARTY

HDMI OUT

USB

ZONE 2

point) is WEP. In this case, use other connection method.

1 2

SCENE BD DVD

TV

NET

PROGRAM MUTE

RADIO

10 On the iOS device, select the unit as the AirPlay speaker in

VOLUME

the Wi-Fi screen. ON SCREEN

OPTION

RETURN

connection method.

MODE

PRESET

SUR. DECODE STRAIGHT MUSIC

INFO

SLEEP

1

2

3

5

6

7

8

9

0

MEMORY

ENT


4

Push the WPS button on the wireless router (access

If “Not connected” appears, repeat from Step 1 or try another

BAND

MOVIE

3

the front display.

DISPLAY

TUNING

“Press WPS button on Access Point” appears on the front display.

When the connection process finishes, “Completed” appears on Cursor keys ENTER

ENTER

Hold down INFO (WPS) on the front for 3 seconds.

point).

POP-UP/MENU

TOP MENU


The name of the unit

11 Check the network currently selected and tap “Next”. Tap here to start setup

The network currently selected

When the sharing process finishes, the unit is automatically connected to the selected network (access point).

En

55

⬛ Using other connection methods If your wireless router (access point) does not WPS push button z

configuration method, follow the procedure below to configure the

8

Use the Cursor keys (q/w) and ENTER to select the desired connection method and select “NEXT”.

wireless network settings.

1 2


Y Operations with TV screen are available only when your TV is connected to the

The following connection methods are available.

unit via HDMI.

ON SCREEN

Cursor keys ENTER

3 4 5 6

WPS Button

You can set up a wireless connection with the WPS button while viewing the TV screen. Follow the instructions displayed on the TV screen.

Use the Cursor keys to select “Setup” and press ENTER.

Share Wi-Fi Settings (iOS)

See “Sharing the iOS device setting” (p.54).

Use the Cursor keys (e/r) to select “Network”.

Access Point Scan

You can set up a wireless connection by searching for an access point. For details on settings, see “Searching for an access point” (p.57).

Press ON SCREEN.

Use the Cursor keys (q/w) to select “Network Connection” and press ENTER.

7

Manual Setting

Use the Cursor keys (q/w) and ENTER to check “Wireless (Wi-Fi)” and select “OK”. PIN Code

You can set up a wireless connection by entering the required information (such as SSID) manually. For details on settings, see “Setting up the wireless connection manually” (p.57). You can set up a wireless connection by entering the unit’s PIN code into the wireless router (access point). The method is available if the wireless router (access point) s the WPS PIN code method. For details on settings, see “Using the PIN code” (p.58).

About WPS WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy establishment of a wireless home network.

X The checkmark indicates the current setting.

En

56

Searching for an access point

Setting up the wireless connection manually

If you select “Access Point Scan” as the connection method, the unit

If you select “Manual Setting” as the connection method, the wireless

starts searching for access points. After a while, the list of available

connection setting screen appears on the TV.

access points appears on the TV screen.

You need to setup the SSID (network name), encryption method and

1

security key for your network.

Use the Cursor keys and ENTER to check the desired

1

access point and select “NEXT”.

access point and select “NEXT”.

The wireless connection setting screen appears on the TV.

2

Use the Cursor keys and ENTER to enter the SSID of the

Use the Cursor keys and ENTER to enter the security key and select “NEXT”.

ON SCREEN

Cursor keys ENTER

2

Use the Cursor keys (q/w) and ENTER to check the security method of the access point and select “NEXT”.

3

Use the Cursor keys (e/r) to select “CONNECT” and press ENTER to start the connection process. When the connection process finishes, “Completed” appears on the TV screen. If “Not connected” appears, repeat from Step 1 or try another connection method.

4


En

57

Settings None, WEP, WPA2-PSK (AES), Mixed Mode

3

Use the Cursor keys and ENTER to enter the security key

Using the PIN code If you select “PIN Code” as the connection method, the list of available

and select “NEXT”.

access points appears on the TV screen.

If you select “None” in Step 2, this setting is not available. Proceed to Step 4. If you select “WEP”, enter either 5 or 13 character string, or 10 or 26

1

Use the Cursor keys and ENTER to check the desired access point and select “NEXT”.

hexadecimal digits.

The PIN code of the unit appears on the TV screen.

If you select other method, enter either 8 to 63 character string, or

2

64 hexadecimal digits.

Enter the unit’s PIN code into the wireless router (access point). For details on settings, refer to the instruction manual of the wireless router (access point).

3

ON SCREEN

Use the Cursor keys (e/r) to select “CONNECT” and press ENTER to start the connection process.

Cursor keys ENTER

When the connection process finishes, “Completed” appears on

4

the TV screen.

Use the Cursor keys (e/r) to select “CONNECT” and

If “Not connected” appears, repeat from Step 1 or try another

press ENTER to start the connection process. When the connection process finishes, “Completed” appears on the TV screen. If “Not connected” appears, check that all the information is entered correctly, and repeat from Step 1.

5


En

58

connection method.

4


Connecting a mobile device to the unit directly (Wireless Direct) z

7

Use the Cursor keys (q/w) and ENTER to check “Wireless Direct” and select “OK”.

Follow the procedure below to connect a mobile device to the unit directly.

Y Wireless Direct connection may be insecure since the communication is not strongly encrypted. The unit may operate by playback operation on wireless devices connected to the unit without permission.

1 2


The checkmark indicates the current setting.

8

from the unit (HDMI OUT jack).

ON SCREEN

X

Turn on the TV and switch the TV input to display video

Y

Use the Cursor keys (q/w) and ENTER to check the desired security method and select “NEXT”.

Operations with TV screen are available only when your TV is connected to the

Cursor keys ENTER

unit via HDMI.

3 4 5 6

Press ON SCREEN. Use the Cursor keys to select “Setup” and press ENTER. Use the Cursor keys (e/r) to select “Network”. Use the Cursor keys (q/w) to select “Network

Settings None, WPA2-PSK (AES)

Connection” and press ENTER.

Y If you select “None”, the connection may be insecure since the communication is not encrypted.

En

59

9

Use the Cursor keys and ENTER to enter the security key

11 Configure the Wi-Fi settings of a mobile device.

and select “NEXT”.

For details on settings of your mobile device, refer to the

If you select “None” in Step 8, this setting is not available. Proceed

instruction manual of the mobile device.

to Step 10.

1

Enable the Wi-Fi function on the mobile device.

2

Select the SSID displayed in Step 10 from the list of available

Otherwise, enter either 8 to 63 character string, or 64 hexadecimal digits.

access points.

3

When you are prompted for a , enter the security key displayed in Step 10.

12 To exit from the menu, press ON SCREEN. ON SCREEN

Cursor keys ENTER

10 Use the Cursor keys (e/r) to select “OK” and press ENTER to save the setting. The settings made appear on the TV screen.

The SSID and security key information is required for setup of a mobile device.

En

60

11 Connecting to the MusicCast network z HDMI 1

2

3

MusicCast is a brand new wireless musical solution from Yamaha,

Adding the unit to the MusicCast network

allowing you to share music among all of your rooms with a variety of

4

5

devices. You can enjoy music from your smartphone, PC, NAS drive and

Follow the procedure below to add the unit to the MusicCast network.

music streaming service anywhere in your house with one easy-to-use

You can also configure the unit’s wireless settings at once.

application. For more details and a lineup of MusicCast compatible

Y

V-AUX AV

1

2

3

4

5

6

AUDIO

TUNER

BLUETOOTH

USB

NET

PHONO

PARTY

HDMI OUT

MAIN

ZONE 2

products, visit the Yamaha website. dedicated application “MusicCast CONTROLLER”.

SCENE BD DVD

TV

The SSID and security key for your network will be needed.

• Seamlessly control all MusicCast compatible devices with the

NET

RADIO

• Link a MusicCast compatible device to another device in a different room and play them back simultaneously.

PROGRAM MUTE

VOLUME

1 2

• Play back music from music streaming services. (The compatible music TOP MENU

POP-UP/MENU

ON SCREEN

Press z (receiver power) to turn on the unit. Tap the “MusicCast CONTROLLER” application icon on your mobile device and tap “Setup”.

streaming services may differ depending on your region and product.)

X

OPTION

If you have already connected other MusicCast compatible devices to the

MusicCast CONTROLLER

ENTER

RETURN

network, tap “Settings” and then “Add New Device”.

3

DISPLAY

BAND MODE

TUNING

following the on screen instructions, then hold down CONNECT on the front of the unit for 5 seconds.

PRESET


MUSIC

INFO

SLEEP

1

2

3

4

5

6

7

8

9

0

MEMORY

ENT

Operate the “MusicCast CONTROLLER” application


To use the network features on the MusicCast compatible device, you need the dedicated application “MusicCast CONTROLLER” for the operation. Search for the free application “MusicCast CONTROLLER” on CONNECT

the App Store or Google Play and install it to your device.

4

Operate the “MusicCast CONTROLLER” application following the onscreen instructions to set up the network.

5

Operate the “MusicCast CONTROLLER” application to playback.

Y • AirPlay and DSD audio cannot be delivered. • When the Pure Direct mode is enabled, input sources other than the network sources and USB cannot be delivered. • If you configure the unit’s wireless settings with this method, the signal strength indicator of the front display lights up when the unit is connecting to a network (even if a wired connection is used). En

61

PLAYBACK Basic playback procedure Input selection keys

1

Turn on the external devices (such as a TV or BD/DVD player) connected to the unit.

a Press ON SCREEN.

HDMI OUT MUTE

VOLUME

2 3

On-screen input selection

Use the Input selection keys to select an input source.

b Use the Cursor keys to select “Input” and press ENTER. c Use the Cursor keys to select the desired input source and press

Start playback on the external device or select a radio

ENTER.

station. ON SCREEN

Refer to the instruction manual for the external device.

Selecting an HDMI output jack

For details on the following operations, see the corresponding Cursor keys ENTER

pages.

1

• Listening to FM/AM radio (p.70)

Press HDMI OUT to select an HDMI OUT jack. Each time you press the key, the HDMI OUT jack to be used for

• Playing back music via Bluetooth (p.74)

signal output changes.

• Playing back music stored on a USB storage device (p.76) • Playing back music stored on media servers (PCs/NAS) (p.79)

VOL.

HDMI OUT 1

• Listening to Internet radio (p.83) • Playing back iTunes/iPod music with AirPlay (p.86)

4

(RX-V781 only) HDMI OUT 1+2

Press VOLUME to adjust the volume.

X

HDMI OUT 1

• To mute the audio output, press MUTE. Press MUTE again to unmute. • To adjust the treble/bass settings, use the “Option” menu or TONE CONTROL

HDMI OUT 2

on the front (p.98).

HDMI OUT Off

Outputs the same signal at both the HDMI OUT 1 and HDMI OUT 2 jacks. Output the signals at the HDMI OUT 1 (RX-V781) or HDMI OUT (RX-V681) jack. (RX-V781 only) Output the signals at the HDMI OUT 2 jack. Does not output the signals at the HDMI OUT jacks.

X (RX-V781 only) – You can also select an HDMI output jack by selecting a scene (p.63). – When “HDMI OUT 1+2” is selected, the unit outputs video signals at the highest resolution ed by both TVs (or projectors) connected to the unit. (For example, if you have connected a 1080p TV to the HDMI OUT 1 jack and a 720p TV to the HDMI OUT 2 jack, the unit outputs 720p video signals.)

En

62

Selecting the input source and favorite settings with one touch (SCENE) The SCENE function allows you to select the assigned input source,

ing a scene

sound program, Compressed Music Enhancer on/off, and HDMI output jack (RX-V781 only) with just one touch.

1

1

Perform the following operations to prepare the settings

Press SCENE.

you want to assign to a scene.

The input source and settings ed to the corresponding

• Select an input source (p.62)

scene are selected. The unit turns on automatically when it is in

• Select a sound program (p.64) or straight decode mode (p.68)

standby mode.

• Enable/disable Compressed Music Enhancer (p.69)

SCENE

By default, the following settings are ed for each scene.

• (RX-V781 only) Selecting an HDMI output jack (p.62)

BD DVD

SCENE Input

HDMI 1

TV

AV 4

NET RADIO

TUNER

MUSIC

MUSIC

(7ch Stereo)

(7ch Stereo)

On

On

On

HDMI OUT 1+2

HDMI OUT 1+2

HDMI OUT 1+2

Sound program MOVIE (Sci-Fi) STRAIGHT Compressed Off Music Enhancer HDMI output jack (RX-V781 only)

HDMI OUT 1+2

RADIO

NET

2

Hold down the desired SCENE key until “SET Complete” appears on the front display.

SCENE1

VOL.

SET Complete X • You can also configure scene assignments in the “Scene” menu (p.103). • The SCENE link playback function allows you to start playback of an external device connected to the unit via HDMI. To enable SCENE link playback, specify the device type in “Device Control” (p.104) in the “Scene” menu.

En

63

Selecting the sound mode The unit is equipped with a variety of sound programs and surround On-screen sound program/surround decoder selection

decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback).

a Press ON SCREEN.

Selecting a sound program suitable for movies

b Use the Cursor keys to select “DSP Program” and press ENTER.

• Press MOVIE repeatedly.

c Use the Cursor keys to select a sound program/surround decoder

This mode lets you enjoy sound field effects optimized for viewing video sources, such as movies, TV programs, and games (p.65).

and press ENTER.

X • You can also switch the sound programs and surround decoder by pressing

Selecting a sound program suitable for music or stereo playback PROGRAM

ON SCREEN

• Press MUSIC repeatedly.

PROGRAM. • You can change the settings of the surround programs and surround decoders in the

This mode lets you enjoy sound field effects optimized for listening

“DSP Program” menu (p.105). • The sound mode can be applied separately to each input source.

music sources or stereo playback (p.66).

• You can check which speakers are currently outputting sound by looking at the Cursor keys ENTER

Selecting a surround decoder

speaker indicators on the unit’s front (p.12) or at the “Audio Signal” screen in the “Information” menu (p.126).

• Press SUR. DECODE repeatedly. This mode lets you enjoy unprocessed multichannel playback from MOVIE MUSIC SUR.DECODE STRAIGHT ENHANCER PURE DIRECT

2-channel sources (p.68).

About Dolby Atmos® • Dolby Atmos contents are decoded as Dolby TrueHD or Dolby Digital Plus in the following situations. (Dolby Atmos PCM format is always decoded as Dolby Atmos.)

Switching to the straight decode mode

– Any of CINEMA DSP programs is selected.

• Press STRAIGHT.

– Neither surround back nor presence speakers are used.

This mode lets you enjoy unprocessed sounds in original channels (p.68).

– Headphones are used (2-channel playback). • When the Dolby Atmos decoder is working, virtual surround processing (such as Virtual CINEMA FRONT) (p.65), YPAO Volume (p.98) or Compressed Music Enhancer (p.69) does not work.

Switching to the Pure Direct mode • Press PURE DIRECT. This mode lets you enjoy pure high fidelity sound by reducing the

About DTS:X™

electrical noise from other circuitry (p.69).

• DTS:X contents are decoded as DTS-HD format when any of CINEMA DSP programs is selected. • When the DTS:X decoder is working, virtual surround processing (such as Virtual CINEMA FRONT) (p.65), YPAO Volume (p.98), Dialogue Level (p.98), Extra Bass (p.99) or Compressed Music Enhancer (p.69) does not work.

Enabling Compressed Music Enhancer • Press ENHANCER. This mode lets you enjoy compressed music with additional depth and breadth (p.69).

En

64

• When DTS:X contents are played back, you can adjust the volume of dialogue sounds in “DTS Dialogue Control” (p.98) in the “Option” menu.

⬛ Sound programs suitable for movies (MOVIE)

Enjoying stereoscopic sound fields (CINEMA DSP 3D)

The following sound programs are optimized for viewing video sources, such as movies, TV programs, and games. The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP

MOVIE THEATER

technology (CINEMA DSP 3D). It allows you to easily create sound fields like actual movie theaters or concert halls in your room and enjoy natural stereoscopic sound fields. Sound program category

Standard

This program creates a sound field that emphasizes the surround feeling without disturbing the original acoustic positioning of multichannel audio, such as Dolby Digital and DTS. Its design is based on the concept of the ideal movie theater, in which the audience is surrounded by beautiful reverberations from the left, right, and rear.

Spectacle

This program delivers the scale and grandeur of spectacular movie productions. It delivers an expansive sound space to match the cinemascope wide-screen, and boasts a broad dynamic range, providing everything from small delicate sounds to powerful loud booms.

Sci-Fi

This program clearly reproduces the finely elaborated sound design of the latest Sci-Fi and SFX movies. You can enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between dialogue, sound effects, and background music.

Adventure

This program is ideal for reproducing the sound design of action and adventure movies precisely. The sound field restrains reverberations, but puts emphasis on reproducing a sensation of expansiveness on both sides, powerful space expanded widely to the left and right. The restrained depth creates a clear and powerful space, while also maintaining the articulation of the sounds and the separation of the channels.

Drama

This program features stable reverberations that match a wide range of movie genres, from serious dramas to musicals and comedies. The reverberations are modest, but suitably stereophonic. The sound effects and background music are reproduced with a gentle echo that does not impinge on the articulation of the dialogue. You’ll never get tired listening for long periods.

Mono Movie

This program reproduces monaural video sources, such as classic movies, in an atmosphere of a good old movie theater. The program creates a pleasant space with depth, by adding breadth and the appropriate reverberation to the original audio.

“CINEMA DSP” lights up

MUSIC

VOL.

Hall in Vienna

VIRTUAL

Sound program

X • To use the conventional CINEMA DSP, set “CINEMA DSP 3D Mode” (p.115) in the “Setup” menu to “Off”. • We recommend using presence speakers in order to experience the full effect of the stereoscopic sound fields. However, even when no presence speakers are connected, the unit creates Virtual Presence Speaker (VPS) using the front, center, and surround speakers to produce stereoscopic sound fields. • If a multichannel source (6.1 channels or more) is input when no surround back speakers are connected, the unit creates Virtual Surround Back Speaker (VSBS) using the surround speakers to add a sense of depth to the rear sound field. • When VPS or VSBS is working, “VIRTUAL” lights up in the front display.

En

65

⬛ Sound programs suitable for music/stereo playback (MUSIC)

ENTERTAINMENT

Sports

This program allows listeners to enjoy the rich vividness of sport broadcasts and light entertainment programs. In sports broadcasts, the commentators’ voices are positioned clearly at the center, while the atmosphere inside the stadium is realistically conveyed by the peripheral delivery of the sounds of the fans in a suitable space.

Action Game

This program is suitable for action games, such as car racing and fighting games. The reality of, and emphasis on, various effects makes the player feel like they are right in the middle of the action, allowing for greater concentration. Use this program in combination with Compressed Music Enhancer for a more dynamic and strong sound field.

Roleplaying Game

This program is suitable for role-playing and adventure games. This program adds depth to the sound field for natural and realistic reproduction of background music, special effects, and dialogue from a wide variety of scenes. Use this program in combination with Compressed Music Enhancer for a clearer and more spatial sound field.

Music Video

This program allows you to enjoy videos of pop, rock, and jazz concerts, as if you were there yourself. Immerse yourself in the hot concert atmosphere thanks to the vividness of the singers and solos on stage, a presence sound field that emphasizes the beat of rhythm instruments, and a surround sound field that reproduces the space of a big live hall.

The following sound programs are optimized for listening to music sources. You can also select stereo playback.

CLASSICAL

Hall in Munich

This program simulates a Munich concert hall with approximately 2,500 seats that uses stylish wood for the interior finishing. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena.

Hall in Vienna

This program simulates a 1,700-seat, middle-sized concert hall with a shoebox shape that is traditional in Vienna. Pillars and ornate carvings create extremely complex reverberations from all around the audience, producing a very full, rich sound.

Chamber

This program creates a relatively wide space with a high ceiling, like an audience hall in a palace. It offers pleasant reverberations that are suitable for courtly music and chamber music.

LIVE/CLUB Cellar Club

This program simulates an intimate concert venue with a low ceiling and homey atmosphere. A realistic, live sound field delivers powerful sounds that make you feel as if you are sitting in the front row in front of a small stage.

The Roxy Theatre

This program creates the sound field of a 460-seat rock music concert venue in Los Angeles. The listener’s virtual seat is at the center left of the hall.

The Bottom Line

This program creates the sound field at stage front in The Bottom Line, a famous New York jazz club once. The floor can seat 300 people to the left and right in a sound field offering real and vibrant sound.

STEREO 2ch Stereo

Use this program to mix down multichannel sources to 2 channels. When multichannel signals are input, they are down mixed to 2 channels and output from the front speakers (this program does not utilize CINEMA DSP).

7ch Stereo

Use this program to output sound from all speakers. When you play back multichannel sources, the unit mixes down the source to 2 channels, and then outputs the sound from all speakers. This program creates a larger sound field and is ideal for background music at parties.

