Bs 499 2t4fp
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3l3c15
Overview 3z723u
& View Bs 499 as PDF for free.
More details 2i4a6q
- Words: 44,876
- Pages: 154
BS 499-1:2009
BSI British Standards Welding and symbols Part 1: Glossary for welding, brazing and thermal cutting
NO NO COPYING COPYING WITHOUT WITHOUT BSI BSI PERMISSION PERMISSION EXCEPT EXCEPT AS AS PERMITTED PERMITTED BY BY COPYRIGHT COPYRIGHT LAW LAW
raising standards worldwide™™
BRITISH STANDARD
BS 499-1:2009 Publishing and copyright information
The BSI copyright notice displayed in this document indicates when the document was last issued © BSI 2008 ISBN 978 0 580 58471 8 ICS 01.040.25; 25.160.01 The following BSI references relate to the work on this standard: Committee reference WEE/1 Draft for comment 08/30162761 DC
Publication history First published August 1933 Second edition June 1939 Third edition October 1952 Fourth edition October 1965 Fifth edition November 1983 Sixth edition February 1991 Seventh edition December 2008
Amendments issued since publication Date
Text affected
BRITISH STANDARD
BS 499-1:2009
Contents Foreword 1
v
Scope
1
Section 1. common to more than one section
2
Section 2. relating to welding with pressure 19 Subsection 21. relating to more than one subsection 19 Subsection 22. relating only to resistance welding 28 Subsection 23. relating only to friction welding 47 Subsection 24. relating only to pressure welding 48 Subsection 25. relating only to diffusion welding 48 Subsection 26. relating only to explosive welding 49 Subsection 27. relating only to friction stir welding 49 Section 3. relating to fusion welding (welding without pressure) 57 Subsection 31. relating to more than one subsection 57 Subsection 32. relating only to arc welding 87 Subsection 33. relating only to gas welding 98 Subsection 34. relating only to electron beam welding 103 Subsection 35. relating only to light radiation welding 106 Subsection 36. relating only to aluminothermic welding 107 Subsection 37. relating only to electro-slag welding 109 Section 4. relating to braze welding and brazing 110 Subsection 40. relating only to braze welding 110 Subsection 41. relating only to brazing 111 Section 5. relating to testing
113
Section 6. relating to weld imperfections
118
Section 7. relating to cutting 123 Subsection 70. relating to more than one subsection 123 Subsection 71. relating only to oxygen cutting 126 Subsection 72. relating only to arc cutting 128 Subsection 73. relating only to spark erosion cutting 128 Subsection 74. relating only to electron beam cutting 129 Subsection 75. relating only to laser cutting 129 Section 8. relating to health and safety Bibliography Index
130
131
133
List of figures Figure 1 – Chart of derivation of welding processes vi Figure 2 – Chart of derivation of brazing processes vii Figure 3 – Chart of derivation of thermal cutting processes vii Figure 4 – Root, fusion penetration, weld junction and zones of typical welds 3 Figure 5 – Preparation for square butt weld 7 Figure 6 – Preparation for butt weld between plates with raised edges 7 Figure 7 – Preparation for single bevel butt weld with backing 9 Figure 8 – Configuration for double-covered lap t 10 Figure 9 – Configuration for single lapped t 11 Figure 10 – Preparation for single V-butt weld 12 Figure 11 – Oxy-fuel gas pressure welding 20
BSI 2008
.
i
BS 499-1:2009
BRITISH STANDARD
Figure 12 – Examples of series spot welding 22 Figure 13 – Forms of projection welds 25 Figure 14 – Typical example of weld made using pressure – Double row of staggered, spaced spot welds 26 Figure 15 – Typical example of weld made using pressure – Projection weld 26 Figure 16 – Foil butt-seam weld 27 Figure 17 – Weld nugget 28 Figure 18 – Typical example of weld made using pressure – Resistance spot welds 28 Figure 19 – Typical example of weld made using pressure – Seam weld 29 Figure 20 – Mash weld 29 Figure 21 – Nail head welding 30 Figure 22 – Vertical centre electrode 31 Figure 23 – Vertical offset electrode 31 Figure 24 – Angle offset electrode 32 Figure 25 – Cranked offset electrode 32 Figure 26 – Time and pressure diagram for simple spot, stitch, or projection welding 35 Figure 27 – Time and pressure diagram for pulsation spot or projection welding 35 Figure 28 – Time and pressure diagram for spot or projection welding, programme control 36 Figure 29 – Time and pressure diagram for pulsation spot or projection welding, programme control 36 Figure 30 – Time and pressure diagram for spot welding, programme control with dual-pressure cycle 30 Figure 31 – Time and pressure diagram for seam welding 30 Figure 32 – Time and pressure diagram for step-by-step seam welding 38 Figure 33 – Time and pressure diagram for roller spot welding 38 Figure 34 – Time and pressure diagram for step-by-step roller spot welding 39 Figure 35 – Time and platen movement diagram for straight flash welding 39 Figure 36 – Generalized diagram of speed, applied force, axial movement and time for continuous drive friction welding 40 Figure 37 – Generalized diagram of speed, applied force and axial movement with time for stored energy friction welding 42 Figure 38 – Angle centre electrode 45 Figure 39 – Swan-necked electrode 45 Figure 40 – Basic principle of friction stir welding 50 Figure 41 – Macrosection of a butt weld showing incomplete penetration 50 Figure 42 – Heel and heel plunge depth 51 Figure 43 – Adjustable probe tool 51 Figure 44 – Fixed bobbin tool 52 Figure 45 – Self-reacting bobbin tool 52 Figure 46 – Cross-section of a friction stir weld 54 Figure 47 – Tool shoulder footprint visible at the exit hole 54 Figure 48 – Cross-section of friction stir lap weld showing undesirable/ extreme plate thinning on the retreating side and a hook feature on the advancing side of the weld 56 Figure 49 – Example of back-step sequence 57 Figure 50 –Sketches of types of ts, types of weld(s) and weld preparations 58 ii
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Figure 51 – Gap, root face, root radius, land, included angle and angle of bevel for typical weld preparations 64 Figure 52 – Examples of toes, legs, weld widths and fusion faces 66 Figure 53 – Actual, effective, design and maximum throat thickness of typical welds 67 Figure 54 – Examples of excess weld metal 68 Figure 55 – Welding positions: slope (S) 70 Figure 56 – Schematic diagram of main welding positions 70 Figure 57 – Simplified view of main welding positions 71 Figure 58 – Comparison of UK (USA) and ISO welding positions 71 Figure 59 – Weld preparation using a fusible insert 73 Figure 60 – Typical example of butt weld – General view of butt weld 75 Figure 61 – Preparation for double-bevel T-butt welds 76 Figure 62 – Typical example of multi-run fusion weld – Double V-butt weld 77 Figure 63 – Preparation for fillet weld (T-t) 77 Figure 64 – Typical examples of multi-run fusion welds 79 Figure 65 – Preparation for single U-butt weld 80 Figure 66 – Typical example of fusion weld – Single V-butt weld 81 Figure 67 – Typical example of fusion weld – Fillet weld 82 Figure 68 – Weave technique 84 Figure 69 – Example of skip sequence 84 Figure 70 – Examples of block sequences 85 Figure 71 – Roots of typical weld preparations 86 Figure 72 – Penetration bead 86 Figure 73 – Self-shielded tubular-cored arc welding 92 Figure 74 – Surge reignition 94 Figure 75 – Types of rectification 95 Figure 76 – Neutral oxy-acetylene flame 98 Figure 77 – Carburizing oxy-acetylene flame 99 Figure 78 – Carburizing oxy-acetylene flame for a hard surfacing application 99 Figure 79 – Oxidizing oxy-acetylene flame 99 Figure 80 – Leftward welding 99 Figure 81 – Rightward welding 99 Figure 82 – All-position rightward welding 102 Figure 83 – Diagrammatic representation of a diode gun 104 Figure 84 – Diagrammatic representation of a triode gun 104 Figure 85 – Diagrammatic representation of a back-bombarded gun 105 Figure 86 – Basic equipment for aluminothermic welding 108 Figure 87 – Electro-slag welding 109 Figure 88 – Bell butt t 110 Figure 89 – Diminishing bell butt t 110 Figure 90 – Short bell branch t 111 Figure 91 – U-tensile test specimen 115 Figure 92 – Cruciform test pieces 115 Figure 93 – Method of obtaining cruciform test specimen 116 Figure 94 – Tongue-bend test specimen 116 Figure 95 – Shear test piece 117 Figure 96 – Incompletely filled groove 118 Figure 97 – Undercut 118 Figure 98 – Lack of sidewall fusion 119 Figure 99 – Lack of root fusion 119 Figure 100 – Lack of inter-run fusion 119 Figure 101 – Incomplete root penetration 119 BSI 2008
.
iii
BS 499-1:2009
BRITISH STANDARD
Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure
102 103 104 105 106 107 108 109 110 111
– – – – – – – – – –
Excess penetration bead 121 Root concavity 121 Shrinkage groove 121 Drag 124 Single-cantilever cutting machine 125 Double-cantilever cutting machine 125 Extended boom single-cantilever cutting machine Portal cutting machine 125 Double-portal cutting machine 126 Portal-cantilever cutting machine 126
List of tables Table 1 – and symbols for main welding positions
125
69
Summary of pages This document comprises a front cover, an inside front cover, pages i to viii, pages 1 to 142, an inside back cover and a back cover. iv
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Foreword Publishing information This part of BS 499 is published by BSI and came into effect on 31 December 2008. It was prepared by Technical Committee WEE/1, Definition and symbols for welding. A list of organizations represented on this committee can be obtained on request to its secretary.
Supersession This part of BS 499 supersedes BS 499-1:1991, which is withdrawn.
Relationship with other publications This standard has been aligned, as far is as practicable, with existing European and international lists of and definitions for welding, including BS EN 1792:2003, PD CEN/TR 14599, BS ISO 857 (all parts) and BS EN 13622. There might not be full agreement with standards that have not been adopted as British Standards. Where it was felt that an existing definition needed clarification, this has been done while striving to not contradict the existing definition. As far as practicable, the numbering system used in this standard follows that of BS EN 1792:2003 with new numbers allocated to that are not in the European standard. Where definitions are based on those in a European or international standard, the identifier of the original standard is given in square brackets after the definition. BS 499 is published in two parts, with a supplement to this part: *
Part 1: Glossary for welding, brazing and thermal cutting
*
Part 1, Supplement: Definitions for electric welding equipment
*
Part 2c: European arc welding symbols in chart form
NOTE 1 BS 499-1, Supplement is a reproduction of IEV 50 (851):1991. NOTE 2 BS 499-2c is based on BS EN 22553.
Information about this document This is a full revision of the standard, and introduces the following principal changes: Charts showing the derivation of welding, cutting and allied processes are given in Figure 1, Figure 2 and Figure 3. Commonly used friction stir welding are included in the new Section 27.
Contractual and legal considerations This publication does not purport to include all the necessary provisions of a contract. s are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.
BSI 2008
.
v
BS 499-1:2009
vi
.
BSI 2008
BRITISH STANDARD
BRITISH STANDARD
BS 499-1:2009
BSI 2008
.
vii
BS 499-1:2009
viii
.
BSI 2008
BRITISH STANDARD
This page deliberately left blank.
BRITISH STANDARD
BS 499-1:2009
1 Scope This standard provides , symbols and definitions for welding, brazing and thermal cutting of metals. Some definitions might also apply to non-metals. It does not cover mechanically fastened or adhesive bonded ts. This standard is intended for designers, those drafting welding specifications, welding production, manufacturers and inspection personnel. Preferred and equivalent are given in bold type. Non-preferred are given in medium type. Deprecated are indicated as such.
BSI 2008
.
1
BS 499-1:2009
BRITISH STANDARD
Section 1. common to more than one section No.
Term
Definition
10 001
welding
ing process in which two or more parts are united producing a continuity in the nature of the workpiece material(s) by means of heat or pressure or both, and with or without the use of filler material
10 002
weld
union of pieces of material resulting from welding
10 003
welder
operator who performs or controls the welding process
10 004
welding operator
person who controls fully mechanized or automatic fusion welding processes
10 005
welding plant welder: deprecated
apparatus for providing and controlling energy, and movement if necessary, for making a weld
10 006
welding process
particular method of welding involving the application of certain metallurgical, electrical, physical or mechanical principles
10 007
manual welding
welding where the electrode holder, welding hand gun, torch or blowpipe is manipulated by hand
10 008
partly mechanized welding
manual welding where the wire feed is mechanized
10 010
mechanized welding
welding in which the welding parameters are maintained within a suitable tolerance by mechanical or electronic means and which may be manually varied during the welding process to create the required welding conditions
10 011
automatic welding
welding in which all operations are preset and performed automatically during the process
10 012
strength weld
weld designed to withstand stress
10 013
parent metal base metal: deprecated
metal to be ed or surfaced by welding, braze welding or brazing (See Figure 4.)
10 014
filler metal
welding consumable added during welding to form the weld
10 015
filler wire welding wire
filler material in the form of a wire which may or may not be a part of the welding circuit
10 016
filler rod welding rod: deprecated
filler material in the form of a rod which may or may not be a part of the welding circuit
10 017
flux
material used during welding, brazing or braze welding to clean the surfaces of the t chemically, to prevent atmospheric oxidation and to reduce impurities NOTE In arc welding, many other substances, which perform special functions, are added.
10 018
deposited metal
filler metal that has been added during welding
10 020
weld metal
all metal melted during the making of a weld and retained in the weld (See Figure 4.)
10 021
run
metal melted or deposited during one age of an electrode, or torch or blowpipe
2
.
BSI 2008
BRITISH STANDARD
Figure 4
BS 499-1:2009
Root, fusion penetration, weld junction and zones of typical welds
1 4
3
2
5
8
6
7
Key 1 Weld zone 2 Heat-affected zone 3 Weld metal 4 Parent metal 5 Fusion penetration 6 Weld junction 7 Root (of weld) 8 Fusion zone
No.
Term
Definition
10 022
deposition rate
mass of filler metal consumed per unit of productive welding time
10 023
weld zone
zone containing the weld metal and the heat-affected zone (See Figure 4.)
10 024
heat-affected zone HAZ
portion of non-melted parent metal whose microstructure has been affected (See Figure 4.)
10 025
fusion zone
part of the parent metal that is melted into the weld metal, as determined on the cross-section of a weld (See Figure 4.)
10 026
fusion line
interface between the weld metal and the non-melted parent metal as determined on the cross-section of a fusion weld
10 027
welding technique
manner in which an operator manipulates an electrode, a blowpipe or a similar appliance
10 028
welding procedure
specific course of action followed in welding, including a list of materials and, where necessary, tools to be used (See Annex A to Annex G.)
10 030
(welding) sequence
order and direction in which ts, welds or runs are made
10 031
weld run sequence
order in which the runs of a weld or deposited layer are produced
10 032
stud welding
ing of a metal stud or similar part to a workpiece NOTE Welding may be accomplished by arc, resistance, friction or other suitable process, with or without external gas shielding. The weld is made over the whole end area of the stud or attachment.
10 033
hard facing hard surfacing
application of a hard, wear-resistant material to the surface of a component by welding, braze welding or spraying
10 034
spatter
globules of metal expelled during welding or cutting
BSI 2008
.
3
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 035
duty cycle
1) In the sense of ‘‘welding operator’’ duty cycle, ratio of time spent welding to the total time which includes other activities, e.g. changing electrodes, slag removal 2) In the sense of ‘‘machine’’ duty cycle, measure of the capability of the welding equipment
10 036
transferred arc
arc established between the electrode of the plasma arc torch and the workpiece
10 037
non-transferred arc
arc established between the electrode and the constricting nozzle of the plasma arc torch or thermal spraying gun NOTE The workpiece does not form part of the electrical circuit.
10 038
electrode pick-up
contamination of a non-consumable electrode by metal or scale from the surface of the workpiece
10 040
pick-up
1) In fusion welding, transfer of alloying elements from the parent metal to the weld metal as a result of dilution 2) In resistance welding, particles of the surface of the workpiece that adhere to the surface of the electrodes, or vice versa
10 041
arc eye
irritation of the eye caused by exposure to radiation from an electric arc
10 042
electrode holder
device to hold an electrode and to convey current to it NOTE 1 In resistance welding, this is device holding a spot welding electrode. NOTE 2 In arc welding, this is a tool for clamping, guiding and connecting a covered electrode to the welding circuit while insulating the operator from the welding
10 043
welding glass filter glass
special filter that provides protection against glare when welding and in addition reduces the UV radiation and IR radiation that is dangerous to the human eye
10 044
heat filter
colourless, transparent, heat-absorbing glass plate placed between the plain glass and the welding glass to protect the eyes NOTE It is usually used in high current metal inert-gas welding.
10 045
blowpipe torch: deprecated
device for mixing and burning gases to produce a flame for welding, brazing, braze welding, cutting, heating and similar operations (See also 32 142 to 32 144.)
10 046
flashback
retrogression of the flame beyond the blowpipe body into the hose, with possible subsequent explosion
10 047
pressure regulator gas regulator
device for attachment to a gas cylinder or pipeline for reducing and regulating the gas pressure to the working pressure required
10 048
residual welding stress
stress remaining in a metal part or structure as a result of welding
10 050
pulse
unidirectional flow of current of either polarity of brief duration
10 051
pulse time
duration of a pulse
4
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 052
welding primer weldable primer: deprecated
paint that is applied to a shot-blasted metal surface for protective purposes, which does not have to be removed prior to welding and does not prevent the making of a satisfactory weld
10 053
welding consumables
all materials, such as filler materials, gas, flux or paste, used up during welding and enabling or facilitating the formation of a weld
10 054
welding equipment
basic apparatus used in welding such as power source, as well as wire feeder and powder feeder, etc.
10 055
welding accessories
all items of welding equipment associated with welding, other than welding plant and welding consumables
10 056
layer
stratum of weld metal consisting of one or more runs, side by side
10 057
building-up
overlay welding to obtain or restore required dimensions
10 058
surfacing
producing a layer of metal, by welding, on a workpiece to obtain desired properties or dimensions
10 060
t preparation weld preparation
preparation for making a connection where the individual components, suitably prepared and assembled, are ed by welding or brazing
10 061
t
junction of workpieces or the edges of workpieces that are to be ed or have been ed
10 063
air gap gap
1) In fusion welding, minimum distance at any cross-section between edges, ends or surfaces to be ed 2) In magnetically-impelled arc butt welding, space between component surfaces across which the arc is maintained during the heating (arcing) period
10 064
heat input
heat introduced into the t during welding, referred to a characteristic dimension, such as a bead or weld length, weld cross-section, weld spot diameter
10 066
acceptance criteria
specified quality criteria for defining conformance of a weld
10 067
acceptance level
specific set of acceptance criteria where more than one set can be selected
10 068
examiner
person who has been appointed to compliance with the applicable standard NOTE In certain cases, an external independent examiner can be required.
10 069
examining body
organization that has been appointed to compliance with the applicable standard NOTE In certain cases, an external independent examining body can be required.
10 070
welding procedure specification WPS
document that has been qualified and provides the required variables of the welding procedure to ensure repeatability during production welding
10 071
welding procedure qualification record WPQR
record comprising all necessary data needed for qualification of a preliminary welding procedure specification
10 073
welding variable
variable which influences the characteristics of the welded t BSI 2008
.
