Milling Machine Operations 384z5t

MILLING OPERTION DETAILS WHAT IS MILLING? Milling is the process of cutting away material by feeding a workpiece past a rotating multiple tooth cutter. The cutting action of the many teeth around the milling cutter provides a fast method of machining. Milling machines were first invented and developed by Eli Whitney to mass produce interchangeable musket parts. MILLING MACHINES

Types. Milling machines are basically classified as being  

Horizontal or Vertical to indicate the axis of the milling machine spindle.

These machines are also classified as     

knee-type, ram-type, manufacturing or bedtype, and planer-type milling machines.

Most machines have self-contained electric drive motors, coolant systems, variable spindle speeds, and power operated table feeds. KNEE-TYPE MILLING MACHINES. Knee-type milling machines are characterized by a vertical adjustable worktable resting on a saddle ed by a knee. The knee is a massive casting that rides vertically on the milling machine column and can be clamped rigidly to the column in a position where the milling head and the milling machine spindle are properly adjusted vertically for operation. Bench-type Plain Horizontal Milling Machine. The bench-type plain horizontal milling machine is a small version of the floor-mounted plain horizontal milling machine; it is mounted to a bench or a pedestal instead of directly to the floor. The milling machine spindle is horizontal and fixed in position. An adjustable overhead arm and are provided. Floor-mounted Universal Horizontal Milling Machine: 1 The basic difference between a universal horizontal milling machine and a plain horizontal milling machine is in the adjustment of the worktable, and in the number of attachments and accessories available for performing various special milling operations. The universal horizontal milling machine has a worktable that can swivel on the saddle

11/26/2016 KRISHNA PRASAD R

This machine can also be used for cutting keyways, racks and gears and for fluting taps and reamers.

ASST. PROFESSOR MECHANCIAL ENGINEERING DEPARTMENT MVJCE

General. The milling machine removes metal with a revolving cutting tool called a milling cutter. With various attachments, milling machines can be used for boring, slotting, circular milling dividing, and drilling.

1

MILLING OPERTION DETAILS

RAM-TYPE MILLING MACHINES. (a) Description. The ram-type milling machine is characterized by a spindle mounted to a movable housing on the column, permitting positioning the milling cutter forward or rearward in a horizontal plane. Two widely used ram-type milling machines are the floor-mounted universal milling machine and the swivel cutter head ram-type milling machine.

11/26/2016 KRISHNA PRASAD R

ASST. PROFESSOR MECHANCIAL ENGINEERING DEPARTMENT MVJCE

with respect to the axis of the milling machine spindle, permitting workpieces to be adjusted in relation to the milling cutter.

2

MILLING OPERTION DETAILS MILLING MACHINE ACCESSORIES AND ATTACHMENTS :

(1) The indexing fixture is an indispensable accessory for the milling machine. Basically, it is a device for mounting workpieces and rotating them a specified amount around the workpiece's axis, as from one tooth space to another on a gear or cutter. (2) The index fixture consists of an index head, also called a dividing head, and a footstock, similar to the tailstock of a lathe. The index head and the footstock are attached to the worktable of the milling machine by Tslot bolts.

11/26/2016 KRISHNA PRASAD R

INDEXING FIXTURE:

ASST. PROFESSOR MECHANCIAL ENGINEERING DEPARTMENT MVJCE

a. Arbors. Milling machine cutters can be mounted on several types of holding device. The machinist must know the devices, and the purpose of each to make the most suitable tooling setup for the operation to be performed. Technically, an arbor is a shaft on which a cutter is mounted. For convenience, since there are so few types of cutter holders that are not arbors, we will refer to all types of cutter holding devices as arbors.

3

Indexing The Workpieces. (1) General. Indexing equipment is used to hold the workpiece, and to provide a means of turning it so that a number of accurately located speed cuts can be made, such as those required in cutting tooth spaces on gears, milling grooves in reamers and taps, and forming teeth on milling cutters.

11/26/2016 KRISHNA PRASAD R

An index plate containing graduations is used to control the rotation of the index head spindle. The plate is fixed to the index head, and an index crank, connected to the index head spindle by a worm gear and shaft, is moved about the index plate. Workpieces are held between centers by the index head spindle and footstock. Workpieces may also be held in a chuck mounted to the index head spindle, or may be fitted directly into the taper spindle recess of some indexing fixtures.