Y CINEMA DSP 3D (p.65) and Virtual CINEMA DSP (p.67) do not work when “2ch Stereo” or “7ch Stereo” is selected.

En

66

⬛ Enjoying sound field effects without surround speakers (Virtual CINEMA DSP) If you select one of the sound programs (except 2ch Stereo and 7ch Stereo) when no surround speakers are connected, the unit utilizes Yamaha’s original virtual surround technology to reproduce up to 7-channel surround sound and enable you to enjoy the well-oriented sound field only with the front-side speakers. We recommend using presence speakers in order to enjoy more effective stereoscopic sound field.

X When Virtual CINEMA DSP is working, “VIRTUAL” lights up in the front display.

⬛ Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT) If you have surround speakers but there is no space to place them in the rear of your room, you can place them in the front (p.21) and enjoy multichannel surround sound using Virtual CINEMA FRONT. When “Layout (Surround)” (p.112) in the “Setup” menu is set to “Front”, the unit creates the virtual surround speakers in the rear side to allow you to enjoy multichannel surround sound with the 5 speakers placed in the front.

X When Virtual CINEMA FRONT is working, “VIRTUAL” lights up in the front display.

⬛ Enjoying surround sound with headphones (SILENT CINEMA)

You can enjoy surround or sound field effects, like a multichannel speaker system, with stereo headphones by connecting the headphones to the PHONES jack and selecting a sound program or a surround decoder.

En

67

Enjoying unprocessed playback You can play back input sources without any sound field effect processing.

⬛ Playing back in extended multichannel (surround decoder) The surround decoder enables unprocessed multichannel playback from 2-channel or multichannel sources.

⬛ Playing back in original channels (straight decode) When the straight decode mode is enabled, the unit produces stereo

Y • Speakers that produce sounds will change depending on your speaker system and the selected decode type (p.106). • For details on each decoder, see “Glossary” (p.142).

sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources.

1

1

Press SUR. DECODE to select a surround decoder. Each time you press the key, the surround decoder changes.

Press STRAIGHT.

SUR.DECODE

Each time you press the key, the straight decode mode is enabled

†‡Surround

or disabled.

bSurround

Use the Dolby Surround decoder suitable for all sources. A real acoustic space (including overhead) will be created especially when object-based audio (such as Dolby Atmos content) is played.

Neural:X

Use the DTS Neural:X decoder suitable for all sources. A real acoustic space (including overhead) will be created especially when object-based audio (such as DTS:X content) is played.

Neo:6 Cinema

Uses the DTS Neo:6 decoder (or DTS-ES Matrix decoder) suitable for movies. Sounds will be output from the surround/surround back speakers.

Neo:6 Music

Uses the DTS Neo:6 decoder (or DTS-ES Matrix decoder) suitable for music. Sounds will be output from the surround/surround back speakers.

VOL.

STRAIGHT Y SUR.DECODE

• To enable 6.1/7.1-channel playback from 5.1-channel sources when surround back speakers are used, select a surround decoder (p.68).

STRAIGHT

VOL.

• If “Layout (Surround)” (p.112) in the “Setup” menu is set to “Front”, Virtual CINEMA FRONT (p.67) works when multichannel source is played back.

Y • When the Dolby Surround decoder is selected, virtual surround processing (such as Virtual CINEMA FRONT) (p.68), YPAO Volume (p.98) or Compressed Music Enhancer (p.69) does not work. • If the Dolby Surround decoder is selected when only one surround back speaker is used, no sound is output from the surround back speaker (except when a Dolby Atmos content is played). • When the Neural:X decoder is selected, virtual surround processing (such as Virtual CINEMA FRONT) (p.65), YPAO Volume (p.98), Dialogue Level (p.98), Extra Bass (p.99) or Compressed Music Enhancer (p.69) does not work.

En

68

Enjoying pure high fidelity sound (Pure Direct) When the Pure Direct mode is enabled, the unit plays back the selected

Playing back digitally compressed formats (such as MP3, etc.) with enriched sound (Compressed Music Enhancer)

source with the least circuitry in order to reduce the electrical noise from other circuitry (such as the front display). It allows you to enjoy Hi-Fi sound quality.

1

Compressed Music Enhancer adds depth and breadth to the sound, allowing you to enjoy a dynamic sound close to the original sound before

Press PURE DIRECT.

it was compressed. This function can be used along with any other sound

Each time you press the key, the Pure Direct mode is enabled or

modes.

disabled.

1

VOL.

PURE DIRECT

Press ENHANCER. Each time you press the key, Compressed Music Enhancer is enabled or disabled.

Y

“ENHANCER” lights up

When the Pure Direct mode is enabled, the following functions are not available. – Some settings for the speakers or sound programs

ENHANCER

VOL.

– Operating the on-screen menu and some items in the “Option” menu

Enhancer On

– Using the multi-zone function – Viewing information on the front display (when not in operation)

Y Compressed Music Enhancer does not work on signals whose sampling rate is over 48

PURE DIRECT

kHz.

ENHANCER

X You can also use “Enhancer” (p.99) in the “Option” menu to enable/disable Compressed Music Enhancer.

En

69

Listening to FM/AM radio You can tune into a radio station by specifying its frequency or selecting 1

2

3

4

5

Y

V-AUX AV

1

2

3

5

6

AUDIO

TUNER

BLUETOOTH

USB

NET

PHONO

PARTY

HDMI OUT

MAIN

ZONE 2

• The radio frequencies differ depending on the country or region where the unit is

4

TUNER

TV

TOP MENU

1 2

FM 87.50MHz

Setting the frequency steps

3

about a second to search stations automatically.

At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz

OPTION

Numeric keys: Enter a frequency directly. For example, to select

for AM. Depending on your country or region, set the frequency steps to

98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).

ENTER

100 kHz for FM and 10 kHz for AM.

STEREO TUNED

DISPLAY

BAND

BAND

MODE

TUNING

PRESET

TUNING SUR. DECODE STRAIGHT MOVIE

MUSIC

INFO

SLEEP

1

2

5

6

7

8

9

0

MEMORY

ENT


3

Use the following keys to set a frequency. TUNING: Increase/decrease the frequency. Hold down the key for

(Taiwan, Brazil, Asia and General models only)

POP-UP/MENU

RETURN

Press BAND to select a band (FM or AM). VOL.

RADIO

VOLUME

ON SCREEN

Press TUNER to select “TUNER” as the input source.

• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM antennas.

NET

PROGRAM MUTE

being used. The explanation of this section uses a display with frequencies used in U.K. and Europe models.

SCENE BD DVD

Selecting a frequency for reception

from ed radio stations.

HDMI

1 2

4

VOL.

Set the unit to standby mode.

FM 98.50MHz

When holding down STRAIGHT on the front , press

“TUNED” lights up when a signal is received from a radio station.

MAIN ZONE z.

“STEREO” also lights up when a stereo signal is received.

Y

MAIN ZONE z

Numeric keys ENT

“Wrong Station!” appears when you enter a frequency that is out of reception range.

X You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM radio reception in “FM Mode” (p.100) in the “Option” menu. When the signal reception for an

PROGRAM

3

FM radio station is unstable, switching to monaural may improve it.

STRAIGHT

Press PROGRAM repeatedly to select “TU”.

67ÕÕÕÕ(/#/

4 5

Press STRAIGHT to select “FM100/AM10”. Press MAIN ZONE z to set the unit to standby mode and turn it on again. En

70

ing favorite radio stations (presets) You can up to 40 radio stations as presets. Once you have ed stations, you can easily tune into them by selecting their preset numbers. TUNER

⬛ Selecting a preset station Tune into a ed radio station by selecting its preset number.

1 2

Press TUNER to select “TUNER” as the input source. Press PRESET repeatedly to select the desired radio

X

station.

You can automatically FM radio stations that have strong signals by using

You can also enter a preset number (01 to 40) directly by using the

“Auto Preset” (p.73).

Numeric keys after pressing PRESET once.

PRESET

⬛ ing a radio station

VOL.

01:FM 98.50MHz

Select a radio station manually and it to a preset number.

1

STEREO TUNED

Y Follow “Selecting a frequency for reception” (p.70) to

• “No Presets” appears when no radio stations are ed.

tune into the desired radio station.

• “Wrong Num.” appears when an invalid number is entered. • “Empty” appears when a preset number not in use is entered.

2 PRESET

Hold down MEMORY for seconds.

X

The first time that you do a station, the selected radio

To clear preset stations, use “Clear Preset” or “Clear All Preset” (p.73).

station will be ed to the preset number “01”. Thereafter, each radio station you select will be ed to the next empty (unused) preset number after the most recently ed number.

Numeric keys MEMORY

MEMORY

STEREO TUNED

VOL.

01:FM 98.50MHz Preset number

X To select a preset number for ing, press MEMORY once after tuning into the desired radio station, press PRESET to select a preset number, and then press MEMORY again.

FM 985O

STEREO TUNED

VOL.

02:Empty “Empty” (not in use) or the frequency currently ed

En

71

Radio Data System tuning (U.K. and Europe models only)

1

Tune into the desired Radio Data System broadcasting station.

X


We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations (p.73).

When “TUNER” is selected as the input source, the unit automatically receives traffic information. To enable this function, follow the procedure below to set the traffic information station.

1

When “TUNER” is selected as the input source, press

2

Use the Cursor keys to select “Traffic Program” (Traffirogram) and press ENTER. The traffic information station search will start in 5 seconds. Press

Press INFO. Each time you press the key, the displayed item changes.

INFO

⬛ Receiving traffic information automatically

OPTION.

OPTION

2

Frequency

displayed if the radio station does not provide the Radio Data System service.

data, such as “Program Service”, “Program Type,” “Radio Text” and

⬛ Displaying the Radio Data System information

Frequency

“Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not

many countries. The unit can receive various types of Radio Data System

station.

Decoder name

Y

Radio Data System is a data transmission system used by FM stations in

“Clock Time”, when it is tuned into a Radio Data System broadcasting

Audio Decoder

INFO

STEREO TUNED

ENTER again to start the search immediately.

X • To search upward/downward from the current frequency, press the Cursor

VOL.

Program Type

keys (q/w) while “READY” is displayed. • To cancel the search, press RETURN.

Item name • Texts in parentheses denote indicators on the front display.

About 3 seconds later, the corresponding information for the

The following screen appears for about 3 seconds when the search

displayed item appears.

finishes.

FM 9850

STEREO TUNED

FINISH

VOL.

CLASSICS

STEREO TUNED

VOL.

TP FM101.30MHz

Information

Traffic information station (frequency)

Program Service

Program service name

Y

Program Type

Current program type

“TP Not Found” appears for about 3 seconds when no traffic information

Radio Text

Information on the current program

Clock Time

Current time

DSP Program

Sound mode name En

72

stations are found.

⬛ Browse screen

Operating the radio on the TV You can view the radio information or select a radio station on the TV.

1

a

Press TUNER to select “TUNER” as the input source.

c

The playback screen is displayed on the TV. TUNER

⬛ Playback screen

b b

a

a Preset station list Displays the list of preset stations. Use the Cursor keys to select a preset station and press ENTER to tune into it.

c

b Preset number c Operation menu Press the Cursor key (r) and then use the Cursor key (q/w) to select an item. Press ENTER to confirm the selection.

Menu operation keys Cursor keys ENTER

a Radio station information

Menu

Displays the information of the selected radio station such as the selected band (FM/AM) and frequency.

Submenu Memory Auto Preset

Automatically s FM radio stations with strong signals (up to 40 stations).

Clear Preset

Clear the preset station selected in the list.

Clear All Preset

Clear all the preset stations.

(U.K. and Europe models only) When tuning into a Radio Data System broadcasting station (p.72), the Radio Data System information (“Program Service”, “Program Type,” “Radio Text” and “Clock Time”) is also displayed.

Utility

b TUNED/STEREO indicators “TUNED” lights up when a signal is received from a radio station. 1 Page Up

“STEREO” lights up when a stereo signal is received.

c Operation menu Press the Cursor key (r) and then use the Cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Menu

Function

Browse

Moves to the browse screen (preset station list).

Screen Off

Closes the screen display and shows the background. Press one of the Menu operation keys to redisplay it.

Function s the current station to the preset number selected in the list.

1 Page Down

Moves to the previous/next page of the list.

Now Playing

Moves to the playback screen.

Screen Off


Y (U.K. and Europe models only) Only Radio Data System broadcasting stations are stored automatically by “Auto Preset”.

En

73

Playing back music via Bluetooth You can play back music files stored on a Bluetooth device (such as smartphones) on the unit. Also, you can enjoy audio played back on the unit using Bluetooth speakers/headphones.

Playing back Bluetooth device music on the unit Follow the procedure below to establish a Bluetooth connection between a Bluetooth device (such as smartphones) and the unit, and play back music stored the Bluetooth device on the unit.

BLUETOOTH

The unit

Bluetooth device (such as smartphones)

Y The unit does not video playback via Bluetooth.

1

Press BLUETOOTH to select “Bluetooth” as the input source.

2

The unit

the unit) from the available device list. Bluetooth speakers/ headphones


On the Bluetooth device, select the unit (network name of A connection between the Bluetooth device and the unit will be made.

Y

If the key is required, enter the number “0000”.

• To use the Bluetooth function, set “Bluetooth” (p.121) in the “Setup” menu to “On”. • You cannot make Bluetooth connections to a Bluetooth device (such as smartphones) and Bluetooth speakers/headphones at the same time.

3

On the Bluetooth device, select a song and start playback. The playback screen (artist name, album name and song title) is

X

displayed on the TV.

For details on ed Bluetooth devices, see “ed devices and file formats” (p.145).

X • If the unit detects the Bluetooth device previously connected, the unit automatically connects to the Bluetooth device after Step 1. To establish another Bluetooth connection, first terminate the current Bluetooth connection. • To terminate the Bluetooth connection, perform one of the following operations. – Perform the disconnect operation on the Bluetooth device. – Select an input source other than “Bluetooth” on the unit. – Select “Disconnect” in “Audio Receive” (p.109) in the “Setup” menu. • You can use the External device operation keys (a, s, d, f, g) on the remote control to control playback.

En

74

X

Enjoying audio using Bluetooth speakers/headphones Follow the procedure below to establish a Bluetooth connection

HDMI 1

2

3

4

5

2

3

4

5

6

AUDIO

TUNER

BLUETOOTH

USB

NET

PHONO

PARTY

HDMI OUT

MAIN

ZONE 2

Input selection keys

TV

NET

While the Bluetooth speakers/headphones are in the pairing mode, use the Cursor keys to select “CONNECT” and press ENTER.

played back on the unit using Bluetooth speakers/headphones.

Y To use this function, set “Transmitter” (p.121) in the “Setup” menu to “On”.

1

SCENE BD DVD

5

between Bluetooth speakers/headphones and the unit, and enjoy audio

V-AUX AV

1

The checkmark indicates the Bluetooth device currently selected.

RADIO

Use the Input selection keys (except BLUETOOTH) to select an input source.

PROGRAM MUTE

TOP MENU

VOLUME

POP-UP/MENU

ON SCREEN

ON SCREEN

OPTION

2 3

Cursor keys ENTER

ENTER

RETURN

DISPLAY

INFO

SLEEP

1

2

5

6

7

8

9

0

MEMORY

ENT

speakers/headphones.

6


X

SUR. DECODE STRAIGHT MUSIC

unit will be reproduced from the Bluetooth

“Bluetooth” ➞ “Audio Send” ➞ “Device Search” and “OK”.

PRESET

MOVIE

When the connection process finishes, audio played back on the

Use the Cursor keys and ENTER to select “Setup” ➞

The list of available Bluetooth devices (BD addresses) is displayed.

BAND MODE

TUNING

Press ON SCREEN.

To terminate the Bluetooth connection, perform the disconnect operation on the


Bluetooth speakers/headphones. 3

4

Y • AirPlay and DSD audio cannot be delivered. • When the Pure Direct mode is enabled, input sources other than the network sources and USB cannot be delivered.

4

Use the Cursor keys and ENTER to check the desired Bluetooth speakers/headphones.

En

75

Playing back music stored on a USB storage device You can play back music files stored on a USB storage device on the unit.

Playback of USB storage device contents

The unit s USB mass storage class devices (FAT16 or FAT32 format).

Follow the procedure below to operate the USB storage device contents

X

and start playback.

For details on playable file formats, see “ed devices and file formats” (p.145).

You can control the USB memory device with the menu displayed on the TV screen.

USB

Connecting a USB storage device

1

Press USB to select “USB” as the input source. The browse screen is displayed on the TV.

1

Connect the USB storage device to the USB jack. The unit (front) RADIO

STRAIGHT

(CONNECT)

VIDEO AUX

HDMI IN

USB

5V

1A

X If playback is ongoing on your USB storage device, the playback screen is displayed.

USB storage device

USB

VOL.

Connected

X If the USB storage device contains many files, it may take time to load the them. In this case, “Loading...” appears in the front display.

Y • Stop playback of the USB storage device before disconnect it from the USB jack. • Connect a USB storage device directly to the USB jack of the unit. Do not use extension cables.

En

76

2

Use the Cursor keys to select an item and press ENTER. If a song is selected, playback starts and the playback screen is displayed.

⬛ Browse screen a b c e d a Status indicators Display the current shuffle/repeat settings (p.78) and playback status (such as play/pause).

X

b List name

• To return to the previous screen, press RETURN.

c Contents list

• Files not ed by the unit cannot be selected. • If the unit detects a series of uned files (such as images and hidden Menu operation keys Cursor keys ENTER RETURN

Displays the list of USB storage device contents. Use the Cursor keys to select an item and press ENTER to confirm the selection.

d Item number/total

files) during playback, playback stops automatically.

e Operation menu Press the Cursor key (r) and then use the Cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Menu

Function

1 Page Up Moves to the previous/next page of the list. 1 Page Down 10 Pages Up Moves 10 pages forward/backward. 10 Pages Down

En

77

Return

Returns to the higher-level list.

Now Playing


Screen Off


⬛ Playback screen

⬛ Shuffle/repeat settings You can configure the shuffle/repeat settings for playback of USB storage

a b

device contents.

c

1

When “USB” is selected as the input source, press OPTION.

2

Use the Cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER.

a Status indicators

X

Display the current shuffle/repeat settings (p.78) and playback status (such as play/pause).

• To return to the previous screen during menu operations, press RETURN.

b Playback information

• Texts in parentheses denote indicators on the front display.

Displays the artist name, album name, song title, and elapsed time.

3

Use the Cursor keys to select scrollable information. OPTION Menu operation keys Cursor keys ENTER RETURN External device operation keys

c Operation menu Press the Cursor key (r) and then use the Cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Menu

Use the Cursor keys (e/r) to select a setting. Item

Shuffle (Shuffle)

Function

Browse

Moves to the browse screen.

Screen Off


Setting

Function

Off (Off)

Turns off the shuffle function.

On (On)

Plays back songs in the current album (folder) in random order. “x” appears on the TV screen.

X You can use the External device operation keys (a, s, d, f, g) on the remote

Off (Off)

Repeat (Repeat)

control to control playback.

One (One)

All (All)

Turns off the repeat function. Plays back the current song repeatedly. “c” appears on the TV screen. Plays back all songs in the current album (folder) repeatedly. “v” appears on the TV screen.

4

En

78

To exit from the menu, press OPTION.

Playing back music stored on media servers (PCs/NAS) You can play back music files stored on your PC or DLNA-compatible NAS on the unit.

For Windows Media Player 11

Y

1 2 3 4

• To use this function, the unit and your PC must be connected to the same router (p.40). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.127) in the “Information” menu. • The audio may be interrupted while using the wireless network connection. In this case, use the wired network connection.

X For details on playable file formats, see “ed devices and file formats” (p.145).

Start Windows Media Player 11 on your PC. Select “Library”, then “Media Sharing”. Check the “Share my media to” box, select the unit’s icon, and click “Allow”. Click “OK” to exit.

X

Media sharing setup

For details on media sharing settings, refer to Windows Media Player help.

the media sharing setting on each music server.

⬛ For a PC or a NAS with other DLNA server software installed

⬛ For a PC with Windows Media Player installed

Refer to the instruction manual for the device or software and configure the media sharing

To play back music files stored on your PC or DLNA-compatible NAS, first you need to configure

settings.

The setting procedure may vary depending on the PC and Windows Media Player version (The following procedure is a setup example for Windows Media Player 12 and Windows Media Player 11).

For Windows Media Player 12

1 2 3 4 5

Start Windows Media Player 12 on your PC. Select “Stream”, then “Turn on media streaming”. Click “Turn on media streaming”. Select “Allowed” from the drop-down list next to the unit’s model name. Click “OK” to exit.

En

79

Playback of PC music contents

3

Use the Cursor keys to select an item and press ENTER.