5
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 074
essential variable
welding condition that requires qualification
10 075
additional variable non-essential variable
welding condition addressed in the welding procedure specification but not requiring qualification
10 076
standard material
material produced and delivered in accordance with a standard or specification
10 080
re-start
point on the run where the welding is or was re-started
10 081
post-weld heat treatment
application of heat to an assembly after welding, brazing, soldering, thermal spraying or cutting
10 082
plasma gas
ionized gas that generally forms the major portion of an arc column and provides a conducting path for the current
10 083
preheat
heating of an appropriate area of a workpiece before welding, normally to achieve the preheating temperature
10 084
cooling rate
rate of decrease of temperature with time over a specified temperature range or time
10 085
heating rate
rate of increase of temperature with time over a specified temperature range or time
10 088
dissimilar material t
welded t in which the parent materials have significant differences in mechanical properties and/or chemical composition
10 089
as welded
pertaining to the condition of weld metal, welded ts, and weldments after welding, but prior to any subsequent thermal, mechanical, or chemical treatments NOTE For alloys that may undergo natural ageing (e.g. some aluminium alloys) the as-welded condition lasts only for a limited period of time.
10 090
auxiliary material
welding consumable used during welding, generally not forming part of the finished weld
10 091
quality level
description of the qualities of a weld on the basis of type, size and amount of selected imperfections
10 092
fitness-for-purpose
ability of a product, process or service to serve a defined purpose under specific conditions
10 093
side edge of workpiece
edge of workpiece, transverse to weld surface (see Figure 5, item 2) NOTE Illustration from BS EN ISO 17659.
6
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Figure 5
Preparation for square butt weld
4
8
5
2
7
1 6
3 Key 1 Plate thickness 2 Side edge of workpiece 3 Gap 4 t length
Figure 6
5 6 7 8
Upper workpiece surface Reverse side Plate edge Fusion face (unprepared)
Preparation for butt weld between plates with raised edges
7 4
2
3
5 6 Key 1 Plate thickness 2 Length of raised edge 3 Longitudinal side of raised edge 4 Abutment of raised edge
1 5 6 7
Depth of raised edge Radius of raised edge Fusion face (unprepared)
BSI 2008
.
7
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 094
abutment of raised edge
surface of a raised-edge t (see Figure 6, item 4) NOTE Illustration from BS EN ISO 17659.
10 095
homogeneous t
welded t in which the weld metal and parent material have no significant differences in mechanical properties and/ or chemical composition NOTE A welded t made of similar parent materials without filler metal is considered homogeneous.
10 097
plate edge
edge of a plate, normal to the t axis (see Figure 5, item 7) NOTE Illustration from BS EN ISO 17659.
10 098
manufacturing organization
workshop or site or both which is/are under the same technical and quality management
10 099
welding co-ordinator
qualified person who has responsibilities in the manufacturing operation for carrying out one or more coordination tasks for welding or welding related matters, e.g. planning, controlling, supervising, monitoring, and whose competence and knowledge has been demonstrated by training, education and/or relevant manufacturing experience
10 100
high pressure blowpipe
blowpipe in which the pressure of both the fuel gas and the oxygen/compressed air, measured immediately before the point of mixing, is higher than the pressure of the mixture, measured between point of mixing and welding nozzle
10 101
low pressure blowpipe
blowpipe in which the fuel gas pressure, measured immediately before the mixing chamber, is lower than the pressure of the gas mixture, measured between the mixing chamber and welding nozzle
10 102
edge distance
distance between the centre of a weld and the nearest edge of the workpiece
10 103
range of qualification
extent of qualification for an essential welding variable
10 104
batch sample
one or more units of product selected at random from the batch and considered to be representative of the batch
10 105
plate thickness
See Figures 5, 6, 7, 8, 9, and 10. NOTE Illustrations from BS EN ISO 17659.
10 106
nominal thickness
specified thickness, excluding any permitted tolerances
10 108
welding procedure test
making and testing of a representative welded t, in order to prove the feasibility of a welding procedure NOTE 1 This term is not usually applied to any tests that may have been made during the development of a welding procedure. NOTE 2 Sometimes an additional t of a different type is welded in order to obtain relevant test data.
10 109
function test
test of a welding unit set-up in accordance with a welding procedure specification (WPS)
10 110
production test
welding test carried out in the production environment on the welding unit, on actual products or on simplified test pieces, during an interruption of normal production
10 111
pre-production welding test
welding test having the same function as a welding procedure test, but based on a non-standard test piece representative of the production conditions
8
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 112
production sample testing
testing of actual welded products sampled from a continuous production
10 113
manufacturer’s previous welding experience
practice authenticated by test data demonstrating that established production welding procedures have been capable of consistently producing welds of acceptable quality over a period of time
10 114
upper workpiece surface
normally the side of the t accessible for the commencement of welding (see Figure 5, item 5, and Figure 7, item 5). NOTE Illustrations from BS EN ISO 17659.
10 115
reverse side
side of the t opposite to the upper workpiece surface (see Figure 5, item 6, and Figure 7, item 6). NOTE Illustrations from BS EN ISO 17659.
Figure 7
Preparation for single bevel butt weld with backing
4
8
7
5
1
6
3 10
9 2 Key 1 Plate thickness 2 Root gap 3 Depth of root face 4 Included angle 5 Upper workpiece surface
6 7 8 9 10
Reverse side Fusion face (unprepared) Fusion face (prepared) Root face Weld pool backing
BSI 2008
.
9
BS 499-1:2009
Figure 8
BRITISH STANDARD
Configuration for double-covered lap t
2 1 Key 1 Plate thickness
2
Workpiece width
No.
Term
Definition
10 116
slope
in welding geometry, angle between the root line and the positive x-axis of the horizontal reference plane in straight welds
10 117
ferrite number
arbitrary number indicating magnetic attraction relative to a series of reference samples and therefore proportional to the ferro-magnetic phase content
10 118
work instruction
simplified specification of the welding procedure, suitable for direct application in the workshop
10 119
weld interface
area after the welding force is applied
10 120
workpiece width
width of the workpiece, parallel to the weld surface (see Figure 8, item 2) NOTE Illustration from BS EN ISO 17659.
10 121
lap width
dimension of overlap, transverse to the t line (see Figure 9, item 4) NOTE Illustration from BS EN ISO 17659.
10 122
weld length
overall length of continuous deposited weld metal in a t NOTE Illustration from BS EN ISO 17659.
10
.
BSI 2008
BRITISH STANDARD
Figure 9
BS 499-1:2009
Configuration for single lapped t
3
2 5 1
4 Key 1 Plate thickness 2 Side of lap face 3 Lap length
4 5
Lap width Lapped area
BSI 2008
.
11
BS 499-1:2009
Figure 10
BRITISH STANDARD
Preparation for single V-butt weld
12
8 11 7
13
1 2 5 9
10 3 Key 1 Plate thickness 2 Root gap 3 Depth of root face 4 Side edge of root face
5 6 7 8
14
6
Side edge of preparation Width of preparation Angle of bevel Depth of preparation
4 9 10 11 12
Width of prepared face Included angle Fusion face (prepared) Root face
No.
Term
Definition
10 123
lap length
length of lap, parallel to the t line (see Figure 9, item 3) NOTE Illustration from BS EN ISO 17659.
10 124
t length
dimension of t in the direction of the weld axis (see Figure 5, item 4, Figure 63, item 3, and Figure 65, item 2) NOTE Illustrations from BS EN ISO 17659.
10 125
batch
collection of one or more units of products, made in a single production run
10 126
parent material
material to be ed, or surfaced, by welding, braze welding or brazing
10 127
contracting parties
parties who have entered into a supply contract
12
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 128
welding co-ordination personnel
personnel who have responsibilities in the manufacturing operation for welding and welding related activities whose competence and knowledge have been demonstrated by, e.g. training, education and/or relevant manufacturing experience
10 129
corrosion resistant surfacing
adherent material for protection of a surface against corrosion
10 130
heat resistant surfacing
adherent material for protection of a surface against heat
10 131
overlap
in a lap t, minimum distance between the edges of overlap plates in beam welding, portion of the weld remelted prior to the slope down in seam welding, area in the preceding weld remelted by the succeeding weld
10 132
rotation
in welding geometry, angle between the centreline of a weld and the positive y-axis or a line parallel to the y-axis, measured in the counter-clockwise direction in the plane of the transverse cross-section of the weld
10 133
production welding
welding carried out during manufacture before final delivery to the end
10 134
robotic welding
automatic welding using a robot that can be preprogrammed to different welding paths and fabrication geometries
10 135
fully mechanized welding
welding where all the main operations (excluding the handling of the workpiece) are mechanized NOTE Manual adjustment of welding variables during welding is possible.
10 136
lapped area
area of overlapped material in a lapped t (see Figure 9, item 5) NOTE Illustration from BS EN ISO 17659.
10 137
preheat maintenance temperature
minimum temperature in the weld zone which shall be maintained if welding is interrupted
10 138
preheating temperature
temperature immediately prior to the commencement of welding resulting from the heating of the parent metal in the region of the weld
10 140
finishing welding
welding carried out in order to remove casting defects and core openings to ensure the agreed quality of castings
10 142
t welding
production welding used to components together
10 143
qualified person
person whose competence and knowledge have been obtained by education, training and/or relevant experience NOTE In order to demonstrate the level of competence and knowledge a qualification test may be required.
10 144
heterogeneous t
welded t in which the weld metal and parent material have significant differences in mechanical properties and/or chemical composition
10 145
productive welding time
time during which the welding operation takes place
10 146
welding conditions
conditions under which welds are made; these include environmental factors (e.g. weather), stress and ergonomic factors (e.g. noise, heat, cramped working conditions) and workpiece-related factors (e.g. parent metal, groove shape, working position)
BSI 2008
.
13
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 147
welding parameters
information needed for the performance of welding with a specified welding procedure NOTE Welding parameters are, e.g. welding consumables, parent material, t preparation, welding current, welding voltage, travel speed, preheating, working and inter temperature and run sequence.
10 148
welding sequence schedule
schedule specifying the order and direction in which welds are to be made on a workpiece
10 149
welding time
time required for making a weld (excluding preparatory or finishing operations) NOTE It consists of productive welding time and the servicing time.
10 150
t efficiency
ratio of strength of a t to the strength of the parent metal, expressed as a percentage
10 151
faying surface interface: deprecated
1) surface of one component that is intended to be in with a surface of another component to form a t 2) in friction welding, area developed between the workpieces after completion of the welding operation
10 152
stud
fastener to be attached by stud welding
10 153
protrusion
in stud welding, distance between the tip of the stud and the face of the device in their initial position
10 154
lift
in stud welding, distance between the stud tip and the workpiece surface with the stud-lifting mechanism in position and activated
10 155
semi-automatic welding partly mechanized welding
welding in which some of the welding parameters, such as arc length, are automatically controlled, but manual guidance is necessary
10 156
shop weld
weld made within the premises of the manufacturer of the welded assembly
10 157
site weld
weld made at the location where the assembly is to be installed
10 158
covered filler rod coated filler rod: deprecated
filler rod having a covering of flux
10 159
fusion boundary weld junction fusion line
boundary between the fusion zone and the heat-affected zone (See Figure 4.)
10 160
approved welding procedure documented welding procedure that has been approved by such means as an inspecting authority either by means of a welding procedure test or authentic documented experience gained with the welding of ts similar to that to which the welding procedure applies, or other approved methods
10 161
three-phase welding power welding power source in which power is taken from all three source phases of a three-phase supply to provide a single welding three-phase welding machine current or three single-phase welding currents
10 162
idling time
14
.
BSI 2008
time during which energy is available for welding but is not being used
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 163
recovery time
time required, after a change of conditions has occurred in a welding circuit, for either the current or the voltage, or both, to recover to a specific percentage of their value before the change
10 164
cycle
arbitrary unit of time, of duration equal to that of one cycle of the alternating current supply NOTE Normally in the UK this is 1/50 s
10 165
nozzle-constricted arc
arc that is constricted or shaped by the nozzle walls
10 166
vortex-constricted arc
arc that is constricted by a vortex produced by swirling liquid or gas
10 167
transferred arc
constricted arc that is struck between an electrode mounted within a torch and the workpiece
10 168
non-transferred arc
constricted arc that is struck between an electrode within a torch and a second electrode which forms a nozzle through which the plasma flows
10 169
partially transferred arc
constricted arc formed when the workpiece is connected to one terminal of the power supply and the other terminal is connected to an electrode within the torch; the torch nozzle also forms part of the electrical circuit and is at an intermediate potential
10 170
sleeve t
t where the ends of two pipes or round bars fit into a short length of pipe, the inside diameter of which approximates to the outside diameter of the two other
10 171
fixed shield
independently mounted device to provide protection from injury during welding or cutting
10 172
plain glass cover glass
clear glass or other transparent material used to protect the surface of welding glass from spatter
10 173
welding spectacles
spectacles fitted with welding glass, normally issued to persons whose duties require them to work in the vicinity of welding or cutting operations
10 174
welding goggles
protective device enclosing a space in front of the eyes to shield them from injury during welding or cutting, fitted with welding glass and plain glass
10 175
chipping goggles
protective device enclosing a space in front of the eyes to shield them from injury during chipping, grinding or cutting, fitted with plain glass
10 176
face mask
1) protective device worn in front of the face to shield it from injury during welding or cutting, fitted with welding glass and plain glass 2) protective device supplied with fresh air and worn over the nose and mouth
10 177
helmet head screen head shield
protective device ed on the head and arranged to shield the face and throat from injury during welding, fitted with a window consisting of welding glass and plain glass, and if necessary a heat filter
10 178
welding gloves
gloves to protect the hands, or gauntlets to protect the hands and forearms, from heat and metal splashes due to welding or cutting BSI 2008
.
15
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 179
open injector-mixer bunsen-type mixer
injector-mixer where the additional gas is drawn in from the atmosphere
10 180
closed injector- mixer
injector-mixer that is closed to the atmosphere, the entrained gas being drawn up through a tube connected to the unit
10 181
cone
more luminous part of a flame, which is adjacent to the nozzle orifice
10 182
feather
carbon-rich zone, visible in a flame, extending around and beyond the cone when there is an excess of carbonaceous gas
10 183
gas envelope
gas surrounding the inner cone of an oxy-fuel gas flame
10 184
threaded hose connection
threaded part (inlet or outlet) of a welding or cutting appliance to which a fitted hose is coupled NOTE Threaded hose connections, hose coupling nuts and hose couplers have right-hand threads for non-combustible gases and left-hand threads for combustible gases. Hose coupling nuts and hose couplers having left-hand threads are notched.
10 185
hose coupling nut union nut: deprecated
nut used for securing the hose coupling nipple to a threaded hose connection or to a hose coupler (See note to term 10 184.)
10 186
hose coupling nipple
metal component, one end of which is inserted into a hose, the other end has a seating and a shoulder around which can be rotated the hose coupling nut (See note to term 10 184.)
10 187
fitted hose
length of hose at each end of which is a hose coupling nipple and a hose coupling nut
10 188
hose coupler
component, consisting of a hexagonal centre portion with threaded ends, for connecting two lengths of fitted hose (See note to term 10 184.)
10 189
flame snap-out
unintentional extinction of the flame outside the nozzle orifice
10 190
gas economizer
auxiliary device designed for temporarily cutting off the supply of gas to the welding equipment, except the supply to a pilot jet where fitted
10 191
two-stage regulator
gas regulator in which the gas pressure is reduced to the working pressure in two stages
10 192
manifold regulator multi-stage regulator
gas regulator in which the gas pressure is reduced to the working pressure in more than one stage
10 193
flame arrestor flashback arrester
safety device fitted in a fuel gas system to prevent any flashback reaching the fuel gas pipeline or supply
10 194
hydraulic back pressure valve water-charged non-return safety valve fitted in an acetylene gas system to prevent flashback or back pressure from the blowpipe reaching the acetylene generator
10 195
flame normalizing
normalizing carried out by direct flame heating
10 196
interpulse time
period of time between successive pulses during the making of a single weld
10 197
welding cycle welding cycle time
period required to complete a welding cycle
10 198
weld timer
device that controls only the weld time
16
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 199
welding rectifier welding convertor rectifier converter
device that converts single or multiphase power from the frequency of the power supply to unidirectional current
10 200
stored-energy welding
method of welding in which the welding energy is stored in an inductor, a capacitor, an electric accumulator or a flywheel during a period of time relatively long compared to the welding time
10 201
burnt weld
weld in which the weld metal has been grossly overheated causing excessive oxidizing thereby reducing the strength of the t
10 202
weldability
ease with which a material or materials can be welded to give an acceptable t
10 203
plasma arc
transferred arc in which a constriction (mechanical or magnetic) is used to produce a thin pencil-like configuration of plasma and electrons to give a high heat concentration over a small area
10 204
plasma jet
jet or plasma formed by a non-transferred arc and expelled through an orifice at high velocity by gas pressure
10 205
plasma weld surfacing
surfacing or cladding in which the heat is provided by a plasma arc that may be transferred or partially transferred to the workpiece NOTE The cladding material may be applied as powder or as filler wire that is fused to the parent metal.
10 206
nozzle tip: deprecated
generally detachable part of a blowpipe from which gas or gases emerge
10 207
blowpipe head
part of a blowpipe to which a nozzle is fitted
10 208
blowpipe shank
part of a blowpipe that is normally held or gripped, to which are fixed the valves and threaded hose connections
10 209
combined blowpipe combined outfit: deprecated combined set: deprecated
blowpipe that, when fitted with the appropriate attachments, can be used for welding, cutting, heating or flame cleaning
10 210
head mixing blowpipe
blowpipe with a mixer or injector-mixer in the head
10 211
harsh flame
flame in which the velocity of the gases is higher than normal
10 212
soft flame
flame in which the velocity of the gases is lower than normal
10 213
dissolved acetylene
acetylene made stable under pressure by being dissolved in a liquid, e.g. acetone
10 214
groove weld
weld in a preparation made to receive weld metal
10 215
roll welding
welding with pressure in which a force is progressively applied by mechanically operated rolls after heating by different means
10 216
robot
programmable, multi-function manipulator
10 217
manipulation
operation of grasping and moving an object
10 218
adaptive control system control system
control method in which control parameters are continuously and automatically adjusted in response to measured process variables to achieve the specified performance
BSI 2008
.
17
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 219
t recognition
form of adaptive control that recognizes variations in the geometry detects changes in the t geometry and instructs the welding machine to take the appropriate corrective action
10 220
weld recognition weld feature recognition
form of adaptive control that recognizes variations in the geometry (including penetration depth) of the weld or weld pool being made and instructs the welding machine to take the appropriate corrective action
10 221
t tracking seam tracking
form of adaptive control that monitors changes in the location of the t to be welded and instructs the welding machine to take the appropriate corrective action
10 222
forehand welding
welding technique in which the welding torch or gun is pointed in the direction of welding
10 223
backhand welding
welding technique in which the welding torch or gun is pointed towards the completed weld, i.e. opposite to the direction of welding
18
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Section 2. relating to welding with pressure Subsection 21. relating to more than one subsection No.
Term
Definition
21 001
welding with pressure
welding in which sufficient outer force is applied to cause more or less plastic deformation of both the faying surfaces, generally without the addition of filler metal NOTE Usually, but not necessarily, the faying surfaces are heated in order to permit or to facilitate unifying.
