Pm43 5j2m3v

PM43 | PM43c Mid-Range Printer

’s Manual

Intermec Technologies Corporation Worldwide Headquarters 6001 36th Ave.W. Everett, WA 98203 U.S.A. www.intermec.com The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. © 2012 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or ed trademarks of Intermec Technologies Corporation. There are U.S. and foreign patents as well as U.S. and foreign patents pending. Wi-Fi is a ed certification mark of the Wi-Fi Alliance. Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.

ii

PM43 and PM43c Mid-Range Printer Manual

Contents

Contents Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Product Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Global Services and . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Send . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

1 About the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About the PM43 and PM43c Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Identify the Parts of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About the Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About the Ready-to-Work Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 About the Print Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 About the Icon Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 About the Full Touch Display Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the Ready Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 About the Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 About Printer Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Select a Command Language from the Web Page . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Select a Command Language From the Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . 19 Printer Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2 Set Up the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 About Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Load Media for Tear-Off Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Load Media for the Label Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Load Media from an External Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Load Ribbon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 PM43 and PM43c Mid-Range Printer Manual

iii

Contents Connect the Printer to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 About Test Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Print a Test Label with the Icon Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Print a Test Label with the Full Touch Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Calibrate the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Create and Print Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Print on RFID Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

3 Connect the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 About Connecting the Printer to Your PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Connect the Printer Using a Serial Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Connect the Printer Using a USB Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Connect the Printer Using an IEEE 1284 Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Install Printer Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 About Connecting the Printer to Your Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Connect the Printer to an Ethernet Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 About Wireless Communications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Configure Wireless Communications from the Web Page. . . . . . . . . . . . 43 Configure Wireless Communications from the Main Menu. . . . . . . . . . 44 About Bluetooth Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Connect to a Bluetooth Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Configure Bluetooth Communications from the Web Page . . . . . . . . . . 45 Configure Bluetooth Communications from the Main Menu . . . . . . . . 46 About the USB Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Connect a USB Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

4 Configure the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 About the Printer Configuration Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Configure the Printer Using the Web Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Configure the Printer Using the Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Restrict Access to the Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Configure the Printer with PrintSet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Configure the Printer Using Programming Commands . . . . . . . . . . . . . . . . . . . . . 61 Configure the Printer Using SmartSystems Foundation . . . . . . . . . . . . . . . . . . . . . 61 Configure the Printer Using Touchless Configuration. . . . . . . . . . . . . . . . . . . . . . . 61

iv

PM43 and PM43c Mid-Range Printer Manual

About ing Fonts, Images, Applications, Formats, and Web Pages . . . . . . . . . . . . . . 62 Fonts, Images, Applications, Formats, and Web Forms from the Web Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Fonts, Images, Applications, Formats, and Web Forms from a USB Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 About Printer Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Save a Printer Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Load a Printer Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Install or Export a Configuration File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Customize the Printer Web Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

5 Troubleshoot the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Call Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 About Printer System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 View Printer Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Check the Printer Odometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Set Maintenance Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 About Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Configure Error Alert Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Maintenance and Error Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Troubleshoot Printer Problems and Find Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 About Restoring Printer Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Restore Defaults from the Printer Web Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Restore Defaults from the Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Restore Defaults on an Icon Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 About Upgrading the Printer Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 the Printer Firmware Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Upgrade Firmware from the Printer Web Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Upgrade Firmware from a USB Storage Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

PM43 and PM43c Mid-Range Printer Manual

v

6 Maintain the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 About Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Clean the Printhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Clean the Media Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Clean the Exterior of the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Replace the Printhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Replace the Platen Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 About Adjusting the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Prevent Ribbon Wrinkling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Adjust the Printhead Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Adjust the Printhead Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Adjust the Label Gap and Black Mark Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

A Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Printer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 RS-232 Serial Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 USB Device Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 USB Host Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 Ethernet Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

B Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

111

Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Serial Port Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 Ethernet Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113 Wireless 802.11 General Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114 Wireless 802.11 Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 Wireless 802.11 Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116 Bluetooth Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 Media Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 Print Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 General System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123 Display and Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

vi

PM43 and PM43c Mid-Range Printer Manual

System I/O Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 System Network Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 System Maintenance Alert Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

C Print Labels with INPrint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 About the INPrint Page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130 Print INPrint Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130 Predefined INPrint Label Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

PM43 and PM43c Mid-Range Printer Manual

vii

Contents

viii

PM43 and PM43c Mid-Range Printer Manual

Before You Begin

Before You Begin This section provides you with safety information, technical information, and sources for additional product information.

Safety Information Your safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions. This section explains how to identify and understand warnings, cautions, and notes that are in this document. Warning: A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons working on the equipment. Caution: A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data. Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances.

Safety Precautions Note: You may use this printer on an IT power system.

PM43 and PM43c Mid-Range Printer Manual

ix

Before You Begin

Warning: Moving parts are exposed when the cover is open. Make sure the cover is closed before you operate the printer. Warning: Do not open the electronics cover. Dangerous voltage! Warning: Do not remove the bottom plate. Dangerous voltage! Warning: Do not put your fingers inside the print mechanism when the power is on. Caution: Double pole/neutral fusing. Caution: Do not spray the printer with water. If you are using a hose to clean the premises in an industrial environment, remove the printer or protect it carefully from spray and moisture. Caution: Make sure you place the printer on an even surface that can safely its weight and supplies. Caution: You must implement both hardware and software safety precautions to prevent the possibility of undefined system states. Caution: You must ensure that dangerous conditions cannot occur under any circumstances, even for a brief period of time. Caution: Observe all safety and accident prevention regulations applicable to your specific region and application. Caution: Before you use a cleaning card, carefully read the warning text on the envelope.

x

PM43 and PM43c Mid-Range Printer Manual

Before You Begin

Product Identification The machine labels are attached to the underside of the printer and contain information on type, model, serial number, and AC voltage. This document provides warnings regarding personal safety during operation of the printer.

Global Services and Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click > Returns and Repairs > Warranty. Disclaimer of warranties: The sample code included in this document is presented for reference only. The code does not necessarily represent complete, tested programs. The code is provided “as is with all faults.” All warranties are expressly disclaimed, including the implied warranties of merchantability and fitness for a particular purpose.

Web Visit the Intermec web site at www.intermec.com to our current manuals (in PDF). Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click > Knowledge Central to review technical information or to request technical for your Intermec product.

Send Your is crucial to the continual improvement of our documentation. To provide about this manual, please the Intermec Technical Communications department directly at [email protected].

Telephone In the U.S.A. and Canada, call 1-800-755-5505. Outside the U.S.A. and Canada, your local Intermec representative. To search for your local representative, from the Intermec web site, click > Us. PM43 and PM43c Mid-Range Printer Manual

xi

Before You Begin

Who Should Read This Manual This manual provides you with information about the features of the PM43 and PM43c printers, and how to install, configure, operate, maintain, and troubleshoot them.

Related Documents The Intermec web site at www.intermec.com contains our documents (as .pdf files) that you can for free. To documents 1 Visit the Intermec web site at www.intermec.com. 2 Click the Products tab. 3 Using the Products menu, navigate to your product page. For example, to find the PM43 printer product page, click Printers and Media > Industrial Printers > PM43 Mid-Range Printer. 4 Click the Manuals tab. If your product does not have its own product page, click > Manuals. Use the Product Category, the Product Family, and Product to find your documentation.

Patent Information Product is covered by one or more of the following patents: 5110226; 5915865; 5180232; 5927876; 5186558; 5484991; 6015241; 5488223; 6023284; 5542487; 5564841; 6068420;5581293; 6088049; 5593238; 6146030; 5625399; 6151055; 5625401; 6175376; 6283651; 5693931; 6345920; 6350071; 5714995; 6618162; 6665089; 5781708; 6685371; 6732451; 5853252; 7274384; 5859656; 7324125; 5890817; 5940107; 5206662; 5946020; 5473984; 5988898; 6025861; 5548688; 6042279; 5562034; 6068418; 6092940; 5601373; 6099176; 6126348; 5623297; 6189788; 5638106; 6203131; 6210054; 6232994; 6462765; 6505982; 5746521; 6585437; 5751330; 5803635; 6791591; 6802659; 5841954; 7245227; 7329449; 5897255; 7338914; 5915864; 7450265. There may be other U.S. and foreign patents pending.

xii

PM43 and PM43c Mid-Range Printer Manual

1 About the Printer

This chapter introduces the PM43 and PM43c printers, and includes descriptions of printer features and basic operation.

1

Chapter 1 — About the Printer

About the PM43 and PM43c Printer The PM43 and PM43c printers are rugged label printers that include integrated USB, RS-232, and Ethernet interfaces. You can connect the printers to a single desktop PC, to a wired network, or to a wireless network. Features of both printers include: • • • •

• • •

Print speeds of up to 10 ips (406 dpi printhead) and 12 ips (203 and 300 dpi printhead). USB host port for connecting storage devices, scanners, or keyboards. USB device port for connecting to a desktop PC. for printer programming languages including Intermec Fingerprint, Intermec Printer Language (IPL), Direct Protocol, DSim, and ZSim. A wide range of printer accessories. CCXv4 certified. ENERGY STAR® qualified product.

The products described herein comply with the requirements of the ENERGY STAR. As an ENERGY STAR Partner, Intermec Technologies has determined that this product meets the ENERGY STAR guidelines for energy efficiency. For more information on the ENERGY STAR program, see www.energystar.gov. Note: The ENERGY STAR does not represent EPA endorsement of any product or service.

2

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer

The PM43 and PM43c printers with an IEEE 802.11b/g/n radio installed are Wi-Fi® certified for interoperability with other 802.11b/g/n wireless LAN devices.

Identify the Parts of the Printer Use these illustrations to familiarize yourself with the PM43 and PM43c printers. Most of the illustrations in this manual show the PM43 printer. The internal parts and back connectors are the same for both printer models. .FEJBDPWFS

6TFSJOUFSGBDF

1SJOUCVUUPO

Front View of PM43 Printer

PM43 and PM43c Mid-Range Printer Manual

3

Chapter 1 — About the Printer .FEJBDPWFS

6TFSJOUFSGBDF

1SJOUCVUUPO

Front View of the PM43c Printer

.FEJBIBOHFS

3JCOTVQQMZ 3JCOUBLFVQ 1SJOUIFBEMFWFS (BQTFOTPSBEKVTUNFOUXIFFM

Internal View of the PM43 Printer 4

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer 0OPGGTXJUDI &UIFSOFUQPSU 34TFSJBMQPSU 64#EFWJDFQPSU 64#IPTUQPSU "$1PXFS

Back View of the PM43 Printer

About the Front There are two front s available for the PM43 and PM43c printers: • Icon (no display) • Full touch display Both versions of the front contain the Print button and the Ready-to-Work indicator. The PM43 with the full touch display also has a USB port on the front .

PM43 and PM43c Mid-Range Printer Manual

5

Chapter 1 — About the Printer

About the Ready-to-Work Indicator The Ready-to-Work indicator on the front of the printer turns on when the printer is ready to print.

3FBEZUP8PSL JOEJDBUPS

Ready-to-Work Indicator Location

Table 1: Ready-to-Work Indicator Status Description

6

On

Printer is ready for a print job.

Blinking

Printer is not ready for a print job.

Off

Printer is turned off, not communicating, or not ready to print. For example, the printer may be starting up or performing a firmware upgrade.

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer

About the Print Button The blue button on the front is the Print button. Both models of printer have a blue Print button. Use the Print button to feed media, pause print jobs, and print. Use this table to understand the functions of the Print button. Print Button Behavior State of the Printer

Printer Behavior

Starting

Press the Print button during startup to enter Calibration mode or to restore defaults if the printhead is lifted.

Ready

Press the Print button to advance media. Press and hold the Print button for more than two seconds to perform a test feed. If the print key feature is enabled (on), the printer reprints the last print job.

Printing

Press the Print button to stop or pause printing. The printer will stop after it completely prints one label.

Paused

Press the Print button to resume printing.

Error

Press the Print button to advance media if possible.

PM43 and PM43c Mid-Range Printer Manual

7

Chapter 1 — About the Printer

About the Icon Front The icon front contains icons that light up to indicate printer communications, printer errors, and maintenance issues.

1.

1.

Icon Front on a PM43 Printer

Use this table to understand what it means when an icon lights up. Names and Descriptions of Front Icons Icon

Name

Color

Description

Wi-Fi Communications

White

Wireless signal.

Off

Wireless radio disabled or not installed.

Flashing white

Sending or receiving data.

Off

No data is being sent.

White

Bluetooth is enabled.

Off

Bluetooth is disabled or not installed.

Connectivity

Bluetooth

8

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer

Names and Descriptions of Front Icons (Continued) Icon

Name

Color

Description

Media

Red

Out of media or there is a problem with the media (jammed, not loaded correctly). If the printer has a label taken sensor installed and enabled, this icon indicates that a label has been printed but not yet removed.

Off

Media is available and loaded correctly.

Configuration Error

Red

There is a printer configuration problem.

Off

There are no configuration problems.

Red

Ribbon is out or there is a problem with the ribbon.

Off

Ribbon is not having any problems or the printer is not configured to use ribbon.

Red

The printhead is too hot.

Off

The printhead temperature is normal and the printer is ready for printing.

Red

Printhead is lifted.

Off

Printhead is lowered.

Red

There is a printer problem not associated with one of the other icons.

Off

There are no general errors.

White

The printer is paused.

Ribbon

Printhead Hot

Printhead Lifted General Error

Pause Maintenance

Off

The printer is not paused.

Amber

Maintenance is required and a lifetime odometer setting has been reached.

Flashing amber

The firmware is being upgraded, the printer is recovering or restoring the firmware, or the printer is calibrating. Once the process is complete, the printer will turn off.

Off

No maintenance is required.

PM43 and PM43c Mid-Range Printer Manual

9

Chapter 1 — About the Printer

About the Full Touch Display Front The full touch display front contains a 3.5-inch touch and a keypad for entering information or navigating through the interface.

The Full Touch Display Front on a PM43 Printer

The full touch screen is a resistive touch that s touch input with fingers, gloved hands, or a stylus. You only need to touch the screen once to make a selection. Use the keys on the front to enter information into the screen or to navigate the Main Menu if the touch screen is not working properly. Both the PM43 and the PM43c contain these keys on the front : 0 to 9, Enter, . (period), - (minus), Clear, F1 to F5, and an Orange (Shift) key.

10

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer

Shortcut Keys on the Full Touch Display Keypad Navigation

Shortcut Keys

Enter the Main Menu

. (period)/- (minus)

Arrow Up

8

Arrow Down

2

Arrow Left

4

Arrow Right

6

Enter in Menu Enter button Break in Fingerprint Application Orange + C

About the Ready Screen After you turn the printer on, the Ready screen appears when the printer finishes starting up.

PM43 and PM43c Ready Screen

Note: Icons for Wi-Fi and Bluetooth status appear only when the optional Wi-Fi/Bluetooth module is installed. The IP address appears when the printer is connected to an Ethernet or wireless network. If there is no Ethernet or wireless connection, serial port information appears on the screen.