Follow the procedure below to operate the PC music contents and start

If a song is selected, playback starts and the playback screen is

playback.

displayed.

You can control the PC/NAS with the menu displayed on the TV screen.

1

Press NET repeatedly to select “SERVER” as the input source.

NET

The browse screen is displayed on the TV.

X • To return to the previous screen, press RETURN. • Files not ed by the unit cannot be selected. • If the unit detects a series of uned files (such as images and hidden files) during playback, playback stops automatically.


X If playback of a music file selected from the unit is ongoing on your PC, the playback screen is displayed.

2

Use the Cursor keys to select a music server and press ENTER.

En

80

⬛ Browse screen

⬛ Playback screen

a b c

a b

e

c

d a Status indicators

a Status indicators Display the current shuffle/repeat settings (p.82) and playback status (such as play/pause).

b Playback information

b List name

Displays the artist name, album name, song title, and elapsed time.

c Contents list Displays the list of PC content. Use the Cursor keys to select an item and press ENTER to confirm the selection. Menu operation keys Cursor keys ENTER


Use the Cursor keys to select scrollable information.

c Operation menu Press the Cursor key (r) and then use the Cursor keys (q/w) to select an item. Press ENTER to confirm the selection.

d Item number/total e Operation menu Press the Cursor key (r) and then use the Cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Menu

Display the current shuffle/repeat settings (p.82) and playback status (such as play/pause).

Function

Menu Browse


Screen Off


1 Page Up Moves to the previous/next page of the list. 1 Page Down 10 Pages Up

Function

X • You can use the External device operation keys on the remote control to control

Moves 10 pages forward/backward. 10 Pages Down Return


Now Playing


Screen Off


En

playback (some functions may not work depending on the PC/NAS). • You can also use a DLNA-compatible Digital Media Controller (DMC) to control playback. For details, see “DMC Control” (p.103).

81

⬛ Shuffle/repeat settings You can configure the shuffle/repeat settings for the playback of PC music content.

1

When “SERVER” is selected as the input source, press OPTION.

2

Use the Cursor keys to select “Shuffle” (Shuffle) or “Repeat” (Repeat) and press ENTER.

X • To return to the previous screen during menu operations, press RETURN. • Text in parentheses denotes indicators on the front display.

OPTION

3

Use the Cursor keys (e/r) to select a setting. Item


Shuffle (Shuffle)

Setting

Function

Off (Off)

Turns off the shuffle function.

On (On)

Plays back songs in the current album (folder) in random order. “x” appears on the TV screen.

Off (Off)

Repeat (Repeat)

One (One)

All (All)

Turns off the repeat function. Plays back the current song repeatedly. “c” appears on the TV screen. Plays back all songs in the current album (folder) repeatedly. “v” appears on the TV screen.

4


En

82

Listening to Internet radio You can listen to Internet radio stations from all over the world.

Playback of Internet radio

Y • To use this function, the unit must be connected to the Internet (p.40). You can check whether the network parameters (such as the IP address) are properly assigned to

1

source.

the unit in “Network” (p.127) in the “Information” menu. NET

Press NET repeatedly to select “NET RADIO” as the input The browse screen is displayed on the TV.

• You may not be able to receive some Internet radio stations. • The unit uses the vTuner Internet radio station database service. • This service may be discontinued without notice.


2

Use the Cursor keys to select an item and press ENTER. If an Internet radio station is selected, playback starts and the playback screen is displayed.

X To return to the previous screen, press RETURN.

En

83

⬛ Browse screen

⬛ Playback screen

a b c

a b c

e d a Playback indicator

a Playback indicator

b List name

b Playback information Displays the station name, album name, song title, and elapsed time.

c Contents list Displays the list of Internet radio content. Use the Cursor keys to select an item and press ENTER to confirm the selection.

Press the Cursor key (r) and then use the Cursor keys (q/w) to select an item. Press ENTER to confirm the selection.

d Item number/total e Operation menu Menu operation keys Cursor keys ENTER


Use the Cursor keys (q/w) to select scrollable information.

c Operation menu

Press the Cursor key (r) and then use the Cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Menu Bookmark On (Bookmark Off)

Menu Bookmark On

Adds the current station to the “Bookmarks” folder (p.85).

Browse


Screen Off


Function Adds/removes the station selected in the list to/from the “Bookmarks” folder (p.85).

1 Page Up Moves to the previous/next page of the list. 1 Page Down 10 Pages Up

Function

X • You can use the External device operation key (s) on the remote control to stop

Moves 10 pages forward/backward. 10 Pages Down Return


Now Playing


Screen Off


En

playback. • Some information may not be available depending on the station.

84

ing favorite Internet radio stations (bookmarks) By ing your favorite Internet radio stations to “Bookmarks”, you can quickly access to them from the “Bookmarks” folder in the browse

3

Access the vTuner website (http://yradio.vtuner.com/) with the web browser on your PC and enter the vTuner ID.

screen.

You can switch the language.

⬛ ing the station on the browse/playback screen

1

Select the desired Internet radio station in the browse screen or start playback of it to display the playback screen.

2 Cursor keys ENTER

Press the Cursor key (r) to select “Bookmark On” and press ENTER.

Enter the vTuner ID in this area.

The selected station is added to the “Bookmarks” folder.

Y

X

To use this feature, you need to create your personal . Create your using your e-mail address.

To remove stations from the “Bookmarks” folder, select the station in the “Bookmarks” folder and then “Bookmark Off”.

4

⬛ ing the station on the vTuner website

your favorite radio stations. Click the “Add” icon (❤+) next to the station name.

X To remove the station from the “Bookmarks” folder, select “Bookmarks” in the

1

Select any of Internet radio stations on the unit. This operation is necessary to the radio station for the first time.

2

Check the vTuner ID of the unit. You can find the vTuner ID in “Network” (p.127) in the “Information” menu.

En

85

Home screen, and then click the “Remove” icon (❤–) next to the station name.

Playing back iTunes/iPod music with AirPlay Playback of iTunes/iPod music contents

The AirPlay function allows you to play back iTunes/iPod music on the unit via network. iTunes

Follow the procedure below to play back iTunes/iPod music contents on the unit.

PC

(wired or wireless)

1

Router

Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod.

The unit

(wired or wireless)

iPhone/iPad/ iPod touch

If the iTunes/iPod recognizes the unit, the AirPlay icon (

) appears.

iTunes (example)

iPod iOS6 (example)

iPod iOS7/iOS8 (example)

Y

Y

If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.

• To use this function, the unit and your PC or iPod must be connected to the same router. You can check whether

2

the network parameters (such as the IP address) are properly assigned to the unit in “Network” (p.127) in the “Information” menu.

On the iTunes/iPod, click (tap) the AirPlay icon and select the unit (network name of the unit) as the audio output device.

• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to connect.

iTunes (example)

Connect the iPod to the SSID which can access the unit.

iPod (example)

X • This section describes “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod touch”, “iPhone” and “iPad”, unless otherwise specified.

Network name of the unit

• For details on ed iPod devices, see “ed devices and file formats” (p.145). • You can restrict access to the unit using the AirPlay (p.95).

3

Select a song and start playback.

The unit automatically selects “AirPlay” as the input source and starts playback. The playback screen is displayed on the TV.

Y The playback screen is available only when your TV is connected to the unit via HDMI.

En

86

⬛ Playback screen

X • You can turn on the unit automatically when starting playback on iTunes or iPod by

a b

setting “Network Standby” (p.119) in the “Setup” menu to “On”. • You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p.120) in the “Setup” menu.

c

• You can adjust the unit’s volume from the iTunes/iPod during playback. To disable volume controls from iTunes/iPod, set “Volume Interlock” (p.103) in the “Input” menu to “Off”.

Caution When you use iTunes/iPod controls to adjust volume, the volume may be unexpectedly loud. This could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop playback on the iTunes/iPod immediately.

a Playback indicator b Playback information Displays the artist name, album name, song title, and elapsed/remaining time. Use the Cursor keys (q/w) to select scrollable information.

c Operation menu Press the Cursor key (r) to select an item. Press ENTER to confirm the selection. Menu

Menu operation keys Cursor keys ENTER

Screen Off

Function Closes the screen display and shows the background. Press one of the Menu operation keys to redisplay it.

X


You can use the External device operation keys (a, s, d, f, g) on the remote control to control playback.

En

87

Playing back music in multiple rooms (multi-zone) ⬛ Using the unit’s internal amplifier

The multi-zone function allows you to play back different input sources in the room where the unit is installed (Main zone) and in another room (Zone2).

Connect the speakers placed in Zone2 to the unit with speaker cables. For details, see

For example, while you are watching TV in the living room (Main zone), another person can

“Connecting Zone2 speakers” (p.30).

listen to radio in the study room (Zone2).

⬛ Using an external amplifier Connect the external amplifier placed in Zone2 to the unit with a stereo pin cable. The unit (rear) T

HDMI OUT

HDMI 1

HDMI 2

HDMI 3

HD2.2

HD2.2

HD2.2

HD2.2

2

1

(BD/DVD)

ARC

UT

PTICAL

ANTENNA

VIDEO

(RADIO)

FM

(TV) AV4

AM

OAXIAL AV3

Study room (Zone2)

Y

PR

PB

Y

PB

ZONE2 OUT jacks

PR COMPONENT VIDEO

AV2

MONITOR OUT

PTICAL

VIDEO AV 1

VIDEO

COMPONENT VIDEO

SINGLE

L

GND

Living room (Main zone)

R ONO

AUDIO 1

AUDIO 2

ZONE 2

AV 5

AV 6

SUR. BACK

SU

External amplifier Audio input (analog stereo)

ZONE OUT

ZONE 2

Y

ZONE OUT

Analog audio sources (including FM/AM radio), and Bluetooth, USB, and network sources can be output to Zone2. To listen to the playback of an external device in Zone2, you need to connect the device to the AUDIO jacks (AV 5-6

L

or AUDIO 1-2 jacks) of the unit. The party mode (p.91) allows you to play back the same audio output in Main zone

Q

as Zone2, whatever the input audio signal type.

W R

1

9

Preparing Zone2 Connect the device that will be used in Zone2 to the unit. The connection method varies

2

AUDIO

3

4

5

depending on the amplifier being used (the unit or an external amplifier). 6

7

Zone2

Caution • Remove the unit’s power cable from the AC wall outlet before connecting speakers or an external amplifier. Main zone

• Ensure that the bare wires of the speaker cable do not touch one another or come into with the unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit, “Check SP Wires” will appear on the front display when the unit is turned on.

X You can adjust the volume for Zone2 output with the unit. When using an external amplifier with volume control, set “Volume” (p.122) in the “Setup” menu to “Fixed”.

En

88

⬛ Operating the unit from Zone2 (remote connection)

Remote connections between Yamaha products

You can operate the unit or external devices from Zone2 using the remote control supplied

An infrared signal transmitter is not required if you are using Yamaha products that

with each device if you connect an infrared signal receiver/emitter to the unit’s REMOTE

remote connections, as the unit does. You can transmit remote control signals by connecting

IN/OUT jacks.

the REMOTE IN/OUT jacks with monaural mini-jack cables and an infrared signal receiver. REMOTE IN/OUT jacks

REMOTE IN/OUT jacks IN


HDMI OUT HD2.2

IN 2

HDMI 2

HD2.2

HD2.2

OUT

1

IN

OUT

OUT

(BD/DVD)

ARC

OUT

HDMI 1

REMOTE REMOTE

OPTICAL

VIDEO

REMOTE

(RADIO)

AM

Infrared signal receiver

COAXIAL AV3 PR

PB

Y

PB

PR

AV2

MO

OPTICAL

AV 1

Yamaha products (up to six, including the unit)

VIDEO

COMPONENT VIDEO

GND

PHONO

AUDIO 1

REMOTE

ANTENNA FM

(TV) AV4

Y

REMOTE IN/OUT jacks

IN

AUDIO 2

ZONE 2

AV 5

AV 6

ZONE OUT

Remote control The unit (rear) Zone2 Infrared signal transmitter

External device (such as a CD player)

Infrared signal receiver

Remote control (supplied with each device) Zone2

Main zone

En

89

Controlling Zone2 z HDMI 1

2

3

4

5

V-AUX AV

1

2

3

5

6

AUDIO

TUNER

BLUETOOTH

USB

NET

PHONO

PARTY

HDMI OUT

MAIN

ZONE 2

4

AV 5–6 AUDIO TUNER BLUETOOTH USB NET PHONO

1 2

SCENE TV

NET

RADIO

MUTE

Refer to the instruction manual for the external device. For details on the following operations, see the corresponding

Press z (receiver power).

pages.

When Zone2 output is enabled, “ZONE2” lights up in the front display.

3

TOP MENU

VOLUME

VOLUME

POP-UP/MENU

ON SCREEN

OPTION

Use the following keys to select an input source. AUDIO: AUDIO 1-2 jacks (press repeatedly to select “AUDIO1” or

Y • The on-screen operations are not available for Zone2. Use the front display or

zone.

USB: USB jack (on the front ) NET: NETWORK sources (press repeatedly to select a desired

PRESET

network source)


MUSIC

SLEEP

SLEEP

1

2

3

4

5

6

7

8

9

0

MEMORY

ENT

X • To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP repeatedly. The Zone2 output will be disabled after a specified period of time.

ENHANCER PURE DIRECT INFO

web control (p.93) to control Zone2. • AirPlay is available in Zone2 only when AirPlay playback is ongoing in the main

MODE

TUNING

• Playing back iTunes/iPod music with AirPlay (p.86)

TUNER: FM/AM radio

DISPLAY

BAND

• Playing back music stored on media servers (PCs/NAS) (p.79)

“AUDIO2”)

receiver) RETURN

• Playing back music via Bluetooth (p.74)

• Listening to Internet radio (p.83)

BLUETOOTH: Bluetooth connection (the unit as a Bluetooth

ENTER

• Listening to FM/AM radio (p.70)

• Playing back music stored on a USB storage device (p.76)

AV 5-6: AV 5-6 (AUDIO) jacks PROGRAM MUTE

Start playback on the external device or select a radio station.

Set MAIN/ZONE2 to “ZONE2”.

Each time you press the key, Zone2 output is enabled or disabled.

MAIN/ZONE2 BD DVD

4

PHONO: PHONO jacks

• To adjust the Zone2 volume, press VOLUME or MUTE (when using the unit’s

Y

internal amplifier).

You cannot select Bluetooth, USB and network sources exclusively for each zone. For example, if you select “SERVER” for Zone2 when “USB” is selected for the main zone, the input source for the main zone also switches to “SERVER”.

• The Zone2 input automatically switches in conjunction with the input source selected in the main zone when “Main Zone Sync” is selected as the Zone2 input with the web control (p.93) or AV CONTROLLER (p.7). • To play back DSD audio in Zone2, select “Main Zone Sync” as the Zone2 input or use the party mode (p.91).

Caution • To avoid unexpected noise, never play back DTS-CDs in Zone2.

En

90

⬛ Enjoying the same source in multiple rooms (party mode) The party mode allows you to play back in Zone2 the same music that is being played back in the main zone. During the party mode, stereo playback is automatically selected for all zones. Utilize this function when you want to use main zone music as background music for a house party. PARTY

1

Press PARTY. Each time you press the key, the party mode is turned on or off. When the party mode is turned on, “PARTY” lights up in the front display.

Y If the party mode does not work on Zone2, set “Party Mode Set” (p.123) in the “Setup” menu to “Enable” (default).

En

91

ing favorite items (shortcut) You can up to 40 favorite USB and network contents as shortcuts

Recalling a ed item

and access them directly by selecting the shortcut numbers. Recall a ed item by selecting the shortcut number.

X • You can also use the “Bookmark” feature to Internet radio stations. • Only the input source will be ed for Bluetooth and AirPlay. Individual BLUETOOTH USB NET

contents cannot be ed.

1 2

Press BLUETOOTH, NET or USB. Use the Numeric keys to enter a shortcut number (01 to 40).

ing an item

You can also use PRESET on the front to select a shortcut.

Select a desired item and it to a shortcut number.

1 2

Y Press MEMORY.

• “No Presets” appears when no items are ed. • “Empty” appears when a preset number not in use is entered. VOL.

• The ed item cannot be recalled in the following cases.

01:Empty

– A USB storage device which contains the ed item is not connected to this unit.

Shortcut number (flashes)

– A PC which contains the ed item is turned off or not connected to the network.

X To change a shortcut number to which the item will be ed, use Numeric

MEMORY

– The ed network content is temporarily unavailable or out of service. – The ed item (file) has been deleted or moved to another location.

keys to select the shortcut number after step 2.

– A BLUETOOTH connection cannot be established. • When you music files stored on a USB storage device or a PC, this unit

VOL.

02:Empty

memorizes the relative position of the music files in the folder. If you have added or deleted any music files to or from the folder, this unit may not recall the music file correctly. In such cases, the items again.

“Empty” (not in use) or item currently ed

3

VOL.

01:USB

Play back a song or a radio station to be ed.

MEMORY

Numeric keys MEMORY

RECALL

To confirm the registration, press MEMORY.

En

92

Controlling the unit from a web browser (web control) X

You can control the unit with the web control screen displayed in a web browser.

• You can check the IP address of the unit in “Network” (p.127) in the “Information” menu.

Web browser

• You can bookmark the unit’s IP address in the browser or create a shortcut link (p.95) to access the web control screen quickly in the future. However, if you are using a DH server, the IP address of the unit may change each time the unit is turned on.

Web control

Web control

• If you have enabled the MAC address filter (p.120), you need to specify the MAC address of your PC to allow the PC to access the unit. For information on how to check the MAC address of your PC, refer to its instruction

(wired or wireless) PC

manual.

(wired or wireless) Router

The unit

• By using the application for smartphone/tablet “AV CONTROLLER”, you can control the unit from an iPhone,

Y

iPad, iPod touch or Android devices (p.7).

• To use this function, the unit and your PC must be connected to the same router. • Some security software installed on your PC may block the access of the unit to your PC. In these cases, configure the security software appropriately. • To display the web control screen or turn on the unit from the web control when the unit is in standby mode, set “Network Standby” (p.95) to “On”. • We recommend using one of the following web browsers. – Internet Explorer 11.x – Safari 9.x

1 2

Start the web browser. Enter the IP address of the unit in the address bar of the web browser. (Example)

En

93

Top menu screen

Control screen c

a

e

a

f b c d

d

e

g

b

f

a PLAY INFO

a CONTROL

Selects an input source or controls playback for the selected zone.

Moves to the control screen for the selected zone.

b TOP MENU

b STATUS

Moves to the top menu screen.

Turns on/off the power for each zone or displays the input source and volume set for each zone.

c SCENE

c SETTINGS

Selects a scene for the selected zone.

Moves to the settings screen.

d POWER

d PARTY MODE

Turns on/off the power for the selected zone.

Turns on/off the party mode (p.91).

e VOLUME

e SYSTEM POWER

Adjusts the volume or mutes the audio output for the selected zone. You can also select the increments used for volume adjustment.

Turns on/off the power for all zones.

f MAIN VOLUME

f RELOAD

Adjusts the volume or mutes the audio output for the main zone. You can also select the increments used for volume adjustment.

Reloads the current status of the unit.

Y

g RELOAD

Multi-zone volume adjustment is not available when an external amplifier is used.

Reloads the current status of the unit.

En

94

b BACK

Settings screen

Moves to the top menu screen.

c RELOAD Reloads the current status of the unit. Note

a

• If the network settings are changed, you may need to restart the browser or regain access to the unit. • When using the MAC address filter, make sure you specify the MAC addresses of your network devices correctly. Otherwise, the unit will be inaccessible from your network devices such as PCs and other external devices.

b

• Do not operate the unit during the recovery process, as this may result in the incorrect recovery of the settings. When the recovery finishes, click “OK” to set the unit to standby mode.

c

• The backup does not contain information (such as and ) or unit-specific information (such as MAC address and IP address).

a Rename

• Some characters entered with a PC may not appear correctly on the unit.

Edits the network name (the unit’s name on the network) (p.120) or the name of each zone (p.122). Click “APPLY” to apply the changes to the unit.

Network Selects the network connection method (p.119) or configures the network parameters (such as IP address) (p.119). Click “APPLY” to apply the changes to the unit.

AirPlay Sets the to restrict access to the unit via AirPlay (p.86). Click “APPLY” to apply the changes to the unit.

MAC Filter Sets the MAC address filter (p.120) to limit access to the unit from the network devices. Click “APPLY” to apply the changes to the unit.

Auto Reload Enables/disables automatic reloading. When “Auto Reload” is “On” (enabled), the web control screen reloads the status of the unit every 5 seconds.

Network Standby Enables/disables the network standby function (p.119).

Backup/Recovery Creates a backup of the unit’s settings on the PC or restores the settings from the backup.