21 002
interface
area when the welding force is applied
21 003
HF induction welding
welding in which an alternating electric current of at least 10 kHz is induced in the work to produce heat which in association with a forging action produces a t
21 004
upset metal upset
parent metal proud of the normal surfaces of the work as a result of forging or pressing
21 005
upset allowance
length allowed for the total shortening of both components due to upsetting
21 006
upset speed
rate of movement of the moving workpiece during upsetting
21 007
welding cycle
succession of operations effected by the machine for the making of a weld and the return to the initial position
21 008
upset force1)
force producing or tending to produce upset metal
21 010
upset pressure
pressure (force per unit area) resulting from the upset force
21 011
total allowance
In pressure, resistance butt, flash or friction welding, the length allowed, in preparation for welding, for the total shortening of both components due to all the operations that are actually used in the making of a weld
21 012
upset length
total actual shortening of both components due to the forging action in the making of a weld
21 013
forging force forge force
1) force applied normal to the faying surfaces to complete the weld 2) In friction welding, force applied normal to the faying surfaces at the time when relative movement between the components is ceasing or has ceased
21 015
forging time forge time
duration of application of the forging force
21 016
dwell
in resistance welding, maintain the electrode force after the cessation of current
21 017
dwell time
in fusion welding, time during which the energy source pauses at any point in each oscillation
21 020
oxy-fuel gas pressure welding
welding with pressure in which the workpieces are heated at the faying surfaces by an oxy-fuel gas flame and the weld is made by applying a force without addition of filler metal; the assembly may be of the open or closed type NOTE This process is illustrated in Figure 11.
1)
Force is sometimes incorrectly referred to as pressure. See 21 013 to 21 020. BSI 2008
.
19
BS 499-1:2009
Figure 11
BRITISH STANDARD
Oxy-fuel gas pressure welding
3 4
2
5
1
a) Closed assembly Key 1 Upset 2 Weld 3 Welding blowpipe
b) Opened assembly
4 5
Gas flame Workpiece
No.
Term
Definition
21 021
ultrasonic welding
welding process in which mechanical vibrations of low amplitude superimposed on a static force, and usually at frequencies above the audible limit, make a weld between two surfaces to be ed at a temperature well below the melting point of the parent metal NOTE Additional heat may or may not be applied.
21 022
diffusion welding
welding with pressure whereby the workpieces are kept in under specified continual pressure and are heated either on their faying surfaces, or in their entirety at a defined temperature over a controlled time (accompanied by a figure) NOTE This results in local plastic deformation and thereby intimate of the surfaces and diffusion of the atoms through the interface. This produces complete continuity of the material. The operation may take place in a vacuum, under a gas shield or in a fluid, preferably without the addition of a filler metal.
21 023
explosive cladding
cladding by explosive welding (see 26 001)
21 024
magnetically-impelled arc butt welding
welding process in which the faying surfaces of the workpieces are heated by a short duration arc between them and then brought together by the application of a force, the arc being impelled along the t line by magnetic fields NOTE The arc current can be either constant or increased in steps.
21 025
20
.
upsetting
BSI 2008
1) operation of locally increasing the cross-sectional area of a workpiece by the application of a longitudinal force 2) final operation of butt or flash welding comprising the application of a force to the ends of the workpieces after heating to welding temperature
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
21 026
pressure area
initial surface area of the components through which force is transmitted
21 027
forward force2)
force applied to the movable head of a welding machine in the direction necessary to make a weld
21 028
initial force2)
first steady or peak force applied normal to the interface, during the welding cycle
21 029
welding force2) welding load: deprecated
force, at the abutting surfaces of a workpiece, used to make a weld
21 030
post-weld upset force2)
force required to reduce the workpiece to its correct length after welding
21 031
post-heating force2)
force applied by the electrodes to the work during the time post-heating current is flowing
21 032
forward pressure
pressure (force per unit area) resulting from the forward force
21 033
initial pressure
pressure (force per unit area) resulting from the initial force
21 034
welding pressure
pressure (force per unit area) resulting from the welding force
21 035
post-weld upset pressure
pressure (force per unit area) resulting from the post-weld upset force
21 036
post-heating pressure
pressure (force per unit area) resulting from the post-heating force
21 037
overhang
distance a component projects from the die or clamp in the direction of the mating component for resistance butt, flash, friction, pressure or magnetically impelled arc butt welding
21 038
digital timer
apparatus for controlling intervals of time by means of counting, to a preset number, pulses which have a constant rate of repetition
21 039
analogue timer
apparatus for controlling intervals of time that relies upon any time dependent physical change
21 040
sequence timer
apparatus comprising a group of timers for controlling various functions in a welding cycle in a predetermined sequence
21 041
total loss
In pressure, resistance butt, flash, friction or magnetically impelled arc butt welding, total amount of shortening of both components due to all the operations that are actually used in the making of a weld
21 042
forge welding fire welding
welding with pressure in which the workpieces are heated in air in a forge and the weld is made by applying blows or some other impulsive force sufficient to cause permanent deformation at the interfaces
2)
Force is sometimes incorrectly referred to as pressure. See 21 032 to 21 036. BSI 2008
.
21
BS 499-1:2009
BRITISH STANDARD
Subsection 22. relating only to resistance welding No.
Term
Definition
22 001
resistance welding
welding with pressure in which the heat necessary for welding is produced by resistance to an electrical current flowing through the welding zone
22 002
resistance butt welding slow butt welding: deprecated upset butt welding: deprecated
resistance welding in which the components are butted together under pressure, and current is allowed to flow until the temperature is reached at which upset metal is produced and the weld is completed
22 003
flash welding flash butt welding: deprecated
resistance welding during which heating is obtained when the workpieces are progressively and repeatedly advanced towards each other, causing the current to flow through localized points, thus creating flashing and expulsion of molten metal
22 004
spot welding
resistance welding in which a weld is produced at a spot in the work-piece between electrodes, the weld being of approximately the same area as the electrode tips, or as the smaller of tips of differing size; force is applied to the spot, usually through the electrodes, continuously throughout the process
22 005
stitch welding
spot welding in which successive welds overlap
22 006
multiple spot welding
spot welding in which, by the use of more than two electrodes, two or more welds are made simultaneously or in an automatically controlled sequence
22 007
series spot welding
spot welding in which two or more welds are made simultaneously in electrical series (See Figure 12.)
Figure 12
22
.
Examples of series spot welding
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 008
seam welding
resistance welding in which force is applied continuously and current continuously or intermittently to produce a linear weld, the workpiece being between two electrode wheels or between an electrode wheel and an electrode bar; the wheels apply the force and current and rotate continuously during the making of the linear weld
22 010
projection welding
resistance welding in which the force and current are localized by the use of a projection or projections raised on or formed from one or more of the faying surfaces, the projections collapsing during welding
22 011
resistance stud welding
stud welding using projection welding (See 10 032 and 22 010)
22 012
percussion welding
welding with pressure employing the heat from an arc produced by a rapid discharge of electrical energy; pressure is applied percussively during or immediately following the electrical discharge
22 013
HF resistance welding
resistance welding in which an alternating electric current of at least 10 kHz is fed through s to the work to provide the heat for welding; the high frequency current concentrates along adjacent surfaces to produce highly localized heat prior to the application of welding force
22 014
cross-wire weld
resistance weld at the point of between crossed wires or rods made with pressure applied continuously
22 015
resistance welding electrode electrode
replaceable portion of a resistance welding machine that transmits current and applies force to the pieces to be welded
22 016
electrode shank
portion of an electrode for spot or stitch welding intended to be held by, and to make electrical with, an electrode holder
22 017
electrode wheel
seam welding electrode in the form of a rotating disc
22 018
flashing allowance
length allowed for the total shortening of both components due to flashing, in preparation for flash welding
22 020
electrode pressure
pressure (force per unit of electrode area) resulting from the electrode force
22 021
flashing time3)
In flash welding, period of time between the start of continuous flashing and the time when the upset force is applied
22 022
upset time3)
22 023
upset current time 3)
duration of upset travel 3)
time during which upset current flows In pulsation and seam welding, period of time between two successive heat times in the same welding cycle
22 024
cool time off-time
22 025
weld time3)
In resistance welding, duration of continuous flow of welding current
22 026
hold time3) dwell time
period of time between the cessation of current in a welding cycle and the cessation of electrode force
22 027
welding current
current (excluding preheating current) used to bring the workpiece to, and maintain it at, welding temperature
3)
Attention is drawn to Figures 14 to 25 for diagrammatic representation of these . BSI 2008
.
23
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 028
flashing current
current flowing during flashing time
22 030
flashing travel
distance travelled by the moving head during flashing
22 031
flashing speed
rate of travel of the moving head during flashing
22 032
throat depth throat
in resistance welding, usable distance from the centre of the platens or the axes of the electrodes or, in the case of oblique electrodes, the point of intersection of the electrode axes in the working position or the line of electrode wheels and that part of the equipment body located closest to it
22 033
throat gap
1) in spot and seam welding equipment, usable distance between the arms or the outer current-conducting parts of the welding circuit 2) in projection welding equipment, clamping distance between the platens
22 034
indirect spot welding
spot welding in which only one electrode tip is used per weld; a backing electrode or the workpiece itself completes the electrical circuit and resists the force of the electrode tip
22 035
forge delay time
period of time between the start of weld time and the instant of application of maximum welding force
22 036
backing electrode
plate or strip of current-carrying material used in place of an electrode on one side of the work to reduce the marking for multi spot, seam or projection welds
22 037
upset current
current flowing during upsetting
22 038
flashing loss
In flash welding, total actual shortening of both components during the flashing time
22 040
flashing
in flash welding, phenomenon occurring as the components are progressively advanced towards each other, when the current, confined to localized points of , causes repeated expulsion of molten metal
22 041
double-conductor connection cable comprising two conductors providing an electrical link cable between the secondary terminals of a resistance welding transformer and the welding set, and designed to have as low an electrical resistance as possible
22 042
single-conductor connection cable
cable comprising one conductor providing an electrical link between the secondary terminals of a resistance welding transformer and the welding set
22 043
staggered resistance welds
generally spot welds in two or more rows, in a staggered pattern (see Figure 14)
22 044
projection diameter
maximum diameter of individual projection [See Figure 13a), item 4] NOTE Illustration from BS EN ISO 17659.
24
.
BSI 2008
BRITISH STANDARD
Figure 13
BS 499-1:2009
Forms of projection welds
1
3
3
2
6
2 4
5
5
7
5 5 a) Round projections
b) Elongated projections
3 2 5 7
5
8 c) Annular projections
Key 1 Plate thickness 2 Pitch (of projections) 3 Projection height 4 Projection diameter
5 6 7 8
Edge distance Projection length Projection width Annular projection diameter
No.
Term
Definition
22 045
annular projection diameter
mean diameter of an annular projection [See Figure 13c), item 8] NOTE Illustration from BS EN ISO 17659.
22 046
nugget diameter
in resistance spot and projection welding, mean of the minimum and maximum diameters of the fused zone measured at the interface omitting the corona bond area
22 047
row pitch
perpendicular distance between rows of spot welds, aligned parallel to the t axis (see Figure 14, item 4) NOTE Illustration from BS EN ISO 17659.
BSI 2008
.
25
BS 499-1:2009
Figure 14
BRITISH STANDARD
Typical example of weld made using pressure – Double row of staggered, spaced spot welds
2
4
5
3 5
1 Key 1 Weld length 2 Weld pitch 3 Stagger
4 5
Figure 15
Row pitch Edge distance
Typical example of weld made using pressure – Projection weld
2
3
1 Key 1 Weld nugget 2 Nugget diameter
26
.
BSI 2008
3
Nugget thickness
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 048
pitch of projections
distance between adjacent projection centres in a direction parallel to the t line [see Figure 13a), item 2, Figure 13b), item 2, and Figure 13c), item 2]. NOTE Illustration from BS EN ISO 17659.
22 049
weld pitch
In a double row of spot welds, distance between adjacent weld centres in a direction parallel to the t line (same as ‘‘stagger’’; see Figure 14, item 2) NOTE Illustration from BS EN ISO 17659.
22 050
foil thickness
thickness of foil in a foil butt seam weld (see Figure 16, item 3) NOTE Illustration from BS EN ISO 17659.
Figure 16
Foil butt-seam weld
4 1 3 4
2 Key 1 Foil length 2 Foil width
22 051
nugget thickness
3 4
Foil thickness Foil surface
maximum height of nugget in the thickness direction (see Figure 15, item 3) NOTE Illustration from BS EN ISO 17659.
22 052
projection height
height of projection prior to welding [see Figure 13a), item 3, Figure 13b), item 3, and Figure 13c), item 3] NOTE Illustration from BS EN ISO 17659.
22 053
indentation
depression on the exterior surface or surfaces of a spot or seam weld
22 054
projection width
In elongated projections, width of projection, transverse to the t direction [see Figure 13b), item 7] In annular projections, difference between the inner and outer radius of an annular projection [see Figure 13c), item 7] NOTE Illustration from BS EN ISO 17659.
22 055
foil width
width of foil, measured transverse to the t axis (see Figure 16, item 2) NOTE Illustration from BS EN ISO 17659.
BSI 2008
.
27
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 056
projection length
length of an elongated projection [see Figure 13b), item 6] NOTE Illustration from BS EN ISO 17659.
22 057
foil length
length of foil, parallel to the t axis (see Figure 16, item 1) NOTE Illustration from BS EN ISO 17659.
22 058
weld nugget
Figure 17
zone in a spot, seam or projection weld where the metal has been melted (see Figure 17)
Weld nugget
No.
Term
Definition
22 059
indentation depth
depth of permanent indentation of t surface produced by electrode after welding (see Figure 18, item 5) NOTE Illustration from BS EN ISO 17659.
22 060
nugget overlap
width of re-melting of nugget by adjacent nugget (see Figure 19, item 3) NOTE Illustration from BS EN ISO 17659.
Figure 18
Typical example of weld made using pressure – Resistance spot welds
4
5
3 1 2 Key 1 Weld nugget 2 Nugget diameter 3 Nugget thickness
28
.
BSI 2008
4 5
Indentation Indentation depth
BRITISH STANDARD
BS 499-1:2009
Figure 19
Typical example of weld made using pressure – Seam weld
2
1
3 Key 1 Nugget diameter 2 Weld length
3
Nugget overlap
No.
Term
Definition
22 061
resistance weld setter
in resistance welding, person who sets up mechanized or automatic welding
22 062
foil surface
surface between foil and workpiece (see Figure 16, item 4) NOTE Illustration from BS EN ISO 17659.
22 063
mash seam weld
seam or stitch weld, between two components of similar thickness, where the amount of overlap determines the width of weld, so made that the ultimate thickness of the workpiece at the weld approximates to that of one component (see Figure 20)
22 064
nail head welding
variant of heated nozzle welding in which the end of one or two wires which has been fed through the nozzle and heated by a flame or electric discharge, forms a small globule, which under the effect of the applied force is flattened into the shape of a nail head (see Figure 21)
Figure 20
Mash weld
BSI 2008
.
29
BS 499-1:2009
BRITISH STANDARD
Figure 21
Nail head welding
3
4 2
5
1 6 Key 1 Flame 2 Molten metal globule 3 Power source
4 5 6
Nozzle Workpiece Weld
No.
Term
Definition
22 065
straight flash welding
flash welding technique in which flashing starts as soon as the workpieces are brought into and is maintained until upsetting takes place
22 066
flash welding with preheating flash welding technique in which preheating current is applied to the workpieces to facilitate the onset of flashing
22 067
roller spot welding
spot welding in which force is applied continuously and current intermittently to produce a line of separate spot welds, the workpieces being between two electrode wheels or between an electrode wheel and an electrode bar; the wheels apply the force and current and rotate continuously while the line of welds is being made
22 068
step-by-step roller spot welding
spot welding in which force is applied continuously and current intermittently to produce a line of separate spot welds, the workpieces being between two electrode wheels or between an electrode wheel and an electrode bar; the wheels apply the force and current and are stationary during the normal flow of current and rotate when reduced or no current is flowing
22 069
step-by-step seam welding
resistance welding in which force is applied continuously and current intermittently to produce a linear weld, the workpiece being between two electrode wheels or between an electrode wheel and an electrode bar; the wheels apply the force and current and are stationary during the normal flow of current and rotate when reduced or no current is flowing
30
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 070
step-by-step welding
seam or roller spot welding in which the electrode wheel is stationary during the age of weld current and rotates when reduced or no current is flowing
22 071
butt-seam welding
resistance welding applied progressively to a butt t; electrodes press on the work on each side of the t to current through it while welding force is generally applied by other means
22 072
foil butt-seam welding tape butt-seam welding
seam welding of two close square butted components with metal tape or wire placed or fed centrally to bridge one or both sides of the t (see Figure 16)
22 073
pulsation welding woodpecker welding: deprecated
spot or projection welding in which the welding current is interrupted one or more times without release of pressure or change of location of the electrodes
22 074
half-cycle welding
spot, projection or percussion welding in which the welding operation is completed in a whole or part of any one half cycle of the a.c. supply
22 075
electrode tip
surface of an electrode for spot or stitch welding intended to make with the workpiece
22 076
vertical electrode
electrode for spot or stitch welding in which the electrode tip is normal to the axis of the electrode shank
22 077
angle electrode inclined electrode
electrode for spot or stitch welding in which the electrode tip is not normal to the axis of the electrode shank
22 078
offset electrode
electrode for spot or stitch welding in which the electrode tip is not concentric with the axis of the electrode shank
22 079
vertical centre electrode straight electrode
vertical electrode where the electrode tip is concentric with the axis of the electrode shank (See Figure 22.)
22 080
vertical offset electrode
vertical electrode where the electrode tip is not concentric with the axis of the electrode shank (See Figure 23.)
Figure 22
Vertical centre electrode
Figure 23
Vertical offset electrode
No.
Term
Definition
22 081
angle offset electrode
angle electrode in which the electrode tip is not concentric with the axis of the electrode shank (see Figure 24)
22 082
cranked offset electrode cranked electrode
offset electrode in which the centreline of the electrode is not straight (see Figure 25) BSI 2008
.
31
BS 499-1:2009
Figure 24
BRITISH STANDARD
Angle offset electrode
Figure 25
Cranked offset electrode
No.