PM43 and PM43c Mid-Range Printer Manual

11

Chapter 1 — About the Printer

By default, the information bar at the bottom of the screen shows the printer command language and the printer IP address. You will see the time and current date only if the real time clock (RTC) is installed. You can customize the screen as necessary to show different kinds of information. The status bar at the top of the screen includes these icons: Information and Status Icon Descriptions Icon

Description of Icon Printer Information icon. Press the icon to view printing related settings and system information. Wireless Connection icon. This icon appears when the Wi-Fi/ Bluetooth module is installed in the printer and indicates the strength of the wireless network connection: - Strong. - Good. - Weak. - No signal. - 802.11 is turned off. Press the icon to view status and signal strength. Data transfer icon. Blinks when data is moving through an interface connection to the printer. Press the icon to view detailed information on the connection. Bluetooth icon. This icon appears when the Wi-Fi/Bluetooth module is installed in the printer and indicates whether the Bluetooth module is enabled or disabled: - Bluetooth is turned on. - Bluetooth is turned off. Press the icon to view detailed Bluetooth information or to use the Bluetooth wizard.

12

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer

About the Main Menu In the printer Ready screen, press

to view the Main Menu.

Press one of the buttons to select the Programs, Settings, Tools, or Wizards menu: •

Select Programs to see a list of programs installed on the printer. This list includes utility programs provided by Intermec as part of the printer firmware, and programs you have installed on the printer. The Programs item appears in the Main Menu only if the printer is using Fingerprint or Direct Protocol as the command language.

• •

Select Settings to view and change printer settings. Select Tools to print test labels, manage a connected USB storage device, restore printer default settings, or save and load printer profiles. Select Wizards to see a list of wizards that help you configure printing or communication settings, or calibrate the media sensors.

•

Note: The printer cannot print while the Main Menu is onscreen. You need to exit the Main Menu and return to the Ready screen to begin printing.

PM43 and PM43c Mid-Range Printer Manual

13

Chapter 1 — About the Printer

About Navigating in the Main Menu Use the status bar buttons to navigate between menus and save changes. Main Menu Buttons and Descriptions Button

Description Returns to the Main menu. Goes back up one level in the menu. Returns to the Ready screen. Saves the configuration changes. Moves between options in a setting menu. Moves to additional options not viewable in the menu.

Use the horizontal scroll bar for settings with options you can select. Use the onscreen keypads to enter data for the settings.

About the Onscreen Keypads You can use the onscreen alphanumeric or numeric keypads to make changes to your settings.

Alphanumeric Keypad

14

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer

Numeric Keypad

Extended Numeric Keypad

For all keypads: • Press to delete the last character you entered. • Press the available keys to enter your information. For the alphanumeric and extended numeric keypad: • •

Press 123 or ABC to toggle between the alphabetic and numeric keys. In the alphabetic keypad, press to toggle between uppercase and lowercase letters.

PM43 and PM43c Mid-Range Printer Manual

15

Chapter 1 — About the Printer

In the numeric keypad, press to toggle between shifted and unshifted key characters. For example, press the up arrow to toggle between $ and # in the numeric keypad. When you are finished typing, press to return to the menu and then save your information.

•

About the Printer Wizards The full touch printer firmware includes several wizards you can use to quickly set up your printer. The available wizards depend on the hardware you have installed in the printer. You can start all of the wizards from the Main Menu except for the startup wizard. The startup wizard appears the first time you turn on the printer and after the printer has been reset to the factory default state.

Printing Wizards

16

Wizard

Description

Media Setup

Select media and printing type (DT or TTR), media width, length, and X-margin, Start and Stop Adjust values, and print speed.

Print Quality

Prints a series of labels to determine the best print quality setting.

Loading Media

Shows how to load media.

Loading Ribbon

(TTR printers only) Shows how to load ribbon.

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer

Communications Wizards Wizard

Description

Line Analyzer

Logs all incoming data on all communications channels and saves the data to a log file. For experienced s.

Wireless 802.11

Looks for wireless networks and sets up Wi-Fi communications. Available when Wi-Fi/Bluetooth module is installed.

Bluetooth

Looks for discoverable Bluetooth devices and sets up Bluetooth communications. Available when WiFi/Bluetooth module is installed.

Calibration Wizards Wizard

Description

Media

Calibrates the label gap sensor and shows current print settings.

Screen

Calibrates the touch screen.

RFID

Calibrates the optimal label adjustment and output power setting for the RFID media loaded in the printer. Available when the RFID module is installed.

Label Taken Sensor

Calibrates the label taken sensor used with the label dispenser. Available when the label taken sensor is installed.

PM43 and PM43c Mid-Range Printer Manual

17

Chapter 1 — About the Printer

About Printer Languages The printer uses the Intermec Fingerprint printer command language by default. You can load and run Fingerprint programs and send Fingerprint commands or Direct Protocol print jobs directly to the printer. The printer s these command languages: • Direct Protocol (DP) • IPL (Intermec Printer Language) • ZSim (ZPL command language simulator) • DSim (DPL command language simulator) You can change the default printer command language through the printer web page, the Main Menu, or PrintSet.

Select a Command Language from the Web Page If you are not going to use Fingerprint as the printer command language, follow this procedure to change the command language from the printer web page. Note: To use this procedure, the printer must be connected to your Ethernet or wireless network. 1 Open a web browser on your PC. 2 In the address bar, type the IP address of your printer and press Enter. The printer web page appears. 3 Click . The page appears. 4 Type your name and and then click . The default value for name is it and the default value for is . 5 Click the Configure tab. 6 Click System Settings > General.

18

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer

7 Select a different printer command language from the Command Language list and then click Save. 8 Select to reboot from the web page or turn the printer off and on. The printer starts up in the command language you selected.

Select a Command Language From the Main Menu If you have a full touch printer, you can use this procedure to change the printer command language from the Main Menu. 1 From the Ready screen, press the Main Menu button. 2 From the Main Menu, press Settings > System Settings > General. 3 Scroll down until you reach Command Language. 4 Use the horizontal scroll bar to select the command language you want to use and then save your change. 5 Turn the printer off and then on. The printer starts up in the command language you selected.

Printer Options and Accessories You can use these printer options and accessories (sold and ordered separately) with the PM43 and PM43c printers. Most options are either installed at the factory or can be installed by factory service technicians in the field. Accessories are designed to be installed by the customer.

PM43 and PM43c Options and Accessories Option or Accessory

Description

Airline Boarding

Use the airline boarding option to print boarding es from fanfold media. The airline boarding option includes a ticket shelf, media guides, and an extended tray. Use the collapsible core accessory to easily remove ribbon from the takeup hub.

Collapsible Core

PM43 and PM43c Mid-Range Printer Manual

19

Chapter 1 — About the Printer

PM43 and PM43c Options and Accessories (Continued) Option or Accessory

Description

Cutter

Use the cutter option to cut media into individual labels. Cutter Tray Use the optional cutter tray accessory to collect the cut-off labels. Dome Cover (PM43c) Use the dome cover on the PM43c to accommodate large rolls of media and protect the inside of the printer from dust and debris. Dual USB Host Port Board Use the dual USB host port board to add the ability to connect multiple USB devices to the printer. DUART Board Use the DUART board to add two UART ports on the back of the printer. Extended Base with Full Use the extended base option with the Label Roll Rewinder PM43 printer to be able to rewind a full roll of labels. Industrial Use the Industrial interface + UART Interface+UART board board to make a UART port on the back of the printer. Label Dispenser with Use the label dispenser to peel labels from Rewinder the backing and present the labels one at a time for application. Label Taken Sensor Use the label taken sensor with the label dispenser option to detect when labels are removed from the printer and another can be printed. Large Edge Guide Use the large edge guide to make sure that large rolls of media stay on the hanger. Media Cover Lock (PM43) Use the media cover lock on the PM43 to make sure the media cover remains closed with an external lock. Parallel IEEE 1284 Use the parallel interface board to make a Interface board parallel port on the back of the printer. Real Time Clock Use the real time clock to keep track of the current time on the printer. 20

PM43 and PM43c Mid-Range Printer Manual

Chapter 1 — About the Printer

PM43 and PM43c Options and Accessories (Continued) Option or Accessory

Description

RFID Module

Use the RFID module to be able to print on RFID media. Rotating Media Supply Use the rotating media supply hub with Hub media that has a 76 mm (3 in) core. The hub option also includes a paper low sensor. Short Cover (PM43c) Use the short cover on the PM43c to accommodate large rolls of media. Touchless Configuration Use the touchless configuration option to be able to configure the printer from an RFID reader (IP30). Wi-Fi+Bluetooth Module Use the Wi-Fi+Bluetooth module to be able to communicate with your printer wirelessly.

PM43 and PM43c Mid-Range Printer Manual

21

Chapter 1 — About the Printer

22

PM43 and PM43c Mid-Range Printer Manual

2 Set Up the Printer

Use this section of the manual to learn what you need to do to set up the printer. You will find information about loading media and ribbon, printing a test label, calibrating the full touch screen, and adjusting the printer.

23

Chapter 2 — Set Up the Printer

About Media The PM43 and PM43c printers can print on labels, tickets, tags, and continuous stock. The procedure you use to load media depends on how you are operating the printer and the options you have installed.

Load Media for Tear-Off Printing Use this section to load media when you want to manually tear off labels against the tear bar on the printer. You can use these types of media for tear-off printing: • Non-adhesive continuous stock • Self-adhesive continuous stock with liner • Self-adhesive labels with liner • Tickets with gaps, with or without perforations • Tickets with black marks, with or without perforations You can install an optional label taken sensor that detects when the current label is removed and prints the next label. 1 Open the media cover. 2 Turn the printhead lift lever counterclockwise to raise the printhead.

24

PM43 and PM43c Mid-Range Printer Manual

Chapter 2 — Set Up the Printer

3 Load a media roll onto the media supply hub. Make sure you push the roll all the way against the inner wall of the printer and adjust the edge guide.

4 Route the media through the print mechanism. The dashed line in this illustration shows the path to load media with the takeup hub installed.

5 Turn the printhead lift lever clockwise to close the printhead.

PM43 and PM43c Mid-Range Printer Manual

25

Chapter 2 — Set Up the Printer

6 Close the media cover. 7 Press the Print button to advance the media. If you are switching to a new type of media, you need to calibrate the sensors on the printer.

Load Media for the Label Dispenser If you have the optional label dispenser installed in your printer, the printer will separate self-adhesive labels from the liner. The label taken sensor causes the printer to wait for you to remove a label before printing the next one. You can also install the internal media rewinder if you want to rewind the liner. 1 Open the media cover. 2 Turn the printhead lift lever counterclockwise to raise the printhead.

26

PM43 and PM43c Mid-Range Printer Manual

Chapter 2 — Set Up the Printer

3 Load a media roll onto the media supply hub. Make sure you push the roll all the way against the inner wall of the printer and adjust the edge guide.

4 Pull down on the label dispenser lever to open the media path.

5 Route the media through the print mechanism and out the front of the printer.

PM43 and PM43c Mid-Range Printer Manual

27

Chapter 2 — Set Up the Printer

6 Insert the media in the opening between the label dispenser and the platen roller. You can pull the liner through the dispenser and out the bottom of the mechanism or you can route the liner around the internal media rewinder (if installed).

7 Pull the liner tight and push the label dispenser lever back into the closed position. 8 Turn the printhead liftlever clockwise to close the printhead. 9 Close the media cover. 10 Press the Print button to advance the media. If you are switching to a new type of media, you need to calibrate the sensors on the printer.

28

PM43 and PM43c Mid-Range Printer Manual

Chapter 2 — Set Up the Printer

Load Media from an External Supply You can place the media supply, such as fanfold tickets or tags, behind the printer or underneath it. 1 Open the media cover. 2 Turn the printhead lift lever counterclockwise to raise the printhead.

PM43 and PM43c Mid-Range Printer Manual

29

Chapter 2 — Set Up the Printer

3 Feed media through the slot in the back of the printer (or from the slot in the bottom of the printer) and route it through the print mechanism.

4 Turn the printhead lift lever clockwise to close the printhead. 5 Close the media cover. 6 Press the Print button to advance the media. If you are switching to a new type of media, you need to calibrate the sensors on the printer.

Load Ribbon Thermal transfer printing provides a durable printout that is less vulnerable to chemicals, heat, and sunlight than direct thermal printing. Make sure you select a ribbon type that matches the media you are using and that you configure the printer for thermal transfer media.

30

PM43 and PM43c Mid-Range Printer Manual

Chapter 2 — Set Up the Printer

The printer s thermal transfer ribbon rolls with the ink-coated side facing either inward or outward. To determine which type of ribbon you have, use a pen or other sharp object to scratch through the ribbon against a piece of paper. If you see a mark on the paper, your ribbon is wound ink out.

*OLJO

*OLPVU

Determining Whether Your Ribbon is Wound Ink In or Ink Out

1 Open the media cover. 2 Turn the printhead lift lever counterclockwise to raise the printhead. 3 Slide the ribbon roll onto the ribbon supply hub and slide the empty ribbon core onto the ribbon takeup hub.

PM43 and PM43c Mid-Range Printer Manual

31

Chapter 2 — Set Up the Printer

4 For ribbon that has the ink wound out, place the ribbon on the supply hub with the ribbon wound clockwise. For ribbon that has the ink wound in, place the ribbon on the supply hub with the ribbon wound counterclockwise. 5 Route the ribbon through the print mechanism and pull out approximately 20 cm (8 inches) of ribbon leader. The dotted line in this illustration shows how to load ribbon with the ink wound in.

6 Turn the ribbon takeup hub counterclockwise until the ribbon becomes tight and runs wrinkle-free through the print mechanism. 7 Turn the printhead lift lever clockwise to lower the printhead. 8 Close the media cover.

32

PM43 and PM43c Mid-Range Printer Manual

Chapter 2 — Set Up the Printer

Connect the Printer to Power The full touch printer goes through a startup wizard the first time you turn on the power. The icon printer goes through an LED startup sequence the first time you turn on the power. 1 Connect one end of the power cord to the back of the printer and connect the other end to AC power.

2 Press the power switch to turn on the printer. As the printer starts up: •

a progress bar appears on the full touch interface. When the printer has finished starting up, the startup wizard appears. After you complete the startup wizard, you can choose to complete more wizards or you can go to the Ready screen.

the icons turn on and then turn off one at a time on the icon printer. When the printer has finished starting up, the blue Ready-to-Work indicator turns on and stays on. If a condition occurs that will prevent printing, the Ready-to-Work indicator blinks. •

PM43 and PM43c Mid-Range Printer Manual

33

Chapter 2 — Set Up the Printer

About Test Labels Print a test label after you have loaded media and ribbon to that you have installed everything correctly and also to get some important information about your printer. The way you print a test label is slightly different between the full touch and the icon printer. Please use the procedure for your printer.

Print a Test Label with the Icon Printer When you turn on the icon printer, all of the LEDs on the display light up including the Ready-to-Work indicator. One by one, the LEDs turn off as the printer starts up. The first LED to turn off is the Ready-toWork indicator. The LEDs then turn off following a sequence from the top left LED to the bottom right LED. 1 Connect the printer to power and turn on the printer. 2 The printer goes through its startup sequence and all of the LEDs light up. When the last two LEDs are lit (Printhead Hot and Maintenance), press and hold the Print button until the test label starts to print. 3 Release the Print button. The series of three test labels prints out.