Firmware Updates the firmware of the unit by using the firmware you have ed on the PC. Follow the on-screen instructions to start the firmware update.

Create Link Creates a shortcut link to the desired control screen.

Tips Displays tips for use of the web control.

Licenses Displays the licenses of the software used in the unit. En

95

Viewing the current status You can view the current status (input or DSP program currently selected) on the front display or TV.

Currently input source

Item

Bluetooth

Switching information on the front display

Song (song title), Artist (artist name), Album (album name), DSP Program (sound mode name), Audio Decoder (decoder name*)

USB SERVER AirPlay

1

Press INFO repeatedly to select between the various display items.

INFO

VOL.

Audio Decoder

NET RADIO

Song (song title), Album (album name), Station (station name), DSP Program (sound mode name), Audio Decoder (decoder name*)

MusicCast

DSP Program (sound mode name), Audio Decoder (decoder name*)

* The name of the audio decoder currently activated is displayed. If no audio decoder is activated, “Decoder Off” appears.

Item name

About 3 seconds after a display item is selected, its corresponding

Viewing the status information on the TV

information appears.

HDMI1

DISPLAY

VOL.

1

†‡Surround

The following information is displayed on the TV.

Information INFO

Press DISPLAY.

Input source/ Party mode status

X Available items vary depending on the selected input source. The displayed item can

Compressed Music Enhancer status

Volume/ YPAO Volume status

CINEMA DSP status

Sound mode

also be applied separately to each input source.

Currently input source

Item

HDMI 1-5 V-AUX AV 1-6

Input (input source name), DSP Program (sound mode name), Audio Decoder (decoder name*)

AUDIO 1-2 PHONO Audio format/ Decoder

Frequency (frequency), DSP Program (sound mode name), Audio Decoder (decoder name*) TUNER

* (U.K. and Europe models only) Radio Data System data is also available when the unit is tuned into a Radio Data System broadcasting station (p.72).

En

96

2

To close the information display, press DISPLAY.

Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. This menu is

Item

available on the front (or on the TV screen), allowing you to easily configure settings during playback.

1

Press OPTION. YPAO Volume (YPAO Volume)

Front display

OPTION

TV screen Dialogue (Dialog)

YPAO Volume (YPAO Vol.)

Enables/disables YPAO Volume.

98

Adaptive DRC (A.DRC)

Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when the volume is adjusted.

98

Dialogue Level (Dialog Lvl)

Adjusts the volume of dialogue sounds.

98

DTS Dialogue Control (DTS Dialog)

Adjusts the volume of dialogue sounds for DTS:X contents.

98

Dialogue Lift (Dialog Lift)

Adjusts the perceived height of dialogue sounds.

99

Adjusts the delay between video and audio output.

99

Lipsync Adjustment (Lipsync Adj.)

2

Subwoofer Trim Fine-adjusts the subwoofer volume. (SW.Trim)

99

Extra Bass (Extra Bass)

Enables/disables Extra Bass.

99

Enhancer (Enhancer)

Enables/disables Compressed Music Enhancer.

99

Video Processing (Video Process.)

Enables/disables the video signal processing settings configured in the “Setup” menu.

100

Input Trim (In.Trim)

Corrects volume differences between input sources.

100

Video Out (V.Out)

Selects a video to be output with the audio input source.

100 100

Subwoofer/Bass (Subwoofer/Bass)

Use the cursor keys to select an item and press ENTER.

X

Page 98

VOL.

Tone Control

Function Adjusts the level of high-frequency range and low-frequency range individually.

Tone Control (Tone Control)

To return to the previous screen during menu operations, press RETURN.

3 4

Use the cursor keys (e/r) to select a setting.

Input Settings (Input Settings)


Option menu items

FM Mode (FM Mode)

Switches between stereo and monaural for FM radio reception.

X

Traffic Program (Traffirogram)

(U.K. and Europe models only)

Shuffle (Shuffle)

Configures the shuffle setting for the USB storage device (p.78) or media server (p.82).

⏤

Repeat (Repeat)

Configures the repeat setting for the USB storage device (p.78) or media server (p.82).

⏤

• Available items vary depending on the selected input source. • Text in parentheses denotes indicators on the front display. • Default settings are underlined.

En

97

Automatically searches for a traffic information station.

72

⬛ Tone Control (Tone Control)

Adaptive DRC (A.DRC)

Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually.

Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when the volume level is adjusted. When it is set to “On”, it is useful for listening to playback at a low

Choices Treble (Treble), Bass (Bass)

volume at night. Settings

Setting range -6.0 dB to 0.0 dB to +6.0 dB, *0.5 dB increments

Y

Off (Off)

The dynamic range is not automatically adjusted.

On (On)

Automatically adjusts the dynamic range when YPAO Volume is enabled.

• When both “Treble” and “Bass” are 0.0 dB, “By” appears.

If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a high

• If you set an extreme value, sounds may not match those from other channels.

volume. Adjusting with the front controls a Press TONE CONTROL to select “Treble” or “Bass”. b Press PROGRAM to make an adjustment.

⬛ YPAO Volume (YPAO Volume)

On Off

Volume: high Output level

Output level

Volume: low

On

Input level

Off Input level

Enables/disables YPAO Volume or Adaptive DRC.

⬛ Dialogue (Dialog)

YPAO Volume (YPAO Vol.)

Adjusts the volume or perceive height of dialogue sounds.

Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and low-frequency levels are automatically adjusted according to the volume so that you can enjoy natural

Dialogue Level (Dialog Lvl)

sounds even at low volume.

Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly, you can

Settings

turn up its volume by increasing this setting.

Off (Off)

Disables YPAO Volume.

On (On)

Enables YPAO Volume.

Setting range 0 to 3

X

X

This setting is not available when DTS:X content is played back, or when the Dolby Surround or Neural:X decoder

• YPAO Volume works effectively after the measurement results of “Auto Setup” have been already saved (p.45).

is working.

• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower volumes or at night.

DTS Dialogue Control (DTS Dialog) Adjusts the volume of dialogue sounds for DTS:X contents. Setting range 0 to 6

X This setting is available only when DTS:X content which s the DTS Dialogue Control feature is played back. En

98

⬛ Subwoofer/Bass (Subwoofer/Bass)

Dialogue Lift (Dialog Lift)

Adjust the subwoofer volume or bass sound.

Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is coming from below the TV screen, you can raise its perceived height by increasing this setting.

Subwoofer Trim (SW.Trim)

X This setting is available only when one of the following conditions is met.

Fine-adjusts the subwoofer volume.

– One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when presence speakers are used.

Setting range -6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)

– Virtual Presence Speaker (VPS) (p.65) is working. (You may hear dialogue sounds from the surround speakers depending on the listening position.)

Extra Bass (Extra Bass)

Setting range 0 to 5 (The bigger the value the higher the position)

Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced bass sounds, regardless of the size of the front speakers and the presence or absence of the subwoofer. Settings Ideal position

Off (Off)

Disables Extra Bass.

On (On)

Enables Extra Bass.

⬛ Enhancer (Enhancer) Enables/disables Compressed Music Enhancer (p.69).

⬛ Lipsync Adjustment (Lipsync Adj.)

X


• This setting is applied separately to each input source.

Setting range 0 ms to 500 ms (1 ms increments)

• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer (p.69).

Settings

X This setting is available only when “Delay Enable” (p.114) in the “Setup” menu is set to “Enable” (default).

Off (Off)

Disables Compressed Music Enhancer.

On (On)

Enables Compressed Music Enhancer.

Default TUNER, Bluetooth, USB, (network sources): On (On) Others: Off (Off)

En

99

⬛ Video Processing (Video Process.)

⬛ FM Mode (FM Mode)

Enables/disables the video signal processing (resolution and aspect ratio) settings configured

Switches between stereo and monaural for FM radio reception.

in “Processing” (p.116) in the “Setup” menu.

Settings

Settings Direct (Direct)

Disables the video signal processing.

Processing (Processing)

Enables the video signal processing.

⬛ Input Settings (Input Settings) Configures the input settings.

X This setting is applied separately to each input source.

Input Trim (In.Trim) Corrects volume differences between input sources. If you are bothered by volume differences when switching between input sources, use this function to correct it. Setting range -6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)

Video Out (V.Out) Selects a video to be output with the audio input source. Settings Off (Off)

Does not output video.

HDMI 1-5 (HDMI1-5), AV 1-6 (AV1-6), V-AUX (V-AUX)

Outputs video input through the corresponding video input jacks.

En

100

Stereo (Stereo)

Receives FM radio in stereo sounds.

Mono (Mono)

Receives FM radio in monaural sounds.

CONFIGURATIONS Configuring input sources (Input menu) You can change the input source settings using the TV screen.

1 2

4

Use the cursor keys (q/w) to select an item and press ENTER.

Press ON SCREEN. Use the cursor keys to select “Input” and press ENTER.

X To return to the previous screen during menu operations, press RETURN.

3

5 6

Use the cursor keys (e/r) to select an input source to be configured and press the cursor key (q).

Use the cursor keys to select a setting and press ENTER. To exit from the menu, press ON SCREEN.

Input menu items

X • Available items vary depending on the selected input source. • Default settings are underlined.

Item

The input source of the unit also changes.

X You can still switch the input source by using cursor keys (e/r) after Step 3.

En

101

Function

Page

Rename/Icon Select

Changes the input source name and icon.

102

Audio In

Combines the video jack of the selected input source with an audio jack of others.

102

Decoder Mode

Sets the format of digital audio playback to DTS.

103

Volume Interlock

Enables/disables volume controls from iTunes/iPod via AirPlay.

103

DMC Control

Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback.

103

⬛ Rename/Icon Select

6

Use the cursor keys to select “OK” and press ENTER.

Changes the input source name and icon displayed on the front display or TV screen.

X

Input sources HDMI 1-5, V-AUX, AV 1-6, AUDIO 1-2, USB, PHONO

To restore the default setting, select “RESET”.

7

⬛ Setup procedure

1

⬛ Audio In

Use the cursor keys (e/r) to select “Auto” or “Manual” and press the cursor key (w). If you select “Auto”, the unit creates a name automatically according to the connected device. Proceed to Step 3.

2


Combines the video jack of the selected input source with an audio jack of others. For example, use this function in the following cases.

X

• Connecting a playback device that s HDMI video output, but not HDMI audio output

This step is available only when “HDMI1-5”, “V-AUX” or “AV 1-4” is selected.

• Connecting a playback device that has component video jacks and analog stereo jacks (such as game consoles)

Use the cursor keys (e/r) to select a template and press the cursor key (w).

Input sources HDMI 1-5, AV 1-2

(To input audio through a digital optical jack) Select “AV1” or “AV4” and connect the device to the unit’s corresponding audio jacks with a digital optical cable.

(To input audio through a digital coaxial jack)

3

Use the cursor keys (e/r) to select an icon and press the cursor key (w).

4

Press ENTER to enter the name edit screen.

5

Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.

Select “AV2” or “AV3” and connect the device to the unit’s corresponding audio jacks with a digital coaxial cable.

(To input audio through analog audio jacks) Select “AV5”, “AV6”, “AUDIO1”, or “AUDIO2”, and connect the device to the unit’s corresponding audio jacks with a stereo pin cable.

X To clear the entry, select “CLEAR”.

En

102

⬛ Decoder Mode

Configuring the SCENE function (Scene menu)

Sets the format of digital audio playback to “DTS”. You can change the settings of the SCENE function (p.63) using the TV screen.

For example, if the unit does not detect DTS audio and outputs noise, set “Decoder Mode” to “DTS”. Input sources HDMI 1-5, V-AUX, AV 1-4 Settings Auto

Automatically selects an audio format to match the input audio signal.

DTS

Selects DTS only. (Other audio signals are not reproduced.)

1 2

Press ON SCREEN.

3

Use the cursor keys (e/r) to select a scene to be configured and press the

Use the cursor keys to select “Scene” and press ENTER.

⬛ Volume Interlock Enables/disables volume controls from iTunes/iPod via AirPlay. Input sources AirPlay Settings

cursor key (q).

Off

Disables volume controls from iTunes/iPod.

Limited

Enables volume controls from iTunes/iPod within the limited range (-80 dB to -20 dB and mute).

Full

Enables volume controls from iTunes/iPod in the full range (-80 dB to +16.5 dB and mute).

⬛ DMC Control Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback.

X

Input source SERVER

You can still switch the scene by using cursor keys (e/r) after Step 3.

Settings Disable

Does not allow DMCs to control playback.

Enable

Allows DMCs to control playback.

X A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on the same network.

En

103

4

⬛ Load


Loads the settings ed for the selected scene. Select “DETAIL” to configure the SCENE link playback setting or view the scene assignments.

Device Control Recalls a selected scene and starts its playback on an external device connected to the unit via HDMI. (SCENE link playback) Settings

5 6

Off

Disables the SCENE link playback function.

HDMI Control

Enables SCENE link playback using HDMI Control signals. Select this if an HDMI Control-compatible device (such as a BD/DVD player) is connected to the unit via HDMI. It also turns on the TV if it s HDMI Control.

Use the cursor keys and ENTER to change the setting. To exit from the menu, press ON SCREEN.

Default SCENE1 (BD/DVD), SCENE2 (TV): HDMI Control

Scene menu items Item

SCENE3 (NET), SCENE4 (RADIO): Off Function

Y

Page

Save

s the current settings in the selected scene.

104

Load

Loads the settings ed for the selected scene. You can also configure the SCENE link playback setting or view the scene assignments.

104

Rename/Icon Select

Changes the scene name and icon.

105

Reset

Restores the default settings for the selected scene.

105

To control playback of an HDMI Control-compatible device by SCENE link playback, you need to set “HDMI Control” in the “Setup” menu to “On” and perform the HDMI Control link setup (p.147).

Detail Displays the assignments of the selected scene. Input HDMI Output

⬛ Save s the unit’s current settings (input source, sound program/surround decoder, Compressed Music Enhancer on/off, and HDMI output jack [RX-V781 only]) in the selected scene.

X If you have changed the input assignment for a scene, you also need to change the external device assigned to the corresponding SCENE key (p.63).

En

104

Input source to be used (RX-V781 only) HDMI OUT jack to be used

Mode

Sound program/surround decoder to be used

Enhancer

Compressed Music Enhancer on/off

⬛ Rename/Icon Select

Configuring sound programs/surround decoders (DSP Program menu)

Changes the scene name and icon displayed on the front display or TV screen. ⬛ Setup procedure

1

2 3

You can change the settings of the sound programs and surround decoders using the TV

Use the cursor keys (e/r) to select an icon and press the cursor key (w).

screen.

1 2

Press ON SCREEN.

3

Use the cursor keys (e/r) to select a sound program to be configured and

Use the cursor keys to select “DSP Program” and press ENTER.

Press ENTER to enter the name edit screen. Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.

press the cursor key (q).

X To clear the entry, select “CLEAR”.

4


X

X

You can still switch the sound program by using cursor keys (e/r) after Step 3.


5


⬛ Reset Restores the default settings (p.63) for the selected scene.

En

105

4

DSP Program menu items


X • Available items vary depending on the selected sound program or surround decoder. • Default settings are underlined.

⬛ Settings for sound programs Item

X • To return to the previous screen during menu operations, press RETURN.

Decode Type

• To restore the default settings for the selected sound program, select “Reset”.

5 6

Function

Selects a surround decoder to be used in combination with the selected sound program.

Settings bSurround*, Neural:X, Neo:6 Cinema, Neo:6 Music* (* Available only when “SURROUND DECODER” is selected)

Use the cursor keys to select a setting and press ENTER.

-6 dB to 0 dB to +3 dB


Higher to enhance the sound field effect, and lower to reduce it.

En

106

DSP Level

Adjusts the sound field effect level.

Initial Delay

Adjusts the delay between the direct sound and presence sound field generation.

Surround Initial Delay

Adjusts the delay between the direct sound and surround sound field generation.

Surround Back Initial Delay

Adjusts the delay between the direct sound and surround back sound field generation.

Room Size

Adjusts the broadening effect of the presence sound field.

Surround Room Size

Adjusts the broadening effect of the surround sound field.

Surround Back Room Size

Adjusts the broadening effect of the surround back sound field.

Liveness

Adjusts the loss of the presence sound field.

Surround Liveness

Adjusts the loss of the surround sound field.

Surround Back Liveness

Adjusts the loss of the surround back sound field.

1 ms to 99 ms Higher to enhance the delay effect, and lower to reduce it.

1 ms to 49 ms Higher to enhance the delay effect, and lower to reduce it.

0.1 to 2.0 Higher to enhance the broadening effect, and lower to reduce it.

0 to 10 Higher to enhance the reflectivity, and lower to reduce it.

Item

Function

Adjust the decay time of the rear reverberant sound.

Reverb Time

⬛ Settings for decoders

Settings 1.0 s to 5.0 s

The following items are available when you set “Decode Type” of “SURROUND DECODER” to

Higher to enrich the reverberant sound and lower to have clear sound.

“bSurround” or “Neo:6 Music”. Decode Type

Item

0 ms to 250 ms

Adjusts the delay between the direct Higher to enhance the delay sound and reverberant sound generation. effect, and lower to reduce it.

Reverb Delay

bSurround

Center Spread

Selects whether to spread the center channel signals to left and right when 2-channel source is played.

Center Image

Adjusts the center orientation level (broadening effect) of the front sound field.

0% to 100% Adjusts the volume of the reverberant sound.

Reverb Level

Higher to strengthen the reverberant sound, and lower to weaken it. Neo:6 Music

The following items are available when you select “2ch Stereo” or “7ch Stereo”. Sound program

2ch Stereo

Item

Function

Settings

Direct

Selects whether to automatically by the Auto, Off DSP circuit when an analog audio source is played back.

Level

Adjusts the entire volume.

-5 to 0 to +5 -5 to 0 to +5

Front / Rear Balance

Adjusts the front and rear volume balance.

Left / Right Balance

Adjusts the left and right volume balance.

Higher to enhance the front side, and lower to enhance the rear side. -5 to 0 to +5

7ch Stereo

Higher to enhance the right side, and lower to enhance the left side. 0 to 5 to 10

Height Balance

Adjust the height volume balance using the presence speakers.

Monaural Mix

Enables/disables monaural sound output.

Higher to enhance the upside, and lower to enhance the downside. (The presence speakers do not produce sounds when “Height Balance” is set to “0”.) Off, On

X Available items in “7ch Stereo” vary depending on the speaker system being used.

En

107

Function

Settings Off, On Select “On” to spread center channel signals to left and right if you feel the center sound is too strong when 2-channel source is played. 0.0 to 0.3 to 1.0 Higher to strengthen the center orientation level (less broadening effect) and lower to weaken (more broadening effect).

Configuring various functions (Setup menu) You can configure the unit’s various function with the menu displayed on the TV screen.

1 2

4


Press ON SCREEN. Use the cursor keys to select “Setup” and press ENTER.

X To return to the previous screen during menu operations, press RETURN.

3

5 6

Use the cursor keys (e/r) to select a menu.

En

108

Use the cursor keys to select a setting and press ENTER. To exit from the menu, press ON SCREEN.

Setup menu items Menu

Item

Function

Auto Setup

Automatically optimizes the speaker settings (YPAO).

Configuration

45

Selects a speaker system.

111

Front

Selects the size of the front speakers.

111

Center

Selects whether or not a center speaker is connected and its size.

111

Surround

Selects whether or not surround speakers are connected and their size.

112

Surround Back

Selects whether or not surround back speakers are connected and their size.

112

Front Presence

Selects whether or not presence speakers are connected and their size.

112

Subwoofer

Selects whether or not a subwoofer is connected and its phase.

112

Layout

Selects the layouts of the surround speakers and front presence speakers.

112

Power Amp Assign

Speaker

Page

Manual Setup

Lipsync

Distance

Sets the distance between each speaker and listening position.

113

Level

Adjusts the volume of each speaker.

113

Parametric EQ

Adjusts the tone with an equalizer.

113

Test Tone

Enables/disables the test tone output.

114

Delay Enable

Enables/disables the Lipsync adjustment for each input source.

114

Auto/Manual Select

Selects the method to adjust the delay between video and audio output.

114

Adjustment

Adjusts the delay between video and audio output manually.

115

Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.

115

Max Volume

Sets the limit value of the volumes.

115

Initial Volume

Sets the initial volume for when this receiver is turned on.

115

Adaptive DSP Level

Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted.

115

CINEMA DSP 3D Mode

Enables/disables CINEMA DSP 3D.

115

Virtual Surround Back Speaker

Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.

115

Object Decode Mode

Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X contents.

116

Video Mode

Enables/disables the video signal processing (resolution and aspect ratio).

116

HDMI Control

Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).

117

Audio Output

Selects a device to output audio.

118

Standby Through

Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.

118

Sound

Video

HDMI

En

109

Menu

Network

Item

Function

Page

Network Connection

Selects the network connection method.