Term
Definition
22 083
pad electrode flat electrode
electrode having an area of with the work that is much larger than the weld required
22 084
tread
peripheral surface of an electrode wheel
22 085
electrode pick-up
contamination of the resistance welding electrode by metal or scale from the surface of the workpiece
22 086
surface pick-up
contamination of the surface of a resistance weld by particles of the electrode
22 087
welding die die
device for locating the components of a workpiece in a resistance welding machine and for transmitting force and welding current to them
22 088
insert
small piece of metal, usually hard wearing and of comparatively high resistivity, used as an electrode tip, or attached to a welding die and projecting sufficiently beyond it to make with the workpiece
22 089
platen
part of a resistance welding machine on which welding dies or bolsters can be mounted and which conveys force and welding current to them
22 090
bolster
electrode holder for mounting on a platen
22 091
arm
member projecting from a resistance welding machine, which carries current, or s a conductor carrying current, to an electrode holder and which is required to transmit or the welding force
22 092
fin
extrusion of metal extending outward beyond the upset metal in the form of a fin
22 093
splash
thin streaks of metal left adhering between the components or on their surfaces as the result of molten metal being expelled from a t or from under the electrodes during spot, seam, or projection welding
32
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 094
weld area interface: deprecated
area through which welding current es from one component to another during resistance welding
22 095
electrode area clamp area die area
area through which current es from an electrode or a clamp to the workpiece
22 096
backward force4) back pressure: deprecated
force tending to separate the electrodes
22 097
electrode force4)
force transmitted by the electrodes to the workpiece
22 098
backward pressure back pressure: deprecated
pressure (force per unit area) resulting from the backward force
22 099
hand-operated welding machine
welding machine in which the mechanical force is applied by hand
22 100
foot-operated welding machine pedal-operated welding machine
welding machine in which the mechanical force is applied by means of a pedal
22 101
power-operated welding machine
welding machine in which mechanical force is applied by an inanimate source of power
22 102
motor-operated welding machine
welding machine in which the travel of the electrode is provided and the mechanical force is applied by means of a motor-driven mechanism
22 103
portable spot-welding machine
spot-welding machine: a) that can be carried about complete, or b) in which the electrodes, the moving arms and the force application device have flexible connections to a fixed transformer and control equipment, thus providing a limited amount of portability
22 104
plier spot-welding machine pincer spot-welding machine
portable spot-welding machine in which force is applied to electrodes by means of a lever system similar to that of pliers
22 105
capacitor spot-welding machine5) condenser-discharge spot-welding machine
spot-welding machine in which welding current is caused to flow through the secondary winding of a transformer and the welding electrodes by the discharging of a capacitor through the primary winding of the transformer
22 106
inductor spot-welding machine5) induction spot-welding machine
spot-welding machine in which the welding current is caused to flow through the secondary winding of the transformer and the welding electrodes by the interruption of the flow of a direct current through the primary winding of the transformer
22 107
battery spot-welding machine5)
spot-welding machine in which a battery is used to provide the welding current
22 108
weld slug
piece of metal pulled from one sheet when a spot or projection weld is prised apart NOTE The diameter of the slug may be used for weld quality assessment.
4) 5)
Force is sometimes incorrectly referred to as pressure. See 22 020 and 22 098. These machines are sometimes referred to as ‘‘stored-energy machines’’. BSI 2008
.
33
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 109
preheat time
duration of preheating current NOTE In flash welding it is the time between the first age of current and the start of continuous flashing.
22 110
squeeze time6)
period of time between the normal application of force by the electrodes to the work and the first age of current
22 111
heat time6) on-time
duration of each successive current impulse, in pulsation and seam welding
22 112
step time6)
In roller spot welding and in step-by-step roller spot welding, period of time between successive weld times
22 113
chill time6) quench time
period of time between the end of welding current and the start of post-heating current
22 114
post-heat time6) 6)
duration of flow of post-heating current period of time between the cessation of current in one welding cycle and the beginning of current in the next
22 115
current-off time
22 116
pressure-off time6)
In spot, seam and projection welding, period of time between two successive welding cycles when no electrode force is being applied to the workpiece
22 117
preheating current
current used to raise the temperature of a workpiece from ambient temperature to a predetermined value below welding temperature just before the application of welding or flashing current
6)
34
Attention is drawn to Figures 26 to 37 for diagrammatic representations of these . .
BSI 2008
Time and pressure diagram for simple spot, stitch, or projection welding
Time and pressure diagram for pulsation spot or projection welding
Figure 26
Figure 27
BRITISH STANDARD BS 499-1:2009
BSI 2008
.
35
36
Figure 29
Figure 28
Time and pressure diagram for pulsation spot or projection welding, programme control
Time and pressure diagram for spot or projection welding, programme control
BS 499-1:2009
.
BSI 2008
BRITISH STANDARD
Time and pressure diagram for spot welding, programme control with dual-pressure cycle
Time and pressure diagram for seam welding
Figure 30
Figure 31
BRITISH STANDARD BS 499-1:2009
BSI 2008
.
37
38
Figure 33
Figure 32
Time and pressure diagram for roller spot welding
Time and pressure diagram for step-by-step seam welding
BS 499-1:2009
.
BSI 2008
BRITISH STANDARD
Time and pressure diagram for step-by-step roller spot welding
Time and platen movement diagram for straight flash welding
Figure 34
Figure 35
BRITISH STANDARD BS 499-1:2009
BSI 2008
.
39
Figure 36
Generalized diagram of speed, applied force, axial movement and time for continuous drive friction welding
BS 499-1:2009
40
.
BSI 2008
BRITISH STANDARD
Figure 36
Generalized diagram of speed, applied force, axial movement and time for continuous drive friction welding (concluded)
BRITISH STANDARD BS 499-1:2009
BSI 2008
.
41
Figure 37
Generalized diagram of speed, applied force and axial movement with time for stored energy friction welding
BS 499-1:2009
42
.
BSI 2008
BRITISH STANDARD
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 118
post-heating current
current that is ed through a completed weld to heat it, usually for metallurgical reasons
22 119
dual-pressure cycle
welding cycle characterized by the application of two different predetermined electrode forces
22 120
programme control
method of controlling a predetermined sequence of changes of current and/or force during a welding cycle
22 121
heat control
means of smoothly controlling the value of the current flowing through a resistance welding machine
22 122
constant current control
electronic control of the value of welding current, to make its preset value constant and independent of variations in either mains voltage or the amount of magnetic material introduced into the throat of the welding machine
22 123
synchronous control
electronic control system that ensures that the instant of closing the circuit to a resistance welding transformer is always at a preset electrical angle to the instant of zero voltage of the a.c. supply
22 124
non-synchronous control
control system that does not ensure that the instant of closing the circuit to a resistance welding transformer is repetitively at the same instantaneous voltage of the a.c. supply
22 125
phase shift
alteration of the phase relationship between two a.c. voltages NOTE Generally this is used to control the period of conduction in each half cycle of ignitron or thyristor ors.
22 126
phase angle firing angle
electrical angle between the instantaneous zero voltage applied to the anode of an ignitron or thyristor and the point at which it conducts in each half cycle
22 127
slope control
control of the rate of rise or decay of current and the time during which either takes place in the power circuit of a resistance welding machine NOTE This should not be confused with term 32 129.
22 128
rate of slope
rate of change of current when using slope control
22 129
slope time
duration of slope-up or slope-down
22 130
upset travel
1) In resistance butt welding. distance travelled by the moving platen in forging a weld from the point where the components are first brought together to the position where the weld is completed 2) In flash welding. distance travelled by the moving platen in forging a weld from the point where the components have been brought together at the end of flashing to the position where the weld is completed
22 131
preheating loss
total loss of length of both components during preheating a flash weld
22 132
machine stroke
maximum operational stroke obtainable
22 133
operational stroke
distance through which the electrode(s) may travel from rest to the final position during welding
22 134
die opening die gap
In a flash or resistance butt welding machine, distance between the opposing faces of the two pairs of dies when the machine is set up for welding
22 135
clamp opening
distance between the jaws of a clamp in the open position, through which the workpiece would be inserted or withdrawn BSI 2008
.
43
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 136
wearing depth
length or thickness of material that may be worn or dressed off the working surface of an electrode or die before it becomes unserviceable
22 137
parallel spot welding
spot welding in which the secondary current of the welding transformer is fed to two or more pairs of welding electrodes connected in parallel
22 138
push-pull series spot welding series spot welding using two pairs of electrodes and two transformers so that a transformer is connected to the top and bottom electrodes respectively thereby putting all in electrical series
22 139
unipolarity operation unipolarity welding
resistance welding in which succeeding welds are made with pulses of the same polarity
22 140
alternate polarity operation alternate polarity welding
resistance welding in which succeeding welds are made with pulses of opposite polarity
22 141
pre-weld time
period of time between the end of squeeze time and the beginning of welding current flow
22 142
post-weld time
period of time between the end of welding current flow and the start of hold time
22 143
weld delay time
time by which the beginning of welding current flow is delayed with respect to the initiation of the forge delay timer in order to synchronize the welding force with the welding current flow
22 144
weld heat time
In welding with slope control, period of time between the beginning of slope-up and the cessation of steady current or the start of slope-down
22 145
weld interval heat time
weld heat time as applied to pulsation welding
22 146
decay time
time during which decaying of a current takes place
22 147
decay current
current, applied to the primary of a three-phase frequency conversion welding machine transformer at a level below the welding current, that determines the decay time and rate of decay
22 148
current decay
current that decreases from an initial preset value to a final preset value at a rate depending upon the time constant of the circuit
22 149
electronic frequency converter
electronic device that converts the welding power from the frequency of the power supply to a different value
22 150
two-stage initiation
method of operation in which closure of the first stage of the initiation switch initiates the electrode force and closure of the second stage initiates the remainder of the welding cycle NOTE The closure of the second stage may, or may not, immediately follow the closure of the first stage. The first stage is non-beat after closing the second stage. The second stage is not capable of being initiated if the first stage is open.
22 151
repeat operation
method of operation in which once the weld cycle has been initiated it is repeated until the initiation switch is opened
22 152
non-repeat operation single operation
method of operation in which each initiation of the initiation switch provides one welding cycle only
22 153
non-beat
type of system that prevents any interruption of the welding cycle once the initiation switch has been operated
44
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 154
delayed non-beat
type of system which permits the interruption of the welding cycle only up to the end of squeeze time
22 155
gun welding head gun
force-producing and electrode-carrying assembly of a gun welding machine
22 156
dual gun control
method of control in which the welding cycle from one controller can be switched to either of two gun welding heads supplied from one transformer
22 157
dual gun dual welding cycle control dual gun dual sequence control
method of control in which the welding cycle to each of the gun welding heads supplied from one transformer can be controlled independently, the initiation circuit being interlocked to allow the operation of only one gun at a time
22 158
delayed firing
delayed initiation of the welding current in the first half cycle in order to minimize the initial transient of magnetizing current of the welding transformer
22 159
cascade firing sequence firing: deprecated
In multi-weld applications, system of switching in which each transformer or group of transformers is switched in succession, with or without current-off time during switching NOTE This system may be used to limit the supply load.
22 160
electrode face
surface of an electrode that makes with the workpiece
22 161
back plate
plate to which two or more bolsters can be bolted to hold them in their correct relative positions
22 162
back-up die
die into which may be inserted a number of removable inserts or electrodes
22 163
angle centre electrode
angle electrode in which the electrode tip is concentric with the electrode shank (see Figure 38)
22 164
swan-necked electrode double-cranked electrode
cranked offset electrode with a second bend (see Figure 39)
22 165
averaging time
time that is the sum of the maximum allowable conducting (on) time at maximum current and the minimum safe off time in a duty cycle for equipment which may be damaged by any thermal overload
Figure 38
Angle centre electrode
Figure 39
Swan-necked electrode
BSI 2008
.
45
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 166
welding pressure time
period during which the welding force is maintained in the making of a weld
22 167
post-heating pressure time
duration of electrode pressure associated with any post-heat treating cycle
22 168
head lowering time
period from the instant the electrode leaves the ‘‘at rest’’ position between successive welds to the instant of touching the workpiece
22 169
pressure application time
total time in any one welding cycle of the application of force by the electrodes to the workpiece
22 170
pressure decrease time
time taken for the force applied by the electrodes to the work to change from one steady value to a lower steady value or to zero
22 171
touch time
one period when two parts to be welded are in during reciprocating preheating for flash welding
22 172
heat diffusion time
one period when two parts to be welded are separated and no current is flowing between them during reciprocating preheating for flash welding
22 173
initial current
steady value of current applied before the commencement of slope-up in welding with slope control
22 174
final current
final steady value of current at the end of the slope-down period of a welding cycle
22 175
phase displacement
alteration of the phase relationship of two alternating electrical functions so that they do not through zero at the same time
22 176
cycle counter
electronic or electromechanical device for counting the number of cycles during a period of flow of an alternating current
22 177
cycle recorder
electronic or electromechanical device for recording, on paper or film, the number of cycles during a period of flow of an alternating current
22 178
modulator
electromechanical device to control the value of current during the heat and cool times in seam welding
22 179
multi-pressure cycle
welding in which more than one steady value of electrode force is used during any one welding cycle
22 180
high lift system
arrangement whereby the maximum electrode clearance for insertion and withdrawal of the workpiece is much greater than the operational stroke
22 181
electrode gap electrode clearance
distance between two corresponding electrode faces when the machine is ready for operation
22 182
follow-up
movement of an electrode assembly that keeps the electrode force applied while surface indentation or collapse is occurring on the workpiece
22 183
preheating allowance
In flash welding, length allowed for the total shortening of both components due to a preheating operation
22 184
push gun poke gun
gun welding head with which the welder applies the welding force by direct manual pushing
46
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 185
expansion gun reaction gun
gun welding head that can be used between a workpiece and a fixed member and which derives the welding force by longitudinal expansion
22 186
rocker arm
moveable arm of a welding machine which is pivoted approximately centrally and is pushed upward at one end to bring down the end that carries the moving electrode into with the fixed electrode
22 187
rotary welding transformer
transformer for a butt-seam welding machine that is connected solidly to the wheel electrodes and rotates with them, while the primary current at mains voltage is led in through slip rings
22 188
welding pressure head pressure head
assembly of those parts of a welding machine that produce the force required for welding
22 189
electrode wheel head
part of a seam welding machine that carries the electrode wheel that is lowered and raised to and from the workpiece
22 190
weld-through sealer
mastic gap-filling material that is applied prior to resistance welding to an unpainted metal surface for non-pressure sealing purposes and does not prevent the making of a satisfactory weld
Subsection 23. relating only to friction welding No.
Term
Definition
23 001
friction welding
welding with pressure in which the interfaces are heated by friction by relative movement of the t faces, normally by rotating one or both workpieces in with each other or by means of a separate rotating friction element; the weld is completed by an upset force, generally after rotation has ceased (see Figure 36 and Figure 37)
23 002
friction force
force(s) applied normal to the faying surfaces during the time that there is relative movement between the components
23 003
friction pressure
pressure (force per unit area) on the faying surfaces resulting from the friction force
23 004
friction speed
rate of relative movement of the components
23 005
friction time
time during which relative movement between the components takes place at friction speed and under application of the friction force
23 006
forging speed
in friction welding, relative velocity of the workpieces at the instant the forge force is applied
23 007
burn-off length
overall length loss of the components during the application of the friction force
23 008
flash
metal extruded during friction welding
23 009
friction stir welding
friction welding where heat is generated by friction between a rotating non-consumable spindle and stationary workpieces (see Subsection 27)
23 010
friction welding forge force
longitudinal force applied to the faying surfaces at the time when relative movement between the components is ceasing or has ceased
BSI 2008
.
47
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
23 011
forging pressure forge pressure
pressure (force per unit area) resulting from the forging force
23 012
forge length
amount by which the overall length of the components is reduced during the application of the forge force
23 013
forge rate
rate of shortening of the components during the application of the forge force
23 014
stopping time
time required by the moving component to decelerate from friction speed to zero speed
Subsection 24. relating only to pressure welding No.
Term
Definition
24 001
pressure welding solid-phase welding
welding process in which a weld is made by a sufficient pressure to cause plastic flow of the surfaces, which may or may not be heated
24 002
HF pressure welding
pressure welding in which heat derived from a high frequency alternating electric current of at least 10 kHz, induced or conducted into the workpiece, is used to make plastic the surfaces to be united
24 003
oxy-acetylene pressure welding
pressure welding in which an oxy-acetylene flame is used to make plastic the surfaces to be united NOTE Other fuel gases are sometimes used and in such cases appropriate alterations to the term and the definition are necessary.
24 004
constant-pressure pressure welding
pressure welding in which the weld is made during the period of increasing temperature at a substantially constant pressure
24 005
constant-temperature pressure welding
pressure welding in which the weld is made during the application of increasing pressure at a substantially constant temperature
24 006
cold pressure welding
pressure welding in which pressure alone is used
24 007
heating time
in constant-temperature pressure welding, time during which the parts are heated before the application of the upsetting force
24 008
upsetting time
In constant-temperature pressure welding, time during which the parts to be ed are maintained at the welding temperature and under the upsetting force
24 009
welding time
sum of the heating time and the upsetting time
24 010
deformation
local percentage reduction in the total thickness of sheets or plates at a pressure-welded lap t
Subsection 25. relating only to diffusion welding No.
Term
Definition
25 001
diffusion welding
ing process wherein all the faces to be welded are held together by a pressure insufficient to cause readily detectable plastic flow, at a temperature below the melting point of any of the parts, the resulting solid state diffusion, with or without the formation of a liquid phase, causing welding to occur
48
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
25 002
solid state diffusion welding
diffusion welding in which all the reactions occur in the solid state
25 003
liquid phase diffusion welding
diffusion welding in which solid state interdiffusion between dissimilar materials results in the formation of a liquid phase
Subsection 26. relating only to explosive welding No.
Term
Definition
26 001
explosive welding
pressure welding process to make lap ts or cladding in which the overlapping workpieces are welded when impacted together by the detonation of an explosive charge
26 002
parent plate; static plate
stationary plate in a lap t or plate to be clad
26 003
flyer plate
moving plate in a lap t or the cladding to be applied to the parent plate
26 004
anvil
on which the parent plate rests
26 005
buffer
solid material placed between the explosive and the flyer plate to transmit the explosive force and to protect the flyer plate
26 006
initial plate angle initial inclination
angle of inclination between the flyer plate and the parent plate before welding
26 007
collision angle angle
angle of inclination between the flyer plate and the parent plate during welding
26 008
stand-off distance stand-off gap
distance between the plates in a parallel assembly
26 009
collision front
three-dimensional line of collision points or lines of
26 010
jet
air, expelled from between the plates during the explosion, which cleanses the two surfaces to be ed
26 011
shocked metal zone
parts of the plates that are metallurgically affected by the impact
26 012
blending taper
conically prepared end of a tube usually for tube to tube-plate welding
26 013
distortion plug distortion bung
plugs inserted into vacant holes of a tube-plate to prevent the distortion of the ligament by welds carried out in the adjacent holes
Subsection 27. relating only to friction stir welding No.
Term
Definition
27 001
tool
rotating component that includes the shoulder and probe (see Figure 40)
27 002
probe
part of the tool that extends into the workpiece to make the weld (see Figure 40 and Figure 41) NOTE The probe can be either fixed or adjustable.
27 003
z-direction
direction parallel to the tool axis (see Figure 40)
BSI 2008
.
49
BS 499-1:2009
BRITISH STANDARD
27 004
x-direction
direction parallel to the direction of travel in the plane of the workpiece (see Figure 40)
27 005
y-direction
direction normal to the direction of travel in the plane of the workpiece (see Figure 40)
Figure 40
Basic principle of friction stir welding
X
Y Z 2
3 4
1
5
6
8 7
Key 1 Workpiece 2 Tool 3 Probe 4 Shoulder
Figure 41
5 6 7 8
Advancing side of weld Retreating side of weld Weld surface Exit hole
Macrosection of a butt weld showing incomplete penetration
1 2 4
3 Key 1 Workpiece 2 Probe 50
.
BSI 2008
3 4
Original t line – no deformation Original t line – severely plastically deformed
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
27 006
fixed probe
probe that has a fixed length protruding from the shoulder and its rotation is the same as the shoulder during welding
27 007
shoulder
surface of the tool that s the workpiece during welding (see Figure 40 and Figure 42)
27 008
adjustable probe tool
probe that has adjustable length and its rotation may be different from the shoulder during welding (see Figure 43) NOTE 1 An adjustable probe may be used as a fixed probe. NOTE 2 This tool enables ing to be accomplished without creating excessive toe flash at the start, or an exit hole at the finish.