Print a Test Label with the Full Touch Printer The first time you turn on the full touch printer or reset to factory defaults, the printer runs a startup wizard to let you enter basic setup information. After the startup wizard finishes, the printer enters Ready mode where you can choose to access the Main Menu and print a test label. 1 Connect the printer to power and turn on the printer. 2 After the startup sequence finishes, the startup wizard begins. After you enter all of the information on the wizard screens, click No when prompted to run other wizards. 3 From the Ready screen, tap the Main Menu button on the status bar. 34

PM43 and PM43c Mid-Range Printer Manual

Chapter 2 — Set Up the Printer

4 From the Main Menu, tap Tools > Test Labels. 5 Select the test label you want to print and tap it. Your test label prints. If print quality is low, go to Wizards > Printing > Print Quality.

Calibrate the Screen If you are having problems with the full touch screen responding when you tap it, you may need to calibrate the screen. 1 On the keypad, press ./- to enter the Main Menu. 2 Press 2 until the Wizard button is selected and then press Enter. 3 Press 2 until Calibration is selected and then press Enter. 4 Press 2 until Screen is selected and then press Enter. 5 Tap the calibration points on the screen until the screen goes blank. The touch screen then finishes the calibration process and returns you to the Ready screen.

Create and Print Labels You can use Intermec printer software to design and print labels with the PM43 and PM43c printers. You can label design software and printer drivers from http://www.intermec.com / products/printers_media/software/index.aspx. You can also use Fingerprint and IPL to create and print labels. For more information, see either the Intermec Fingerprint Command Reference Manual or the IPL Command Reference Manual.

PM43 and PM43c Mid-Range Printer Manual

35

Chapter 2 — Set Up the Printer

Print on RFID Media Media containing RFID tags is slightly thicker where the RFID tag is located. The slight thickness of this part of the label may affect print quality. For thermal transfer labels, Intermec recommends using highquality ink ribbon. To achieve the best possible print quality, follow these guidelines: •

• •

After you load RFID media, restart the printer or run the RFID calibration wizard on a full touch printer. To start the RFID calibration wizard, go to Wizards > Calibration > RFID. If necessary, modify the TAGADJUST variable to make sure the RFID labels are properly aligned with the antenna. If necessary, avoid printing on the thickest part of the label.

For help configuring RFID parameters, see the Intermec Fingerprint Command Reference Manual or the IPL Command Reference Manual.

36

PM43 and PM43c Mid-Range Printer Manual

3 Connect the Printer

Use this chapter to connect the printer to a PC or to a network. You can use the printer web page or the Main Menu on a full touch printer to configure the settings.

37

Chapter 3 — Connect the Printer

About Connecting the Printer to Your PC You can connect the printer to your PC using one of these cables: • • •

Serial cable USB cable IEEE 1284 parallel printer adapter cable (optional)

Connect the Printer Using a Serial Cable You can use a serial connection to communicate with your PC and to run PrintSet or InterDriver. You can also use the serial port to send commands directly to the printer through a terminal connection. Before you can establish a serial connection, make sure the settings on the PC match those of your printer. Serial Port Settings on the Printer Parameter

Default Setting

Baud Rate

115200

Data Bits

8

Parity

None

Stop Bits

1

Hardware

Disable

ENQ/ACK

Disable

XON/XOFF

Disable

XON/XOFF From

Disable

New Line Character

CR/LF

1 Connect one end of the DB9 to DB9 RS-232 cable to the back of your printer and connect the other end of the cable to a serial COM port on the PC. 2 If necessary, change the PC serial port configuration to match your printer.

38

PM43 and PM43c Mid-Range Printer Manual

Chapter 3 — Connect the Printer

Connect the Printer Using a USB Cable Intermec recommends that you only connect one printer to your PC, either directly or through a hub. To connect the printer to a PC through the USB device port, you need: a USB Type A to USB Type A cable. Intermec InterDriver ® software. To make sure you have the latest version of InterDriver, go to the website at http://www.intermec.com/products/pswinterdriver /index.aspx. To connect the printer to your PC using a USB cable:

• •

1 and install the InterDriver software on your PC. 2 Connect one end of the USB cable to the back of the printer and connect the other end to your PC. You do not need to set up any parameters for USB communications.

Connect the Printer Using an IEEE 1284 Cable If you want to use a parallel port on the printer, you can choose to have the IEEE 1284 parallel port installed either at the factory or by an authorized Intermec service technician. You can use the parallel port with InterDriver. The parallel port s Universal Plug and Play (UPnP), compatibility, nibble, byte, E, and additional status reporting through IEEE 1284 nibble ID mode. If you are using a parallel port to communicate with the printer, you need: • an IEEE 1284 interface adapter installed in the printer. • a parallel cable to run between the printer and the PC. To connect the printer to your PC using an IEEE 1284 cable: •

Connect the IEEE 1284 cable connector to the interface adapter port on the back of the printer and connect the other end of the cable into a parallel port on the PC.

PM43 and PM43c Mid-Range Printer Manual

39

Chapter 3 — Connect the Printer

Install Printer Drivers Before you can use the printer with a Windows PC, you need to install printer driver software on the PC. Drivers enable the printer to communicate with your PC and with software applications such as Intermec PrintSet. Use InterDriver to install printer driver software on your PC. InterDriver is available from the Intermec website. Follow this procedure to InterDriver from the Intermec website and install the drivers. Note: Although Windows may auto-detect the printer when you connect it to a PC through a USB port, you must still install printer drivers on the PC for correct printer operation. 1 Open a web browser and go to www.intermec.com. 2 Select > s. 3 Select these items: a In the Product Category list, select Printers. b In the Product Family list, select Printer Software. c

In the Product list, select InterDriver and then click Submit.

4 In the InterDriver s page, click InterDriver - Windows ver. X.XX . If a Security Warning dialog box appears, click Run. 5 Select I accept the in the license agreement and then click Next twice. 6 Clear the Read installation instructions check box, and then click Finish. If a control dialog box appears, click Yes to continue. InterDriver extracts the installation files to C:\Intermec\InterDriver7\ on your PC and starts InterDriver Wizard. 7 Make sure that Install printer drivers is selected, and then click Next. 8 Make sure that Install a driver for a Plug and Play printer is selected.

40

PM43 and PM43c Mid-Range Printer Manual

Chapter 3 — Connect the Printer

9 Select your printer model from the list, and then click Next. Be sure you select the correct printhead size (203 or 300 dpi), printer language, and so on. 10 (Optional) Type a new Printer Name to change the default printer name. You can also select Use this printer as the default printer to have Windows automatically select this printer when you print documents from your desktop PC. To share this printer with other s, select Share name and type a name for the printer. When you are finished, click Next. 11 Click Finish to install the printer drivers, and then click Close to exit InterDriver Wizard.

About Connecting the Printer to Your Network You can connect the printer to your network using the: • integrated Ethernet interface. • optional Wi-Fi + Bluetooth wireless interface. These network interfaces provide features such as security, FTP server, web server, and Alert handling.

Connect the Printer to an Ethernet Network Use the Ethernet port to set up the PM43 or PM43c as a network printer. The printer is set to automatically retrieve an IP number from the network (DH) when you turn on the printer. You can use the network connection with InterDriver. You can also use it to directly send commands to the printer through a terminal connection (Telnet), or you can send instructions through FTP. 1 Turn the printer off. 2 Connect the Ethernet cable to the Ethernet port in the rear of the printer and connect the other end of the cable to your network.

PM43 and PM43c Mid-Range Printer Manual

41

Chapter 3 — Connect the Printer

3 Turn the printer on. If your printer uses a DH server to assign IP addresses, the IP address appears in the lower left corner of the screen. For an icon printer, use Intermec PrintSet to retrieve the printer IP address. If you are not using a DH server to automatically assign IP addresses to devices in your network, you must set a static IP address and other network information manually. Continue with the next step. •

4 For a non-DH network: •

For a full touch printer, from the Main Menu select Settings > Communications > Ethernet > IPv4 or IPv6 and change the settings as needed.

•

For an icon printer, configure the Ethernet settings through PrintSet.

IPv4 and IPv6 Ethernet Settings Setting

Default

(IPv4) IP Assignment Method

DH

(IPv4) IP Address

0.0.0.0

Subnet Mask

0.0.0.0

Default Router

0.0.0.0

DH Response

Broadcast

(IPv6) IP Assignment Method

Automatic

(IPv6) IP Address

Automatic

About Wireless Communications The printer s wireless communications when the optional Wi-Fi/Bluetooth module is installed. You can configure wireless communications: • •

42

from the printer web page. from the printer Main menu if your printer has full touch display front . PM43 and PM43c Mid-Range Printer Manual

Chapter 3 — Connect the Printer

By default, the printer s DH networks. Note: If you are not using a DH network, you need to configure Wi-Fi settings by using Intermec PrintSet through a USB connection to the printer, by sending commands through a serial connection, or by using the wizards and settings menus on a full touch printer. For descriptions and default settings of wireless communications settings, See Appendix B.

Configure Wireless Communications from the Web Page Use this procedure to configure wireless communications from the printer web page. Note: To configure the printer from the web page, the printer must be turned on and connected to your Wi-Fi or Ethernet network. 1 Open a web browser on your PC. 2 In the address bar, type the IP address of your printer and press Enter. The printer web page appears. 3 Click . The page appears. 4 Type your name and and then click . The default value for name is and the default value for is . 5 Click the Configure tab. The Configuration Summary page appears.

PM43 and PM43c Mid-Range Printer Manual

43

Chapter 3 — Connect the Printer

6 Click Communications > Wireless 802.11. The Wireless 802.11 settings page appears.

7 Change wireless settings as needed. You can also click Default Settings to restore all default Wireless 802.11 settings. 8 Click Save when you are finished.

Configure Wireless Communications from the Main Menu If you have a touch printer, you can configure wireless communications using the Wireless 802.11 wizard. You can also configure wireless communications from the Main Menu. 1 From the Ready screen, press the Main Menu button. The Main Menu appears. 2 Select Settings > Communications > Wireless 802.11. 3 Change settings as needed for your wireless connection. 4 When you are finished, save your changes.

44

PM43 and PM43c Mid-Range Printer Manual

Chapter 3 — Connect the Printer

About Bluetooth Communications The printer s Bluetooth communications when the optional Wi-Fi+Bluetooth module is installed. When Bluetooth is enabled, you can use a Bluetooth bar code scanner to send scanned data directly to a Fingerprint application. You can also make the printer discoverable by other Bluetooth devices, and enable security if required. You can set up Bluetooth communications: • • •

from the printer web page. from the printer Main Menu. using Intermec PrintSet through a USB connection to a PC.

Connect to a Bluetooth Device If your printer has the full touch display, you can use the Bluetooth wizard to discover and connect to an HID Bluetooth device such as a keyboard or a Bluetooth scanner configured as an HID slave. 1 Make sure your Bluetooth device is turned on and discoverable, and that the device is in range of the printer. 2 From the printer Ready screen, select the Main Menu. 3 Select Wizards > Communications > Bluetooth. 4 Follow the instructions to discover and connect to your Bluetooth device. If you are unable to connect to the Bluetooth device, you may need to change the printer Bluetooth settings.

Configure Bluetooth Communications from the Web Page Use this procedure to configure Bluetooth from the printer web page. The printer must be connected to an Ethernet or wireless network and you must know the printer IP address. 1 Open a web browser on your PC. 2 In the address bar, type the IP address of your printer and press Enter. The printer web page appears. 3 Click . The page appears. PM43 and PM43c Mid-Range Printer Manual

45

Chapter 3 — Connect the Printer

4 Type your name and and then click . The default value for name is and the default value for is . 5 Click the Configure tab. The Configuration Summary page appears. 6 Click Communications > Bluetooth. The Bluetooth settings page appears.

7 Change Bluetooth settings as needed. You can also click Default Settings to restore all default Bluetooth settings. 8 Click Save when you are finished.

Configure Bluetooth Communications from the Main Menu Use this procedure to configure Bluetooth settings from the printer Main Menu. You may need to configure these settings if you want to connect to a mobile computer through Bluetooth. 1 From the Ready screen, press the Main Menu button. The Main Menu appears. 2 Select Settings > Communications > Bluetooth.

46

PM43 and PM43c Mid-Range Printer Manual

Chapter 3 — Connect the Printer

3 Change settings as needed for your Bluetooth device. 4 When you are finished, save your changes.

About the USB Host You can use the USB host interface port on the printer to connect these peripheral devices: • • • •

USB flash drive Keyboard Bar code scanner USB hub

Connect a USB Storage Device You can insert a USB storage device into the USB host port on the front of PM43 or into the USB host port on the back of the PM43 and PM43c printers. The USB storage device provides the ability to upgrade the firmware, install resources, export resources, print a file, and configure the printer. The USB storage device needs to be formatted as FAT16 or FAT32. When you insert a USB storage device into the printer, a USB Device menu appears:

PM43 and PM43c Mid-Range Printer Manual

47

Chapter 3 — Connect the Printer

48

PM43 and PM43c Mid-Range Printer Manual

4 Configure the Printer

Use this chapter to understand the organization of the configuration menu and the different ways you can configure the printer.

49

Chapter 4 — Configure the Printer

About the Printer Configuration Menus The structure of the printer configuration menus is consistent among the different interfaces. You should see the same organization whether you are accessing the menus through the web page or the printer Main Menu. There are five main printer configuration menus for each interface: • Communications • Printing • System Settings • Network Services • Alerts Use the following illustrations to understand where information is located in the printer configuration menus. Not all configuration items appear in each type of interface.

4FSJBM

$0.

&UIFSOFU

8JSFMFTT

*1W

$0.

#MVFUPPUI

(FOFSBM

4FDVSJUZ

4FDVSJUZ

%FWJDF/BNF

/FUXPSL

%JTDPWFS

*1"TTJHONFOU.FUIPE

$0.O *1"EESFTT

1BTTLFZ 4VCOFU.BTL

3FTFSWF %FGBVMU3PVUFS %)$13FTQPOTF

*1W

*1"TTJHONFOU.FUIPE *1"EESFTT

The Communications Menu

50

PM43 and PM43c Mid-Range Printer Manual

Chapter 4 — Configure the Printer

$0.

$0.

$0.O

#BVE3BUF

#BVE3BUF

#BVE3BUF

%BUB#JUT

%BUB#JUT

%BUB#JUT

1BSJUZ

1BSJUZ

1BSJUZ

4UPQ#JUT

4UPQ#JUT

4UPQ#JUT

)BSEXBSF

)BSEXBSF

)BSEXBSF

&/2"$,

&/2"$,

&/2"$,

90/90''5P

90/90''5P

90/90''5P

90/90'''SPN

90/90'''SPN

90/90'''SPN

/FX-JOF$IBSBDUFS

/FX-JOF$IBSBDUFS

/FX-JOF$IBSBDUFS

The Serial Communications Menu

PM43 and PM43c Mid-Range Printer Manual

51

Chapter 4 — Configure the Printer

(FOFSBM

4FDVSJUZ

/FUXPSL

/FUXPSL/BNF 44*%

4FDVSJUZ5ZQF

*OOFS"VUIFOUJDBUJPO

*1W

/FUXPSL5ZQF

"TTPDJBUJPO

$"$FSUJGJDBUF

3PBNJOH

1SF4IBSFE,FZ

$MJFOU$FSUJGJDBUF

1PXFS.PEF

/FUXPSL,FZ*OEFY

$MJFOU,FZ

$IBOOFM

/FUXPSL,FZ

4FSWFS$PNNPO/BNF

/FUXPSL,FZ

4FSWFS$PNNPO/BNF

/FUXPSL,FZ

7BMJEBUF$FSUJGJDBUF

/FUXPSL,FZ

1"$

6TFS/BNF

"RVJSF1"$

*1"TTJHONFOU.FUIPE

1BTTXPSE

'BTU3PBNJOH $$,.