119

IP Address

Configures the network parameters (such as IP address).

119

Network Standby

Selects whether to enable/disable the function that turns on the unit from other network devices.

119

MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.

120

Network Name

Edits the network name (the unit’s name on the network) displayed on other network devices.

120

Bluetooth

Enables/disables the Bluetooth functions.

121

Disconnect

Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit.

74

Bluetooth Standby

Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby).

121

Transmitter

Enables/disables the Bluetooth audio transmitter function.

121

Audio Receive Bluetooth Audio Send Main Zone Set

Multi Zone

Device Search

Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter.

75

Zone Rename

Changes the zone name (for main zone) displayed on the TV screen.

122

Volume

Enables/disables volume adjustments for Zone2 output.

122

Max Volume

Sets the Zone2 limit value of the volumes.

122

Initial Volume

Sets the Zone2 initial volume for when the unit is turned on.

122

Zone Rename

Changes the zone name (for Zone2) displayed on the TV screen.

122

Enables/disables switching to the party mode.

123

Dimmer (Front Display)

Adjusts the brightness of the front display.

123

Short Message

Selects whether to display short messages on the TV screen when the unit is operated.

123

Wallpaper

Selects the image to be used as wallpaper on the TV.

123

Trigger Mode

Specifies the condition for the TRIGGER OUT jack to function.

124

Target Zone

Zone2 Set

Party Mode Set

Display Set Function Trigger Output

Specifies the zone with which the TRIGGER OUT jack functions are synchronized.

124

Memory Guard

Prevents accidental changes to the settings.

124

Auto Power Standby

Sets the amount of time for the auto-standby function.

125

ECO Mode

Enables/disables the eco mode (power saving mode).

125

Select an on-screen menu language.

126

ECO Language

En

110

⬛ Configuration

Speaker (Manual Setup)

Configures the output characteristics of the speakers. Configures the speaker settings manually.

X

X

When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm (6-1/4”) or

Default settings are underlined.

larger or “Small” if it is smaller than 16 cm (6-1/4”).

Front Selects the size of the front speakers. Settings Large

Select this option for large speakers. The front speakers will produce all of the front channel frequency components. Select this option for small speakers.

Small

⬛ Power Amp Assign Selects a speaker system.

The subwoofer will produce front channel low-frequency components lower than the specified crossover frequency (default: 80 Hz).

X

In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations are

“Front” is automatically set to “Large” when “Subwoofer” is set to “None”.

possible using the presence speakers, Zone2 speakers, or bi-amp connection.

Center

Settings

Selects whether or not a center speaker is connected and its size.

Basic

Select this option when you use a normal speaker system (not using Zone2 speakers or a bi-amp connection).

7.1 +1Zone

Select this option when you use Zone2 speakers in addition to the 7.1 system in the main zone (p.28).

5.1.2 +1Zone 5.1 BI-Amp

Settings Large

Select this option when you use Zone2 speakers in addition to the 5.1.2 system in the main zone (p.29).

The center speaker will produce all of the center channel frequency components. Select this option for small speakers.

Small

Select this option when you connect speakers that bi-amp connections (p.29).

None

En

Select this option for large speakers.

111

The subwoofer or front speakers will produce center channel low-frequency components lower than the specified crossover frequency (default: 80 Hz). Select this option when no center speaker is connected. The front speakers will produce center channel audio.

Surround

Front Presence

Selects whether or not surround speakers are connected and their sizes.

Selects whether or not front presence speakers are connected and their size.

Settings

Settings

Large


Large


The surround speakers will produce all of the surround channel frequency components.

Small

Select this option for small speakers.

None

Select this option when no front presence speakers are connected.

Select this option for small speakers. Small

None

The subwoofer or front speakers will produce surround channel low-frequency components lower than the specified crossover frequency (default: 80 Hz).

Subwoofer

Select this option when no surround speakers are connected.

Selects whether or not a subwoofer is connected and its phase.

The front speakers will produce surround channel audio. Virtual CINEMA DSP works when you select a sound program.

Settings

Surround Back

Normal

Select this option when a subwoofer is connected (phase not reversed). The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels.

Reverse

Select this option when a subwoofer is connected (phase reversed). The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels.

Use

Selects whether or not surround back speakers are connected and their sizes. Settings Select this option when one large speaker is connected. Large x1

The surround back speaker will produce all of the surround back channel frequency components.

None

Select this option when two large speakers are connected. Large x2

X

The surround back speakers will produce all of the surround back channel frequency components.

When the bass sound is lacking or unclear, switch the subwoofer phase.

Select this option when one small speaker is connected. Small x1

Layout

The subwoofer or front speakers will produce surround back channel low-frequency components lower than the specified crossover frequency (default: 80 Hz).

Selects the layouts of the surround speakers and front presence speakers.

Select this option when two small speakers are connected. Small x2

None

Select this option when no subwoofer is connected. The front speakers will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels.

Surround

The subwoofer or front speakers will produce surround back channel low-frequency components lower than the specified crossover frequency (default: 80 Hz).

Selects a surround speaker layout when surround speakers are used. Settings

Select this option when no surround back speakers are connected. The surround speakers will produce surround back channel audio.

X

Rear

Select this option when surround speakers are placed on the rear side of the room.

Front

Select this option when surround speakers are placed on the front side of the room. Virtual CINEMA FRONT (p.67) works in this case.

This setting is not available when “Surround” is set to “None”, or when “Layout (Surround)” is set to “Front”.

X This setting is not available when “Configuration (Surround)” is set to “None”.

En

112

Front Presence

⬛ Parametric EQ

Selects a front presence layout when front presence speakers are used. This setting facilitates

Adjusts the tone with an equalizer.

the optimization of the sound field effect. Settings Settings Front Height

Select this option when front presence speakers are installed on the front side wall.

Overhead

Select this option when front presence speakers are installed to the ceiling.

Dolby Enabled SP

Manual

Select this option when using the Dolby Enabled speakers as the front presence speakers.

X • This setting is not available when “Configuration (Front Presence)” is set to “None”.

Select this option when you want to adjust the equalizer manually. For details, see “Manual equalizer adjustment”.

YPAO:Flat

Adjusts individual speakers to achieve the same characteristics.

YPAO:Front

Adjusts individual speakers to achieve the same characteristics as the front speakers.

YPAO:Natural

Adjusts all speakers to achieve a natural sound.

Through

Does not use the equalizer.

X

• To play Dolby Atmos contents using the front presence speakers, see “Presence speaker layout” (p.22).

“YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto Setup” have already been saved (p.45). Press ENTER again to view the measurement results.

⬛ Distance

⬛ Manual equalizer adjustment

Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”. Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Subwoofer

1

Set “Parametric EQ” to “Manual” and press ENTER.

2 3

Press ENTER again to enter the edit screen. Use the cursor keys to select a speaker and press ENTER.

X

Setting range 0.30 m to 3.00 m to 24.00 m (1.0 ft to 10.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments

• To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”. • To copy the parametric equalizer values acquired with “Auto Setup” (p.45) to the “Manual” fields for fine

⬛ Level

adjustment, select “PEQ Data Copy” and then an equalizer type.

4

Adjusts the volume of each speaker.

Use the cursor keys (e/r) to select a center frequency from the 7 preset bands (4 for subwoofer) and the cursor keys (q/w) to adjust the gain.

Choices Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Subwoofer Setting range -10.0 dB to 0.0 dB to +10.0 dB (0.5 dB increments)

Setting range Gain: -20.0 dB to +6.0 dB

En

113

5

Sound

To fine-adjust the center frequency or Q factor (bandwidth), press ENTER repeatedly to select an item.

Configures the audio output settings.

Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected band and the cursor keys (q/w) to adjust the gain. Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and the cursor keys (q/w) to adjust the gain. Setting range Center frequency: 15.6 Hz to 16.0 kHz (15.6 Hz to 250.0 Hz for subwoofer) Q factor: 0.500 to 10.080

6


⬛ Test Tone

⬛ Lipsync

Enables/disables the test tone output. Test tone output helps you to adjust the speaker


balance or equalizer while confirming its effect.

Delay Enable

Settings Off

Does not output test tones.

On

Outputs test tones automatically when you adjust the speaker balance or equalizer.

Enables/disables the Lipsync adjustment for each input source. Choices HDMI 1-5, AV 1-6, V-AUX, AUDIO 1-2 Settings Disable

Disable the Lipsync adjustment for the selected input source.

Enable

Enables the Lipsync adjustment for the selected input source.

Auto/Manual Select Selects the method to adjust the delay between video and audio output. Setting range

Auto

Adjusts the delay between video and audio output automatically when a TV that s an automatic lipsync function is connected to the unit via HDMI. If necessary, you can fine-adjust the audio output timing in “Adjustment”.

Manual

Select this option when you want to adjust the delay between video and audio output manually. Adjust the audio output timing in “Adjustment”.

X Even if “Auto/Manual Select” is set to “Auto”, the automatic adjustment does not work depending on the TV connected to the unit. In this case, adjust the delay manually in “Adjustment”.

En

114

⬛ Adaptive DSP Level

Adjustment Adjusts the delay between video and audio output manually when “Auto/Manual Select” is set

Selects whether to automatically adjust the CINEMA DSP effect level when the volume is

to “Manual”. You can fine-adjust the audio output timing when “Auto/Manual Select” is set to

adjusted.

“Auto”.

Settings

Setting range 0 ms to 500 ms (1 ms increments)

X • “Offset” shows the difference between automatic adjustment and fine adjustment.

Off

Does not adjust the effect level automatically.

On

Adjusts the effect level automatically.

⬛ CINEMA DSP 3D Mode

• This setting is also available in “Lipsync Adjustment” (p.99) in the “Option” menu.

Enables/disables CINEMA DSP 3D (p.65). If this function is set to “On”, CINEMA DSP 3D

⬛ Dynamic Range

functions with the selected sound programs (except 2ch Stereo and 7ch Stereo).

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS

Settings

signals) playback.

Off

Disables CINEMA DSP 3D.

Settings

On

Enables CINEMA DSP 3D.

Maximum

Produces audio without adjusting the dynamic range.

Standard

Optimizes the dynamic range for regular home use.

⬛ Virtual Surround Back Speaker

Sets the dynamic range for clear sound even at night or at low volumes.

Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.

When playing back Dolby TrueHD signals, the dynamic range is automatically adjusted based on the input signal information.

When VSBS is enabled, the unit creates VSBS when no surround back speakers are connected.

Minimum/Auto

Settings

⬛ Max Volume Sets the limit value of the volumes.

On

Enables Virtual Surround Back Speaker (VSBS).

VSBS is effective only when 6.1- or 7.1-channel content is played back.

⬛ Initial Volume Sets the initial volume when the receiver is turned on. Settings

On

Disables Virtual Surround Back Speaker (VSBS).

X

Setting range -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB

Off

Off

Sets the level to the volume level of the unit when it last entered standby mode. Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB increments). (This setting works only when the initial volume is set lower than “Max Volume”.)

En

115

⬛ Object Decode Mode

Video

Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X Configures the video output settings.

contents. Settings Disable

Disables playback of object-based audio signals. Those signals will be played in normal 5.1-/7.1-channel audio.

Enable

Enables playback of object-based audio signals.

X Regardless of this setting, object-based audio signals are played in normal 5.1-/7.1-channel audio if any of CINEMA DSP programs is selected.

⬛ Video Mode Enables/disables the video signal processing (resolution and aspect ratio). Settings Direct Processing

Disables the video signal processing. Enables the video signal processing. Select a resolution and an aspect ratio in “Resolution” and “Aspect”.

X • When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to reduce video output delay. • When “Video Mode” is set to “Processing” and the resolution is being converted, short messages are not displayed on the TV screen.

Resolution Selects a resolution to output HDMI video signals when “Video Mode” is set to “Processing”. Settings Through

Does not convert the resolution.

Auto

Selects a resolution automatically in accordance with TV resolution.

480p/576p, 720p, 1080i, 1080p, 4K

Output video signals with a selected resolution. (Only the resolutions ed by your TV are selectable.)

X If you need to select a resolution that is not ed by your TV, set “MON.CHK” (p.130) in the “ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on your TV normally.)

En

116

HDMI

Aspect Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to “Processing”.

Configures the HDMI settings.

Settings Through

Does not convert the aspect ratio.

16:9 Normal

Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the screen.

X This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p (4K) signals.

⬛ HDMI Control Enables/disables HDMI Control (p.147). Settings Off On

Disables HDMI Control. Enables HDMI Control. Configure the settings in “TV Audio Input”, “ARC” and “Standby Sync”.

Y To use HDMI control, you need to perform the HDMI Control link setup (p.147) after connecting HDMI Control-compatible devices.

TV Audio Input Selects an audio input jack of the unit to be used for TV audio input when “HDMI Control” is set to “On”. The unit’s input source automatically switches to TV audio when the TV input is switched to its built-in tuner. Settings AV 1-6, AUDIO 1-2 Default AV 4

Y When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an external device because the input will be used for TV audio input.

En

117

⬛ Audio Output

ARC Enables/disables ARC (p.148) when “HDMI Control” is set to “On”.

Selects a device to output audio.

Settings

X

Off

Disables ARC.

On

Enables ARC.

This setting (except for “HDMI OUT2” [RX-V781 only]) is available only when “HDMI Control” is set to “Off”.

Amp

Y

Enables/disables the audio output from the speakers connected to the unit.

You do not need to change this setting normally. In case noises are produced from the speakers connected to the

Settings

unit because TV audio signals input to the unit via ARC are not ed by the unit, set “ARC” to “Off” and use the TV’s speakers.

Standby Sync

Off

Disables the audio output from the speakers.

On

Enables the audio output from the speakers.

Select whether to use HDMI control to link the standby behavior of the TV and the unit when

HDMI OUT1, HDMI OUT2 (RX-V781 only)

“HDMI Control” is set to “On”.

HDMI OUT (TV) (RX-V681 only)

Settings

Enables/disables the audio output from a TV connected to the HDMI OUT jack.

Off

Does not set the unit to standby mode when the TV is turned off.

On

Sets the unit to standby mode when the TV is turned off.

Auto

Sets the unit to standby mode when the TV is turned off only when the unit is receiving TV audio or HDMI signals.

Settings Off

Disables the audio output from the TV.

On

Enables the audio output from the TV.

⬛ Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. If this function is set to “On” or “Auto”, you can use the input selection keys (HDMI 1-5, V-AUX) to select an HDMI input even when the unit is in standby mode (the standby indicator on the unit blinks). Settings Off

En

118

(This setting is available only when “HDMI Control” is set to “Off”.) Does not output videos/audio to the TV.

On

Outputs videos/audio to the TV. (The unit consumes more power than when “Off” is selected.)

Auto

Outputs videos/audio to the TV. If no signals are detected, the unit is set to the power saving mode.

Network

⬛ Manual network settings

Configures the network settings.

1 2

Set “DH” to “Off”. Use the cursor keys (q/w) to select a parameter type and press ENTER. IP Address

3

⬛ Network Connection

Specifies an IP address.

Subnet Mask

Specifies a subnet mask.

Default Gateway

Specifies the IP address of the default gateway.

DNS Server (P)

Specifies the IP address of the primary DNS server.

DNS Server (S)

Specifies the IP address of the secondary DNS server.

Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.

Selects the network connection method. Settings Wired

Select this option when you want to connect the unit to a network with a commercially-available network cable (p.40)

Wireless (Wi-Fi)

Select this option when you want to connect the unit to a network via the wireless router (access point). For details on settings, see “Connecting the unit to a wireless network” (p.54).

Wireless Direct

Select this option when you want to connect a mobile device to the unit directly. For details on settings, see “Connecting a mobile device to the unit directly (Wireless Direct)” (p.59).

4


5

To configure another network parameter, repeat steps 2 to 4.

6

To save the changes, use the cursor keys to select “OK” and press ENTER.

7


⬛ Network Standby Selects whether the unit can be turned on from other network devices (network standby). Settings

⬛ IP Address

Off

Configures the network parameters (such as IP address). On

DH

Disables the network standby function. Enables the network standby function. (The unit consumes more power than when “Off” is selected.) Enables the network standby function.

Select whether to use a DH server.

Auto

Settings Off

Does not use a DH server. Configure the network parameters manually. For details, see “Manual network settings”.

On

Uses a DH server to automatically obtain the unit’s network parameters (such as IP address).

En

119

(If “Network Connection” is set to “Wired”, the unit is set to the power saving mode when the network cable is disconnected.)

⬛ MAC Address Filter

⬛ Network Name

Sets the MAC address filter to limit access to the unit from other network devices.

Edits the network name (the unit’s name on the network) displayed on other network devices. ⬛ Setup procedure

Filter Enables/disables the MAC address filter.

1


Settings

2


Off

Disables the MAC address filter.

On

Enables the MAC address filter. In “MAC Address 1-10”, specify the MAC addresses of the network devices that will be permitted access to the unit.

X AirPlay (p.86) and DMC (p.103) operations are not subject to the MAC address filter.

MAC Address 1-10 Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to

X

the unit when “Filter” is set to “On”.

To clear the entry, select “CLEAR”.

⬛ Setup procedure

1

3


Use the cursor keys (q/w) to select “MAC Address 1-5” or “MAC Address 6-10” and press

X

ENTER.


4

2

Use the cursor keys (q/w) to select an MAC address number and press ENTER.

3

Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.

4


5

To save the changes, use the cursor keys to select “OK” and press ENTER.

6


En

120


⬛ Audio Send

Bluetooth

Configures the Bluetooth settings when the unit is used as the Bluetooth audio transmitter. Configures the Bluetooth settings.

Transmitter Enables/disables the Bluetooth audio transmitter function. When this function is enabled, you can enjoy audio played back on the unit using Bluetooth speakers/headphones (p.75). Settings

⬛ Bluetooth Enables/disables the Bluetooth function (p.74). Settings Off

Disables the Bluetooth function.

On

Enables the Bluetooth function.

⬛ Audio Receive Configures the Bluetooth settings when the unit is used as the Bluetooth audio receiver.

Bluetooth Standby Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). If this function is set to “On”, the unit automatically turns on when a connect operation is performed on the Bluetooth device. Settings Off On

Disables the Bluetooth standby function. Enables the Bluetooth standby function. (The unit consumes more power than when “Off” is selected.)

X This setting is not available when “Network Standby” (p.119) is set to “Off”.

En

121

Off

Disables the Bluetooth audio transmitter function.

On

Enables the Bluetooth audio transmitter function.

⬛ Zone2 Set

Multi Zone

Configures the Zone2 settings. Configures the multi zone settings.

Volume Enables/disables volume adjustments for Zone2 output. If you have connected an external amplifier with volume control to the unit, disable volume adjustments for Zone2. Settings

⬛ Main Zone Set

Fixed

Disables volume adjustments for Zone2 output.

Variable

Enables volume adjustments for Zone2 output.

X

Configures the main zone setting.

This setting is not available when “Power Amp Assign” (p.111) is set to “7.1 +1Zone” or “5.1.2 +1Zone”.

Max Volume

Zone Rename Changes the zone name (for main zone) displayed on the TV screen.

Sets the Zone2 limit value of the volumes.

⬛ Setup procedure

Setting range -30.0 dB to +10.0 dB (5.0 dB increments)

1 2


X


This setting is available only when “Power Amp Assign” (p.111) is set to “7.1 +1Zone” or “5.1.2 +1Zone”.

Initial Volume Sets the Zone2 initial volume for when the unit is turned on. Settings

3

Sets the level at the volume level of the unit when it last entered standby mode.

On

Sets at Mute or the specified volume level (-80 dB to +10.0 dB, 0.5 dB increments). (This setting works only when the initial volume is set lower than “Max Volume”.)

X

X

To clear the entry, select “CLEAR”.

This setting is available only when “Power Amp Assign” (p.111) is set to “7.1 +1Zone” or “5.1.2 +1Zone”.


Zone Rename

X

Changes the zone name (for Zone2) displayed on the TV screen.


4

Off

You can change the zone name in the same manner as “Zone Rename” in “Main Zone Set” (p.122).


En

122

⬛ Party Mode Set

Function

Enables/disables switching to the party mode (p.91). Configures the functions that make the unit easier to use. Choice Target: Zone 2 Settings Disable

Disables switching to the party mode.

Enable

Enables switching to the party mode. You can turn on/off the party mode by pressing PARTY on the remote control.

⬛ Display Set Configures the settings related to the front display and TV screen display.

Dimmer (Front Display) Adjusts the brightness of the front display. Setting range -4 to 0 (higher to brighten)

Y The front display may become dark when “ECO Mode” (p.125) is set to “On”.

Short Message Selects whether to display short messages on the TV screen when the unit is operated (such as input selection and volume adjustment). Settings On

Displays short messages on the TV screen.

Off

Does not display short messages on the TV screen.

Wallpaper Selects the image to be used as wallpaper on the TV. Settings

En

123

Piano

Displays the piano image on the TV screen when there is no video signal.