27 009
heel
part of the tool shoulder that is at the rear of the tool relative to its forward motion (see Figure 42) Figure 42
Heel and heel plunge depth
8
7
9
6
3 1
5
Key 1 Workpiece 2 Probe 3 Shoulder 4 Heel
Figure 43
4
2 5 6 7 8 9
Heel plunge depth Rotary motion Down force Tilt angle Direction of travel
Adjustable probe tool 2
1 Key 1 Workpiece
2
Adjustable probe tool
BSI 2008
.
51
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
27 010
fixed bobbin tool
tool with two shoulders separated by a fixed length probe (see Figure 44)
27 011
self-reacting bobbin tool
tool with two shoulders separated by a probe whose length can be adjusted during welding (see Figure 45) NOTE The self-reacting bobbin tool allows the shoulders to automatically maintain with the workpiece.
Figure 44
Fixed bobbin tool
2
1 3 5 Key 1 Workpiece 2 Bobbin tool 3 Upper shoulder
Figure 45
4 5
4 Probe Lower shoulder
Self-reacting bobbin tool
2
6
1
3 5
Key 1 Workpiece 2 Top shoulder 3 Probe
52
.
BSI 2008
4
4 5
Bottom shoulder Reactive forces
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
27 012
position control
method to provide the required position of the tool during welding
27 013
lateral offset
distance from the tool axis to the root face
27 014
tilt angle travel angle
angle between the normal to the plane of the workpiece surface and the tool axis measured in the Z-X plane of travel of the tool axis (see Figure 42)
27 015
sideways tilt angle work angle
angle between the normal to the plane of the workpiece surface and the tool axis measured in the Z-Y plane normal to the direction of travel of the tool
27 016
tool plunge depth
inserting the tool into the workpiece in order to make a weld
27 017
heel plunge depth
distance the heel extends into the parent material (see Figure 42)
27 018
advancing side
side of the weld where the direction of tool rotation is the same as the welding direction (see Figure 40)
27 019
retreating side
side of the weld where the direction of tool rotation is opposite to the welding direction (see Figure 40)
27 020
force control
method to provide the required force on the tool during welding
27 021
down force traversing force z-force
axial force applied in the z-direction by the tool to the workpiece during welding in the x-direction (see Figure 42)
27 022
sideways force y-force
Force experienced in the y-direction by the tool to the workpiece during welding in the x-direction
27 023
traversing force x-force
force applied in the x-direction by the tool to the workpiece during welding in the x-direction
27 024
travel speed welding speed traversing speed traversing rate
In friction stir welding, distance travelled by the probe axis, in a direction parallel to the t axis, per unit time NOTE No is taken of any lateral oscillation of the probe axis.
27 025
dwell time at start of weld
time interval between when the rotating tool reaches its maximum depth in the parent material and the start of travel
27 026
dwell time at end of weld
time interval after travel has stopped but before the rotating tool has begun to withdraw from the weld
27 027
heat affected zone HAZ
area affected only by heat with no visible macroplastic deformation detectable by using optical microscopy (see Figure 46)
27 028
thermomechanically affected area affected by both heat and macroplastic deformation (see zone Figure 46) TMAZ
27 029
nugget
part of the TMAZ where the microstructure has been subject to recrystalization (see Figure 46) NOTE In most aluminium alloys, the nugget is bounded by unrecrystalized TMAZ. In many other alloys, the nugget extends most or all of the TMAZ, and possibly into the HAZ.
BSI 2008
.
53
BS 499-1:2009
BRITISH STANDARD
Figure 46
1
Cross-section of a friction stir weld
2
Key 1 Parent material 2 Heat affected zone (HAZ)
3
3 4
4(+3)
3
2
1
Thermomechanically affected zone (TMAZ) Nugget
No.
Term
Definition
27 030
exit hole
hole remaining at the end of a weld after the withdrawal of the tool (see Figure 40 and Figure 47)
27 031
shoulder footprint
partially or fully formed ring surrounding the exit hole (see Figure 47)
Figure 47
Tool shoulder footprint visible at the exit hole
3 1
4
2 Key 1 Workpiece 2 Shoulder footprint
3 4
Exit hole Weld surface
No.
Term
Definition
27 032
flash
imperfection consisting of excessive metal protruding upwards at the weld toe
27 033
underfill
depression resulting when the weld face is below the adjacent parent material surface
27 034
incomplete penetration
imperfection where the full thickness of the t has not been welded (see Figure 41)
54
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
27 035
void volumetric flaw
non-planar discontinuity in the TMAZ which may be buried or surface breaking NOTE The extent may be classified as continuous, sporadic, isolated or clustered, fine, coarse, etc.
27 036
t line remnant
imperfection consisting of a semi-continuous layer of oxide in the weld NOTE The severity of this imperfection depends upon its extent and the proximity of the adjacent oxide particles. t line remnants can have some effect on the mechanical performance of the t.
27 037
kissing bond
weakly bonded t line remnant in the root region, often difficult to detect non-destructively
27 038
hook
curved notch on the advancing side of the lap weld (see Figure 48, T3)
27 039
lap t sheet thinning
workpiece thickness minus the distance from the weld face to the end of the hook (see Figure 48) NOTE In Figure 48, the sheet thinning in the lap t is T1 – T2 or T1 – T3.
BSI 2008
.
55
BS 499-1:2009
Figure 48
BRITISH STANDARD
Cross-section of friction stir lap weld showing undesirable/extreme plate thinning on the retreating side and a hook feature on the advancing side of the weld
T2
T1
T3
a) Upper plate thinning Key T1 Sheet thickness T2 Retreating side, sheet thickness T3 Advancing side, sheet thickness
1
2
4
3
b) Lower plate thinning
1 2 6
5 c) Ideal situation Key 1 Upper workpiece 2 Lower workpiece 3 Retreating side, notch tip orientation away from shoulder side
56
.
BSI 2008
4 5 6
Advancing side, notch tip orientation away from shoulder side Retreating side, notch tip abrupt end Advancing side, notch tip abrupt end
BRITISH STANDARD
BS 499-1:2009
Section 3. relating to fusion welding (welding without pressure) Subsection 31. relating to more than one subsection No.
Term
Definition
31 001
fusion welding
welding without application of external force in which the faying surface(s) has (have) to be molten; usually, but not necessarily, molten filler metal is added
31 002
back-step sequence
welding sequence in which short lengths of run are deposited in a direction opposite to the general progress of welding the t (see Figure 49)
Figure 49
Example of back-step sequence
No.
Term
Definition
31 003
back-step welding
welding following a back-step sequence
31 004
continuous weld
weld extending along the entire length of a t
31 005
intermittent weld
series of welds of the same type and dimensions at intervals along a t
31 006
butt weld
1) In a butt t. weld between two parts making an angle to one another of 135º to 180º inclusive in the region of the weld such that a line parallel to a surface of one part, perpendicular to the line of the t, and ing through the centre of the fusion face of that part, es through the fusion face of the other part (see Figure 50.1 to Figure 50.11, Figure 50.13, Figure 50.15 and Figure 50.16) 2) In a T-t. weld between two parts making an angle to one another of 45º to 90º inclusive in the region of the weld such that a line parallel to a surface of one part, perpendicular to the line of the t, and ing through the centre of the fusion face of that part, es through the fusion face of the other part (see Figure 50.19, Figure 50.21, Figure 50.23 and Figure 50.24) 3) In a corner t. weld between two parts making an angle to one another of 45º to 135º inclusive in the region of the weld such that a line parallel to a surface of one part, perpendicular to the line of the t, and ing through the centre of the fusion face of that part, es through the fusion face of the other part (see Figure 50.32)
BSI 2008
.
57
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 007
square butt weld
butt weld in the preparation for which the fusion faces lie approximately at right angles to the surfaces of the components to be ed and are substantially parallel to one another (see Figure 50.1 to Figure 50.6)
31 008
single-V butt weld
butt weld in the preparation for which the edges of both parts are bevelled so that in cross section the fusion faces form a V (see Figure 50.7 to Figure 50.9)
31 009
staggered intermittent weld
intermittent weld on each side of a t (usually fillet welds in T and lap ts) arranged so that the welds on one side lie opposite to the spaces on the other side along the t
31 010
double-V butt weld
butt weld in the preparation for which the edges of both components are double bevelled so that in cross section the fusion faces form two opposing V s (see Figure 50.10, Figure 50.11 and Figure 50.13)
31 011
single-U butt weld
butt weld in the preparation for which the edges of both components are prepared so that in cross section the fusion faces form a U
Figure 50
Sketches of types of ts, types of weld(s) and weld preparations
Figure no.
58
Sketch
Type of t
Type of weld(s)
Preparation
Remarks
50.1
Butt
Butt
Close square
Full penetration
50.2
Butt
Butt
Close square
Full penetration
50.3
Butt
Butt
Raised edges
—
50.4
Butt
Butt
Close square
Partial penetration
50.5
Butt
Butt
Open square with backing bar
Full penetration
50.6
Butt
Butt
Close square
Full penetration. Welded from both sides
50.7
Butt
Butt
Single-V with root faces.
Full penetration
50.8
Butt
Butt
Single-V with backing strip
Full penetration
50.9
Butt
Butt
Single-V with root faces
Full penetration. Sealing run used
.
BSI 2008
BRITISH STANDARD
Figure 50 Figure no.
BS 499-1:2009
Sketches of types of ts, types of weld(s) and weld preparations (continued) Sketch
Type of t
Type of weld(s)
Preparation
Remarks
50.10
Butt
Butt
Double-V with root faces
Full penetration. Welded from both sides
50.11
Butt
Butt
Double-V with broad root faces
Partial penetration. Welded from both sides
50.12
Butt
Butt and fillet
Single-V with broad root faces
Partial penetration. Welded from both sides
50.13
Butt
Butt
Double-V with root faces
Full penetration. Welded from both sides
50.14
Butt
Fillet
Close square
Welded from both sides
50.15
Butt
Butt
Single-bevel with root face
Full penetration
50.16
Butt
Butt
Single-bevel with root face. Thicker plate tapered
Full penetration. Sealing run used
50.17
Butt
Compound of butt and fillet
Single-bevel with root face
Full penetration. Sealing run used
50.18
Butt
Compound of butt and fillet
Single-bevel with root face
Full penetration. Welded from both sides
50.19
T
Butt
Single-bevel with root face
Full penetration
BSI 2008
.
59
BS 499-1:2009
Figure 50 Figure no.
60
BRITISH STANDARD
Sketches of types of ts, types of weld(s) and weld preparations (continued) Type of t
Type of weld(s)
Preparation
Remarks
50.20
T
Fillet
Close square
Welded from both sides
50.21
T
Butt
Doublebevel
Full penetration. Welded from both sides
50.22
T
Compound of butt and fillets
Doublebevel
Full penetration. Welded from both sides
50.23
T
Butt
Doublebevel with wide or deep root face
Partial penetration. Welded from both sides
50.24
T
Butt
Single-bevel
Full penetration
50.25
T
Fillet
Edge prepared as necessary
—
50.26
Cruciform
Butt
Doublebevel
Welded from both sides
50.27
Cruciform
Fillet
Close square
Welded from both sides
50.28
Lap
Fillet
Square edge
—
.
Sketch
BSI 2008
BRITISH STANDARD
Figure 50 Figure no.
BS 499-1:2009
Sketches of types of ts, types of weld(s) and weld preparations (concluded) Sketch
Type of t
Type of weld(s)
Preparation
Remarks
50.29
Lap
Plug
Holes(s) of any shape in one plate
—
50.30
Lap
Fillet
Hole(s) of any shape in one plate
Welded all round
50.31
Lap
Fusion spot
None
—
50.32
Corner
Butt
Single-bevel with root face
Full penetration
50.33
Corner
Fillet
Edge prepared as necessary
—
50.34
Corner
Fillets
Square edge
Welded from both sides
50.35
Corner
Fillets
Square edge
Partially-lapped corner. Welded from both sides
50.36
Edge
Edge
Square edge
Edges fully covered
No.
Term
Definition
31 012
double-U butt weld
butt weld in the preparation for which the edges of both components are prepared so that in cross section the fusion faces form two opposing Us having a common base
31 013
single-J butt weld
butt weld in the preparation for which the edge of one component is prepared so that in cross section the fusion face is in the form of a J and the fusion face of the other component is at right angles to the surfaces of the first component
31 014
double-J butt weld
butt weld in the preparation for which the edge of one component is prepared so that in cross section the fusion face is in the form of two opposing Js and the fusion face of the other component is at right angles to the surfaces of the first component
BSI 2008
.
61
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 015
fillet weld
fusion weld, other than a butt, edge or fusion spot weld, which is approximately triangular in transverse cross section (examples are shown in Figure 50.14, Figure 50.20, Figure 50.25, Figure 50.27, Figure 50.28, Figure 50.30, Figure 50.33, Figure 50.34 and Figure 50.35)
31 016
tack weld
weld used to assist assembly or to maintain alignment of edges during welding
31 017
plug weld
weld made by filling a hole in one component of a workpiece with filler metal so as to it to the surface of an overlapping component exposed through the hole (see Figure 50.29)
31 018
seal weld sealing weld
weld intended primarily to provide tightness against leakage of gas or fluid
31 020
edge weld
weld in an edge t, other than a seal weld, used for ing two or more parts and in which the weld metal covers part or the whole of the edge widths (see Figure 50.36)
31 021
butt t
connection between the ends or edges of two parts making an angle to one another of 135º to 180º inclusive in the region of the t (see Figures 50.1 to 50.18)
31 022
T-t
connection between the end or edge of one part and the face of the other part, the parts making an angle to one another of more than 5º up to and including 90º in the region of the t (see Figures 50.19 to 50.25)
31 026
lap t
connection between two overlapping parts making an angle to one another of 0º to 5º inclusive in the region of the weld or welds (see Figures 50.28 to 50.31)
31 027
corner t
connection between the ends or edges of two parts making an angle to one another of more than 30º but less than 135º in the region of the t (see Figures 50.32 to 50.35)
31 028
edge t
connection between the edges of two parts making an angle to one another of 0º to 30º inclusive in the region of the t (see Figure 50.36)
31 031
root face nose: deprecated
portion of a fusion face at the root that is not bevelled or grooved (see Figure 51)
31 034
feather edge
edge formed at the root due to bevelling being carried through from one surface to the other
31 035
land
straight portion of a fusion face between the root face and the curved part of a J-edge preparation
31 036
edge preparation end preparation7)
surface prepared on the edge of a component to be welded
31 037
toe weld edge: deprecated
boundary between a weld face and the parent metal or between runs (see Figure 52) NOTE The term ‘‘toe’’ should always be qualified according to whether it applies to the complete weld or to individual runs.
31 038
7)
62
angle of bevel angle of preparation: deprecated
angle at which the edge of a component is prepared for making a weld measured from the normal to the direction of the component (see Figure 51)
This term is applied only to strip and pipes or tubes. .
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 040
included angle angle of preparation
angle between the planes of the fusion faces of parts to be welded (see Figure 51)
31 041
root radius
radius of the curved portion of the fusion face in a component prepared for a single-J, single-U, double-J or double-U weld (see Figure 51)
31 043
leg length size
distance from the actual or projected intersection of the fusion faces and the toe of a fillet weld, measured across the fusion face (see Figure 52) NOTE 1 For a 90º fillet weld having equal leg lengths, the term ‘‘size’’ has been used to mean leg length for a convex or mitre fillet weld or 1.4 times the design throat thickness for a concave fillet weld. In some applications ‘‘size’’ has been used to mean design throat thickness and therefore to avoid confusion ‘‘size’’ has been dropped as a preferred term. NOTE 2 In specifying a fillet weld the dimensions should now be clearly indicated as minimum leg length(s) or design throat thickness or both as appropriate.
BSI 2008
.
63
BS 499-1:2009
Figure 51
BRITISH STANDARD
Dimensions of root gap, root face, root radius, land, included angle and angle of bevel for typical weld preparations Included angle
Included angle Angle of bevel
Angle of bevel
Depth of root face Root gap
Depth of root face
a) Single sided V-butt
Root radius
Root gap b) Single sided U-butt
Included angle
Included angle Angle of bevel
Angle of bevel Depth of root face
Root radius
Depth of root face
Root gap
Root gap
c) Double sided V-butt
d) Double sided U-butt
Included angle and angle of bevel
Included angle and angle of bevel
Depth of root face Depth of root face Root radius Root gap
Root gap Width of land
e) Single sided level T-butt
64
.
BSI 2008
f) Single sided J T-butt
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 044
actual throat thickness throat thickness
fillet welds, the value of the height of the largest isosceles triangle that can be inscribed in the section of the finalized weld butt welds, the minimum distance from the surface of the part to the bottom of the penetration (for examples see Figure 53) NOTE This is an arbitrary dimension that might not have particular relevance to design.
31 045
design throat thickness
throat thickness specified by the designer (for examples see Figure 53)
31 046
effective throat thickness
minimum distance between the root and the cap in a completed weld NOTE This may be used for assessment purposes.
31 047
weld width
shortest distance between the outer toes of a weld face (see Figure 52)
31 050
excess weld metal reinforcement overfill
weld metal lying outside the plane ing the toes (see Figure 54)
BSI 2008
.
65
BS 499-1:2009
Figure 52
66
.
Examples of toes, legs, weld widths and fusion faces
BSI 2008
BRITISH STANDARD
BRITISH STANDARD
Figure 53
E
BS 499-1:2009
Examples of actual, effective, design and maximum throat thickness of typical welds
A
D
M
a) Full penetration single V butt with sealing run
D
A
E
M
E
D
A
b) Partial penetration single V butt
D E
A
c) Full penetration single level T butt with sealing run
M
M
d) Convex fillet weld
E D
E D
A
e) Concave fillet weld
A
M
M
f) Fillet weld with root gap and root penetration
Key Preparation face
Final t surface
Nominal weld zone
Dimension line drawn through toes
Actual fusion boundary E Effective throat thickness D Design throat thickness
A Actual throat thickness M Maximum throat thickness
NOTE The positions of the dimension lines are shown correctly for the geometries illustrated but might vary for other cap and root profiles.
BSI 2008
.
67
BS 499-1:2009
Figure 54
No.
BRITISH STANDARD
Examples of excess weld metal
Term
31 051
weld slope S
Definition 8)
In the case of straight welds, angle between the root line and the positive x-axis of the horizontal reference plane (see Figure 55); the slope, is measured in mathematically positive (i.e. counter-clockwise) direction NOTE The co-ordination system is arranged so that the root line lies in the vertical reference plane, i.e. x/z-plane, (see Figure 55) and that the working direction radiates outward from the coordinate origin. In the case of curved welds, the same stipulation applies, the slope is obtained from the tangent to the root line, at the particular cross section of the weld in question and the x-axis.
31 052
weld rotation9) R
angle between the centreline of the weld (i.e. the line ing the centres of the weld root at the capping layer) and the positive z-axis or a line parallel to the y-axis, measured in the mathematically positive (i.e. counter-clockwise) direction in the plane of the transverse cross section of the weld in question
31 053
welding position
orientation of a weld expressed in of working position, weld slope and weld rotation
31 054
flat position downhand position: deprecated
welding position in which the welding is horizontal, with the centreline of the weld vertical (see Table 1)
31 055
horizontal vertical position
welding position in which the welding is horizontal (see Table 1)
31 056
vertical up position
welding position in which the welding is upwards (see Table 1)
31 057
vertical down position
welding position in which the welding is downwards (see Table 1)
8)
9)
68
The main positions, defined by weld slope and weld rotation, are given in Table 1 and illustrated in Figure 57 and Figure 58. A comparison between the BS form of designation (based on the AWS/ANSI form) and the form given in ISO 6947 is shown in Figure 58. For the sake of clarity, symbols for the main working positions are given from the coordinate origin, the working direction being outwards. This term is applied only to strip and pipes or tubes. .