*1"EESFTT

"OPOZNPVT/BNF

.JYFE.PEF (SPVQ5,*1

*1"TTJHONFOU.FUIPE *1"EESFTT 4VCOFU.BTL %FGBVMU3PVUFS

)JEEFO44*%

%)$13FTQPOTF

*1W

The Wireless 802.11 (Wi-Fi) Communications Menu

52

PM43 and PM43c Mid-Range Printer Manual

Chapter 4 — Configure the Printer

.FEJB

1SJOU2VBMJUZ

3'*%

$VUUFS

.FEJB5ZQF

1SJOU4QFFE

3FUSJFT

$VUUFS$POUSPM

1SJOU.FUIPE

.FEJB4FOTJUJWJUZ

7PJE5FYU

1BSUJBM$VU

.FEJB8JEUI

%BSLOFTT

3'*%5BH1PTJUJPO

.FEJB-FOHUI

$POUSBTU

0VUQVU1PXFS

.FEJB.BSHJO 9

$MJQ%FGBVMU 4UBSU"EKVTU 4UPQ"EKVTU .FEJB$BMJCSBUJPO.PEF -FOHUI 4MPX.PEF

-544FOTJUJWJUZ-FWFM

The Printing Menu

PM43 and PM43c Mid-Range Printer Manual

53

Chapter 4 — Configure the Printer

%JTQMBZ

(FOFSBM

"VEJP

4ZTUFN/BNF

#SJHIUOFTT

4ZTUFN-PDBUJPO

*EMF*OGPSNBUJPO

#MVFUPPUI

4ZTUFN$POUBDU

5JNF'PSNBU

7JSUVBM$0.

9.-3FTQPOTF.PEF

%BUF'PSNBU

3'*%

%JTQMBZ-BOHVBHF

.FOV"DDFTT

,FZBE*OQVU

1*/

5JNF

4DSFFO5JNFPVU

".1.

'FFE,FZ"DDFTT

%BUF $PNNBOE-BOHVBHF "MFSU/PUJGJDBUJPO.FUIPE 6OJUPG.FBTVSF

7PMVNF

.BOBHF*0

.BOBHF4FSWJDFT

8JSFMFTT

.BJOUFOBODF"MFSUT

8FC4FSWFS

0EPNFUFS 6TFS3FTFUUBCMF

'51

0EPNFUFS 1SJOUFS

"WBMBODIF

0EPNFUFS 1SJOUIFBE

/FU

3FQMBDF1SJOUIFBE

4NBSU4ZTUFNT

$MFBO1SJOUIFBE

4/.1

'BVMUZ%PU

$VUUFS

.FEJB-PX%JBNFUFS

-13

3JCO-PX%JBNFUFS

*,&W

-PX#BUUFSZ

44) 5FMOFU

The System Settings Menu

54

PM43 and PM43c Mid-Range Printer Manual

Chapter 4 — Configure the Printer

"WBMBODIF

%/4

/FU

4NBSU4ZTUFNT

.PEF

1SJNBSZ%/44FSWFS

4UBUVT

1PSU/VNCFS

4FSWFS"EESFTT

4FDPOEBSZ%/44FSWFS

2VFVF

4FSWFS"EESFTT

1PSU/VNCFS

1PSU/VNCFS

6TFS/BNF

/FX-JOF$IBSBDUFS

1BTTXPSE

3FNPUF1PSU 3FNPUF)PTU

&NBJM4FSWFS 4.51

4/.1

8*/4

.PEF

"VUIFOUJDBUJPO 'BJMVSF5SBQ

1SJNBSZ8*/44FSWFS

1PSU/VNCFS

3FBE$PNNVOJUZ

4FDPOEBSZ8*/44FSWFS

4FSWFS"EESFTT

8SJUF$PNNVOJUZ

'SPN"EESFTT

4/.1W4UBUVT

5SBQ$PNNVOJUZ/

5P"EESFTT

4/.1W4UBUVT

4/.1W6TFSOBNF

5SBQT4UBUVT/

4/.1W "VUIFOUJDBUJPO,FZ

5SBQ/BNF/

4/.1W&ODSZQUJPO,FZ

5SBQ"EESFTT/

4/.1W "VUIFOUJDBUJPO1SPUPDPM

5SBQ1PSU/VNCFS/

4/.1W &ODSZQUJPO1SPUPDPM

8FC4FSWFS

*NBHF#VGGFS

The Network Services Menu

PM43 and PM43c Mid-Range Printer Manual

55

Chapter 4 — Configure the Printer

&SSPS

8BSOJOH

*OGPSNBUJPO

0VUPG.FEJB

3JCO*OTUBMMFE

1SJOU+PC$PNQMFUF

0VUPG3JCO

.FEJB-PX

4UBSUFE

-BCFM/PU5BLFO

3JCO-PX

1SJOUFSJT3FPUJOH

1SJOUFSJO1BVTF.PEF

6QHSBEJOH'JSNXBSF

1SJOUFSJO.FOV.PEF

0EPNFUFS 6TFS3FTFUUBCMF

"QQMJDBUJPO#SFBL

0EPNFUFS $VSSFOU1SJOUIFBE

3'*%/PU*OTUBMMFE

0EPNFUFS 1SJOUFS

1SJOUIFBE-JGUFE

3FQMBDF1SJOUIFBE

1SJOUIFBE/PU%FUFDUFE

$MFBO1SJOUIFBE

1SJOUIFBE5PP)PU

'BVMUZ%PU

.PUPS5PP)PU 1PXFS4VQQMZ5PP)PU

The Alert Menu

Configure the Printer Using the Web Page If you are using Ethernet or Wi-Fi communications, you can change configuration settings from the web page of the printer. You should have already connected your printer to your network and obtained an IP address. 1 Open a web browser on your PC.

56

PM43 and PM43c Mid-Range Printer Manual

Chapter 4 — Configure the Printer

2 In the address bar, type the IP address of your printer and press Enter. The printer web page appears.

3 Click . The page appears. 4 Type your name and and then click . The default value for name is it and the default value for is . 5 Click Configure. The Configuration Summary page appears.

PM43 and PM43c Mid-Range Printer Manual

57

Chapter 4 — Configure the Printer

6 To see a complete list of printer settings, click Configuration Summary. To configure printer settings, click an item in the navigation pane: •

For serial, Ethernet, Wireless 802.11, or Bluetooth settings, click Communications.

•

For media or print quality settings, click Printing.

•

For display, audio, service, and general settings, maintenance alert message triggers, or to enable and disable 802.11 and Bluetooth, click System Settings.

•

To set conditions that trigger error, warning, and information alert messages, click Alerts.

For network-related settings (such as DNS, WINS, Net1), for web and email server information, or if you are using a network management application such as Intermec SmartSystems, click Network Services. 7 Make any changes to the settings you want to configure. •

8 To save your changes, click Save. To reset all parameters on the page to the default settings, click Default Settings.

58

PM43 and PM43c Mid-Range Printer Manual

Chapter 4 — Configure the Printer

Configure the Printer Using the Main Menu If you have a full touch printer, you can view or change the configuration settings by pressing the Settings button from the Main Menu. 1 From the Ready screen, press the Main Menu button. 2 From the Main Menu, press the Settings button. The Settings menu appears.

3 Select the settings you want to configure and make your changes. 4 Save your changes when prompted.

PM43 and PM43c Mid-Range Printer Manual

59

Chapter 4 — Configure the Printer

Restrict Access to the Main Menu By default, all menus are available from the Main Menu the first time you turn on the printer. If necessary, you can require a PIN to restrict access to menus or you can disable access to all menus. Menu Access Setting

Description

Enable (default)

All s can access the menus from the Main Menu and from the USB flash drive menu.

Enable with PIN

s need to enter a PIN to access the Main Menu or USB flash drive menu.

Disable

s cannot access the menus from the Main Menu or from the USB flash drive menu.

1 Go to the Display menu for the printer: •

From the web page, select Configure > System Settings > Display.

•

From the Main Menu on a full touch screen, select Settings > System Settings > Display.

2 Select a Menu Access setting and save your changes. 3 If you select Enable with PIN, you also need to type in a PIN and save your changes.

Configure the Printer with PrintSet PrintSet is a printer configuration tool that enables you to easily change your configuration settings. You can also use the setup wizards in PrintSet to guide you through common configuration tasks. 1 Make sure that you have Windows 2000 or later running on your PC. 2 PrintSet from the s page of the Intermec website at http://www.intermec.com/products/printers_media /software/index.aspx. 3 Connect your printer to your PC using a serial or USB cable.

60

PM43 and PM43c Mid-Range Printer Manual

Chapter 4 — Configure the Printer

Configure the Printer Using Programming Commands You can change configuration settings by sending programming commands directly from your PC to the printer through a terminal program (such as Hyperterminal) , a serial connection, or a network connection. If your printer uses the Fingerprint programming language, use the SETUP GET command followed by the node, subnode, and parameter setting. For example, here is a Fingerprint example that changes your media setting to labels with gaps: SETUP GET “MEDIA,MEDIA TYPE,LABEL (W GAPS)” You must as an it to perform a SET operation, but you do not need to to perform a GET operation. If your printer uses the IPL programming language, this example changes your media setting to labels with gaps: <STX><SI>T1<ETX> For more information on how to change configuration settings with a programming language, see either the Intermec Fingerprint Command Reference Manual or the Intermec Printer Language (IPL) Command Reference Manual.

Configure the Printer Using SmartSystems Foundation You can use SmartSystems Foundation to change configuration settings on your printer. The printer ships with the SmartSystems client loaded on it. The console is part of SmartSystems Foundation and is available from the Intermec website. To SmartSystems Foundation, go to www.intermec.com/products/smrtsysfoundation/index.aspx.

Configure the Printer Using Touchless Configuration You can use touchless configuration to configure a printer without turning it on or while it is in the box. If you have the touchless configuration option installed in your printer, an RFID tag receives and stores data from an external IP30 RFID reader and configures the settings when the printer is turned on. The air protocol ed is EPCGlobal Class 1 Gen 2. The available programmable memory is 384 bytes of memory bank. PM43 and PM43c Mid-Range Printer Manual

61

Chapter 4 — Configure the Printer

Touchless configuration s the configuration of these settings: • Command language • IPv4 Settings • Localized language • RS-232 • Paper type or label/media • SSID To write to a tag or read from a touchless configuration tag: 1 Hold the IP30 in a horizontal orientation. 2 Stand in front of the touchless configuration label and hold the IP30 within 10 cm of the packaging surface. 3 Execute the write or read command.

About ing Fonts, Images, Applications, Formats, and Web Pages You can use the printer web page, a USB storage device, or PrintSet to fonts, images, applications, formats, and web forms to the printer. You can only delete fonts, images, applications, and web forms that you to the printer. You cannot delete the files that are installed as part of the printer firmware.

Fonts, Images, Applications, Formats, and Web Forms from the Web Page You can use the printer web page to install fonts, images, applications, formats, and web forms to the printer. 1 Open a web browser on your PC. 2 In the address bar, type the IP address of your printer and press Enter. The printer web page appears. 3 Click . The page appears. 4 Type your name and and then click . The default value for name is it and the default value for is . 62

PM43 and PM43c Mid-Range Printer Manual

Chapter 4 — Configure the Printer

5 Click the Manage tab. The Overview page appears.

6 Click Applications, Fonts, Images, Label Formats, or Web Forms. The page appears for the option you selected. Here is an example of the page you see if you select to fonts.

PM43 and PM43c Mid-Range Printer Manual

63

Chapter 4 — Configure the Printer

7 To a file to the printer: a Click Browse to locate your file. b Double-click the file to select it. c

Click . The file s to the printer.

8 Click Save when you are finished.

Fonts, Images, Applications, Formats, and Web Forms from a USB Storage Device You can use a USB storage device to install fonts, images, applications, formats, and web forms to the printer. Use this table to understand where your files need to be located on the USB storage device for the printer to install them. File Type Directories for the USB Storage Device File Type

Directory to Place the File

Font

/fonts

Image

/images

Fingerprint Application

/scripts

Form/Layout

/forms

Web Form

/webforms

1 Copy your file(s) to a USB storage device using the directories in the table. 2 Insert the USB storage device into one of the USB host ports on the printer. 3 If you have an icon printer, the files are automatically ed to the printer. If you have a full touch printer, the USB Device menu automatically appears: a Select Install Resources. b Select the type of file you want to install. For example, select Fonts to install a font.

64

PM43 and PM43c Mid-Range Printer Manual

Chapter 4 — Configure the Printer

c

Select the file you want to install and wait until the item turns gray and a checkmark appears next to it. The file is now successfully installed in the printer.

d Continue to another file if you have more files to install.

About Printer Profiles After you change printer default settings to meet your needs, you can save those settings as a printer profile. The printer s multiple profiles that you can save and load at any time. For example, you can create one profile to use when you are printing on continuous label stock, and a different profile to use when you are printing on label stock with gaps. Printer profiles are only ed from the Main Menu on the full touch printer. The following printer settings are not saved in a profile: • • •

IP address for either IPv4 or IPv6 networks Media calibration settings for the label stop sensor Remote port or remote host values for a remote computer accessing the printer through raw T

PM43 and PM43c Mid-Range Printer Manual

65

Chapter 4 — Configure the Printer

Save a Printer Profile Use this procedure to save the current settings as a printer profile. 1 From the Ready screen, press the Main Menu button. The Main Menu appears. 2 Select Tools > Profiles. The Profiles menu appears.

3 Select Save. The Save Profile menu appears. 4 Select the Filename text box and type a name for the profile. The profiles can have up to sixteen characters. 5 Press on the SIP to save your profile name and go back to the Save Profile menu.

66

6 Press

and wait until Complete appears on the screen.

7 Press

to return to the Main Menu.

PM43 and PM43c Mid-Range Printer Manual

Chapter 4 — Configure the Printer

Load a Printer Profile Use this procedure to load a saved printer profile on the full touch printer. 1 From the Ready screen, press the Main Menu button. The Main Menu appears. 2 Select Tools > Profiles. The Profiles menu appears.

3 Select Load. The Load Profile menu appears. 4 Select the profile you want to load on the printer and press 5 When Complete appears on the screen, press Main Menu.

.

to return to the

Install or Export a Configuration File You can save the current configuration of the printer and export it to a USB storage device for use in other printers. You can also install a configuration file from another printer using a USB storage device. 1 From the Ready screen, press the Main Menu button. The Main Menu appears. 2 Select Tools > USB Menu. 3 Select Configuration.