Gray

Displays a gray background on the TV screen when there is no video signal.

⬛ Trigger Output

Target Zone

Sets the TRIGGER OUT jack to function in sync with the power status of each zone or input

Specifies the zone with which the TRIGGER OUT jack functions are synchronized.

switching.

Settings

Trigger Mode Main

Specifies the condition for the TRIGGER OUT jack to function. Settings Power

Source

The TRIGGER OUT jack functions in sync with the power status of the zone specified with “Target Zone.”

Zone2

The TRIGGER OUT jack functions in sync with the input switching in the zone specified with “Target Zone.” An electronic signal is transmitted according to the setting made in “Source.”

Manual

All

Select this to manually switch the output level for electronic signal transmission with “Manual.”

When “Trigger Mode” is set to “Power,” electronic signal transmission is synchronized with the power status of the main zone. When “Trigger Mode” is set to “Source,” electronic signal transmission is synchronized with the input switching in the main zone. When “Trigger Mode” is set to “Power,” electronic signal transmission is synchronized with the power status of Zone2. When “Trigger Mode” is set to “Source,” electronic signal transmission is synchronized with the input switching in Zone2. When “Trigger Mode” is set to “Power,” electronic signal transmission is synchronized with the power status of the main zone or Zone2. When “Trigger Mode” is set to “Source,” electronic signal transmission is synchronized with the input switching in the main zone or Zone2.

Source

⬛ Memory Guard

Specifies the output level of the electronic signal transmitted with each input, switching when

Prevents accidental changes to the settings.

“Trigger Mode” is set to “Source”. Settings Choices HDMI 1-5, AV 1-6, V-AUX, AUDIO 1-2, TUNER, PHONO, (network sources), Bluetooth, USB

Off

Does not protect the settings.

Settings

On

Protects the settings until “Off” is selected.

X

Low

Stops the electronic signal transmission when you switch to the input source specified in this option.

High

Transmits the electronic signal when you switch to the input source specified in this option.

When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.

Icon

Manual Switches the output level for electronic signal transmission manually when “Trigger Mode” is set to “Manual”. This setting can also be used to confirm proper function of the external device connected via the TRIGGER OUT jack. Choices Low

Stops the electronic signal transmission.

High

Transmits the electronic signal.

En

124

⬛ ECO Mode

ECO

Enables/disables the eco (power saving) mode. Configures the power supply settings.

You can reduce the unit’s power consumption by setting “ECO Mode” to “On”. After setting, be sure to press ENTER to restart the unit. Settings Off

Disables the eco mode.

On

Enables the eco mode.

Y • When “ECO Mode” is set to “On”, the front display may become dark. • If you want to play audio at high volume, set “ECO Mode” to “Off”.

⬛ Auto Power Standby Sets the amount of time for the auto-standby function. If you do not operate the unit or if no input signals are detected for the specified time, the unit will automatically go into standby mode. Settings Off

Does not set the unit to standby mode automatically.

20 Minutes

Sets the unit to standby mode when you have not operated the unit and no input signals are detected for 20 minutes.

2 Hours, 4 Hours, 8 Hours, 12 Hours

Sets the unit to standby mode when you have not operated the unit for the specified time. For example, when “2 Hours” is selected, the unit will switch to standby mode if you do not operate it for 2 hours.

Default U.K. and Europe models: 20 Minutes Other models: Off

X Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front display.

En

125

Language

Viewing information about the unit (Information menu)

Select an on-screen menu language.

You can view information about the unit using the TV screen.

1 2

Press ON SCREEN.

3

Use the cursor keys (e/r) to select an information type.

4


Use the cursor keys to select “Information” and press ENTER.

Settings English, Japanese, French, German, Spanish, Russian, Italian, Chinese

X The information on the front display is provided in English only.

En

126

⬛ HDMI Monitor

Types of information

Displays information about the TVs connected to the HDMI OUT jacks. You can check the following information in the Information menu.

⬛ Audio Signal Displays information about the current audio signal. Format

Interface

TV interface

Video Resolution

Resolutions ed by the TV

X (RX-V781 only)

Audio format of the input signal

Use the cursor keys (q/w) to switch between “OUT1” and “OUT2”.

The number of source channels in the input signal (front/surround/LFE)

Channel Input

⬛ Network

For example, “5.1 (3/2/0.1)” means 5.1ch in total (3 front channels, 2 surround channels, and LFE).

Displays the network information on the unit.

(When DTS:X content is played back)

(When using wired or wireless [Wi-Fi] network connection)

For example, “7.1.4” denotes “standard 7.1-channel plus 4 for overhead speaker channels”.

Output

Sampling

The number of samples per second of the input digital signal

Bitrate

The amount of data per second of the input bitstream signal

Dialogue

The dialogue normalization level of the input bitstream signal

Channel

The number of signal output channels (for example, “5.1.2” denotes “standard 5.1-channel plus 2 for overhead speaker channels”) and the speaker terminals from which signals are output

IP Address

IP address

Subnet Mask

Subnet mask

Default Gateway

The IP address of the default gateway

DNS Server (P)

The IP address of the primary DNS server

DNS Server (S)

The IP address of the secondary DNS server

MAC Address (Ethernet) MAC address MAC Address (Wi-Fi)

X

vTuner ID

Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the

Network Name

Network name (the unit’s name on the network)

Wired/Wireless

The status of the wired or wireless connection

specifications and settings of the playback device.

⬛ Video Signal

SSID

Displays information about the current video signal. HDMI Signal

Presence or absence of HDMI signal input/output

HDMI Resolution

Resolutions of input signal (analog or HDMI) and output signal (HDMI)

Analog Resolution

Resolutions of input signal (analog) and signal output at the MONITOR OUT jacks (analog)

En

127

vTuner ID

(When using wireless [Wi-Fi] network connection) The SSID of the wireless network

Configuring the system settings (ADVANCED SETUP menu)

(When using Wireless Direct) SSID

The SSID of the wireless network

Security

Security method

Security Key

Security key

IP Address

IP address

Subnet Mask

Subnet mask

Configure the system settings of the unit while viewing the front display.

1 2

MAC Address (Wi-Fi)

MAC address

Network Connection

“Wireless Direct” indication

Set the unit to standby mode. While holding down STRAIGHT on the front , press MAIN ZONE z. MAIN ZONE z

⬛ System Displays the system information on the unit. Remote ID

The unit’s remote control ID setting (p.129)

TV Format

The unit’s video signal type (p.130)

Speaker Impedance

The speaker impedance setting of the unit (p.129)

Tuner Freq. Step

PROGRAM

3 4 5

(Asia and General models only) The FM/AM tuning frequency setting of the unit (p.129)

System ID

System ID number

Firmware Version

The version of firmware installed on the unit

If the unit detects a newer firmware over the network,

(mail icon) appears at the upper right of the

“Information” and “System” icons, and the corresponding message will be displayed in this screen. You can update the unit’s firmware by pressing ENTER in this screen and following the procedure in “Updating the unit’s firmware via the network” (p.132).

⬛ Multi Zone Displays information about Zone2. Input

The input source selected for Zone2

Volume

The volume setting for Zone2

Press PROGRAM to select an item. Press STRAIGHT to select a setting. Press MAIN ZONE z to set the unit to standby mode and turn it on again.

The new settings take effect.

X

En

128

STRAIGHT

ADVANCED SETUP menu items

Selecting the remote control ID (REMOTE ID)

X Default settings are underlined.

Item

REMOTE IDÕÕ+& Function

Page

Change the unit’s remote control ID so that it matches the remote control’s ID (default: ID1).

SP IMP.

Changes the speaker impedance setting.

129

When using multiple Yamaha AV receivers, you can set each remote control with a unique

REMOTE ID

Selects the unit’s remote control ID.

129

remote control ID for its corresponding receiver.

129

Settings ID1, ID2

⬛ Changing the remote control ID of the remote control

(Taiwan, Brazil, Asia and General models only)

TU

Changes the FM/AM tuning frequency setting.

TV FORMAT

Switches the video signal type.

130

MON.CHK

Removes the limitation on HDMI video output.

130

4K MODE

Selects the HDMI 4K signal format.

130

INIT

Restores the default settings.

130

UPDATE

Updates the firmware.

131

VERSION

Checks the version of firmware currently installed on the unit.

131

1

To select ID1, hold down the cursor key (e) and SCENE (BD/DVD) together for 3 seconds. To select ID2, hold down the cursor key (e) and SCENE (TV) together for 3 seconds.

Changing the FM/AM tuning frequency setting (TU) (Taiwan, Brazil, Asia and General models only)

Changing the speaker impedance setting (SP IMP.)

67ÕÕÕÕ(/#/ Change the FM/AM tuning frequency setting of the unit depending on your country or region.

SP IMP.ÕÕ8¬MIN

Settings

Change the unit’s speaker impedance settings depending on the impedance of the speakers connected.

FM100/AM10

Select this when you want to adjust the FM frequency by 100-kHz steps and AM by 10-kHz steps.

FM50/AM9

Select this when you want to adjust the FM frequency by 50-kHz steps and AM by 9-kHz steps.

Settings 6 Ω MIN

Select this option when you connect 6-ohm speakers to the unit. You can also use 4-ohm speakers as the front speakers.

8 Ω MIN

Select this option when you connect 8-ohm or higher speakers to the unit.

En

129

Switching the video signal type (TV FORMAT)

Selecting the HDMI 4K signal format (4K MODE)

TV FORMATÕNTSC

4K MODEÕMODE 2

Switch the video signal type of the unit so that it matches to the format of your TV.

Selects the format of signals input/output at the unit when HDMI 4K (60 Hz/50 Hz) compatible TV and playback device are connected to the unit.

Settings NTSC, PAL

Settings

Default U.S.A., Canada, Korea, Taiwan, Brazil and General models: NTSC

Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format. MODE 1

Other models: PAL

Removing the limitation on HDMI video output (MON.CHK)

MODE 2

(4:2:0 format only for VIDEO AUX [HDMI IN] jack) Depending on the connected device or HDMI cables, video may not be displayed correctly. In this case, select “MODE 2”. Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format.

Y When “MODE 1” is selected, use a high-speed HDMI cable that s 18 Gbps.

MON.CHKÕÕÕÕYES

Restoring the default settings (INIT)

The unit automatically detects resolutions ed by a TV connected to the HDMI OUT jack. Disable the monitor check function if you want to specify a resolution in “Resolution” (p.116)

INITÕÕÕÕCANCEL

when the unit cannot detect the TV’s resolution or when you want to specify a different resolution than the detected resolution.

Restores the default settings for the unit.

Settings

Choices

YES

Enables the monitor check function. (Outputs video signals with a resolution ed by the TV only.)

SKIP

Disables the monitor check function. (Outputs video signals with a specified resolution regardless of compatibility with the TV.)

VIDEO

Y Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV after “MON.CHK” has been set to “SKIP”.

En

130

Restores the default settings for video configurations.

ALL

Restores the default settings for the unit.

CANCEL

Does not perform an initialization.

Updating the firmware (UPDATE)

Checking the firmware version (VERSION)

UPDATEÕÕÕÕÕ75$

VERSIONÕÕxx.xx

New firmware that provides additional features or product improvements will be released as

Check the version of firmware currently installed on the unit.

needed. Updates can be ed from the Yamaha website. If the unit is connected to the

X

Internet, you can the firmware via the network. For details, refer to the information

• You can also check the firmware version in “System” (p.128) in the “Information” menu.

supplied with updates.

• It may take a while until the firmware version is displayed.

⬛ Firmware update procedure Do not perform this procedure unless firmware update is necessary. Also, make sure you read the information supplied with updates before updating the firmware.

1

Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to start firmware update. Choices USB

Update the firmware using a USB memory device.

NETWORK

Update the firmware via the network.

X If the unit detects newer firmware over the network, the corresponding message will be displayed after ON SCREEN is pressed. In this case, you can also update the unit’s firmware by following the procedure in “Updating the unit’s firmware via the network” (p.132).

En

131

Updating the unit’s firmware via the network New firmware that provides additional features or product

X

improvements will be released as needed. If the unit is connected to the

If you want to update the firmware later, select “CLOSE” in Step 2.

Internet, you can the firmware via the network and update it.

appears at the upper right of the “Information” and “System” icons, and a message will

(mail icon)

be displayed in the “System” screen (p.128). You can update the unit’s firmware by pressing ENTER in the “System” screen.

Note • Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20 minutes or more (depending on your Internet connection speed).

Information icon

• If the unit is connected to the wireless network, network update may not be possible depending on the condition of the wireless connection. In this case, update the firmware using the USB memory device (p.131). • For details on update, visit the Yamaha website.

X You can also update the firmware using the USB memory device from the “ADVANCED Cursor keys ENTER

SETUP” menu (p.131).

Message

A firmware update is available if the following message is displayed after ON SCREEN is pressed.

System Icon

1 2

Read the on-screen description. To start the firmware update, use the Cursor keys to select “START” and press ENTER. The on-screen display turns off.

3

If “Update Success Please Power Off!” appears on the front display, press MAIN ZONE z on the front .

The firmware update is complete.

En

132

APPENDIX Frequently asked questions every time you add a new HDMI Control-compatible device to your system. For information on

The new speaker system does not provide an ideal sound balance...

how HDMI Control works between your TV and playback devices, refer to the instruction manuals for each device.

If you have changed speakers or have a new speaker system, use “Auto Setup” to optimize the

I want to turn off the on-screen messages displayed during operations...

speaker settings again (p.45). If you want to adjust the speaker settings manually, use “Manual Setup” in the “Setup” menu (p.111).

Since we have small children, we want to set limitations on the volume control...

By default, short messages are displayed on the TV screen when the unit is operated (such as

If a small child accidentally operates the controls on the main unit or remote control, the

the short messages.

input selection and volume adjustment). If the short messages bother you when you are watching movies or sports, configure “Short Message” (p.123) in the “Setup” menu to turn off

volume may suddenly increase. This may also cause injury or damage the unit or speakers. We recommend using “Max Volume” in the “Setup” menu to set the maximum volume level for the

I want to prevent accidental changes to the settings...

unit in advance (p.115). You can also set the maximum volume for Zone2 (p.122).

You can protect the settings configured on the unit (such as speaker settings) by utilizing

I am occasionally startled by a sudden loud sound when turning on the unit...

“Memory Guard” in the “Setup” menu (p.124).

By default, the volume level when the unit last entered standby mode is automatically applied.

The unit’s remote control is simultaneously controlling another Yamaha product as well as the unit...

If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the volume to be

When using multiple Yamaha products, the remote control may work on another Yamaha

applied when the receiver is turned on (p.115). You can also set the initial volume for Zone2

product or another remote control may work on the unit. If this happens, different

(p.122).

remote control IDs for the devices that you want to control with each remote control (p.129).

We are bothered by volume differences when switching between input sources…

I want to enjoy videos/audio played back on the video device even when the unit is in standby mode…

You can correct volume differences between input sources by utilizing “Input Trim” in the

If you have connected a video device to the unit with HDMI, you can output videos/audio

“Option” menu (p.100).

played back on the video device to the TV even when the unit is in standby mode. To use this

I made HDMI connections but HDMI Control does not work at all...

function, set “Standby Through” (p.118) in the “Setup” menu to “On” or “Auto”. You can also switch the input source using the remote control of the unit when this function is enabled.

To use HDMI Control, you need to perform the HDMI Control link setup (p.147). After connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit, enable HDMI Control on each device and perform the HDMI Control link setup. This setup is required

En

133

Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and the nearest authorized Yamaha dealer or service center.

First, check the following:

1 2 3

The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely. The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on. The connectors of each cable are securely inserted in to jacks on each device.

Power, system and remote control Problem

Cause

Remedy

The power does not turn on.

The protection circuitry has been activated three times consecutively. When the unit is in this condition, the standby indicator on the unit blinks if you try to turn on the power.

The power does not turn off.

The internal microcomputer has frozen, due to an external electric shock Hold down MAIN ZONE z on the front for more than 10 seconds to initialize and (such as lightning or excessive static electricity) or to a drop in the power reboot the unit. (If the problem persists, disconnect the power cable from the AC wall supply voltage. outlet and plug it again.)

The power turns off (standby mode) immediately.

The unit was turned on while a speaker cable was shorted.

Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers (p.25).

The sleep timer worked.

Turn on the unit and start playback again.

The auto-standby function activated because the unit was not used for the specified time.

To disable the auto-standby function, set “Auto Power Standby” in the “Setup” menu to “Off” (p.125).

The speaker impedance setting is incorrect.

Set the speaker impedance to match your speakers (p.129).

The protection circuitry has been activated because of a short circuit.

Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers (p.25).

As a safety precaution, capability to turn on the power is disabled. your nearest Yamaha dealer or service center to request repair.

The unit enters standby mode automatically.

The unit is not reacting.

The internal microcomputer is frozen, due to an external electric shock Hold down MAIN ZONE z on the front for more than 10 seconds to initialize and (such as lightning or excessive static electricity) or to a drop in the power reboot the unit. (If the problem persists, disconnect the power cable from the AC wall supply voltage. outlet and plug it again.)

En

134

Problem

The unit cannot be controlled using the remote control.

Cause

Remedy

The unit is out of the operating range.

Use the remote control within the operating range (p.5).

The batteries are weak.

Replace with new batteries.

The unit’s remote control sensor is exposed to direct sunlight or strong lighting.

Adjust the lighting angle, or reposition the unit.

(RX-V781 [China, Korea, U.K. and Europe models] only) The remote control is set to control external devices. The remote control IDs of the unit and the remote control are not identical.

Press RECEIVER to set the remote control to control the unit (the key lights up in orange).

Change the remote control ID of the unit or the remote control (p.129).

Audio Problem

No sound.

Cause

Remedy

Another input source is selected.

Select an appropriate input source with the input selection keys.

Signals that the unit cannot reproduce are being input.

Some digital audio formats cannot be played back on the unit. To check the audio format of the input signal, use “Audio Signal” in the “Information” menu (p.127).

The cable connecting the unit and playback device is defective.

If there is no problem with the connection, replace with another cable.

The maximum volume is set.

Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.115).

A device connected to the output jacks of the unit is not turned on.

Turn on all devices connected to the output jacks of the unit.

The playback source does not contain a signal for the channel.

To check it, use “Audio Signal” in the “Information” menu (p.127).

The currently selected sound program/decoder does not use the speaker.

To check it, use “Test Tone” in the “Setup” menu (p.114).

Audio output of the speaker is disabled.

Perform “Auto Setup” (p.45) or use “Configuration” in the “Setup” menu to change the speaker settings (p.111).

The volume of the speaker is set too low.

Perform “Auto Setup” (p.45) or use “Level” in the “Setup” menu to adjust the speaker volume (p.113).

The speaker cable connecting the unit and the speaker is defective.

If there is no problem with the connection, replace with another speaker cable.

The speaker is malfunctioning.

To check it, replace with another speaker. If the problem persists, the unit may be malfunctioning.

The playback source does not contain LFE or low-frequency signals.

To check if the subwoofer is working properly, use “Test Tone” in the “Setup” menu (p.114).

Subwoofer output is disabled.

Perform “Auto Setup” (p.45) or set “Subwoofer” in the “Setup” menu to “Use” (p.112).

The volume of the subwoofer is too low.

Adjust the volume on the subwoofer.

The subwoofer has been turned off by its auto-standby function.

Disable the auto-standby function of the subwoofer or adjust its sensitivity level.

The volume cannot be increased.

No sound is coming from a specific speaker.

No sound is coming from the subwoofer.

En

135

Problem

No sound from the playback device (connected to the unit with HDMI).

No sound from the playback device (when HDMI Control is used).

No sound from the TV (when HDMI Control is used).

Cause

Remedy

The TV does not HD (High-bandwidth Digital Content Protection).

Refer to the instruction manuals for the TV and check the TV’s specifications.

The unit is set not to output audio input through HDMI jacks from the SPEAKERS terminals.

In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.118).

The number of devices connected to the HDMI OUT jack exceeds the limit.

Disconnect some of the HDMI devices.

The TV is set to output audio from the TV speakers.

Change the audio output setting on your TV so that the playback device audio is output from the speakers connected to the unit.

TV audio is selected as the input source.


The TV is set to output audio from the TV speakers.

Change the audio output setting on your TV so that the TV audio is output from the speakers connected to the unit.

A TV that does not ARC is connected to the unit only with an HDMI cable.

Use a digital optical cable to make an audio connection (p.33).

(If the TV is connected to the unit with an audio cable) The TV audio input setting does not match the actual connection. (If you are trying to use ARC)

Set “ARC” in the “Setup” menu to “On” (p.118). Also, enable ARC on the TV.

ARC is disabled on the unit or TV. Only the front speakers work on multichannel audio.

Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack (p.117).

The playback device is set to output 2-channel audio (such as PCM) only.