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 058
horizontal overhead position welding position in which the welding is horizontal and overhead (see Table 1)
31 060
horizontal position
welding position in which the welding is horizontal, with the centreline of the weld horizontal (see Table 1)
31 061
overhead position
welding position in which the welding is horizontal and overhead, with the centreline of the weld vertical (see Table 1)
31 062
inclined position
any welding position not defined by the above positions, defined by slope and rotation
31 063
manipulator positioner
device to hold, tilt and rotate the workpiece to the desired position
31 064
bead
single run of weld metal on a surface Table 1
A)
and symbols for main welding positions
31 054 Flat position
31 055 Horizontal vertical position
31 060 Horizontal position
31 058 Horizontal overhead position
31 061 Overhead position
Symbol
PA
PB
PC
PD
PE
Weld slope
Weld rotation
S
R
0º
180º
90º
90º
0º
45º
0º
135º
180º
45º
180º
135º
0º
0º
0º
180º
180º
0º
180º
180º
0º
225º
0º
315º
180º
225º
180º
315º
0º
270º
180º
270º
31 056 Vertical up position
PF
90º
—
31 057 Vertical down position
PG
270º
—
NOTE 1 To avoid confusion with existing abbreviations, e.g. F for flat, in principle the letter ‘‘P’’ (for position) has been placed in front of the symbol to indicate ‘‘main position’’. NOTE 2 Tolerances for the main positions are not specified in this British Standard because they depend on the different welding procedures used. A)
In accordance with ISO 6947.
BSI 2008
.
69
BS 499-1:2009
Figure 55
Welding positions: slope (S)
Figure 56
Schematic diagram of main welding positions
70
.
BSI 2008
BRITISH STANDARD
BRITISH STANDARD
BS 499-1:2009
Figure 57
Figure 58
Simplified view of main welding positions
Comparison of UK (USA) and ISO welding positions UK (USA)
ISO
1G
PA
2G
PC
3G
PF Vertical up PG Vertical down
4G
PE
5G
PF Vertical up PG Vertical down
BSI 2008
.
71
BS 499-1:2009
Figure 58
BRITISH STANDARD
Comparison of UK (USA) and ISO welding positions (concluded) UK (USA)
ISO
6G
H-L045
1F
L 45/PA
1FR
L 45/PA
2F
PB
2FR
PB
3F
PF Vertical up PG Vertical down
4F
PD
5F
PF Vertical up PF Vertical down
72
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 066
full penetration welding
welding using a technique which ensures that the weld metal fully penetrates the t with complete root fusion
31 067
partial penetration weld
weld in which the fusion penetration is intentionally less than full penetration
31 068
root run root
first run deposited in the root of a multi-run weld
31 070
sealing run
final run deposited on the root side of a fusion weld NOTE This should not be confused with term 31 018.
31 071
melt run
line of parent metal that has been melted by ing a welding flame or arc along the surface of the metal
31 072
weld pool
pool of liquid metal formed during fusion welding NOTE In electroslag welding the term includes the slag bath.
31 073
run-on plate
piece of metal so placed as to enable the full section of weld metal to be obtained at the beginning of a t
31 074
run-off plate
piece of metal so placed as to enable the full section of weld metal to be maintained up to the end of a t
31 075
permanent backing
backing designed to remain permanently ed to the workpiece after welding (See Figure 50.8.) NOTE It may remain as part of the t or be removed by machining or other means.
31 076
permanent backing ring
permanent backing inside a pipe, consisting of a continuous ring
31 077
temporary backing
backing designed to be removed from the workpiece after welding
31 078
temporary backing ring
temporary backing in the form of a ring
31 080
fusible insert
pre-placed filler material that is fused to aid the formation of a weld made from one side only (see Figure 59)
Figure 59
Weld preparation using a fusible insert
No.
Term
Definition
31 081
welding speed
in fusion welding, length of a single or multirun weld completed in a unit of time
31 082
rate of travel travel speed
time required to complete a unit length of a single run of weld or melt run
31 083
slag
non-metallic substance that results from fusion of an electrode covering, a flux core or a powdered flux and which, after solidification, partly or totally covers the weld metal BSI 2008
.
73
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 084
wire guide wire feed nozzle
part of an electro-slag or electro-gas welding machine that guides the electrode wire to the point of welding and also carries the electric current to the wire
31 085
inter temperature
In a multi-run weld, temperature of the weld and adjacent parent metal immediately prior to the application of the next run
31 086
stringer bead
bead that is produced with no weaving motion of the filler rod or welding tool
31 087
tube
metal tube in a metal-arc or electro-slag welding head for ing welding current to, and for guiding, a wire electrode
31 088
aluminothermic welding
flow welding whereby the welding heat is obtained from reacting a mixture of metal oxides with finely ground aluminium powder whose ignition produces an exothermic reaction in which the molten metal produced is the filler metal
31 090
electroslag welding
fusion welding using the combined effects of current and electrical resistance in a consumable electrode, or electrodes, and a conducting bath of molten slag through which the electrode es into the molten pool, both the pool and the slag bath being retained in the t by cooled shoes which move progressively upwards (accompanied by a figure) NOTE After the initial arcing period the end of the electrode is covered by the rising slag and then melts continuously until the t is completed. Electrodes may be bare or flux cored strip(s) or plate(s).
31 091
gas backing
protection of the root from the opposite side of the weld surface by using gas to prevent oxidation and to reduce the risk of a molten pool collapse
31 092
gas flow rate
rate of flow of shielding gas through a torch at normal temperature and pressure
31 093
trailing gas shield
additional supply of shielding gas protecting the weld and the weld area during cooling
31 094
baking oven
heated receptacle in which welding consumables are dried/ baked
31 095
drying oven
See baking oven (31 094).
31 096
quiver
portable, heated or non-heated, receptacle for holding or drying of covered electrodes
31 097
tack sequence
order in which tack welds are placed
31 098
dilution
alteration of composition of the metal deposited from a filler wire or electrode due to mixing with the melted parent material, usually expressed as the percentage of melted parent metal in the weld metal
31 100
welding procedure requirements
all the specified requirements in a welding procedure specification
31 102
weld surface with bead ripples
regular undulations of the weld surface (see Figure 60)
31 103
74
.
back or front
BSI 2008
NOTE Illustration from BS EN ISO 17659.
piece of metal or other auxiliary material placed against the workpiece on either the back or front face of the t in order to retain the molten weld metal
BRITISH STANDARD
Figure 60
BS 499-1:2009
Typical example of butt weld – General view of butt weld
1 7
9
8 2 4
5 6 3 10 Key 1 Weld width 2 Excess weld metal 3 Penetration bead thickness 4 Maximum throat thickness 5 Design throat thickness
6 7 8 9 10
Actual throat thickness Weld toe angle Weld length Weld surface with bead ripples Root width
BSI 2008
.
75
BS 499-1:2009
Figure 61
BRITISH STANDARD
Preparation for double-bevel T-butt welds
10 8
4 7 1 5
2
11 6
9 3 Key 1 Longitudinal edge of preparation 2 Root gap 3 Depth of root face 4 Longitudinal edge of root face 5 Side edge of root face 6 Side edge of preparation
7 8 9 10 11
t width Angle of bevel Depth of preparation Included angle Fusion face (prepared)
No.
Term
Definition
31 105
capping run
final run deposited on the top surface of a fusion weld
31 106
depth of preparation
distance between the workpiece surface and the root face, measured normal to the former (see Figure 61, item 9) NOTE Illustration from BS EN ISO 17659.
31 107
depth of raised edge
distance between the fusion face and the near side of the workpiece in a raised-edge butt t (see Figure 6, item 5) NOTE Illustration from BS EN ISO 17659.
31 108
depth of root face
width of root face, measured normal to the workpiece surface (see Figure 7, item 3, Figure 10, item 3, and Figure 61, item 3) NOTE Illustration from BS EN ISO 17659.
31 109
76
.
filling run(s)
BSI 2008
in multi-layer welding, run(s) deposited after the root run(s) and before the capping run(s)
BRITISH STANDARD
Figure 62
BS 499-1:2009
Typical example of multi-run fusion weld – Double V-butt weld
1 4 3
2 5
3 4
Key 1 Toe 2 Root run 3 Layers of filling runs
Figure 63
4 5
Layer of capping runs First run on second side
Preparation for fillet weld (T-t)
1
3
5 4 2 1 Key 1 Plate thickness 2 Root gap 3 t length
4 5
Included angle Fusion face (fillet weld)
BSI 2008
.
77
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 111
fusion face (fillet weld)
face of workpiece to be fused by a fillet weld (see Figure 61, item 11 and Figure 63, item 5) NOTE Illustration from BS EN ISO 17659.
31 112
fusion face (prepared)
fusion face of a weld preparation that has been prepared by cutting, grinding or machining (see Figure 7, item 8, Figure 10, item 11, Figure 61, item 11, and Figure 65, item 7) NOTE Illustrations are from BS EN ISO 17659.
31 113
fusion face (unprepared)
fusion face that does not require preparation (see Figure 5, item 8, Figure 6, item 7, and Figure 7, item 7) NOTE Illustrations are from BS EN ISO 17659.
31 114
fusion penetration
1) In fusion welding. depth to which the parent metal has been fused (See Figure 4.) 2) In spot, seam or projection welding. distance from the interface to the edge of the weld nugget, measured in each case on a cross section through the centre of the weld and normal to the surface (see Figure 17)
31 117
layer of capping runs
weld metal, deposited on the final surfaces of the t [see Figure 62, item 4, Figure 64a), item 5, Figure 64b), item 5, and Figure 64c), item 5] NOTE Illustrations are from BS EN ISO 17659.
31 118
layers of filling runs
weld metal, deposited beneath the capping runs [see Figure 62, item 3, Figure 64a), item 4, Figure 64b), item 4, and Figure 64c), item 4] NOTE Illustrations are from BS EN ISO 17659.
78
.
BSI 2008
BRITISH STANDARD
Figure 64
BS 499-1:2009
Typical examples of multi-run fusion welds 5 4
1 2
2
5
4
1 3
3
a) Single V-butt weld with root face
b) Single bevel T-butt weld
7
8 2 2 8
5 4
3
6
9
c) Single V-butt weld with sealing run Key 1 Penetration bead thickness 2 Toe 3 Root run 4 Layers of filling runs 5 Layer of capping runs
d) Multi-run fillet weld
6 7 8 9
Sealing run Fusion penetration Leg length Root penetration
BSI 2008
.
79
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 119
length of raised edge
length of the raised edge in the direction of the t (see Figure 6, item 2) NOTE Illustration from BS EN ISO 17659.
31 120
longitudinal edge of preparation
junction of the fusion face and the upper workpiece surface (see Figure 61, item 1, and Figure 65, item 3) NOTE Illustrations are from BS EN ISO 17659.
31 121
longitudinal edge of root face
junction of the fusion face and the root face (see Figure 61, item 4) NOTE Illustration from BS EN ISO 17659.
31 122
longitudinal side of raised edge
junction of the upturned upper workpiece surface and the fusion face in a raised-edge bead weld (see Figure 6, item 3) NOTE Illustration from BS EN ISO 17659.
31 123
penetration bead thickness
height of the root bead above the reverse side of the workpiece [see Figure 64a), item 1, Figure 64b), item 1, and Figure 66, item 10] NOTE Illustrations are from BS EN ISO 17659.
31 124
radius of raised edge
radius of curved surface of a raised-edge butt weld (see Figure 6, item 6) NOTE Illustration from BS EN ISO 17659.
Figure 65
Preparation for single U-butt weld
3 2
7
6
1 5
4 8
Key 1 Plate thickness 2 t length 3 Longitudinal edge of preparation 4 Root radius NOTE
80
.
5 6 7 8
For other dimensions see Figure 50.
BSI 2008
Side edge of root face Width of prepation Fusion face (prepared) Root face
BRITISH STANDARD
Figure 66
BS 499-1:2009
Typical example of fusion weld – Single V-butt weld
4 8 2 3
9 1
10 11 Key 1 Parent metal 2 Weld metal 3 Heat-affected zone 4 Weld zone 5 Fusion penetration 6 Fusion line
7 8 9 10 11
7
5
6
Root of weld Weld width Excess weld metal Penetration bead thickness Fusion zone
No.
Term
Definition
31 125
root gap
gap between the root faces NOTE
See also Figures 5, 7, 61, 63 and 65.
31 126
root (of weld)
zone on the side of the first run farthest from the welder (see Figure 4, Figure 66, Figure 67 and also 31 179)
31 127
root penetration
distance of penetration of molten weld into the root zone [see Figure 64d), item 9, and Figure 67, item 10] NOTE Illustrations are from BS EN ISO 17659.
BSI 2008
.
81
BS 499-1:2009
Figure 67
BRITISH STANDARD
Typical example of fusion weld – Fillet weld
5
4
1 11
2
9 1 6 7
3
10 9
Key 1 Parent metal 2 Weld metal 3 Heat-affected zone 4 Weld zone 5 Fusion penetration 6 Extremity of HAZ
7 8 9 10 11
Root of weld Excess weld metal Leg length Root penetration Fusion zone
8 Weld medal Fusion zone Fusion boundary Extremity of HAZ Line between toes
No.
Term
Definition
31 128
root width
width of the root bead (see Figure 60, item 10) NOTE Illustration from BS EN ISO 17659.
31 129
side edge of preparation
junction of the end of the t and the preparation (see Figure 10, item 5, and Figure 61, item 6) NOTE Illustrations are from BS EN ISO 17659.
31 130
side edge of root face
junction of the end of the end of the t and the root face (see Figure 10, item 4, Figure 61, item 5, and Figure 65, item 7) NOTE Illustrations are from BS EN ISO 17659.
31 133
weld toe angle
angle between the upper workpiece surface and the tangent to the metal cap at the tow, in a plane normal to the weld axis (see Figure 60, item 7) NOTE Illustration from BS EN ISO 17659.
31 134
width of preparation
projected distance between the root face and the longitudinal edge of preparation, measured in the plane of the upper workpiece surface, normal to the weld axis (see Figure 10, item 6, and Figure 65, item 8) NOTE Illustrations are from BS EN ISO 17659.
82
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 135
width of prepared face
distance between the root face and the longitudinal edge of the preparation (see Figure 10, item 9) NOTE Illustration from BS EN ISO 17659.
31 136
buttering
overlay welding in a t preparation to provide a suitable transition between the parent material and subsequent welds
31 137
cosmetic run cosmetic
for superficial remelting of the weld in order to enhance appearance
31 138
slope-down
1) controlled gradual decrease of the current in slope control 2) in beam welding, controlled decrease of the beam power at the end of welding
31 139
slope-up
1) controlled gradual increase of the current in slope control 2) in beam welding, controlled increase of the beam power at the beginning of welding
31 140
tacking run tacking
in beam welding, made to hold the parts to be welded in proper alignment until the final welds are made
31 141
tack welding
fixing of workpieces or assemblies to be ed in their proper position by weld spots or short lengths of weld
31 143
slot lap t slot weld
t between two overlapping components made by depositing a fillet weld round the periphery of a hole in one component so as to it to the surface of the other component exposed through the hole (See Figure 50.30.)
31 144
backing weld pool backing
material placed at the reverse side of a t preparation for the purpose of ing molten weld metal; it may also be used to assist formation of the root run
31 145
both-side welding
welding in which the weld is made from both sides of the workpiece
31 146
double-side single-run welding
welding in which the weld is made from both sides of the workpiece in one run, each run consisting of one bead only
31 147
keyhole technique
welding technique in which concentrated heat penetrates through a workpiece, forming a hole (keyhole) at the leading edge of the weld pool NOTE As the heat source progresses, the molten metal fills the keyhole.
31 148
multi-run welding
welding in which the weld is made or layer deposited in more than two runs NOTE It may also be designated according to the number of runs (e.g. three-run welding).
31 149
one-side welding
welding in which the weld is made from one side of the workpiece
31 150
shielding gas
protective gas used to prevent or reduce atmospheric contamination
31 151
simultaneous double side welding
welding in which the weld is made from both sides of the workpiece in one run simultaneously, each run consisting of one bead only
31 152
single-run welding
welding in which the weld is made or layer is deposited in one run NOTE The weld may consist of one or a number of beads.
BSI 2008
.
83
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 154
temporary weld
weld made to attach a piece or pieces to a weldment for temporary use in handling, shipping, or restraining the t during welding
31 155
thermal efficiency
for linear welds, ratio of heat divided by arc energy (see 10 064 and 32 116)
31 156
weave bead
bead that is produced with a weaving motion of the filler rod or welding tool
31 157
weave technique
welding technique where the run is produced by oscillating the torch transverse to the direction of welding (see Figure 68)
Figure 68
Weave technique
3 2
1 Key 1 Weld 2 Torch 3 Workpiece
No.
Term
Definition
31 158
weaving amplitude
half the weaving width
31 159
weaving frequency
number of oscillatory movements of filler rod or welding tool per unit time
31 160
weaving width
transverse extent of weaving
31 161
beam welding
fusion welding processes using a focused beam of high energy radiation
31 162
skip sequence skip welding; wandering sequence
welding sequence in which short lengths of run are spaced in scattered positions in predetermined order eventually to produce a continuous or intermittent weld, the lengths being laid in either longitudinal direction (see Figure 69)
Figure 69
84
.
BSI 2008
Example of skip sequence
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 163
block sequence block welding
welding sequence in which short lengths of the weld are each made by superimposing a number of runs up to the full or partial size of the weld to form a block before proceeding with the next block; these blocks may be adjacent or spaced (see Figure 70)
Figure 70
Examples of block sequences
No.
Term
Definition
31 164
chain intermittent weld
intermittent weld on each side of a t (usually fillet welds in T and lap ts) arranged so that the welds lie opposite to one another along the t
31 165
single-bevel butt weld
butt weld in the preparation for which the edge of one component is bevelled and the fusion face of the other component is at right angles to the surfaces of the first component (see Figure 50.15, Figure 50.16, Figure 50.19, Figure 50.24 and Figure 50.32)
31 166
double-bevel butt weld
butt weld in the preparation for which the edge of one component is double bevelled and the fusion face of the other component is at right angles to the surfaces of the first component (see Figure 50.21, Figure 50.23 and Figure 50.26)
31 167
flat face fillet weld
fillet weld in which the weld face is approximately flat
31 168
mitre fillet weld
flat face fillet weld in which the leg lengths are equal within the agreed tolerance
31 169
convex fillet weld
fillet weld in which the weld face is convex
31 170
concave fillet weld
fillet weld in which the weld face is concave
31 171
fusion spot weld
weld, other than a plug weld or slot lap t, produced by fusion welding at a spot in the workpiece through one or more thicknesses of overlapping parts (see Figure 50.31)
31 172
flush weld
weld in which the weld face follows approximately the contour of the parent material
31 173
tapered member chamfered member: deprecated
member whose thickness is tapered down to suit that of another member
31 174
closed t preparation
preparation in which the components to be ed are substantially in before welding
31 175
open t preparation
preparation in which the components to be ed are separated by a specific gap before welding BSI 2008
.