PM43 and PM43c Mid-Range Printer Manual

67

Chapter 4 — Configure the Printer

4 To export a configuration file from the printer memory to the USB storage device, select Export Configuration. A list of the available files appears. To import a configuration file from the USB storage device to the printer memory, select Install Configuration. A list of the available files appears. 5 Select the file you want to export or install. 6 Press OK when the export or install confirmation box appears.

Customize the Printer Web Page The printer web page visual presentation is specified using a CSS (Cascading Style Sheet). You can customize the look of the web page by modifying the CSS. The printer web page internally loads the default style.css prior to loading the customized style.css. The customized style.css does not need to contain the complete set of CSS directives, it may only specify the subset of CSS styles that the wishes to customize. 1 Retreive the default CSS file from the printer: http://<printerip>/format/style.css. 2 Modify the style sheet to make the web page look the way you want it and save your changes. 3 the style sheet to the printer using this FTP to printer path: /home//webpage/style.css.

68

PM43 and PM43c Mid-Range Printer Manual

5 Troubleshoot the Printer Use this chapter to troubleshoot the printer.

69

Chapter 5 — Troubleshoot the Printer

Call Product If you cannot find the answer to your problem in the “Troubleshooting” section, go to the Intermec technical knowledge base (Knowledge Central) at intermec.custhelp.com to review technical information or to request customer . If you still need help after visiting Knowledge Central, call Product . To talk to an Intermec Product representative in the U.S.A. or Canada, call: 1-800-755-5505 Outside the U.S.A. and Canada, go to www.intermec.com and click Us to find your local Intermec representative. Before you call Intermec Product , make sure you have this information ready: • Printer serial number • Printer configuration number • Firmware type and version • Printer command language • Wireless or serial port settings • Installed options • Media settings • Ethernet settings • Bluetooth settings You can find all of this information on the printer web pages or on a test label.

70

PM43 and PM43c Mid-Range Printer Manual

Chapter 5 — Troubleshoot the Printer

About Printer System Information Look in the System Information tab in the printer web pages for useful information and statistics on the printer hardware and firmware. You may need this information if you want to Intermec Product for assistance or troubleshooting.

System Information Tab in Printer Web Pages

PM43 and PM43c Mid-Range Printer Manual

71

Chapter 5 — Troubleshoot the Printer

View Printer Statistics Use the printer web page to view important statistics on the printer. You can view everything from printer uptime to the images installed in the printer. Printer Statistics Available on the Web Page Statistic Type

Information Available

SystemInformation

Printer uptime and U usage, firmware and kernel versions, printer config and serial numbers, flash and RAM memory information

Print Statistics

Total labels printed, RFID tag success rate, odometer values, total distance printed (printer and current printhead)

Supply

Printhead and ribbon information

Hardware Options

Input/output devices, serial port information

Network Interfaces

MAC address, T/IP, Bluetooth, and 802.11 network information

Font Information

Name, type, location, and size of installed fonts

Bar Code Information

Name and type of installed bar code fonts

Image Information

Name, type, location, and size of installed images

1 Open a web browser on your PC. 2 In the address bar, type the IP address of your printer and press Enter. The printer web page appears. 3 Click the System Information tab.

72

PM43 and PM43c Mid-Range Printer Manual

Chapter 5 — Troubleshoot the Printer

4 Click Statistics > System Information. The System Information page appears.

5 For more detailed statistics, click another choice in the Statisics list.

Check the Printer Odometer You can check the odometer from the printer web page to see the printhead usage and how the current values compare to the alert values. Note: To check the printer odometer from the web page, the printer must be turned on and connected to your Wi-Fi or Ethernet network. 1 Open a web browser on your PC. 2 In the address bar, type the IP address of your printer and press Enter. The printer home page appears. 3 Click the System Information tab. 4 Click Odometer. The list of current odometer statistics appears.

PM43 and PM43c Mid-Range Printer Manual

73

Chapter 5 — Troubleshoot the Printer

Set Maintenance Alerts You can set maintenance alerts to determine the threshold or value at which an alert is sent to you. For example, you can set a value in millimeters printed at which the printer triggers an alert telling you that it is time to clean the printhead. 1 Open a web browser on your PC. 2 In the address bar, type the IP address of your printer and press Enter. The printer web page appears. 3 Click . The page appears. 4 Type your name and and then click . The default value for name is and the default value for is . 5 Click the Configure tab. The Configuration Summary page appears. 6 Click System Settings > Maintenance Alerts. The Maintenance Alerts settings page appears.

7 Type the values you want to set for each maintenance alert. 8 Click Save when you are finished.

74

PM43 and PM43c Mid-Range Printer Manual

Chapter 5 — Troubleshoot the Printer

About Alerts To help maintain the printer, you can configure the printer to send alert messages when certain conditions occur. For example, the printer can send a message when the odometer reaches a certain value, or if the printhead is lifted during printing. There are three types of alerts: • Error alerts • Information alerts • Warning alerts You configure alert settings in the printer web page. Alert messages can be sent to an email address, an SNMP trap, or both. You can enable or disable each type of alert, set the number of times the alert is repeated, set the unit of measure that determines how often the alert is sent, and change the default text message for the alert.

Configure Error Alert Notification The way you receive error alerts is determined by the notification method you configure. You can choose between receiving notifications by SNMP trap, email, or SNMP trap + email. To configure the way you are notified about error alerts: • •

From the printer Main Menu, select Settings > System Settings > General > Alert Notification Method. From the printer web page, and then click the Configure tab > System Settings > General > Alert Notification Method.

PM43 and PM43c Mid-Range Printer Manual

75

Chapter 5 — Troubleshoot the Printer

Maintenance and Error Alerts Use these tables to understand and troubleshoot some common error alerts you may receive and how to fix them. Error Alert

Solution

Label Not Taken

Printing has been stopped because a label is obstructing the label taken sensor. Remove the label to resume printing.

Printhead Lifted

Lower the printhead.

Out of Ribbon

Load ribbon in the printer.

Out of Media

Load media in the printer.

Ribbon Low

The diameter of the remaining roll of media is lower than the specified value in the Ribbon Low Diameter setting. Replace the ribbon.

Media Low

The diameter of the remaining roll of media is lower than the specified value in the Media Low Diameter setting. Replace the media.

Ribbon Installed

The printer is configured as a direct thermal printer and thermal transfer ribbon is installed. Remove the ribbon or configure the printer for thermal transfer media.

Printer in Pause Mode A print job is paused from the front . Press the Print button to resume printing. Printer in Menu Mode A entered a menu from the front . Press the Home button to return to the Ready screen. Application Break

Fingerprint only. An application breaks uncontrolled.

Print Job Complete

A print job has been successfully completed.

Odometer (Printer)

The printer has reached a limit set in the Odometer (Printer) setting in Maintenance Alerts for the amount of media to print before being alerted.

Odometer (Printhead) The printhead has reached a limit set in the Odometer (Printhead) setting in Maintenance Alerts for the amount of media to print before being alerted. Odometer ( Resettable)

76

The printer has reached a limit set in the Odometer ( Resettable) setting in Maintenance Alerts for the amount of media printed since the last reset.

PM43 and PM43c Mid-Range Printer Manual

Chapter 5 — Troubleshoot the Printer Error Alert

Solution

Printhead Too Hot

The printhead is overheated and needs to cool down. Wait for printing to resume automatically.

Printhead Not Detected

The printer is not detecting the printhead. Check to make sure the printhead is installed and that the printhead cable is firmly connected to the printhead.

Faulty Dot

The printhead has reached the number of faulty dots set in the Faulty Dots setting in Maintenance Alerts. You may need to replace the printhead.

Replace Printhead

The printer has reached a limit set in the Replace Printhead setting in Maintenance Alerts for the amount of media to print before replacing the printhead. Replace the printhead.

Clean Printhead

The printer has reached a limit set in the Clean Printhead setting in Maintenance Alerts for the amount of media to print before cleaning the printhead. Clean the printhead.

No RFID Tag Found

The printer can not find an RFID tag.

RFID Not Installed

You are attempting to write to a tag, but the printer does not RFID. You must install the RFID module in the printer to be able to write to RFID tags.

Upgrading Firmware

The printer is going to start upgrading the firmware. Do not try to send anything to the printer.

Printer is Rebooting

The printer is going to restart. Wait until the printer is ready before attempting to communicate with it.

Started

The printer is in the process of starting up.

Motor Too Hot

The printer motor has reached its maximum operating temperature limit. Let the motor cool down before you resume printing.

PM43 and PM43c Mid-Range Printer Manual

77

Chapter 5 — Troubleshoot the Printer

Troubleshoot Printer Problems and Find Solutions Use this section to find possible solutions to printer problems. Print Quality Problems and Possible Solutions Problem

Possible Solution

The printout is weak.

Try these possible solutions in order:

• Make sure that your media setting is appropriate for hte type of media you are using. • The contrast may be too low. Increase the contrast. • The printhead pressure may be too low. Increase the printhead pressure. • Replace the printhead. The printout is weaker on one side.

Adjust the printhead balance.

There are weak spots on the printout.

Try these possible solutions in order:

• There may be foreign particles on the media. Clean or replace the media. • Make sure that your media and ribbon are compatible. • Make sure that you are using high quality media and ribbon. • The contrast may be too low. Increase the contrast.

The printout is dark or there is Try these possible solutions in order: excessive bleeding on the media. • Make sure your media setting is appropriate for the type of media you are using. • The contrast may be too high. Decrease the contrast. • The printhead pressure may be too high. Decrease the printhead pressure. • The printhead voltage may be incorrect or the energy control may be faulty. For help, your Intermec representative. 78

PM43 and PM43c Mid-Range Printer Manual

Chapter 5 — Troubleshoot the Printer

Print Quality Problems and Possible Solutions (Continued) Problem

Possible Solution

There are dark lines along the media path.

The printhead may be dirty. Clean the printhead.

There are white vertical lines on the printout.

Try these possible solutions in order:

• The printhead may be dirty. Clean the printehead.

• There may be missing dots on the printhead. Replace the printhead. Part of a dotted line is missing.

Try these possible solutions in order:

• The printhead may be failing. Replace the printhead.

• The strobe signal may be failing. For help, your Intermec service representative. The inner edge of the printout is Try these possible solutions in order: missing. • The media may not be properly installed or aligned. Reload the media. • The media margin or X-start parameter may be set too low. Increase the setting. The content on my printout is compressed.

The print speed may be too high. Lower the print speed.

Nothing shows up on my thermal The ink-coated side of the ribbon may not transfer printout. be facing the media. Reload the ribbon. When I feed or print a label, the Make sure the Print Method is set to ribbon is not taken up. Instead, it Ribbon (TTR) . spills out the front of the printer. The ribbon breaks.

Try these possible solutions in order:

• Make sure your media setting is appropriate for the type of media you are using. • Make sure that the ribbon is fitted correctly. Reload the ribbon. • The energy control may be faulty. For help, your Intermec Service representative.

PM43 and PM43c Mid-Range Printer Manual

79

Chapter 5 — Troubleshoot the Printer

Print Quality Problems and Possible Solutions (Continued) Problem

Possible Solution

The ribbon wrinkles.

Try these possible solutions in order:

• The ribbon tension bar may not be adjusted correctly. Use a large straight-slot screwdriver to adjust the ribbon tension bar. • You may need to adjust the media edge guide. • The printhead pressure may be too high. Decrease the printhead pressure.

Networking Problems and Possible Solutions Problem

Possible Solution

The Ethernet or wireless network Try these possible solutions: connection is not working • Make sure your network cable is correctly. securely connected to your printer and a straight “pin-to-pin” cable, not a “crossover” cable. • Make sure your PC is correctly configured for and connected to your network. • Make sure your printer is correctly configured for your network. I cannot connect to the printer web page.

If you are connecting your printer with a crossover network cable, you may need to disable the web browser’s proxy settings on your computer to access the printer web page.

RFID Problems and Possible Solutions Problem

Possible Solution

The printer has RFID media After you load RFID media, restart the loaded, but it is not writing to the printer to let the printer identify the tags. RFID media type or run the RFID calibration wizard.

80

PM43 and PM43c Mid-Range Printer Manual

Chapter 5 — Troubleshoot the Printer

RFID Problems and Possible Solutions (Continued) Problem

Possible Solution

The RFID module is installed in The printer is not communicating the printer, but “RFID” does not properly with the RFID hardware. For appear in the menu. help, your local Intermec representative. None of the RFID commands work.

RFID is disabled. Enable RFID from the web page or the Main Menu. Go toSettings (Main Menu) or Configure tab (web page) > System Settings > Manage I/O.

Printing on regular media (not RFID) is slow and halted in between labels.

RFID is enabled. Disable RFID from the web page or the Main Menu.

I am using an application to write • The printer may not recognize the to RFID tags and the printer is RFID media type. Restart the printer printing “VOID” labels. or run the media or RFID calibration wizard. • You may need to modify the TAGADJUST parameter. • You may need to adjust the output power (field strength) to the antenna. I receive this message “No RFID tag found.”

• Make sure you are using RFID media. • You may need to modify the TAGADJUST parameter.

• The tag may be broken. Try printing on a different label. When I send a TAGREAD or TAGWRITE command, I get this error message: “Tag format error.”

PM43 and PM43c Mid-Range Printer Manual

The TAGFORMAT defined for the operation determines the number of required parameters. You may need to modify the TAGFORMAT. For help, see the Intermec Fingerprint Command Reference Manual or the IPL Command Reference Manual. For more information, see the EPC Tag Data Standard (v1.1, revision 1.27) available from the EPCglobal web site at www.epcglobalinc.org.

81

Chapter 5 — Troubleshoot the Printer

About Restoring Printer Defaults If you need to restore factory defaults on the printer, you can use the printer web page, a hardware-based reset on the icon printer, or the Main menu on a full touch printer. From the printer web page and the Main Menu on a full touch printer, you can choose to restore default network settings, keep or delete -installed files, and to restore all system settings.

Restore Defaults from the Printer Web Page You can restore the defaults of your printer from the printer web page if you are connected to a Wi-Fi or Ethernet network. 1 Start a web browser on your desktop PC. 2 In the address field, type the printer IP address and press Enter. The printer web page appears. 3 Click in the upper right corner of the screen. The page appears. 4 Type your name and in the text fields and click . 5 Select Services > Restore Defaults. The Restore Defaults menu appears with none of the check boxes selected. 6 To restore all default settings, select all of the check boxes and then click Restore. You can also restore only the defaults for specific settings: •

To restore the current network settings, select the Network settings check box.

•

To restore all applications, fonts, and other files you have installed on the printer, select the files check box.

To restore all current system settings, select the System Settings check box. 7 When you receive a message to reboot the printer on your desktop PC, click OK and restart the printer. •

82

PM43 and PM43c Mid-Range Printer Manual

Chapter 5 — Troubleshoot the Printer

Restore Defaults from the Main Menu If you have a printer with a full touch display, you can restore the printer to default settings from the Tools menu. 1 From the Ready screen, open the Main Menu. 2 Select Tools > Restore Defaults. The Restore Defaults menu appears with all items in the list selected by default. 3 To restore all default settings, continue with the next step. You can also change the settings that are restored as follows: •

To keep the current network settings, clear the Network settings check box.

•

To keep all applications, fonts, and other files you have installed on the printer, clear the files check box.