ASST. PROFESSOR MECHANCIAL ENGINEERING DEPARTMENT MVJCE

MILLING OPERTION DETAILS

4

MILLING OPERTION DETAILS The workpiece is held in a chuck, attached to a indexing head spindle, or mounted in between a live center in the indexing head and dead center in the footstock. The center rest can be used to long slender work. The center of the footstock can be raised or lowered for setting up tapered workpieces that require machining.

Plain Indexing. The following principles apply to basic indexing of workpieces: (a) Suppose it is desired to mill a spur gear with 8 equally spaced teeth. Since 40 turns of the index crank will turn the spindle one full turn, one-eighth of 40, or 5 turns of the crank after each cut, will space the gear for 8 teeth. (b) The same principle applies whether or not the divisions required divide evenly into 40. For example, if it is desired to index for 6 divisions, 6 divided into 40 equals 6 2/3 turns; similarly, to index for 14 spaces, 14 divided into 40 equals 2 6/7 turns. Therefore, the following rule can be derived: to determine the number of turns of the index crank needed to obtain one division of any number of equal divisions on the workpiece, divide 40 by the number of equal divisions desired (provided the worm wheel has 40 teeth, which is standard practice). (c) Index Plate. The index plate (figure 11 on the following page) is a round metal plate with a series of six or more circles of equally spaced holes; the index pin on the crank can be inserted in any hole in any circle. With the interchangeable plates regularly furnished with most index heads, the spacings necessary for most gears, boltheads, milling cutters, splines, and so forth, can be obtained. The following sets of plates are standard equipment:

11/26/2016 KRISHNA PRASAD R

mechanism, used to control the rotation of the index head spindle in order to space or divide a workpiece accurately. A simple indexing mechanism is illustrated in figure 10 on the following page. It consists of a 40-tooth worm wheel fastened to the index head spindle, a single-cut worm, a crank for turning the wormshaft, and an index plate and sector. Since there are 40 teeth in the worm wheel, one turn of the index crank causes the worm wheel, and consequently the index head spindle to, make one-fortieth of a turn; so 40 turns of the index crank revolves the spindle one full turn.

ASST. PROFESSOR MECHANCIAL ENGINEERING DEPARTMENT MVJCE

Index Head. The bead of the indexing fixture contains an indexing

5

Angular Indexing. (a) When you must divide work into degrees or fractions of degrees by plain indexing, that one turn of the index crank will rotate a point on the circumference of the work 1/40 of a revolution. Since there are 360° in a circle, one turn of the index crank will revolve the circumference of the work 1/40 of 360°, or 9°. Hence, in using the index plate and fractional parts of a turn, 2 holes in a 18-hole circle equals 10, 1 hole in a 27-hole circle equals 2/3°, 3 holes in a 54-hole circle equals 1/3°. To determine the number of turns, and parts of a turn of the index crank for a desired number of degrees, divide the number of degrees by 9. The quotient will represent the number of complete turns and fractions of a turn that you should rotate the index crank. For example, the calculation for determining 15° when an index plate with a 54-hole circle is available, is as follows:

11/26/2016 KRISHNA PRASAD R

To Cut a Gear of 42 Teeth. Using the rule again, divide 40 by 42 which equals 40/42 or 20/21 turns, 40 spaces on a 42-hole circle or 20 spaces on a 21-hole circle. To use the rule given, select a circle having a number of holes divisible by the required fraction of a turn reduced to its lowest . The number of spaces between the holes gives the desired fractional part of the whole circle. When counting holes, start with the first hole ahead of the index pin.

ASST. PROFESSOR MECHANCIAL ENGINEERING DEPARTMENT MVJCE

MILLING OPERTION DETAILS

6

MILLING OPERTION DETAILS

11/26/2016 KRISHNA PRASAD R

ASST. PROFESSOR MECHANCIAL ENGINEERING DEPARTMENT MVJCE

or one complete turn plus 36 holes on the 54-hole circle. The calculation for determining 13 1/2° when an index plate with an 18-hole circle is available, is as follows:

7