85
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 176
cruciform t
connection in which two flat plates or two bars are welded to another flat plate at right angles and on the same axis (see Figure 50.26 and Figure 50.27)
31 177
weld face
surface of a fusion weld exposed on the side from which the weld has been made (see Figure 52)
31 178
fusion face
surface of the parent metal to be melted during welding
31 179
root (of preparation)
1) In the preparation of V, U, J and bevel butt welds. zone in the neighbourhood of, and including, the gap 2) In a square butt weld with backing bar or strip. zone between the prepared edges adjacent to a backing bar or strip 3) In parts assembled for fillet welding. zone in the neighbourhood of the actual or projected intersection of the fusion faces (see Figure 71 and also term 31 126)
Figure 71
Roots of typical weld preparations
No.
Term
Definition
31 180
leg
width of a fusion face in a fillet weld
31 181
effective length
length of continuous weld of specified dimension
31 182
penetration bead
weld metal protruding through the root of a fusion weld made from one side only (see Figure 72)
Figure 72
86
.
Penetration bead
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 183
penetration run penetration
first run or of a multi-run weld whose penetration bead can be seen
31 184
molten pool weld pool
pool of liquid metal formed during fusion welding NOTE In electroslag welding the term includes the slag bath.
31 185
weaving
transverse oscillation of an electrode or of a blowpipe nozzle during the deposition of weld metal
31 186
chipping hammer
hand hammer designed for the removal of slag from weld deposits
31 187
transfer efficiency
degree to which allowing elements in a filler metal or electrode are transferred to the weld metal, usually expressed as the ratio of the percentage of the element in an undiluted weld metal pad to the percentage originally present in the filler wire or electrode NOTE Loss of alloying elements in this case is due to volatilization, oxidation or reaction with the flux and not that due to dilution.
31 188
shoe
part of an electro-slag or electro-gas welding machine that serves to retain the pool of molten metal and slag in the t
31 189
cross bar gap bar; slitter bar: deprecated
member in an electro-slag or electro-gas welding machine that es through the gap above the weld pool in order to the far-side shoe
31 190
end tapering
operation in which the end(s) of a run is gradually tapered to ensure that subsequent runs can be effected without incurring any lack of root or inter fusion
31 191
stringer bead
weld bead deposited without weaving motion of the electrode or filler material
31 192
maximum throat thickness: deprecated
dimension measured from the deepest point of the penetration in fillet welds or the extremity of the root run in butt welds to the highest point of the excess weld metal (see Figure 60, item 4) NOTE This is usually measured from a cross-section, but is not normally used in design or the specification of quality.
Subsection 32. relating only to arc welding No.
Term
Definition
32 001
arc welding
fusion welding in which heat for welding is obtained from an electric arc or arcs
32 002
metal-arc welding
arc welding using a consumable electrode
32 003
manual metal-arc welding MMA welding
manually operated metal-arc welding using a covered electrode
32 004
carbon-arc welding
arc welding using a carbon electrode or electrodes
32 005
metal active-gas welding MAG welding
gas-shielded metal-arc welding in which the shielding is provided by a chemically active gas
32 006
metal inert-gas welding MIG welding
gas-shielded metal-arc welding in which the shielding is provided by an inert gas, e. g. argon or helium
32 007
tungsten inert-gas welding TIG welding
gas-shielded arc welding using a non-consumable pure or activated tungsten electrode where the shielding is provided by a shroud of inert gas BSI 2008
.
87
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 008
submerged-arc welding SA welding
metal-arc welding in which one or more wire electrode(s) [or tubular-cored electrodes], or strip electrode(s) are used, the arc(s) being completely enveloped by molten slag which fuses from the granular flux that is deposited loosely
32 010
electro-gas welding
arc welding using a gas-shielded consumable electrode to deposit metal into a molten pool, retained in the t by cooled shoes which move progressively upwards as the t is made
32 011
arc spot welding
arc welding in which overlapping parts are ed by fusing through one component into the other and so producing a fusion weld at the faying surfaces
32 012
metal-arc spot welding
manual arc spot welding using a covered electrode
32 013
MIG spot welding inert-gas consumable electrode spot welding
arc spot welding using a bare consumable electrode with the arc and molten pool shielded by gas that is wholly or mostly inert
32 014
TIG spot welding inert-gas tungsten-arc spot welding
arc spot welding using a tungsten electrode with the arc and molten pool shielded by gas that is wholly or mostly inert
32 015
arc stud welding
arc welding process that uses an arc between a metal stud, or similar part, and the workpiece
32 016
electrode arc welding electrode
rod, tube or wire of metal or a rod of carbon between one end of which and either the work or another electrode the arc is formed NOTE This should not be confused with term 22 015.
32 017
non-consumable electrode
electrode that does not provide filler metal
32 018
consumable electrode
filler material that conducts the welding current
32 020
covered electrode
consumable electrode in the form of a rod consisting of a metallic core to which a covering has been applied
32 021
tubular cored electrode
wire electrode in a tubular form
32 022
cored electrode flux cored electrode flux-cored wire: deprecated
consumable electrode having a core of flux or other materials NOTE The term ‘‘flux’’ in this context is used in its ordinary engineering sense. The core is sometimes loosely described as flux, whether or not other materials are present.
32 023
metal cored electrode
metal cored electrode containing metal powder
32 024
rutile electrode
covered electrode in which the covering contains a high proportion of titanium dioxide
32 025
cellulosic electrode
covered electrode in which the covering contains a high proportion of cellulose
32 026
basic electrode low hydrogen electrode: deprecated
covered electrode in which the covering is based on calcium carbonate and fluoride
32 027
hydrogen controlled electrode covered electrode that, when used correctly, produces less than a specific amount of diffusible hydrogen in the deposit
32 028
iron powder electrode
covered electrode in which the covering contains a high proportion of iron powder giving a deposition efficiency of at least 100%
32 030
acid electrode
covered electrode in which the covering contains a high proportion of acid material
88
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 031
electrode touch type electrode
covered electrode with a special covering that enables it to be kept in with the parent material during welding to facilitate control of arc length
32 032
welding head
1) device used in automatic arc welding plants comprising an electrode feed mechanism and means for conveying current to the electrode NOTE It can include electrode straightening gear and can be stationary while the work is in motion or vice versa.
2) in resistance welding, device comprising the force generation and guiding system carrying an electrode holder, platen or electrode wheel head 32 033
arc voltage
voltage between electrodes or between an electrode and the work, measured at a point as near as practicable to the arc
32 034
striking voltage
minimum voltage at which any specific arc may be initiated
32 035
no-load voltage open circuit voltage
voltage, exclusive of any arc striking or arc stabilizing voltage, between the output terminals of a welding power source when the external welding circuit is open and when the rated supply voltage is applied to the input terminals
32 036
arc welding power source arc welding plant
equipment for supplying current and voltage and having the required characteristics suitable for arc welding and allied processes
32 037
constant-voltage welding power source
1) arc welding power source whose terminal voltage remains substantially constant between full load and no load 2) arc welding power source with a flat characteristic
32 038
drooping characteristic welding power source
arc welding power source with a drooping characteristic
32 040
welding converter
arc welding power source consisting of an electric motor and a d.c. welding generator
32 041
welding rectifier
arc welding power source consisting of a static converter for supplying direct current for welding from an a.c. supply
32 042
inverter welding power source
power source that converts d.c. to a.c., which is rectified to d.c. by a low-weight transformer
32 043
arcing time
time during which the welding arc is maintained
32 044
main arc power arc: deprecated
arc that supplies welding heat for arc welding
32 045
pilot arc
low-intensity arc to facilitate the striking of the main arc
32 046
gas shield
layer of gas surrounding the weld zone to facilitate the making of a weld
32 047
torch
device that conveys all services necessary to the arc for welding, cutting or allied processes (for example current, gas, coolant, wire electrode)
32 048
welding gun
torch with a handle substantially perpendicular to the torch body
32 050
plasma torch plasma gun: deprecated
arc welding torch using a non consumable electrode and having a gas nozzle producing a constricted plasma arc
32 051
torch angle
angle between the electrode axis and the longitudinal axis of the unwelded part of the t BSI 2008
.
89
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 052
electrode extension
distance between end of tube and end of wire electrode
32 053
metal transfer
transfer of metal across the arc from a consumable electrode to the molten pool
32 054
globular transfer
metal transfer which takes place as globules of diameter substantially larger than that of the consumable electrode from which they are transferred
32 055
spray transfer droplet transfer
metal transfer which takes place as a rapidly projected stream of droplets of diameter not larger than that of the consumable electrode from which they are transferred
32 056
particle transfer frequency
frequency with which metal globules or droplets are transferred across the arc from the end of a consumable electrode
32 057
dip transfer
method of metal-arc welding in which fused particles of the electrode wire in with the molten pool are detached from the electrode in rapid succession by the short-circuit current which develops every time the wire touches the molten pool
32 058
nominal electrode efficiency
for a covered electrode, ratio of the mass of weld metal deposited under standard conditions to the mass of nominal diameter core wire consumed
32 060
wire feed rate
length of wire consumed per unit time
32 061
stub end
part of an electrode used in manual metal-arc welding that is discarded after deposition of the electrode’s practicable length
32 063
wandering arc
arc that is unstable and does not maintain its directionality
32 064
pulsed MIG welding
MIG welding using a pulsed current
32 065
pulsed TIG welding
welding process in which a low background current maintains an arc with minimum heat input and a higher pulsed current occurring at a frequency of 1 Hz to 10 Hz; the pulse current melts a series of overlapping spots with very precise control of the heat input
32 066
plasma arc welding arc plasma welding
arc welding in which the heat for welding is produced with a constricted arc between either an electrode and the workpiece (a transferred arc); or between an electrode and the constricting nozzle (a non-transferred arc); plasma being generated by the hot ionized gases issuing from the orifice and supplemented by an auxiliary source of shielding gas
32 067
arc welding transformer
transformer designed to provide electrical energy for one or more welding arcs
32 068
d.c. welding generator
direct-current generator designed for providing electrical energy to one or more welding arcs
32 070
a.c. welding generator
alternating-current generator designed for providing electrical energy to one or more welding arcs
32 071
engine driven power source
arc welding set consisting of a generator and an engine, which are directly coupled, for supplying electrical energy for welding
32 072
static characteristic
relationship between the output current of a welding power source and the voltage across a practically non-inductive load connected to the output terminals
90
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 073
dynamic characteristic
change with time of voltage and current in response to alterations in load, as when initiating a weld
32 074
arc blow
lengthening or deflection of a welding arc caused by an asymmetric distribution of magnetic flux around the arc
32 075
arc length
distance from the tip of the welding electrode to the adjacent surface of the weld pool
32 076
gravity welding with covered metal-arc welding using an electrode ed by a electrode mechanism that allows the electrode to descend and move along the t under gravity
32 077
gas-shielded arc welding
arc welding in which the arc and molten pool are shielded from the atmosphere by an envelope of gas supplied from an external source
32 078
gas-shielded metal-arc welding
metal-arc welding using either a bare wire or cored electrode in which the arc and molten pool are shielded from the atmosphere by an envelope of gas supplied from an external source
32 080
micro-plasma arc welding
plasma arc welding at welding currents generally below 10 A
32 081
strip cladding
surfacing by automatic submerged-arc or gas-shielded arc welding in which the electrode is in the form of a strip
32 082
deposition efficiency metal recovery
ratio of the mass of weld metal deposited under specified conditions10) to the total mass of electrode consumed, exclusive of the stub end, expressed as a percentage
32 083
deposition coefficient
For a given electrode, mass of weld metal deposited under standard conditions per ampere/minute
32 084
effective electrode efficiency
For a covered electrode, ratio of the mass of weld metal deposited under standard conditions to the mass of actual core wire consumed
32 085
overall weld metal recovery
For covered electrodes, ratio of the mass of weld metal deposited under standard conditions to the total mass of the electrode tested
32 087
melting rate burn-off rate
1) In friction welding. rate of shortening of the components during application of the friction force 2) In arc welding. linear rate of consumption of a consumable electrode
32 089
backing gas
gas used for gas backing
32 090
narrow gap welding
fusion welding in which the gap between the workpieces is relatively narrow; it can be carried out by different metal-arc welding processes, e.g. metal-arc active gas welding, electrogas welding, etc.
32 091
plasma MIG welding
combination of MIG welding and plasma arc welding
32 092
powder plasma welding
plasma-arc welding with metallic powder feeding (accompanied by a figure)
32 093
pull technique
welding technique where the torch is pulled in the welding direction (accompanied by a figure in ISO 857-1) NOTE The torch angle is less than or equal to 90º.
10)
These conditions are normally specified by the electrode manufacturer. BSI 2008
.
91
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 094
push technique
welding technique where the torch is pushed in the welding direction (accompanied by a figure in ISO 857-1) NOTE The torch angle is greater than 908.
32 095
self-shielding tubular-cored arc welding Figure 73
metal-arc welding using a tubular-cored electrode without external shielding gas (see Figure 73)
Self-shielded tubular-cored arc welding
6
7
5
4
8
3
2 Key 1 Workpiece 2 Arc 3 Weld 4 Torch
1 5 6 7 8
tip Flux-cored electrode Wire feed rolls Power source
No.
Term
Definition
32 096
open arc welding
arc welding in which the arc is visible
32 097
controlled-arc welding
arc welding in which the electrode is fed to the arc at a rate controlled by the arc voltage to maintain a constant arc length
32 098
self-adjusting arc welding
metal-arc welding in which the electrode is fed at a constant speed while the arc length is maintained substantially constant by the inherent electrical characteristics of the welding current circuit
32 099
touch welding welding
metal-arc welding using a covered electrode, the covering of which is kept in with the parent metal during welding
32 100
parallel welding
arc welding using two electrodes connected in parallel to one power source and feeding the same weld run
32 101
multi-power welding
arc welding using two or more power sources, each connected to a separate electrode, which feed the same weld run
32 102
series arc welding
arc welding using two electrodes connected in series to one power source and which feed the same weld run
92
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 103
firecracker welding
metal-arc welding in which a covered electrode is or electrodes are laid on the parent metal; the arc is started between one end of the electrode and the work and travels along the work as the electrode melts
32 104
CO2 welding
metal-arc welding in which a bare wire electrode is used, the arc and molten pool being shielded with carbon dioxide
32 105
tungsten-arc spot welding
arc spot welding using a tungsten electrode
32 106
CO2 spot welding
arc spot welding using a consumable electrode in which the arc and molten pool are shielded from the atmosphere by carbon dioxide gas
32 107
atomic-hydrogen welding
arc welding in which molecular hydrogen, ing through an arc between two tungsten or other suitable electrodes, is changed to its atomic form and then recombines to supply the heat for welding
32 108
bare wire elecrode
solid wire or rod consumable electrode without covering or core
32 109
sheathed electrode
covered electrode having an external sheath
32 110
iron oxide electrode
covered electrode in which the covering contains a high proportion of iron oxide
32 111
alloy powder electrode
covered electrode in which the covering contains powders which, with the core wire, form an alloy when deposited
32 112
deep penetration electrode
covered electrode in which the covering aids the production of a penetrating arc to give deeper than normal fusion in the root of a t
32 113
hard facing electrode hard surfacing electrode
metal-arc welding electrode which, by virtue of the composition of the core or the covering or both, will deposit metal that is harder than the parent metal or can be hardened
32 114
guide tube
rigid tube that guides a filler wire or electrode but does not convey current
32 115
crater filler
device used in automatic and semi-automatic arc welding, or arc spot welding, that gradually reduces the welding current at the end of a weld run or just before the arc is extinguished, thereby preventing the formation of a crater
32 116
arc energy
in arc welding, amount of heat generated in the welding arc, referenced to a characteristic dimension, which in a linear weld is per unit length of weld (kJ/mm) NOTE Where the thermal efficiency (31 155) is less than unity, this will be greater than the heat input.
32 117
true arc voltage
voltage between the two ends of an electric arc
32 118
restriking voltage
transient voltage that develops between the electrode and the workpiece immediately following arc extinction, causing the arc to restrike
32 119
spark starting HF ignition
ignition of an arc by a high voltage high frequency spark applied across the arc gap
32 120
cyclic reignition voltage
In tungsten inert-gas welding, voltage between the electrode and work required to reignite an a.c. arc at the start of each half cycle
BSI 2008
.
93
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 121
spark reignition HF reignition
reignition of an a.c. arc, after extinction at zero current, by a high voltage high frequency spark applied across the arc gap
32 122
surge reignition
reignition of the arc, after extinction at zero current, by a voltage pulse applied across the arc gap when the electrode is positive, to produce a superimposed restriking voltage (see Figure 74)
Figure 74
Surge reignition
No.
Term
Definition
32 123
surge injector
device for maintaining an a.c. arc by surge reignition
32 124
HF unit HF ionizer: deprecated
high frequency electrical oscillator used to enable an arc to be initiated without between the electrode and the workpiece
32 125
drooping characteristic welding power source
arc welding power source, the terminal voltage of which drops to a value appreciably below the open circuit voltage after the arc has been struck
32 126
rising characteristic welding power source
arc welding power source the terminal voltage of which rises to a value slightly above the open circuit voltage after the arc has been struck
32 127
motor generator welding power source
arc welding power source consisting of a generator and an electric motor which are directly coupled, for supplying direct current for welding
32 128
rectifier welding power source arc welding power source consisting of a static converter for supplying direct current for welding from an a.c. supply
32 129
slope-led welding power source
arc welding power source, the volt-ampere characteristic of which can be selected from substantially flat to drooping to obtain the desired arc condition NOTE This should not be confused with term 22 127.
32 130
94
.
arcing time factor
BSI 2008
ratio of arcing time to the total time the supply is available for the arc
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 131
load current
current flowing for test purposes between the output terminals of an arc welding set (i.e. those to which the electrode and return leads are connected) through a resistance load
32 132
load voltage
voltage between the output terminals of an arc welding set when the load current is flowing
32 133
maximum welding current
maximum current that can be supplied from a single welding point at a specified load voltage
32 134
maximum continuous hand-welding current
maximum current that a single welding point is capable of supplying, without the plant exceeding the specified rise in temperature, when supplying an arc for an operator engaged continuously on manual metal-arc welding
32 135
typical electrode current
current at which an electrode may generally be used satisfactorily in a given position
32 136
electrode current range
range of current within which an electrode can be used satisfactorily
32 137
zero current pause
period of time in a half cycle between arc extinction and reignition during which no current flows
32 138
partial rectification
In tungsten inert-gas welding, loss of current during part of each half cycle when the electrode is positive; the arc, extinguished as in complete rectification, is ignited later in the same half cycle (see Figure 75)
32 139
complete rectification
In tungsten inert-gas welding, complete loss of current during each half cycle when the electrode is positive, due to failure of the arc to reignite (see Figure 75)
32 140
inherent rectification
In tungsten inert-gas welding, asymmetry between the positive and the negative half cycles of current that normally exists even when there is no partial or complete rectification (see Figure 75)
Figure 75
Types of rectification
BSI 2008
.