To keep all current system settings, clear the System Settings check box. 4 Tap the right arrow and when prompted tap Yes to restore default settings and reboot. A confirming message appears. •

To return to the Main Menu without restoring the default settings, select No. To return to the Restore Defaults list without restoring any defaults, select Cancel.

Restore Defaults on an Icon Printer You can restore the printer defaults on an icon printer by performing a hardware-based reset. 1 Turn the printer off and open the media cover. 2 Turn the printhead lift lever counterclockwise to raise the printhead. 3 Turn the printer on while pressing and holding the Feed button. All of the default settings are restored on the printer. 4 Turn the printhead lift lever clockwise to lower the printhead and close the media cover.

PM43 and PM43c Mid-Range Printer Manual

83

Chapter 5 — Troubleshoot the Printer

About Upgrading the Printer Firmware You should check for periodic updates to the printer firmware. Updated firmware can include bug fixes or additional features that you might find useful. The latest version of the firmware is available from the PM43 or PM43c printer s page on www.intermec.com. You can upgrade the printer firmware using: • •

the printer web page. a USB storage device.

the Printer Firmware Update Before you can upgrade the printer firmware, you need to the upgrade file from the Intermec web site. 1 Go to the Intermec website at www.intermec.com. 2 Click > s. 3 Use Product Category, Product Family, and Product to select the PM43 or PM43c. 4 Click Submit. The latest software appears on the page. 5 the latest firmware version to your PC.

Upgrade Firmware from the Printer Web Page You can upgrade the printer firmware from the printer web page. To configure the printer from the web page, the printer must be turned on and connected to your Wi-Fi or Ethernet network. 1 On your PC, open a browser. 2 In the Location or Address field, type the printer IP address and press Enter. The printer web page appears. 3 Click in the upper right corner of the screen. The page appears. 4 Type your name and in the text fields and click .

84

PM43 and PM43c Mid-Range Printer Manual

Chapter 5 — Troubleshoot the Printer

5 Click the Services tab and then select Firmware Upgrade. The Firmware Upgrade screen appears, showing the current firmware version. 6 Click Browse to locate the upgrade file, select it, and then click Open. 7 Click Upgrade. The printer web page shows that it is upgrading firmware on your printer.

Upgrade Firmware from a USB Storage Device You can upgrade the printer firmware from a USB storage device. You must place the upgrade file in the root directory on the USB storage device. Note: For best results, Intermec recommends using a USB storage device that contains no other files besides the upgrade file. 1 Copy the firmware upgrade file to the root directory of the USB storage device. 2 Turn the printer off. 3 Insert the USB storage device into a USB host port. 4 Restart your printer. An upgrading firmware message appears as the upgrade file is loaded into the printer memory. This process may take a few minutes. 5 Remove the USB storage device.

PM43 and PM43c Mid-Range Printer Manual

85

Chapter 5 — Troubleshoot the Printer

86

PM43 and PM43c Mid-Range Printer Manual

6 Maintain the Printer

Use the information in this section to understand how to clean, adjust, and replace parts of the printer.

87

Chapter 6 — Maintain the Printer

About Cleaning the Printer To properly maintain the printer, you should clean it regularly. You can clean these parts of the printer: • • •

The printhead The media guides The exterior of the printer

Caution: To avoid possible personal injury or damage to the printer, never insert any pointed or sharp objects into the printer.

Caution: Use only the cleaning agents specified in this section. Intermec is not responsible for damage caused by any other cleaning materials used on this printer. Caution: Isopropyl alcohol is a highly flammable, moderately toxic, and mildly irritating substance. Follow these guidelines for cleaning the printer: • • •

88

Always remove the power cord before cleaning. Never spray the printer with water. Protect it from water when cleaning the premises. Never use any sharp tools for removing stuck labels. The printhead and rollers are delicate.

PM43 and PM43c Mid-Range Printer Manual

Chapter 6 — Maintain the Printer

Clean the Printhead Cleaning the printhead on a regular basis is important for the life of the printhead and for the print quality. You should clean the printhead each time you replace the media. Follow this procedure to clean the printhead using the cleaning card. If you need to clean additional residue from the platen roller or tear bar, use a cotton swab moistened with isopropyl alcohol. Caution: Never use hard or sharp tools to peel away stuck labels for other material. The printhead is delicate and can easily be damaged. 1 Turn the printer off and disconnect the printer from power. 2 Open the printer and remove the media and ribbon (if installed). 3 Insert most of the cleaning card under the printhead, and then lower the printhead. 4 Pull out the cleaning card and raise the printhead. 5 Wait for approximately 30 seconds to allow the cleaning fluid to dissolve the residue. 6 Repeat Steps 3 through 5 if necessary. 7 If necessary, clean residue from the platen roller or tear bar with a cotton swab moistened with isopropyl alcohol. 8 Once the parts are dry, replace the media (and ribbon) in the printer. 9 Close the printer, reconnect power, and turn on the printer.

PM43 and PM43c Mid-Range Printer Manual

89

Chapter 6 — Maintain the Printer

Clean the Media Guides Both the upper and lower media guides are transparent to allow light to between the two parts of the label gap and label mark sensors. It is important to keep these surfaces free of dust, stuck labels, and adhesive residue. 1 Turn the printer off and disconnect the printer from power. 2 Open the media cover. 3 Remove the media and ribbon (if installed). 4 Insert a cleaning card or a soft cloth soaked in isopropyl alcohol between the two media guides to clean them. 5 Wait for approximately 30 seconds to allow the cleaning fluid to dissolve the residue. 6 Once the parts are dry, replace the media (and ribbon) in the printer. 7 Close the media cover, reconnect power, and turn on the printer.

Clean the Exterior of the Printer Make sure to keep the exterior of the printer clean. Maintaining a clean exterior will reduce the risk of dust or foreign particles reaching the inside of the printer and affecting printer functionality. Use a soft cloth, possibly moistened with water or a mild detergent, when cleaning the printer exterior. Make sure to keep the surface surrounding the printer clean as well.

90

PM43 and PM43c Mid-Range Printer Manual

Chapter 6 — Maintain the Printer

Replace the Printhead You need to replace the printhead periodically when it wears out due to the rapid heating and cooling process used during printing. How often you need to replace the printhead depends on factors such as what type of images you print, the type of media or ribbon you use, the amount of energy to the printhead, the print speed, and the ambient temperature of the room you print in. The firmware detects the new printhead when you restart the printer. 1 Turn the printer off and disconnect the printer from power. 2 Open the media cover. 3 Remove the media and ribbon (if installed). 4 Turn the printhead lift lever counterclockwise to raise the printhead. 5 Detach the magnetic pressure arm from the printhead bracket and disconnect the two cables from the printhead as you remove it from the printer.

PM43 and PM43c Mid-Range Printer Manual

91

Chapter 6 — Maintain the Printer

6 Connect the two printhead cables to the new printhead.

7 As you insert the new printhead bracket into the printer, make sure the metal arms on the printhead go around the magnetic pressure arm bar. Attach the magnetic pressure arm to the printhead. 8 Replace the media (and ribbon) in the printer. 9 Turn the printhead lift lever clockwise to lower it. 10 Close the media cover, reconnect power, and turn on the printer.

Replace the Platen Roller If the printer platen roller gets damaged or wears out, it is easy to replace. On the PM43 printer, you can store a spare platen roller in the holder located under the media holder. Just insert the platen roller as you would into the printer and then turn the latch counterclockwise to secure it to the printer base. 1 Turn the printer off and disconnect the printer from power. 2 Open the media cover. 3 Remove the media. 4 Turn the printhead lift lever counterclockwise to raise the printhead. 92

PM43 and PM43c Mid-Range Printer Manual

Chapter 6 — Maintain the Printer

5 Rotate the platen roller latch clockwise to detach it from the printer and pull the platen roller away from the printer.

6 Insert the new platen roller into the printer and secure it by turning the latch counterclockwise. 7 Reload media and turn the printhead lift lever clockwise to lower it. 8 Close the media cover, reconnect power, and turn on the printer.

About Adjusting the Printer You may need to adjust your printer to accommodate how you are printing or to improve printer performance. You can make these adjustments on the printer: • • • •

Ribbon wrinkling Printhead balance Printhead pressure Label gap sensor and label mark sensor

PM43 and PM43c Mid-Range Printer Manual

93

Chapter 6 — Maintain the Printer

Prevent Ribbon Wrinkling If you have problems with the thermal transfer ribbon getting wrinkled, try adjusting the ribbon tension bar. 1 Open the media cover. 2 Use a large straight-slot screwdriver to adjust the ribbon tension bar:

94

•

Turn the tension bar screw clockwise to move the bar backward and decrease the tension.

•

Turn the tension bar screw counterclockwise to move the bar forward and increase the tension.

PM43 and PM43c Mid-Range Printer Manual

Chapter 6 — Maintain the Printer

Adjust the Printhead Balance If your labels are printing lighter on one side than the other, you probably have an unbalanced printhead. The printer is adjusted at the factory for full-width media. If you are using media that is less than full-width (4 inches or 102 mm), Intermec recommends that you adjust the position of the printhead balance arm so that the printhead is correctly pressured against the media. 1 Open the media cover. 2 If you have thermal transfer ribbon installed, remove it. 3 Turn the printhead lift lever counterclockwise to raise the printhead.

4 Press down on the blue part of the printhead balance bar and move it: •

outward for wider media.

•

inward for narrower media.

5 Close the printhead and load the ribbon. 6 Test and readjust the printhead balance if necessary. 7 Close the media cover.

PM43 and PM43c Mid-Range Printer Manual

95

Chapter 6 — Maintain the Printer

Adjust the Printhead Pressure You may need to adjust the printhead pressure on the printer if: • you are using thicker or thinner media than previously. • your labels are printing ligher on one side than the other. • your thermal transfer ribbon starts to crease. Do not use a higher printhead pressure than necessary. It may increase the wear on the printhead and shorten its life. 1 Open the media cover. 2 Use a straight-slot screwdriver to adjust the pressure screw.

•

Turn the screw clockwise to increase the pressure resulting in darker print.

•

Turn the screw counterclockwise to decrease the pressure resulting in lighter print.

3 Test and readjust the printhead pressure if necessary.

96

PM43 and PM43c Mid-Range Printer Manual

Chapter 6 — Maintain the Printer

Adjust the Label Gap and Black Mark Sensor The label gap sensor is a transmissive sensor that controls how the printer feeds media by detecting gaps between the labels. The black mark sensor is a reflective sensor that detects black marks on continuous media. The sensor contains a blue LED which is strong enough to see through media. You can use the blue LED to help determine the proper location for the sensor. 1 Open the media cover. 2 Adjust the label gap and black mark sensor: •

Turn the sensor adjustment knob counterclockwise to move the sensor toward the outside of the printer.

•

Turn the sensor adjustment knob clockwise to move the sensor toward the inside of the printer.

3 Close the media cover.

PM43 and PM43c Mid-Range Printer Manual

97

Chapter 6 — Maintain the Printer

98

PM43 and PM43c Mid-Range Printer Manual

A Specifications

This appendix contains specifications for the PM43 and PM43c printers.

99

Appendix A — Specifications

Printer Specifications Physical Specifications PM43 Dimensions:

294.6 x 284.2 x 483.5 mm (11.6 x 11.2 x 19 in) 181 x 252.5 x 431.8 mm (7.13 x 9.9 x 16.9 in)

PM43c Dimensions: (Standard Media Cover) 244.9 x 252.5 x 500.2 mm (9.6 x 9.9 x 19.7 in) PM43c Dimensions: (Dome Media Cover) PM43 Weight: 15.8 kg (35 lbs) PM43c Weight: 12.7 kg (28 lbs)

Power Specifications Power Supply Requirements:

100–240 V, 4 A, 50/60 Hz

Temperature and Humidity Specifications Operating Temperature: Storage Temperature: Relative Humidity:

5°C to 40°C (41°F to 104°F) -20°C to 70°C (-4°F to 158°F) 20 to 80% non-condensing

PM43 Print Speed, Resolution, and General Media Specifications Print Mode: Print Speed (variable):

Print Resolution:

100

Thermal Transfer or Direct thermal 203 dpi:100 to 300 mm/sec (4 to 12 ips) 300 dpi: 100 to 300 mm/sec (4 to 12 ips) 406 dpi: 100 to 250 mm/sec (4 to 10 ips) 203 dpi: 8 dots/mm 300 dpi: 11.8 dots/mm 406 dpi: 16 dots/mm

PM43 and PM43c Mid-Range Printer Manual

Appendix A — Specifications

PM43 Print Speed, Resolution, and General Media Specifications (Continued) Print Width:

Media Width: Label Roll Diameter (maximum): Label Roll Core (ID): Label Length (minimum): Gap Length Between Labels: Black Mark Length:

Media Thickness: Media Density:

203 dpi: 108 mm (4.52 in) max 300 dpi: 106 mm (4.17 in) max 406 dpi: 104 mm (4.09 in) max 19.05 to 114.3 mm (0.75 to 4.50 in) 212.70 mm (8.38 in) 76.20 mm (3 in) or 38.1 mm (1.50 in) 6.35 mm (.25 in) 1.2 to 26 mm (0.05 to 1.02 in) 3 to 25 mm (0.12 to 0.98 in) centered between tickets, 15% maximum reflectance 61 to 264 μm (2.40 to 10.40 mil)

57.60 to 250 g/m2 Liner Opacity (maximum): 76% (TAPPI T425) Ribbon Width: 21.59 to 110 mm (0.85 to 4.33 in) 80 mm (3.15 in) Ribbon Roll Diameter: (maximum) Ribbon Core (I.D.): 25.4 (1 in) Ribbon Core Length: 21.59 to 110 mm (0.85 to 4.33 in) Gap and Black Mark Sensor: Adjustable from left edge to101.6 mm (4 in)

PM43c Print Speed, Resolution, and General Media Specifications Print Mode: Print Speed (variable):

PM43 and PM43c Mid-Range Printer Manual

Thermal Transfer or Direct thermal 203 dpi:100 to 300 mm/sec (4 to 12 ips) 300 dpi: 100 to 300 mm/sec (4 to 12 ips) 406 dpi: 100 to 250 mm/s (4 to 10 ips)

101

Appendix A — Specifications

PM43c Print Speed, Resolution, and General Media Specifications (Continued) Print Resolution:

203 dpi: 8 dots/mm 300 dpi: 11.8 dots/mm 406 dpi: 16 dots/mm Print Width: 203 dpi: 108 mm (4.52 in) max 300 dpi: 106 mm (4.17 in) max 406 dpi: 104 mm (4.09 in) max Media Width: 19.05 to 114.3 mm (0.75 to 4.5 in) Label Roll Diameter 152.4 mm (6 in) with standard cover (maximum): 212.70 mm (8.38 in) with dome cover Label Roll Core (I.D.): 76.20 mm (3 in) or 38.1 mm (1.50 in) Label Length (minimum): 6.35 mm (.25 in) Gap Length Between Labels: 1.20 to 26 mm (0.05 to 1.02 in) Black Mark Length: 3 to 25 mm (0.12 to 0.98 in) centered between tickets, 15% maximum reflectance Media Thickness: 61 to 264 μm (2.40 to 10.40 mil) Media Density: 57.60 to 250 g/m2 Liner Opacity (maximum): 76% (TAPPI T425) Ribbon Width: 21.59 to 110 mm (0.85 to 4.33 in) Ribbon Roll Diameter: 62 mm (2.44 in) (maximum) Ribbon Core (I.D.): 25.4 (1 in) Ribbon Core Length: 21.59 to 110 mm (0.85 to 4.33 in) Gap and Black Mark Sensor: Adjustable from left edge to101.6 mm (4 in)