To check it, use “Audio Signal” in the “Information” menu (p.127). If necessary, change the digital audio output setting on the playback device.

The unit is too close to another digital or radio frequency device.

Move the unit further away from the device.

The cable connecting the unit and playback device is defective.


The volume of the unit is too high.

Turn down the volume. If “ECO Mode” is set to “On”, set it to “Off” (p.125).

A device connected to the unit’s output jacks is not turned on.

Turn on all devices connected to the unit’s output jacks.

Noise/hum is heard.

The sound is distorted.

En

136

Video Problem

Cause

Remedy

Another input source is selected on the unit.


Another input source is selected on the TV.

Switch the TV input to display the video from the unit.

The video signal output from the unit is not ed by the TV.

Set “MON.CHK” in the “ADVANCED SETUP” menu to “YES” (p.130).

The cable connecting the unit and TV (or playback device) is defective.


The input video signal (resolution) is not ed by the unit.

To check the information about the current video signal (resolution), use “Video Signal” in the “Information” menu (p.127). For information about video signals ed by the unit, see “HDMI signal compatibility” (p.149).

No video.

No video from the playback device (connected to the unit with HDMI).

The TV does not HD (High-bandwidth Digital Content Protection). The playback device that s HD 2.2 is connected to other than the HDMI 1-3 jack.

Refer to the instruction manuals for the TV and check the TV’s specifications. If you want to play back contents that require HD 2.2-compatible devices, both the TV and playback device must HD 2.2. To play back contents that require HD 2.2-compatible devices, connect the playback device to the HDMI 1-3 jack (p.35).

The number of devices connected to the HDMI OUT jack is over the limit. Disconnect some of the HDMI devices. The TV is not connected to the unit via HDMI.

You can display the menu of the unit on the TV only when they are connected with an HDMI cable. If necessary, use an HDMI cable to connect them (p.33).

Another input source is selected on the TV.

Switch the TV input to display the video from the unit (HDMI OUT jack).

The menu of the unit is not displayed on the TV.

En

137

FM/AM radio Problem

Cause

Remedy

There is multi-path interference.

Adjust the FM antenna height or orientation, or place it in a different location.

Your area is too far from the FM station transmitter.

Set “FM Mode” in the “Option” menu to “Mono” to select monaural FM radio reception (p.100).

FM radio reception is weak or noisy.

Use an outdoor FM antenna. We recommend using a sensitive multi-element antenna. AM radio reception is weak or noisy.

The noises may be caused by fluorescent lamps, motors, thermostats, or It is difficult to completely eliminate noise. It may be reduced by using an outdoor AM other electrical equipment. antenna. Select the station manually (p.70). Your area is too far from the FM station transmitter. Use an outdoor antenna. We recommend using a sensitive multi-element antenna. Adjust the AM antenna orientation.

Radio stations cannot be selected automatically.

Select the station manually (p.70).

The AM radio signal is weak.

Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with the supplied AM antenna. AM radio stations cannot be ed as presets.

Auto Preset is for ing FM radio stations only. AM radio stations manually (p.71).

Auto Preset has been used.

En

138

Bluetooth Problem

Cause

Remedy

The Bluetooth function of the unit is disabled.

A Bluetooth connection cannot be established.

No sound is produced, or the sound is interrupted during playback.

Enable the Bluetooth function (p.121).

Another Bluetooth device is already connected to the unit.

Terminate the current Bluetooth connection and then establish a new connection (p.74).

The unit and the Bluetooth device are too far apart.

Move the Bluetooth device closer to the unit.

There is a device (such as microwave oven and wireless LAN) that outputs signals in the 2.4 GHz frequency band nearby.

Move the unit away from those devices.

The Bluetooth device does not A2DP.

Use a Bluetooth device that s A2DP.

The connection information ed on the Bluetooth device is not working for some reason.

Delete the connection information on the Bluetooth device, and then establish a connection between the Bluetooth device and the unit again (p.74).

The volume of the Bluetooth device is set too low.

Turn up the volume of the Bluetooth device.

The Bluetooth device is not set to send audio signals to the unit.

Switch the audio output of the Bluetooth device to the unit.

The Bluetooth connection has been terminated.

Establish a Bluetooth connection between the Bluetooth device and the unit again (p.74).

The unit and the Bluetooth device are too far apart.

Move the Bluetooth device closer to the unit.

There is a device (such as microwave oven and wireless LAN) that outputs signals in the 2.4 GHz frequency band nearby.

Move the unit away from those devices.

USB and network Problem

Cause

Remedy

The USB device is not connected to the USB jack securely.

Turn off the unit, reconnect your USB device, and turn the unit on again.

The file system of the USB device is not FAT16 or FAT32.

Use a USB device with FAT16 or FAT32 format.

The data in the USB device is protected by the encryption.

Use a USB device without an encryption function.

The network parameters (IP address) have not been obtained properly.

Enable the DH server function on your router and set “DH” in the “Setup” menu to “On” on the unit (p.119). If you want to configure the network parameters manually, check that you are using an IP address which is not used by other network devices in your network (p.119).

The unit does not detect the USB device. Folders and files in the USB device cannot be viewed.

The network feature does not function.

The unit cannot connect to the Internet via a wireless router (access point).

The wireless router (access point) is turned off.

Turn on the wireless router.

The unit and the wireless router (access point) are too far apart.

Place the unit and the wireless router (access point) closer to each other.

There is an obstacle between the unit and the wireless router (access point).

Move the unit and the wireless router (access point) in a location where there are no obstacles between them.

En

139

Problem

Cause

Remedy

Microwave ovens or other wireless devices in your neighborhood might disturb the wireless communication.

Turn off these devices.

Wireless network is not found. Access to the network is restricted by the firewall settings of the wireless Check the firewall setting of the wireless router (access point). router (access point). Configure the sharing setting and select the unit as a device to which music contents are shared (p.79).

The media sharing setting is not correct.

Some security software installed on your PC is blocking the access of the Check the settings of security software installed on your PC. unit to your PC. The unit does not detect the PC.

The files in the PC cannot be viewed or played back.

The Internet radio cannot be played.

The iPod does not recognize the unit when using AirPlay.

The unit and PC are not in the same network.

Check the network connections and your router settings, and then connect the unit and the PC to the same network.

The MAC address filter is enabled on the unit.

In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or specify the MAC address of your PC to allow it to access to the unit (p.120).

The files are not ed by the unit or the media server.

Use the file format ed by both the unit and the media server. For information about the file formats ed by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.79).

The selected Internet radio station is currently not available.

There may be a network problem at the radio station, or the service may have been stopped. Try the station later or select another station.

The selected Internet radio station is currently broadcasting silence.

Some Internet radio stations broadcast silence at certain of times of the day. Try the station later or select another station.

Access to the network is restricted by the firewall settings of your network devices (such as the router).

Check the firewall settings of your network devices. The Internet radio can be played only when it es through the port designated by each radio station. The port number varies depending on the radio station.

The unit is connected to a multiple SSID router.

Access to the unit might be restricted by the network separation function on the router. Connect the iPod to the SSID which can access the unit.

The unit and smartphone/tablet are not in the same network.

Check the network connections and your router settings, and then connect the unit and smartphone/tablet to the same network.

The MAC address filter is enabled on the unit.

In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or specify the MAC address of your smartphone/tablet to allow it to access to the unit (p.120).

It may not be possible depending on the condition of the network.

Update the firmware via the network again or use a USB memory device (p.131).

The application for smartphone/tablet “AV CONTROLLER” does not detect the unit.

Firmware update via the network is failed.

En

140

Error indications on the front display Message Access denied

Cause

Remedy

Access to the PC is denied.

Configure the sharing settings and select the unit as a device to which music contents are shared (p.79).

The unit cannot access the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. Make sure your router and modem are turned on.

Access error There is a problem with the signal path from the network to the unit.

Check the connection between the unit and your router (or hub) (p.40). Check SP Wires

The speaker cables short circuit.

Twist the bare wires of the cables firmly and connect to the unit and speakers properly.

Internal Error

An internal error has occurred.

the nearest authorized Yamaha dealer or service center.

No content

There are no playable files in the selected folder.

Select a folder that contains files ed by the unit.

No device

The unit cannot detect the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Please wait

The unit is preparing for connecting to the network.

Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn it on again.

RemID Mismatch

The remote control IDs of the unit and the remote control are not identical.

Change the remote control ID of the unit or the remote control (p.129).

Unable to play

The unit cannot play back the songs stored on the PC for some reason.

Check if the format of files you are trying to play is ed by the unit. For information about the formats ed by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.79). If the unit s the file format, but still cannot play back any files, the network may be overloaded with heavy traffic.

USB Overloaded

An overcurrent is flowing through the USB device.

Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.

Version error

Firmware update is failed.

Update the firmware again.

En

141

Glossary This section explains the technical used in this manual.

Dolby TrueHD Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to eight channels of 96

Audio information (audio decoding format)

kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray discs).

Dolby Atmos

DSD (Direct Stream Digital)

Introduced first in the cinema, Dolby Atmos brings a revolutionary sense of dimension and immersion to the Home

DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super Audio

Theater experience. Dolby Atmos is an adaptable and scalable object based format that reproduces audio as

CDs). The signals are stored at a high-frequency sampling rate (such as 2.8224 MHz and 5.6448 MHz). The highest

independent sounds (or objects) that can be accurately positioned and move dynamically throughout the 3

frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology offers better

dimensional listening space during playback. A key ingredient of Dolby Atmos is the introduction of a height plane of

audio quality than that used for CDs.

sound above the listener.

DTS 96/24

Dolby Atmos Stream

DTS 96/24 is a compressed digital audio format that s 5.1-channel and 96 kHz/24-bit audio. This format

Dolby Atmos content will be delivered to your Dolby Atmos enabled AV receiver via Dolby Digital Plus or Dolby

remains fully compatible with the existing multichannel audio systems that DTS Digital Surround. This

TrueHD on Blu-ray Disc, able files and streaming media. A Dolby Atmos stream contains special metadata

technology is used for music DVDs, etc.

that describes the positioning of sounds within the room. This object audio data is decoded by a Dolby Atmos AV

DTS Dialog Control

receiver and scaled for optimum playback through Home Theater speaker systems of every size and configuration.

DTS Dialog Control allows you to boost the dialog. This can be useful in noisy environments to help make the dialog

Dolby Digital

more intelligible. People with impaired hearing may also benefit. Note that the content creator may disable the use

Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that s 5.1-channel

of this feature in the mix, so that DTS Dialog Control may not always be available. Note that updates to your AVR may

audio. This technology is used for audio on most DVD discs.

add more functionality to DTS Dialog Control or increase the range of the feature.

Dolby Digital EX

DTS Digital Surround

Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby Digital

DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that s 5.1-channel audio.

Surround EX.

This technology is used for audio on most DVD discs.

Dolby Digital Plus

DTS-ES

Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that s

DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This decoder adds

7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems that

a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a surround back sound is

Dolby Digital. This technology is used for audio on BD (Blu-ray discs).

recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a discrete surround back channel is

Dolby Enabled Speaker

recorded.

A convenient alternative to speakers built into the ceiling, products utilizing Dolby speaker technology employ the

DTS Express

ceiling above you as a reflective surface for reproducing audio in the height plane above the listener. Dolby enabled

DTS Express is a compressed digital audio format that s 5.1-channel audio and allows a higher compression

speakers feature a unique upward firing driver and special signal processing that can be built into a conventional

rate than the DTS Digital Surround format developed by DTS, Inc. This technology is developed for audio streaming

speaker, or a standalone speaker module, minimally impacting the overall speaker system footprint while providing

services on the Internet and secondary audio on BD (Blu-ray discs).

an immersive listening experience during Dolby Atmos and Dolby surround playback.

DTS-HD High Resolution Audio

Dolby Surround

DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that s

Dolby surround is a next generation surround technology that intelligently up mixes stereo; 5.1 and 7.1 content for

7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the existing

playback through your surround speaker system. Dolby surround is compatible with traditional speaker layouts, as

multichannel audio systems that DTS Digital Surround. This technology is used for audio on BD (Blu-ray

well as Dolby Atmos enabled playback systems that employ in-ceiling speakers or products with Dolby speaker

discs).

technology.

DTS-HD Master Audio DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray discs). En

142

DTS Neo:6

WMA (Windows Media Audio)

DTS Neo:6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music mode” for

One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic

music sources and “Cinema mode” for movie sources. This technology provides discrete full-bandwidth matrix

technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing

channels of surround sound.

data quantity by about 1/20 maintaining a certain level of audio quality.

DTS:X DTS:X is the next generation object-based, multi-dimensional audio technology from DTS. Unbound from channels,

Audio information (others)

DTS:X conveys the fluid movement of sound to create an incredibly rich, realistic and immersive soundscape - in front of, behind, beside and above the audience - more accurately than ever before. DTS:X offers the ability to automatically adapt the audio to the speaker layout that best fits the space, from a television’s built-in speakers to

Bi-amplification connection (Bi-amp)

a home surround theater system to a dozen or more speakers in a commercial cinema. Immerse yourself at

A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification connection, the

www.dts.com/dtsx

unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a consequence, the tweeter and

FLAC

woofer provide clear audio signal without the interference.

FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio formats in

LFE (Low Frequency Effects) 0.1 channel

compression rate but provides higher audio quality.

This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This channel is

MP3

added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio effects. This channel is labeled 0.1 because it is limited to only low frequency audio.

One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing data quantity by about 1/10

Lip sync

maintaining a certain level of audio quality.

Video output sometimes lags behind audio output due to the complexity of signal processing caused by an increase

MPEG-4 AAC

in video signal capacity. Lip sync is a technique for automatically correcting the timing lag between audio and video output.

An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming services on Internet because it allows a high compression rate of data while maintaining better audio quality than MP3.

Neural:X Neural:X is the latest downmixing/upmixing and spatial remapping technology from DTS. It is built in to DTS:X to provide upmix of Neural:X-encoded and non-encoded (PCM) data. In DTS:X for AVRs and Sound Bars, Neural:X can produce up to 11.x channels.

PCM (Pulse Code Modulation) PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This technology is the basis of all other audio format. This technology is used as a lossless audio format called Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray discs).

Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. • Sampling frequency Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate. When the sampling frequency is higher, the range of frequencies that can be played back are wider. • Quantization bit The number of quantization bits indicate the degree of accuracy when converting the sound level into a numeric value. When the number of quantized bits is higher, the expression of the sound level is more accurate.

WAV Windows standard audio file format, which defines the method of recording the digital data obtained by converting audio signals. By default, the PCM method (no compression) is used, but you can also use other compression methods.

En

143

HDMI and video information

Yamaha technologies

Component video signal

CINEMA DSP (Digital Sound Field Processor)

With the component video signal system, the video signal is separated into the Y signal for luminance and the Pb and

Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best

Pr signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals

experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room

is independent.

size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the

Composite video signal

sound that you hear. Based on a wealth of actually measured data, CINEMA DSP, Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own home.

With the composite video signal system, color, brightness, and synchronization data signals are combined and transmitted with a single cable.

CINEMA DSP 3D

Deep Color

The actually measured sound field data contain the information of the height of the sound images. CINEMA DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the accurate and

Deep Color is a technology that HDMI specification s. Deep Color increases the number of available colors

intensive 3D sound fields in a listening room.

within the boundaries defined by the RGB or YCbCr color space. Conventional color systems process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology allows HDTVs and other displays to

Compressed Music Enhancer

increase from millions of colors to billions of colors and eliminate on-screen color banding for smooth tonal

The Compressed Music Enhancer feature compensates for missing harmonics in compression music formats (such

transitions and subtle gradations between colors.

as MP3). As a result, this technology provides improved performance for the overall sound system.

HD

SILENT CINEMA

HD (High-bandwidth Digital Content Protection) is a digital copy protection form that prevents copying of digital

Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones

contents as it travels across connections (such as HDMI).

have been set for each sound program, so that accurate representations of all the sound programs can be enjoyed

HDMI

on headphones.

HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video signal

Virtual CINEMA DSP

transmission. This interface transmits both digital audio and digital video signals using a single cable without any

Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with front left

loss. HDMI complies with HD (High-bandwidth Digital Content Protection) and provides a secure audio/video

and right speakers. Even if the surround speakers are not connected, the unit creates the realistic sound field in a

interface. For further information on HDMI, visit the HDMI website at “http://www.hdmi.org/”.

listening room.

x.v.Color

Virtual CINEMA FRONT

“x.v.Color” is a technology that the HDMI specification s. It is a more extensive color space than sRGB and

Virtual CINEMA FRONT allows the system to virtually reproduce the sound field of the surround speakers with front

allows the expression of colors that were not hitherto possible. While remaining compatible with the color gamut of

surround speakers. Even if the surround speakers placed in the front, the unit creates the realistic sound field in a

sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid, natural images.

listening room.

Virtual Presence Speaker (VPS) Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without front

Network information

presence speakers. Even if the front presence speakers are not connected, the unit creates the 3D sound field in your room.

SSID

Virtual Surround Back Speaker (VSBS)

SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.

Virtual Surround Back Speaker allows the system to virtually reproduce the sound field of the surround back

Wi-Fi

speakers. Even if the surround back speakers are not connected, the unit adds a sense of depth to the rear sound filed

Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or connect to the Internet

of CINEMA DSP.

wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the complexity of making connections with network cables by using wireless connection. Only products that complete Wi-Fi Alliance interoperability tests can carry the “Wi-Fi Certified” trademark.

WPS WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy establishment of a wireless home network.

En

144

File formats

ed devices and file formats

For information about specifications of each file, refer to the instruction manual of your

This section explains the devices and file formats ed by the unit.

recording device or consult file’s help.

ed devices

⬛ USB/PC (NAS)

For information about specifications of each device, refer to the instruction manual of it.

Sampling frequency

Quantization bitrate

(kHz)

(bit)

WAV *

32/44.1/48/88.2/96/ 176.4/192

MP3

Bitrate

The number of channels

Gapless playback

16/24

⏤

2

✔

32/44.1/48

⏤

8 to 320

2

⏤

WMA

32/44.1/48

⏤

8 to 320

2

⏤

MPEG-4 AAC

32/44.1/48

⏤

8 to 320

2

⏤

FLAC

32/44.1/48/88.2/96/ 176.4/192

16/24

⏤

2

✔

ALAC

32/44.1/48/88.2/96

16/24

⏤

2

✔

AIFF

32/44.1/48/88.2/96/ 176.4/192

16/24

⏤

2

✔

DSD

2.8 MHz/5.6 MHz

1

⏤

2

⏤

⬛ Bluetooth device

File

• The unit s Bluetooth devices that A2DP or AVR. • A Bluetooth device may not be detected by the unit or some feature may not be compatible, depending on the model.

⬛ USB devices • The unit s USB mass storage class devices (e.g., flash memories or portable audio players) using FAT16 or FAT32 format. • Do not connect devices other than USB mass storage class devices (such as USB chargers or USB hubs), PCs, card readers, an external HDD, etc. • USB devices with encryption cannot be used. • Some features may not be compatible, depending on the model or manufacturer of the USB storage device.

* Linear PCM format only

X

⬛ AirPlay

• To play back FLAC files stored on a PC or NAS, you need to install server software that s sharing of FLAC files via DLNA on your PC or use a NAS that s FLAC files.

AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain

• Digital Rights Management (DRM) contents cannot be played back.

Lion or later, and Mac and PC with iTunes 10.2.2 or later. (as of March 2016) Made for. iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad (3rd and 4th generation), iPad 2 iPod touch (5th generation) (as of March 2016)

En

145

Video conversion table

Video signal flow Video signals input from a video device to the unit are output

X

to a TV as shown below.

• You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” (p.116) in the “Setup” menu. • The unit does not convert 480-line and 576-line video signals interchangeably.

HDMI out

Video device

The unit

480i/ 576i

480p/ 576p

720p

1080i

1080p

4K

m

m

m

m

m

m

m

m

m

m

m

720p

m

m

m

m

1080i

m

m

m

m

1080p/50, 60 Hz

m

m

m

m

m

m

TV

Resolution

480i/576i 480p/576p

HDMI in

HDMI out

HDMI

HDMI

HDMI

HDMI

HDMI in

COMPONENT VIDEO out

1080p/24 Hz

COMPONENT VIDEO

COMPONENT VIDEO

COMPONENT VIDEO out COMPONENT VIDEO

m

480i/576i

PR

PR

PR

PB

PB

PB

PB

Y

Y

Y

Y

m

m

m

m

m

COMPONENT VIDEO in

VIDEO

1080i

480i/ 576i

m m

480p/576p

m

720p

m

1080i VIDEO in

720p

COMPONENT VIDEO

PR

VIDEO

480p/ 576p

m

4K COMPONENT VIDEO in

480i/ 576i

VIDEO out

VIDEO out VIDEO

VIDEO

VIDEO in

m

480i/576i

m: Available

En

146

m

m

m

m

m

m

Information on HDMI

(Example) HDMI Control

This section explains the functions related to HDMI and its signal compatibility.