Memory • 128 MB Flash • 128 MB SDRAM • USB memory device (optional)

102

PM43 and PM43c Mid-Range Printer Manual

Appendix A — Specifications

Touch Screen Specifications • 3.5 inch, portait orientation • 262,000 colors • Resistive display that s touch input with fingers, gloved hands, or a stylus • 72 pixels per inch

ed Command Languages • • • • •

Fingerprint Direct Protocol Intermec Printer Language (IPL) ZSim DSim

Media Sensors • • • • • •

Label gap/tag notch Black mark Printhead lift Media low Ribbon present/end (thermal transfer models only) Ribbon low (with rotational hangar option)

PM43 and PM43c Mid-Range Printer Manual

103

Appendix A — Specifications

Network Services • • • • • • • • • • • • • •

FTP HTTP Server SNMP v1/2c/3 SNMP client for IPv4 and IPv6 WINS for IPv4 BOOTP for IPv4 DNS client for IPv4 and IPv6 Line Printer Protocol Raw T (Telnet in/out) DH client for IPv4 and IPv6 network (dual stack) IPv4 and IPv6 Ping IPSEC/IKEv2 over IPv6 SSH

ed Fonts • • • • • • • • • •

Andale Mono Andale Mono Bold Century Schoolbook Roman CG Times CG Times Bold Letter Gothic Univers Univers Bold Univers Condensed Bold Univers Extra Condensed

ed Font Types • TrueType • OpenType • Bitmap

104

PM43 and PM43c Mid-Range Printer Manual

Appendix A — Specifications

ed Bar Code Symbologies 1D bar code symbologies: • • • • • • • • • • • • • • •

Codabar Code 11 Code 39 Code 93 Code 128 DUN-14/16 EAN HIBC 39 HIBC 128 Industrial 2 of 5 Interleaved 2 of 5 ISBT-128 Matrix 2 of 5 Straight 2 of 5 UPC

2D bar code symbologies: • • • • • • • • • • • • • • • •

Aztec Code 16K Code 49 Data Matrix Dot Code Grid Matrix MaxiCode MicroPDF417 MSI (modified Plessey) PDF417 Planet Plessey Postnet QR Code RSS-14 USPS 4-State Customer Bar Code

ed Graphic File Types • PCX, PNG, GIF, and BMP

Windows Drivers • for Windows XP, Vista, Windows 7, Server 2003, Server 2008 • s 32-bit and 64-bit editions

PM43 and PM43c Mid-Range Printer Manual

105

Appendix A — Specifications

Interface Specifications Use this section to understand the standard interfaces available on the PM43 and PM43c printers.

RS-232 Serial Interface Use this table to understand the default settings of the serial port. Default Settings of the Serial Port Parameter

Default Setting

Baud rate

115200

Data bits

8

Parity

None

Stop bits

1

Hardware

Disable

The printer end of the serial cable is a DB9 pin and the PC end is dependent on the model of the desktop computer.





RS-232 Serial Cable DB9 Pins

Pin

Signal

1

Description External +5 VDC, Max 500 mA

2

TXD

Transmit data

3

RXD

Receive data

GND

Ground

CTS

Clear to send

4 5 6 7

106

PM43 and PM43c Mid-Range Printer Manual

Appendix A — Specifications Pin

Signal

Description

8

RTS

Request to send

9

USB Device Interface You connect a cable with a Type A connector and a Type B connector from your PC to the printer. The Type A connector plugs into the PC and the Type B connector plugs into the printer.

USB Type A Connector

USB Type B Connector

To use the USB interface to print from a PC, you need to have the Intermec InterDriver printer driver installed on your PC. Intermec recommends that you only connect one printer to each USB port on the PC, either directly or through a hub. You cannot connect other devices, such as a keyboard or a mouse, to the same hub.

USB Host Interface Use the USB host device to connect USB devices to the printer such as HID bar code scanners, keyboards, USB storage devices, and USB hubs.





USB Host Interface

PM43 and PM43c Mid-Range Printer Manual

107

Appendix A — Specifications

USB Host Interface Pins and Descriptions Pin

Description

1

VBUS

2

D-

3

D+

4

Gnd

Ethernet Interface The Ethernet interface has an RJ-45 socket for use with a standard RJ-45 cable. The interface s 10/100 Mbps Fast Ethernet (10BASE-T, 100BASE-T) and is fully compliant with the IEEE 802.3u standard. You can find the network card MAC address on the back of the printer for a PM43 printer, and on inside the media cover on the base for the PM43c printer.

MAC Address Label Location on the PM43

108

PM43 and PM43c Mid-Range Printer Manual

Appendix A — Specifications

MAC Address Label Location on the PM43c

PM43 and PM43c Mid-Range Printer Manual

109

Appendix A — Specifications

110

PM43 and PM43c Mid-Range Printer Manual

B Default Settings

This appendix contains all of the default settings for the printer.

111

Appendix B — Default Settings

Default Configuration Use this appendix to view the default settings on the printer. The following tables list the default settings for the PM43 and PM43c printers. If you restore the printer to factory default settings, it will use the values listed here. The order of the settings reflects the organization of the printer web page and Main Menu.

Serial Port Settings This section describes the serial port settings. To view these settings: • •

From the printer Main Menu, select Settings > Communications > Serial > COM1. From the printer web page, click the Configure tab > Communications > Serial.

Note: These settings are not accessible unless the printer has a serial connection to a PC.

112

Setting

Description

Default

Baud Rate

Transmission speed in bits per second (bps) for the serial port.

115200

Data Bits

Number of bits that define a character or 8 byte.

Parity

Specifies how the printer checks the integrity of the transmitted data.

Stop Bits

1 Number of bits sent at the end of every character to allow the receiving signal hardware to detect the end of a character and to resynchronize with the character stream.

Hardware

Specifies if hardware flow control Disable (RTS/CTS) is used to manage the rate of data transmission between the device and the host.

ENQ/ACK

Disable Specifies if software flow control (ENQ/ACK) is used to manage the rate of data transmission between the device and the host.

None

PM43 and PM43c Mid-Range Printer Manual

Appendix B — Default Settings Setting

Description

Default

XON/XOFF To

Specifies if software flow control Disable (XON/XOFF) is used to manage the rate of data transmission to the host.

XON/XOFF From

Specifies if software flow control Disable (XON/XOFF) is used to manage the rate of data transmission from the host.

New Line Character

Defines the characters that the printer echoes to the host to indicate that it has moved to a new line.

CR/LF

Ethernet Settings This section describes the Ethernet IPv4 and IPv6 settings. To view these settings: • •

From the printer Main Menu, select Settings > Communications > Ethernet. From the printer web page, click the Configure tab > Communications > Ethernet.

Setting

Description

Default

(IPv4) IP Assignment Method

Specifies how the printer obtains an IP DH address.

(IPv4) IP Address Specifies the unique network-level 0.0.0.0 address that is assigned to each device in a T/IP network (IPv4). Subnet Mask

Specifies a number that defines the range of IP addresses that can be used in a T/IP network.

Default Router

Specifies the IP address of a router that 0.0.0.0 is used when a device sends a packet to another subnet or to an unknown destination.

DH Response

Specifies if the printer receives DH responses by broadcast or unicast.

(IPv6) IP Assignment Method

Specifies how the printer obtains an IP Automatic address (for IPv6 networks).

PM43 and PM43c Mid-Range Printer Manual

0.0.0.0

Broadcast

113

Appendix B — Default Settings Setting

Description

Default

(IPv6) IP Address Specifies the unique network-level Automatic address that is assigned to each device in a T/IP network (IPv6).

Wireless 802.11 General Settings This section describes the 802.11 general settings. To view these settings: • •

From the printer Main Menu, select Settings > Communications > Wireless 802.11 > General. From the printer web page, click the Configure tab > Communications > Wireless 802.11.

Setting

Description

Default

Network Defines the wireless network. To Name (SSID) communicate, all access points and wireless devices must have the same network name, which is case-sensitive.

INTERMEC

Network Type

Selects the radio behavior of the printer. Ad Infrastructure Hoc mode allows the printer to communicate directly with another printer. Infrastructure mode allows the printer to communicate through an access point.

Roaming

Off Controls the roaming inclination of the printer. The higher the level, the less inclined the printer is to switch access points based on the printer received signal strength (RSSI).

Power Mode Select the power management setting for the Constant radio. Constant Awake provides the highest Awake throughput but draws the most power. Power Saving conserves the most power but provides the lowest throughput. Fast Power Saving turns off components when they are not being used to draw less current. Channel

114

Sets the common channel that radios in Ad 1 Hoc mode use to transfer data. Range is 1 to 14.

PM43 and PM43c Mid-Range Printer Manual

Appendix B — Default Settings Setting

Description

Default

Hidden SSID

Determines if the radio is allowed to look for Disable SSIDs that have been hidden to prevent unauthorized devices from connecting to the wireless nework.

Wireless 802.11 Network Settings This section describes the 802.11 IPv4 and IPv6 settings. To view these settings: • •

From the printer Main Menu, select Settings > Communications > Wireless 802.11 > Network > IPv4 or IPv6. From the printer web page, click the Configure tab > Communications > Wireless 802.11.

Setting

Description

Default

(IPv4) IP Assignment Method

Sets how the printer obtains an IP address (for IPv4 networks).

DH

(IPv4) IP Address Sets the unique network-level address that is assigned to each device in an IPv4 network.

0.0.0.0

Subnet Mask

Sets a number that defines the range of 0.0.0.0 IP addresses that can be used in an IPv4 network.

Default Router

Sets the IP address of a router that is used when a device sends a packet to another subnet or to an unknown destination.

0.0.0.0

DH Response

Sets if the printer receives DH responses by broadcast or unicast.

Broadcast

(IPv6) IP Assignment Method

Sets how the printer obtains an IP address (for IPv6 networks).

Automatic

(IPv6) IP Address Sets the unique network-level address that is assigned to each device in an IPv6 network.

PM43 and PM43c Mid-Range Printer Manual

Automatic

115

Appendix B — Default Settings

Wireless 802.11 Security Settings This section describes the 802.11 security settings. To view these settings: • •

116

From the printer Main Menu, select Settings > Communications > Wireless 802.11 > Security. From the printer web page, click the Configure tab > Communications > Wireless 802.11.

Setting

Description

Default

Security Type

Selects the protocol the radio uses to None its identity and makes sure that it is authorized to communicate on the wireless network.

Association

Selects the security method that the Open/WEP radio uses to get access to the wireless network.

Pre-Shared Key

Defines the phrase that allows None the radio to authenticate over the wireless network (for both WPA and WPA2 security). Range is 8 to 64 characters.

Network Key Index

Selects the active network key to use 1 for WEP security. Range is 1 to 4.

Network Key 1, Network Key 2, Network Key 3, Network Key 4

Defines a network key that is used for Empty string WEP security. Keys are entered in ASCII or hexadecimal (preceded by 0x) format.

Name

Sets the name that the printer uses when logging in to the network. Range is 1 to 96 characters.



Sets the that the printer None uses when logging in to the network. Range is 1 to 96 characters.

Anonymous Name

Empty string Sets the outer EAP name that the printer uses for logging in to the network. Maximum length is 96 characters.

Inner Authentication

Selects the authentication method that is used when the EAP type is EAP-FAST, PEAP, or TTLS.

None

MSCHAPv2

PM43 and PM43c Mid-Range Printer Manual

Appendix B — Default Settings Setting

Description

Default

CA Certificate

intermec.pem Sets the name of the Certificate Authority (CA) that verifies the server certificate. This CA should be the same one that was used to sign the server certificate.

Client Certificate Sets the name of the client certificate None the printer uses to authenticate to the network using EAP-TLS. Maximum length is 128 characters. Client Key

Sets the private key the printer uses None for EAP-TLS. Maximum length is 128 characters. Use the certinstall.sh script to install the certificate correctly.

Server Common Name 1

Sets the certificate name that is on None the primary authentication server. If this value is none, then the value for Server Common Name 2 is used. Range is 1 to 96 characters.

Server Common Name 2

Sets the certificate name that is on None the secondary authentication server. If this value is none, then the value for Server Common Name 1 is used. Range is 1 to 96 characters.

Validate Certificate

Determines if the identity of the authentication server is verified using its certificate when using EAP-TTLS, PEAP, or EAP-TLS. Intermec recommends that you set Validate Certificate to Yes.

PAC

Sets the name of the Protected Access eap-fast.pac Credential (PAC) that is used for EAP-FAST authentication. The printer uses this file if Acquire PAC is on and the current installed PAC fails to authenticate the printer to the network.

Acquire PAC

Determines if automatic PAC file provisioning is on for EAP-FAST authentication.

PM43 and PM43c Mid-Range Printer Manual

No

On

117

Appendix B — Default Settings Setting

Description

Default

Fast Roaming (CCKM)

Determines if the printer can roam Disable from one access point to another without reauthenticating with the server. CCKM only works in wireless networks using LEAP.

Mixed Mode (Group=TKIP)

Determines if the printer can use either TKIP or AES for data encryption, depending on the configuration of the access point.

Disable

Bluetooth Settings This section describes Bluetooth settings for the printer. To view these settings: • •

From the printer Main Menu, select Settings > Communications > Bluetooth. From the printer web page, click the Configure tab > Communications > Bluetooth.

Setting

Description

Default

Security

Selects the level of security that is used Disable when pairing devices to the printer. If you select Authentication, you must enter a key. If you select Auth + Encrypt, you must enter a key and traffic is encrypted.

Device Name Sets the name that identifies the printer Printer model in the Bluetooth network. Maximum number and serial number. For length is 16 characters. example, PM43-104700001.

118

Discover

Determines if other Bluetooth devices can detect the printer.

Enable

key

Sets the key that is used when 1234 pairing Bluetooth devices to the printer. Range is 1 to 16 characters (case-sensitive).

PM43 and PM43c Mid-Range Printer Manual

Appendix B — Default Settings Setting

Description

Default

Reserve

Determines if the printer is exclusively Disable reserved for one Bluetooth device. The first Bluetooth device that connects with the printer locks out any other connection attempts.

Media Settings This section describes media settings for the printer. To view these settings: • •

From the printer Main Menu, select Settings > Printing > Media. From the printer web page, click the Configure tab > Printing > Media.

Note: If you are using an icon printer that is not on a network, you need to use PrintSet through a USB connection to configure media settings. Setting

Description

Default

Media Type

Selects the type of media that is loaded in the printer.

Media With Gaps

Print Method

Selects the method of printing that the printer is using.

Ribbon (TTR) for thermal transfer printers, or No Ribbon (DT) for direct thermal printers

PM43 and PM43c Mid-Range Printer Manual

119

Appendix B — Default Settings Setting

Description

Default

Media Width

Variable Sets the width of the printable area measured from the media margin (X) across the printhead. Unit of measurement is defined in the Unit of Measure parameter.



.FEJBXJEUI

INTERMEC 6001 36th Ave W Everett WA 98203

Media Length

Variable Sets the length of the printable area measured from one edge of the label to the edge that is closest to the printhead. Unit of measurement is defined in the Unit of Measurement parameter.



.FEJB MFOHUI

INTERMEC 6001 36th Ave W Everett WA 98203

120

PM43 and PM43c Mid-Range Printer Manual

Appendix B — Default Settings Setting

Description

Default

Media Margin (X)

Sets the width of the margin from Variable the left edge of the label along the printhead to the edge of the printable area. Unit of measurement is defined in the Unit of Measurement parameter. .FEJB NBSHJO 9





INTERMEC 6001 36th Ave W Everett WA 98203

Clip Default

Determines if the printer prints Off items outside the printable area of the label. When this is set to Off, the printer returns an error if any part of a bar code label cannot be printed because that part extends beyond the printable area. When this is set to On, the printer prints all bar code labels, but may also print unreadable, incomplete labels.

Start Adjust

0 Sets the length of media the printer feeds (positive value) or retracts (negative value) before printing a label. Unit of measurement is defined in the Unit of Measure parameter. Range is -9999 to +9999.

PM43 and PM43c Mid-Range Printer Manual

121

Appendix B — Default Settings Setting

Description

Default

Stop Adjust

0 Sets the length of media the printer feeds (positive value) or retracts (negative value) after printing a label. Unit of measurement is defined in the Unit of Measure parameter. Range is -9999 to +9999.

Media Calibration Mode

Selects the mode the printer uses Fast to calibrate media. Use Slow if the printer has trouble identifying gaps or marks in media.

Length (Slow Mode)

If Media Calibration Mode is set 0 to Slow, the printer prints the media length plus 10 mm. This value sets an additional amount of media to be printed. Unit of measurement is defined in the Unit of Measurement parameter. Range is 0 to 3200.

LTS Sensitivity Level

Sets the sensitivity of the label taken sensor. Range is 0 to 14. ed when the Cutter or Label Dispenser accessories are installed.

0

Print Quality Settings This section describes print quality settings. To view these settings: • •

122

From the printer Main Menu, select Settings > Printing > Print Quality. From the printer web page, click the Configure tab > Printing > Print Quality.

Setting

Description

Default

Print Speed

Sets how fast the printer prints labels. The unit of measure is defined in the Unit of Measure parameter.

100

Media Sensitivity

Sets the level of sensitivity of the media to the Variable printhead heat for media and ribbon.

PM43 and PM43c Mid-Range Printer Manual

Appendix B — Default Settings Setting

Description

Default

Darkness

Sets the image darkness for media and ribbon. Variable Adjust this parameter with the Media Sensitivity parameter. Range is 1 to 100.

Contrast

Adjusts the blackness of the printing on the label in 2% increments from -10% to +10%.

+0%

General System Settings This section describes general system settings. To view these settings: • •

From the printer Main Menu, select Settings > System Settings > General. From the printer web page, click the Configure tab > System Settings > General.

Setting

Description

Default

System Name

Sets the network identification name (WINS name) of the printer.

Printer model number and serial number. For example, PM43-104700001.

System Location

Sets the location of the printer.

Empty string

System

Sets the name of the printer .

Empty string

XML Response Mode Determines if the printer provides XML responses to printing requests (over Telnet and HTTP).

False

Display Language

(LCD printers only) Selects the language the printer uses to display text on the screen.

English

Display Language (Web Page)

Selects the language the printer uses to display text on the web page.

English

Keyboard Input

Selects the language of the external keyboard that is connected to the printer.

U.S./U.K.

Time

Sets the current time.

System time

AM/PM

Sets AM or PM.

AM

PM43 and PM43c Mid-Range Printer Manual

123

Appendix B — Default Settings Setting

Description

Default

Date

Sets the current date.

System date

Sleep Timer

Selects the amount of time the printer waits before it goes to Sleep mode.

Disable

Command Language Sets the printer command language. If changed, requires restart.

Fingerprint

Alert Notification Method

Selects how you want the printer SNMP Trap + to notify you of printer alerts. Email

Unit of Measure

Selects the unit of measure that Dots is used to define several printing parameters.

Display and Audio Settings This section describes display and audio settings for the printer. To view these settings: • •

From the printer Main Menu, select Settings > System Settings > Display. From the printer web page, click the Configure tab > System Settings > Display or Audio.

Setting

Description

Default

Brightness

Selects the brightness of the printer screen. Medium

Idle Information Selects the information that appears on the IPv4 address printer screen when it is in Idle mode. Time Format

Selects the format used to display time on 24 Hour the printer.

Date Format

Selects the format used to display date on dd/mm/yyyy the printer.

Menu Access

Determines if the Menu button on the printer web page is accessible.

PIN

Sets the that allows access to the 1234 Menu button on the printer web page, if the Menu Access parameter is set to Enable With PIN. Range is 4 to 16 characters.

Enable

Screen Timeout Selects how long the printer screen stays on Disable before the screen saver starts. 124

PM43 and PM43c Mid-Range Printer Manual

Appendix B — Default Settings Setting

Description

Default

Feed Key Access Determines if the Feed button on the printer keypad is enabled or disabled.

Enable

Volume

Off

Sets the printer volume.

System I/O Settings This section describes system I/O settings for the printer. To view these settings: • •

From the printer Main Menu, select Settings > System Settings > Manage I/O. From the printer web page, click the Configure tab > System Settings > Manage I/O.

Setting

Description

Default

Wireless 802.11

Determines if the printer is allowed to communicate using its 802.11 radio. ed only if the optional Wi-Fi+Bluetooth module is installed.

Enable

Bluetooth

Determines if the printer is allowed to communicate using its Bluetooth radio. ed only if the optional Wi-Fi+Bluetooth module is installed.

Enable

RFID

Enable Determines if the printer is allowed to communicate using its RFID radio. ed only if the RFID module is installed.

Virtual COM

Determines if you can enable the USB port to Disable be used as a virtual serial port.

System Network Services This section lists the network services you can manage from the printer. You will only see Manage Services from the menus if you have an Ethernet or Wireless module installed in the printer. To view these services: • •

From the printer Main Menu, select Settings > System Settings > Manage Services. From the printer web page, click the Configure tab > System Settings > Manage Services.

PM43 and PM43c Mid-Range Printer Manual

125

Appendix B — Default Settings

Service

Description

Default

Web Server

Determines if the web server is enabled in the printer.

Enable

FTP

Determines if the printer can use File Transfer Protocol (FTP).

Enable

Avalanche

Determines if the printer can be managed by Wavelink Avalanche.

Enable

Net1

Determines if the printer can use Telnet to communicate with Fingerprint.

Enable

SmartSystems

Determines if the printer can be managed by Intermec SmartSystems Foundation.

Enable

SNMP

Determines if the printer can use SNMP.

Enable

LPR

Determines if the printer can use the line printer Enable server (LPR) daemon.

IKEv2

Determines if the printer can use IKEv2.

Disable

SSH

Determines if the printer can use Secure Socket Handling (SSH).

Enable

Telnet

Determines if the printer can use Telnet.

Enable

System Maintenance Alert Settings This section describes the system maintenance alert settings, such as the odometer distance. To view these settings: • •

126

From the printer Main Menu, select Settings > System Settings > Maintenance Alerts. From the printer web page, click the Configure tab > System Settings > Maintenance Alerts.

Setting

Description

Default

Odometer ( Resettable)

Sets the length of media (in meters) that the 0 printer prints before the Odometer ( Resettable) alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295.

PM43 and PM43c Mid-Range Printer Manual

Appendix B — Default Settings Setting

Description

Default

Odometer (Printer)

Sets the length of media (in meters) that the 0 printer prints before the Odometer (Printer) alert is sent. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295.

Odometer (Current Sets the length of media (in meters) that the 0 Printhead) printer prints before the Odometer (Current Printhead) alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. Replace Printhead

Sets the length of media (in meters) that the 0 printer prints before the Replace Printhead alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295.

Clean Printhead

Sets the length of media (in meters) that the 0 printer prints before the Clean Printhead alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295.

Faulty Dot

0 Sets the number of faulty dots on the printhead before the Faulty Dot alert is sent, if this alert is configured. Range is 0 to 4294967295.

Ribbon Low Diameter

Sets the minimum diameter of the ribbon roll before the Ribbon Low alert is sent, if this alert is configured. Range is 0 to 200 mm.

PM43 and PM43c Mid-Range Printer Manual

0

127

Appendix B — Default Settings

128

PM43 and PM43c Mid-Range Printer Manual

C Print Labels with INPrint

This section explains how to use the INPrint feature to print labels.

129

Appendix C — Print Labels with INPrint

About the INPrint Page The INPrint page features sample web forms you can use to quickly and easily print single labels if you are using the Fingerprint or Direct Protocol language on your printer. You select a web form from the lists and enter information in the fields for that label. You can then preview and print the label. The printer firmware includes several predefined label formats. You can also copy your own label formats to the printer and print them from this page.

Print INPrint Labels If the printer is connected to an Ethernet or Wi-Fi network, you can print labels by entering information in a web form. You access web forms through the printer web page. 1 On your desktop PC, start a browser. 2 In the address bar, type the IP address of your printer and press Enter. The printer web page appears. 3 Click . The page appears.

130

PM43 and PM43c Mid-Range Printer Manual

Appendix C — Print Labels with INPrint

4 Type your name and and then click . The default value for name is and the default value for is . 5 Click the INPrint tab. 6 Select the web form you want to print: •

If you created the web form yourself, click Customer ed and then select the web form in the list.

•

To use one of the Resident (Intermec-supplied) web forms, click Resident and then select the web form in the list.

7 Type information in the web form as needed. 8 (Optional) To preview the label on screen, click Preview. 9 To print the label, click Print.

PM43 and PM43c Mid-Range Printer Manual

131

Appendix C — Print Labels with INPrint

Predefined INPrint Label Formats Predefined INPrint Label Formats and Sample Illustrations Format Name

Sample

203_returnadd_3x1.lbx

minimal.lbx shipping.lbx

203_in_demo_4x6.lbx

132

PM43 and PM43c Mid-Range Printer Manual

Appendix C — Print Labels with INPrint

Predefined INPrint Label Formats and Sample Illustrations Format Name

Sample

203_shipaddr_4x6.lbx

lifetest.lbx

PM43 and PM43c Mid-Range Printer Manual

133

Appendix C — Print Labels with INPrint

Predefined INPrint Label Formats and Sample Illustrations Format Name

Sample

203_packslip_4x6.lbx

134

PM43 and PM43c Mid-Range Printer Manual

Linux Copyright Information This software is provided in pertinent parts by the following copyright holders: Copyright or License Text

Link to Source Code

BlueZ - Bluetooth protocol stack for Linux http://www.bluez.org LPRng, IFHP, and LPRng Tool License

http://www.lprng.com

pslash - a lightweight framebuffer splashscreen for embedded devices

http://git.yoctoproject.org/cgit/cgit.cgi/psplash

udhop DH client

http://busybox.net/products.html

Copyright © 1997 Warren W. Gay VE3WWG

http://sourceforge.net/projects/wavplay/

EINA-EFL data type library, Copyright © 2008 Cedric Bail

http://www.enlightenment.org

Copyright © 2008 Christian Kellner, Samuel Cormier-Iijima

http://www.gtk.org

Copyright © 2001, 2002 Brian Stafford

http://www.stafford.uklinux.net/libesmtp/

Copyright © 1996 Markus Franz Xaver, Johannes Oberhumer

http://www.oberhumer.com/opensource/lzo/

http://tslib.berlios.de/ Copyright © 2002 Nicolas Pitre Copyright © 2003 Texas Instruments, Inc. Copyright © 2003 Chris Larson. Copyright © 2004 Michael Opdenacker < [email protected]> Original version: Copyright © 2001 Russell King. Mono compilers and tools. Copyright © 2001, 2002, 2003, Ximian and contributors.

http://www.mono-project.com/Main_Page

Copyright (C) 2003 WIDE Project.

https://fedorahosted.org/dhv6/

Copyright (c) 2002-2008 Matt Johnston Portions copyright (c) 2004 Mihnea Stoenescu

https://matt.ucc.asn.au/dropbear/dropbear.html

Copyright (c) 2004, Jan Kneschke, incremental

http://www.lighttpd.org/

Copyright (C) 1994-2008 Lua.org, PUCRio.

http://www.lua.org/

PM43 and PM43c Mid-Range Printer Manual

135

Copyright or License Text

Link to Source Code

Copyright (C) 2004, 2005 WIDE Project.

http://www.racoon2.wide.ad.jp/w/

Copyright (C) 1995, 1996, 1997, 1998, and http://ipsec-tools.sourceforge.net/ 1999 WIDE Project. Copyright 1989, 1991, 1992 by Carnegie http://www.net-snmp.org/ Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California Copyright (c) 2001-2003, Networks Associates Technology, Inc Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd. Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. Copyright (c) 2003-2010, Sparta, Inc Copyright (C) 2000-2011 Carsten Haitzler http://www.enlightenment.org/ and various contributors Copyright (c) 1999 - Carsten Haitzler (The Rasterman) Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.

http://www.libexpat.org/

Copyright 2009 Intermec Technologies Corp. All rights reserved. Based on code from Frank Da Cruz's excellent book, _Kermit: A File Transfer Protocol_, Digital Press, 1986.

http://www.columbia.edu/kermit/

Copyright (c) 1997 Eric S. Raymond

http://giflib.sourceforge.net/

Copyright (C) 1991-1998, Thomas G. Lane.

http://www.ijg.org/

Copyright 2006 Richard Wilson Copyright 2008 Sean Fox

http://www.netsurf-browser.org/projects/libnsbmp/

Copyright (c) 1998-2009 Glenn RandersPehrson

http://www.libpng.org/pub/png/libpng.html

136

PM43 and PM43c Mid-Range Printer Manual

Copyright or License Text

Link to Source Code

Copyright (c) 1998-2007 The OpenSSL Project.

http://www.openssl.org/

(C) 1995-2004 Jean-loup Gailly and Mark Adler

http://zlib.net/

Copyright (c) 2003-2009, Jouni Malinen < [email protected]> and contributors (C) Copyright 2000-2008 Wolfgang Denk, http://www.denx.de/wiki/U-Boot/WebHome DENX Software Engineering, [email protected]. Copyright © Freescale Semiconductor, Inc. 2004-2007. All rights reserved.

http://ltib.org/

Copyright (c) 1997-2002 Jean Tourrilhes < [email protected]>

http://www.hpl.hp.com/personal/Jean_Tourrilhes/ Linux/Tools.html

Alessandro Rubini, 2008

http://www.gnudd.com/sw/fiq-engine.html

This software is provided by all copyright holders “as is” and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall any copyright holder or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possiblity of such damage.

PM43 and PM43c Mid-Range Printer Manual

137

Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2012 Intermec Technologies Corporation. All rights reserved.

PM43 and PM43c Mid-Range Printer Manual

*935-046-001* P/N 935-046-001