HDMI Control

HDMI Control

Turns on and displays video from the playback device

Playback starts

HDMI Control allows you to operate external devices via HDMI. If you connect a TV that

Press SCENE (BD/DVD)

s HDMI Control to the unit with an HDMI cable, you can control the unit (such as power

To use HDMI Control, you need to perform the following HDMI Control link setup after

and volume) with TV remote control operations. You can also control playback devices (such

connecting the TV and playback devices.

as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable.

For details on settings and operating your TV, refer to the instruction manual for the TV.

For details on connections, see “Connecting a TV” (p.33) and “Connecting video devices (such

Y

as BD/DVD players)” (p.35).

This setup is required every time you add a new HDMI Control-compatible device to your system.

Operations available from the TV’s remote control

1 2

• Standby synchronization • Volume control including mute • Switching to input audio from the TV when the TV input is switched to its built-in tuner

Turn on the unit, TV, and playback devices. Configure the settings of the unit.

• Switching to input video/audio from the selected playback device

1

Switch the TV input to display video from the unit.

• Switching between audio output devices (the unit or TV speaker)

2

Press ON SCREEN.

(Example) HDMI Control

Playback device also turns off

ON SCREEN Cursor keys ENTER

HDMI Control

The unit turns off (standby)

3 Turn off the TV

Operations available from the unit’s remote control • Starting playback on the playback device and turning on the TV with a scene selection (p.63) • Switching the TV input to display the on-screen menu (when ON SCREEN is pressed) • Controlling the playback device (playback and menu operations) using the external device operation keys

En

147

Use the cursor keys to select “Setup” and press ENTER.

4

Y

Use the cursor keys (e/r) to select “HDMI”.

• If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices exceeds the limit. In this case, disable HDMI Control on the devices not in use. • If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on the TV. • We recommend using TV and playback devices from the same manufacturer so that HDMI Control works more effectively. • We do not assure the operation of all HDMI Control-compatible devices.

3

5 6

Use the cursor keys (q/w) to select “HDMI Control” and press ENTER.

7

Press ON SCREEN.

Audio Return Channel (ARC)

Use the cursor keys to select “On”.

ARC allows you to input TV audio to the unit with the HDMI cable which transmits video signal to the TV. Check the following after the HDMI Control settings.

Enable HDMI Control on the TV and playback devices (such as HDMI

1 2

Control-compatible BD/DVD players).

4

Turn off the main power of the TV and then turn off the unit and playback

If you cannot hear the TV audio, check the following:

Turn on the unit and playback devices and then turn on the TV.

• “ARC” (p.118) in the “Setup” menu is set to “On”. • The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked

Switch the TV input to display the video from the unit.

“ARC”) on the TV. Some HDMI jack on the TV is not compatible with ARC. For details, refer to the instruction

Check the followings.

manual for the TV.

On the unit: The input to which the playback device is connected is selected. If not, select

Y

the input source manually.

• If the audio is interrupted while using ARC, set “ARC” (p.118) in the “Setup” menu to “Off” and use a digital

On the TV: The video from the playback device is displayed.

8

Check that the input source of the unit will be automatically switched to “AV 4” and the TV audio will be played back on the unit.

devices.

5 6 7

Select a TV program with the TV remote control.

optical cable to input TV audio to the unit (p.35). • When using ARC, connect a TV with an HDMI cable that s ARC.

Check that the unit is properly synchronized with the TV by turning off the TV

X

or adjusting the TV volume with the TV remote control.

“AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks, use “TV Audio Input” (p.117) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.63), you also need to change the input assignment for SCENE (TV).

En

148

HDMI signal compatibility Audio signals Audio signal type 2ch Linear PCM Multichannel Linear PCM

Audio signal format

Compatible media (example)

2ch, 32 to 192 kHz, 16/20/24 bit

CD, DVD-Video, DVD-Audio

8ch, 32 to 192 kHz, 16/20/24 bit

DVD-Audio, BD (Blu-ray disc), HD DVD

DSD

2 to 5.1ch, 2.8224 MHz, 1 bit

SACD

Bitstream

Dolby Digital, DTS

DVD-Video

Bitstream (High definition audio)

Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio, DTS-HD High BD (Blu-ray disc), HD DVD Resolution Audio, DTS Express

Video signals The unit is compatible with the video signals of the following resolutions: • VGA • 480i/60 Hz • 576i/50 Hz • 480p/60 Hz • 576p/50 Hz • 720p/60 Hz, 50 Hz • 1080i/60 Hz, 50 Hz • 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz • 4K/60 Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz

Y • When PM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending on the type of the DVD player. • The unit is not compatible with HD-incompatible HDMI or DVI devices. For details, refer to the instruction manual for each device. • To decode audio bitstream signals on the unit, set the input source device appropriately so that the device outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device). For details, refer to the instruction manual for the playback device.

En

149

Trademarks Bluetooth protocol stack (Blue SDK) Copyright 1999-2014 OpenSynergy GmbH Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Surround EX, and the double-D symbol are trademarks of Dolby Laboratories.

All rights reserved. All unpublished rights reserved.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

Google Noto Fonts Copyright © 2012 Google Inc. All rights reserved.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTS:X logo are ed trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or ed trademarks of HDMI Licensing LLC in the United States and other countries.

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0

x.v.Color™ “x.v.Color” is a trademark of Sony Corporation.

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

s iOS 7 or later for setup using Wireless Accessory Configuration. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.

iTunes, AirPlay, iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc., ed in the U.S. and other countries.

DLNA™ and DLNA CERTIFIED™ are trademarks or ed trademarks of Digital Living Network Alliance. All rights reserved. Unauthorized use is strictly prohibited.

Windows™ Windows is a ed trademark of Microsoft Corporation in the United States and other countries.

Internet Explorer, Windows Media Audio and Windows Media Player are either ed trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Android™ Google Play™ Android and Google Play are trademarks of Google Inc.

iPad Air and iPad mini are trademarks of Apple Inc.

App Store is a service mark of Apple Inc. The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. The Wi-Fi Protected Setup™ Identifier Mark is a certification mark of Wi-Fi Alliance®. The Bluetooth® word mark and logos are ed trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. MusicCast is a trademark or ed trademark of Yamaha Corporation. En

150

Explanations regarding GPL This product utilizes GPL/LGPL open-source software in some sections. You have the right to obtain, duplicate, modify, and redistribute this open-source code only. For information on GPL/LGPL open source software, how to obtain it, and the GPL/LGPL license, refer to the Yamaha Corporation website (http://.yamaha.com/sourcecodes/musiccast/).

Specifications Input jacks

[RX-V681]

• Analog Audio

– Speaker Out x 9 (7 ch) (FRONT L/R, CENTER, SURROUND L/R, EXTRA SP 1 L/R*1, EXTRA SP 2 L/R*2)

Audio x 5 (AV 5-6, AUDIO 1-2, PHONO) • Digital Audio (ed frequencies: 32 kHz to 96 kHz) Optical x 2 (AV 1, AV 4) Coaxial x 2 (AV 2-3) • Video Composite x 4 (AV 3-6) Component x 2 (AV 1-2) • HDMI Input HDMI x 6 (HDMI 1-5, V-AUX) • Other USB x 1 (USB2.0) NETWORK x 1 (100Base-TX/10Base-T)

HDMI

[F.PRESENCE, ZONE2]

• 4K UltraHD Video (include 4K/60, 50Hz 10/12bit), 3D Video, ARC (Audio Return Channel), HDMI Control (CEC), Auto Lip Sync, Deep Color, “x.v.Color”, HD audio playback, 21:9 Aspect Ratio, BT.2020 Colorimetry, HDR Compatible

*2 Note: Assignment is possible

• Video Format (Repeater Mode)

*1 Note: Assignment is possible

[SURROUND BACK, ZONE2, BI-AMP]

– VGA

– Subwoofer Out x 2 (SUBWOOFER 1-2, mono)

– 480i/60 Hz

– ZONE2 OUT x 1

– 576i/50 Hz

– Headphone x 1

– 480p/60 Hz

• Video

– 576p/50 Hz

MONITOR OUT

– 720p/60 Hz, 50 Hz

– Component x 1

– 1080i/60 Hz, 50 Hz

– Composite x 1

– 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz

• HDMI Output

Output jacks

[RX-V781]

• Analog Audio

– 4K/60 Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz • Audio Format

HDMI OUT x 2 (HDMI OUT 1-2)

– Dolby Atmos

[RX-V781]

[RX-V681]

– Dolby TrueHD

– Speaker Out x 9 (7 ch) (FRONT L/R, CENTER, SURROUND L/R, EXTRA SP 1 L/R*1, EXTRA SP 2 L/R*2)

HDMI OUT x 1

– Dolby Digital Plus

*1 Note: Assignment is possible [F.PRESENCE, ZONE2] *2 Note: Assignment is possible [SURROUND BACK, ZONE2, BI-AMP] – Pre Out x 7 (FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R)

– Dolby Digital

Other jacks

– DTS:X

• YPAO MIC x 1

– DTS-HD Master Audio

• REMOTE IN x 1

– DTS-HD High Resolution Audio

• REMOTE OUT x 1

– DTS Express

• TRIGGER OUT x 1

– DTS – DSD 2.8MHz 2-ch to 6-ch

– Subwoofer Out x 2 (SUBWOOFER 1-2, mono)

– PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)

– ZONE2 OUT x 1

• Content Protection: HD compatible (HDMI 1–3: HD 2.2 compatible)

– Headphone x 1

• Link Function: CEC ed

TUNER • Analog Tuner [U.K. and Europe models] FM/AM with Radio Data System x 1 (TUNER) [Other models] FM/AM x 1 (TUNER)

En

151

USB

Compatible Decoding Formats

• Capable of Mass Storage Class USB Memory

• Decoding Format

[RX-V781] (1 kHz, 0.9% THD, 8 Ω)

• Current Supply Capacity: 1 A

– Dolby Atmos

Bluetooth

– Dolby TrueHD, Dolby Digital Plus

• Sink Function Source Device to AVR (ex. Smartphone/Tablet) • Source Function AVR to Sink Device (ex. Bluetooth Headphone) • Capable of Play/Stop Operation from Sink Device • Bluetooth Version........................................................... Ver. 2.1+EDR • ed Profile Sink Function..................................................................A2DP, AVR Source Function ..........................................................................A2DP • ed Codec Sink Function........................................................................ SBC, AAC Source Function ............................................................................SBC

Surround L/R ........................................................................ 130 W/ch

– DTS:X – DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express

Front L/R [U.K. and Europe models].................................... 160 W/ch [RX-V681] (1 kHz, 0.9% THD, 8 Ω)

• Post Decoding Format – Dolby Surround

Front L/R ............................................................................... 125 W/ch

– DTS Neo:6 Music, DTS Neo:6 Cinema

Center ................................................................................... 125 W/ch Surround L/R ........................................................................ 125 W/ch

Audio Section

Surround Back L/R ............................................................... 125 W/ch

• Rated Output Power (2-channel driven) [RX-V781]

• Internet Radio • WiFi function – Capable of WPS by PIN Method and Push-Button-Method – Capable of sharing with iOS devices by wireless connection – Capable of Direct Connection with Mobile Device – Available Security Method: WEP, WPA2-PSK (AES), Mixed Mode – Radio Frequency Band: 2.4GHz – Wireless Network Standard: IEEE 802.11 b/g/n

(1 kHz, 0.9% THD, 4 Ω) Front L/R [U.K. and Europe models].................................... 150 W/ch

Front L/R............................................................................. 95 W+95 W

• AirPlay ed

(1 kHz, 0.9% THD, 4 Ω)

– DTS Digital Surround

• Maximum Communication Distance ................................10 m (33 ft)

• Compatible with DLNA ver. 1.5

Surround Back L/R ............................................................... 130 W/ch

– DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1

(20 Hz to 20 kHz, 0.06% THD, 8 Ω)

• PC Client Function

Front L/R ............................................................................... 130 W/ch Center ................................................................................... 130 W/ch

– Dolby Digital

• Wireless Output ...................................................... Bluetooth Class 2

Network

• Rated Output Power (1-channel driven)

(1 kHz, 0.9% THD, 8 Ω)

• Maximum Effective Output Power (1 kHz, 10% THD, 6 Ω/8 Ω) [RX-V781] Front L/R............................................................................ 160 W/ch

[U.S.A. and Canada models]

Center ................................................................................ 160 W/ch

Front L/R......................................................................... 110 W+110 W Center ......................................................................................... 110 W Surround L/R.................................................................. 110 W+110 W Surround Back L/R......................................................... 110 W+110 W [RX-V681]

Surround L/R ..................................................................... 160 W/ch Surround Back L/R ............................................................ 160 W/ch [RX-V681] Front L/R............................................................................ 150 W/ch Center ................................................................................ 150 W/ch

(20 Hz to 20 kHz, 0.06% THD, 8 Ω) Front L/R............................................................................. 90 W+90 W (1 kHz, 0.9% THD, 8 Ω)

Surround L/R ..................................................................... 150 W/ch Surround Back L/R ............................................................ 150 W/ch • Dynamic Power (IHF)

[U.S.A. and Canada models]

Front L/R (8/6/4/2 Ω) ............................................130/170/195/240 W

Front L/R......................................................................... 105 W+105 W Center ......................................................................................... 105 W Surround L/R.................................................................. 105 W+105 W Surround Back L/R......................................................... 105 W+105 W

• Damping Factor Front L/R, 20 Hz to 20 kHz, 8 Ω.........................................100 or more • Input Sensitivity / Input Impedance PHONO (1 kHz, 100 W/8 Ω) ............................................3.5 mV/47 kΩ AV 5 etc. (1 kHz, 100 W/8 Ω)...........................................200 mV/47 kΩ

En

152

• Maximum Input Signal

• Tone Control Characteristics

AM section

PHONO (1 kHz, 0.1% THD) ........................................................ 60 mV

Bass Boost/Cut......................................... ±6 dB/0.5 dB Step at 50 Hz

AV 5 etc. (1 kHz, 0.5% THD, Effect On) .........................................2.3 V

Bass Turnover ........................................................................... 350 Hz

• Output Level / Output Impedance [RX-V781] PRE OUT ...............................................................................1 V/1.2 kΩ

Treble Boost/Cut.................................... ±6 dB/0.5 dB Step at 20 kHz Treble Turnover ....................................................................... 3.5 kHz • Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)

ZONE2 OUT .................................................................. 470 mV/1.2 kΩ

H.P.F. (Front, Center, Surround, Surround Back).............. 12 dB/oct.

[RX-V681]

L.P.F. (Subwoofer) .............................................................. 24 dB/oct.

ZONE2 OUT .................................................................. 470 mV/1.2 kΩ • Maximum Output Level [RX-V781] PRE OUT ........................................................................................1.6 V • Headphone Impedance ................................................. 16 Ω or more • Frequency Response AV 5 etc. to Front (10 Hz to 100 kHz)..................................... +0/-3 dB • RIAA Equalization Deviation PHONO .................................................................................. 0±0.5 dB • Total Harmonic Distortion

• Video Signal Level

[China model] ..............................................................AC 220 V, 50 Hz

Composite .........................................................................1 Vp-p/75 Ω

[Korea model]..............................................................AC 220 V, 60 Hz

Component

[Australia model].........................................................AC 240 V, 50 Hz

Y ......................................................................................1 Vp-p/75 Ω Pb/Pr ...........................................................................0.7 Vp-p/75 Ω • Video Maximum Input Level .................................... 1.5 Vp-p or more

• Residual Noise (IHF-A Network) Front L/R (Speaker Out) ................................................150 μV or less • Channel Separation PHONO (Input Shorted, 1 kHz/10 kHz) ............. 60 dB/55 dB or more AV 5 etc. (Input 1 kΩ Shorted, 1 kHz/10 kHz) ............................................................................ 70 dB/50 dB or more • Volume Control Main Zone .............................MUTE, -80 dB to +16.5 dB (0.5 dB Step)

[U.K. and Europe models]...........................................AC 230 V, 50 Hz [Asia model]................................................ AC 220 to 240 V, 50/60 Hz • Power Consumption

• Video Signal to Noise Ratio ..........................................50 dB or more

[U.S.A. and Canada models] ......................................................400 W

• Monitor Out Frequency Response

[China, Taiwan, Brazil, Asia and General models].......................270 W

Component ....................................................... 5 Hz to 60 MHz, -3 dB

• Tuning Range

AV 5 etc. (Pure Direct) (Input 1 kΩ Shorted, Speaker Out) ..................................................................................... 110 dB or more

• Power Supply

[Taiwan, Brazil and General models] ...................................................AC 110 to 120/220 to 240 V, 50/60 Hz

FM Section

PHONO (Input Shorted 35 mV, Speaker Out [FRONT]) ....................................................................................... 96 dB or more

General

• Video Signal Type .................................................. NTSC/PAL/SECAM

AV 5 etc. to Front (Pure Direct)

• Signal to Noise Ratio (IHF-A Network)

[Taiwan, Brazil, Asia and General models] .............................................................530/531 kHz to 1710/1611 kHz

[U.S.A. and Canada models] .......................................AC 120 V, 60 Hz

Video Section

PHONO to Speaker Out (FRONT) (20 Hz to 20 kHz, 1 V) .........................................................................................0.02% or less

(20 Hz to 20 kHz, 50 W, 8 Ω) ............................................0.06% or less

[U.S.A. and Canada models] .............................. 530 kHz to 1710 kHz

[Other models] ................................................... 531 kHz to 1611 kHz

SUBWOOFER........................................................................1 V/1.2 kΩ

SUBWOOFER........................................................................1 V/1.2 kΩ

• Tuning Range

[Other models] ...........................................................................300 W • Standby Power Consumption HDMI Control Off, Standby Through Off.....................................0.1 W

[U.S.A. and Canada models]...........................87.5 MHz to 107.9 MHz

HDMI Control ON/Standby through AUTO HDMI no signal and no CEC for 8 hours................................................................0.4 W

[Taiwan, Brazil, Asia and General models] .................................................. 87.5/87.50 MHz to 108.0/108.00 MHz

HDMI Control On, Standby Through On (No Signals) ................1.1 W

[Other models] ............................................87.50 MHz to 108.00 MHz • 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) Mono............................................................................. 3 μV (20.8 dBf) • Signal to Noise Ratio (IHF) Mono............................................................................................69 dB Stereo ..........................................................................................67 dB • Harmonic Distortion (IHF, 1 kHz) Mono.............................................................................................0.5% Stereo ...........................................................................................0.6% • Antenna Input ..........................................................75 Ω unbalanced

Zone2 ....................................MUTE, -80 dB to +10.0 dB (0.5 dB Step)

En

153

Network Standby On Wired.........................................................................................2.1 W Wi-Fi ..........................................................................................2.4 W Wireless Direct..........................................................................2.4 W Bluetooth Standby On ................................................................2.1 W HDMI Control On, Standby Through On (No Signals), Network Standby On (Wireless Direct).......................................3.1 W • Maximum Power Consumption [Taiwan, Brazil, Asia and General models]................................590 W

• Dimensions (W x H x D) [RX-V781]................. 435 x 171 x 379 mm (17-1/8” x 6-3/4” x 14-7/8”) [RX-V681]................. 435 x 171 x 378 mm (17-1/8” x 6-3/4” x 14-7/8”) * Including legs and protrusions • Reference Dimensions (W x H x D) (with wireless antenna upright) [RX-V781]................. 435 x 234 x 379 mm (17-1/8” x 9-1/4” x 14-7/8”) [RX-V681]................. 435 x 234 x 378 mm (17-1/8” x 9-1/4” x 14-7/8”) • Weight [RX-V781]...................................................................10.6 kg (23.4 lbs) [RX-V681]...................................................................10.0 kg (22.1 lbs)

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then the manual file.

En

154

Yamaha Global Site http://www.yamaha.com/ Yamaha s http://.yamaha.com/

Manual Development Department © 2016 Yamaha Corporation Published 03/2016 AM-B0

YH719A0/EN

Rx-v781 Rx-v681 Manual English 482qw

Overview 3z723u

More details 2i4a6q

Related Documents g842

Manual English 2h5n5q

English Manual 366k3a

Manual Firewire 410 (english) 6t4a48

Reason 4 Manual (english) 5b5o20

Dl4 Manual - English 66m6d

Rc-5msih Manual (english) 562y29

More Documents from "Greg" 192x2r

Rx-v781 Rx-v681 Manual English 482qw

Facundo Sarmiento English Pdf 4j3f1x

Dangote Cement Plc -2 1y3q2n

Powerpoint Presentation Petrophysics 3k1g4g

Erp Baan Pdf 51381w