95
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 141
arc fan
fan-shaped flame associated with the atomic-hydrogen arc
32 142
TIG torch argon-arc torch
combined electrode holder and gas nozzle to convey current to the electrode and gas to shield the arc and weld area
32 143
MIG gun CO2 gun
combined electrode tube and nozzle to convey current to a wire electrode and gas to shield the arc and weld area
32 144
atomic-hydrogen torch
electrode holder carrying the electrodes and incorporating a means of supplying hydrogen to the arc in atomic-hydrogen welding
32 145
hydrogen valve
electrically operated on/off valve used in atomic-hydrogen welding to allow hydrogen to flow only when an arc has been struck
32 146
electrode positive
arc welding using direct current in which the electrode is connected to the positive pole of the supply NOTE This has sometimes been known in British practice as ‘‘straight polarity’’ and in American practice as ‘‘reversed polarity’’. For this reason both these are deprecated.
32 147
electrode negative
arc welding using direct current in which the electrode is connected to the negative pole of the supply NOTE This has sometimes been known in British practice as ‘‘reversed polarity’’ and in American practice as ‘‘straight polarity’’. For this reason both these are deprecated.
32 148
melt
flux used in submerged-arc welding
32 149
fused melt
glass-like material formed from the powdered flux during submerged-arc welding
32 150
burden
layer of melt and fused melt above the welding zone in submerged-arc welding
32 151
electrode efficiency electrode recovery; electrode yield
ratio of mass of all-weld metal deposited in the groove or on the workpiece to the mass of filler metal consumed, or to the core wire consumed in metal-arc welding with covered electrode, expressed as a percentage
32 152
stub-in
freezing of the electrode into the weld
32 153
burn-back
fusing of the electrode wire to the current tube by sudden lengthening of the arc in any form of automatic or semi-automatic metal-arc welding using a bare wire electrode
32 154
spatter loss
proportion of a consumable electrode or electrode core wire that is lost as spatter
32 155
striking plate
piece of material, kept close to the workpiece, on which an arc is struck before the electrode is transferred to the work
32 156
automatic stud welding equipment
stud welding equipment in which the complete sequence of operations is automatically controlled after being initiated
32 157
stud welding tool
appliance for holding, positioning and controlling the movement of the stud during stud welding, and for conveying pressure and current to it during the welding cycle
32 158
spatter shield
device on a stud welding tool to restrict the spread of weld spatter
32 159
stud welding controller
part of a stud welding equipment used to control the sequence of operations in the making of a stud weld
96
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 160
stud welding gun
stud welding tool intended to be held in the hand
32 161
lift
distance by which the stud is retracted from the parent metal in order to initiate the arc in stud welding
32 162
arc damper arc blow compensator
device in a stud welding tool for controlling the arc blow in the welding arc
32 163
granular flux filled stud
stud, hollow at the welding end, containing granular flux held in place by a metal cap
32 164
metallized fluxed stud
stud that is fluxed on the welding end by a metallization process
32 165
slug loaded stud
stud to the welding end of which is attached a solid slug or pellet of flux
32 166
fillet collar
ring of weld metal formed round the base of a welded stud
32 167
ferrule
sleeve or bush of refractory material surrounding the base of a stud during arc stud welding to protect and contain the molten metal and, where required, to shape the weld fillet
32 168
fluxed ferrule
sleeve, bush or cap containing material for fluxing purposes for attachment to the end of a stud
32 169
MIG pulsed-arc welding
metal inert-gas welding in which a background direct current arc is maintained to supply heat to the workpiece and electrode wire and a regular pulsed current of the same polarity (usually electrode positive) and of a higher peak value is applied to control metal transfer
32 170
TIG pulsed-arc welding
tungsten inert-gas welding in which a background direct current is maintained to preserve an ionized path for the arc and a regular pulsed current of the same polarity (usually electrode negative) is applied to control heat input to the workpiece
32 171
self-regulating arc-welding transformer
arc-welding transformer in which the voltage drop increases substantially with the secondary load current
32 172
self-regulating d.c. welding generator
d.c. welding generator in which the voltage drop increases substantially with the load current
32 173
braided electrode
covered electrode with the covering reinforced by a process of braiding
32 174
dipped electrode
covered electrode produced by single or multiple dipping of the core wire into a paste of flux
32 175
extruded electrode
covered electrode produced by extruding the flux on to the core wire
32 177
dense slag solid slag
slag of limited porosity that may exert mechanical pressure to produce a smooth weld face
32 178
porous slag
slag that has a honeycomb structure
32 179
friable slag
slag that crumbles easily to aid removal
32 180
fluid slag
slag with slow freezing properties that flows freely during deposition of an electrode
32 181
viscous slag
slag with quick freezing properties that does not flow freely during deposition of an electrode
BSI 2008
.
97
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 182
non-shielded welding
metal-arc welding using a cored electrode in which materials for controlling the quality of the weld metal are contained in the wire or core without the use of an external shielding
32 183
stick electrode
straight covered electrode for metal-arc welding having one end bare for insertion in an electrode holder
32 184
continuous covered electrode covered electrode supplied in coils for automatic welding, having a core wire surrounded by two or more helically wound wires which reinforce the covering and conduct current to the core wire
32 185
synergic pulsed MIG welding form of pulsed MIG welding using electronic control logic to determine the value of the pulse parameters and pulse frequency, according to the selected value of wire feed speed
32 186
A-TIG
TIG welding using an activating flux
32 187
tandem arc welding
arc welding using two power sources, each connected to one electrode wire and fed simultaneously into the same weld pod
32 188
twin wire welding
arc welding using two filler wires connected to one power source and delivered through a single tube
Subsection 33. relating only to gas welding No.
Term
Definition
33 001
gas welding
fusion welding, with or without filler metal, in which the heat for welding is produced by the combustion of a fuel gas or gases with an ixture of oxygen
33 002
oxy-acetylene welding
gas welding in which the fuel gas is acetylene NOTE Other fuel gases are also used with oxygen (i.e. butane, hydrogen and propane); in such cases appropriate alterations to the term and the definition are necessary.
33 003
neutral flame11)
33 004
reducing flame
33 005
carburizing flame
33 006
oxidizing flame
flame in which the first stage of combustion is complete, with no excess of oxygen in the cone visible at the nozzle orifice (see Figure 76) flame in which the portion used has a de-oxidizing effect 11)
Figure 76
11)
98
flame in which there is an excess of a carbonaceous fuel gas, resulting in a carbon-rich zone extending around and beyond the cone (see Figure 77 and Figure 78) flame in which there is an excess of oxygen, resulting in an oxygen-rich zone just beyond the cone (see Figure 79) Neutral oxy-acetylene flame
Neutral and carburizing flames are reducing in nature. .
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Figure 77
Carburizing oxy-acetylene flame
Figure 78
Carburizing oxy-acetylene flame for a hard surfacing application
Figure 79
Oxidizing oxy-acetylene flame
No.
Term
Definition
33 007
leftward welding forward welding
gas welding technique where the filler rod is moved ahead of the blowpipe in relation to the welding direction (see Figure 80)
33 008
rightward welding backward welding
gas welding technique where the filler rod is moved behind the blowpipe in relation to the welding direction (see Figure 81)
Figure 80
Leftward welding
Figure 81
Rightward welding
BSI 2008
.
99
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
33 010
welding blowpipe
welding torch in which a fuel gas is mixed with oxygen to produce a flame that can be controlled to be oxidizing, neutral or reducing
33 014
automatic quick-acting shut-off device
self-acting device which closes quickly e.g. when triggered by an acetylene explosion in the high pressure manifold pipework
33 015
backfire
retrogression of the flame into the blowpipe neck or body with rapid self-extinction
33 016
backflow
flowing back of the gas at the higher pressure into the hose of the gas at the lower pressure; this can be caused by the nozzle exit becoming blocked or restricted
33 017
blowing off the flame
detachment of the flame from the blowpipe nozzle; this may cause the flame to be extinguished
33 018
blowpipe with a single flow rate
blowpipe, which due to design gives a single nominal gas flow rate that can only be varied within narrow limits
33 019
blowpipe with multiple flow blowpipe giving a range of flow rates corresponding to a rates series of nozzles
33 020
blowpipe with nozzle mixing blowpipe with a nozzle that contains a mixer or an injector-mixer
33 021
blowpipe with preliminary mixer
cutting blowpipe in which the mixture of heating oxygen and fuel gas is ensured by the injectormixer located before the cutting nozzle
33 022
burst pressure
pressure which causes failure of, and consequential fluid loss through the component envelope
33 024
cylinder bundles
cylinder arrangements which are connected together for collective filling and emptying
33 025
excess flow cut-off valve
device which stops the gas flow in the event of flow exceeding a predetermined value
33 029
high pressure blowpipe
blowpipe in which the pressure of both the fuel gas and the oxygen/compressed air, measured immediately before the point of mixing, is higher than the pressure of the gas mixture, measured between the point of mixing and welding nozzle
33 031
hose assembly
assembly consisting of a hose tail inserted into the end of a hose and secured by a suitable hose clamp NOTE A typical hose assembly consists of: hose tail, hose, hose clamp.
33 032
hose clamp
device for fastening the hose on the hose tail
33 034
hose tail
end of a coupling device to be inserted into a hose
33 035
injector-mixer
device in which gas leaving an injector entrains and mixes with another gas which is at a lower pressure
33 036
low pressure blowpipe
blowpipe in which the fuel gas pressure, measured immediately before the mixing chamber, is lower than the pressure of the gas mixture, measured between the mixing chamber and welding nozzle
33 042
manual quick acting shut-off manually activated device to quickly stop the gas flow valve
100
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
33 044
mixer without injector action mixing systems in which the fuel gas and the oxidizing gas are discharged; the pressure in this channel is higher than the atmospheric pressure
33 046
multifunctional safety device device which incorporates two or more of the safety functions
33 048
non-return valve
valve that prevents the age of gas in the opposite direction to the normal flow
33 050
pressure-sensitive cut-off valve
device which stops the gas flow in the event of a back-pressure wave from the downstream side
33 051
pressure relief valve
device which automatically vents gas when the pressure exceeds some predetermined value and seals again when the pressure returns to within specified limits of that value
33 052
proof pressure
maximum pressure to which the equipment might be subjected in service
33 054
quick-action coupling with shut-off valve
device enabling a rapid coupling or uncoupling under pressure of two elements and/or hoses, which automatically releases the gas flow during connection and prevents the escape of gas when disconnected
33 060
sustained backfire
retrogression of the flame into the blowpipe neck or body, the flame remaining alight NOTE This manifests itself either as ‘‘popping’’ or ‘‘squealing’’ with a small pointed flame issuing from the nozzle orifice, or as a rapid series of minor explosions inside an overheated nozzle.
33 061
temperature sensitive cut-off device which stops the gas flow when a predetermined device temperature is exceeded
33 062
assembled hose
length of hose fitted at each end with a hose assembly
33 063
blowpipe with a fixed mixer
blowpipe with multiple flow rates which are varied by adjusting the feed pressures
33 065
blowpipe with a variable injector
blowpipe with multiple flow rates which are varied by means of a device for adjustment of the injector cross-section
33 066
blowpipe with an interchangeable injector
blowpipe with multiple gas flow rates which are varied by changing the injector; the latter often forms a single component with the outlet nozzle
33 067
blowpipe with multiple flow blowpipe with multiple flow which is varied by means of the rates adjusted by means of adjustment valves gas control valves
33 068
closing pressure
stablilized outlet pressure (stabilization after flow ceases) one minute after stopping the standard discharge
33 069
discharge of the relief valve
minimum discharge (rate of unit volume) of the relief valve
33 070
external gas leakage
undesired escape of gas from a product to the atmosphere
33 071
internal gas leakage
undesired escape of gas between chambers with different pressures inside a product
33 072
manifold systems
systems in which two or more single cylinders or bundles are coupled on the high pressure side for collective gas withdrawal
33 073
maximum operating pressure maximum pressure to which the equipment might be subjected in service
BSI 2008
.
101
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
33 074
maximum permissible external leakage rates
total leakage rates for a complete product including inlet connection
33 076
nominal outlet pressure
downstream pressure corresponding to a defined flow (standard discharge defined either by its class of equipment or in the technical leaflets)
33 077
nominal inlet pressure
inlet pressure defined by the manufacturer and for which the equipment is intended to work
33 078
routine manufacturing test
revealing test where all manufactured products are checked by the manufacturer in order to and maintain the product quality level
33 079
safety device
device for welding equipment which averts risk in case of misuse or malfunction of the downstream gas welding equipment
33 080
spontaneous ignition temperature
in the absence of any energy source, temperature at which spontaneous ignition of a sample occurs in oxygen
33 081
standard discharge
discharge (rate of unit volume) specified by the relevant standard or by the manufacturer under specified conditions
33 082
type test
tests of an equipment to prove conformance to the specific standard
33 083
upstream pressure for type testing
pressure equal to twice the nominal outlet pressure plus 1 bar
33 084
all-position rightward welding
welding technique in which the flame and filler rod are directed towards the unwelded part of the t, the welding rod being directed in between the flame and the weld (see Figure 82)
33 085
surface fusion welding semi-fusion welding: deprecated
gas welding in which a carburizing flame is used to melt the surface of the parent metal, which then unites with molten metal from a suitable filler rod NOTE This application is used for hard facing, building-up and the like.
Figure 82
102
.
All-position rightward welding
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Subsection 34. relating only to electron beam welding No.
Term
Definition
34 001
electron beam welding EB welding
fusion welding in which the heat for welding is generated by the impact of a focused beam of electrons
34 002
electron gun
device for producing electrons and the means by which they are accelerated and focused on to the workpiece
34 003
low voltage electron gun
electron gun with an accelerating voltage up to and including 40 kV
34 004
medium voltage electron gun electron gun with an accelerating voltage greater than 40 kV up to and including 60 kV
34 005
high voltage electron gun
electron gun with an accelerating voltage greater than 60 kV
34 006
beam current
current flowing between the cathode and the anode of an electron gun, expressed in milliamperes
34 007
beam power
product of accelerating voltage and beam current, expressed in kilowatts
34 008
beam power density specific beam power
value expressed in kilowatts per unit area, obtained by dividing the beam power by the cross-sectional area of the electron beam at a specified position
34 009
working distance
distance between a reference point, usually the lower member of the electron gun, and the point at which the beam impinges on the workpiece
34 010
beam pulsing
production of a non-continuous electron beam
34 011
accelerating voltage
voltage between the cathode and the anode that accelerates the electrons
34 012
beam current pulsing
in electron beam welding, intentional periodic variation of the beam current
34 013
beam deflection
in electron beam welding, electromagnetic deflection of the beam from the gun axis
34 014
beam oscillation
in electron beam welding, intentional periodic deflection of the beam, achieved by electromagnetic forces
34 015
spot position
in electron beam welding, position of the electron beam when it impinges on the workpiece surface with respect to a system of co-ordinates perpendicular to the axis of the beam
34 016
electron beam welding machine
apparatus for providing and controlling the energy and including if necessary the associated work manipulating system for making an electron beam weld
34 017
directly heated gun
electron gun in which the cathode is heated directly by the filament current (see Figure 83 and Figure 84)
34 018
diode gun
electron gun, directly heated, with two electrodes wherein the beam current is adjusted by varying the cathode temperature, accelerating voltage or electrode spacing or any combination of these variables (see Figure 83)
34 019
triode gun
electrode gun, directly heated, with three electrodes wherein the beam current is usually controlled by a grid electrode but is dependent on the cathode temperature, the accelerating voltage and perveance (see Figure 84)
BSI 2008
.
103
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
34 020
back-bombarded gun
electron gun in which the cathode is heated by bombardment with electrons from a separated primary gun (see Figure 85)
104
.
BSI 2008
Figure 83
Diagrammatic representation of a diode gun
Figure 84
Diagrammatic representation of a triode gun
BRITISH STANDARD
BS 499-1:2009
Figure 85
Diagrammatic representation of a back-bombarded gun
No.
Term
Definition
34 021
cathode filament
source from which electrons are emitted
34 022
filament current heater current
current that heats the cathode to a temperature to produce the required electron emission
34 023
grid electrode bias electrode
electrode that controls the magnitude of the beam current and which is negative in respect to the cathode of the electron gun
34 024
cathode shield field electrode
electrode that surrounds the cathode and is at the same potential
34 025
perveance
geometric characteristic, G, of an electron gun that relates the current and accelerating voltage according to the formula:
where: I is the beam current (in amperes); V is the accelerating voltage (in volts) 34 026
bias voltage
voltage applied between the cathode and the grid electrode to control the magnitude of beam current independently of accelerating voltage and perveance changes
34 027
beam current control
means of adjusting the beam current by controlling the bias voltage or the cathode temperatures or by changing the perveance value
34 028
beam deflector deflection coils
electromagnetic means of deflecting the electron beam
BSI 2008
.
105
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
34 029
focusing lens
magnetic coils or electrostatic devices which provide the field for focusing the electron beam
34 030
focus control
device to control the magnitude of the current or voltage in the focusing lens
34 031
optical viewing system
means for viewing the point of beam impingement by looking down the path of the electron beam
34 032
full vacuum system hard vacuum system
electron beam welding machine, the work chamber and electron gun of which operate at a vacuum of better than 5 6 10–4 mbar (5 6 10–2 Pa)
34 033
partial vacuum system soft vacuum system
electron beam welding machine with a separately pumped electron gun, the work chamber of which operates at a vacuum in the range 5 6 10–3 mbar to 5 6 10–1 mbar (5 6 10–1 Pa to 50 Pa)
34 034
out of vacuum system non-vacuum system
electron beam welding machine with a separately pumped electron gun in which the electron beam is transmitted via a specially designed orifice to the workpiece in an environment at atmospheric pressure
34 035
separately pumped electron gun
electron gun pumped to a vacuum better than 1 6 10–4 mbar (1 6 10–2 Pa) irrespective of the pressure surrounding the workpiece
34 036
beam spinning
use of magnetic deflection of the beam to cause it to describe a circular path in order to redistribute the energy profile, usually the frequency of rotation being in the range 50 Hz to 5 000 Hz
34 037
focusing lens current
In electron beam welding, current ing through the focusing lens coil
Subsection 35. relating only to light radiation welding No.
Term
Definition
35 001
light radiation welding
fusion welding in which the heat for fusion is produced by an optically focused beam of radiation, welding being carried out in a vacuum or under the protection of a shielding gas or under normal atmospheric conditions, generally without the addition of a filler metal
35 002
laser welding
fusion welding in which the heat for fusion is produced by a coherent beam of monochromatic radiation from a laser
35 003
laser
equipment for producing a coherent beam of monochromatic radiation NOTE The word laser is derived from Light Amplification by Stimulated Emission of Radiation.
35 004
solid state laser
laser in which the beam is generated by a solid medium, e.g. yttrium aluminium garnet
35 005
gas laser
laser in which the beam is generated by an activated gas, e.g. CO2
35 006
focal length
distance between the optical centre of the focusing lens and the position of the focal spot
106
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
35 007
focal spot
part of the beam beyond the lens system where the beam comes to a minimum cross-sectional area
35 009
arc image welding
light radiation welding in which the heat for fusion is produced by a non-coherent beam of radiation of a particular frequency band, the source of light being an arc
Subsection 36. relating only to aluminothermic welding No.
Term
Definition
36 001
aluminothermic welding thermit welding
flow welding whereby the welding heat is obtained from reacting a mixture of metal oxides with finely ground aluminium powder whose ignition produces an exothermic reaction in which the molten metal produced is the filler material
36 002
thermit mixture
mixture of metallic oxides and finely divided aluminium, whose ignition produces an exothermic reaction, reducing the mixture to molten metal and slag accompanied by intense heat NOTE The composition of the thermit mixture is varied to suit the type of steel or cast iron to be welded.
36 003
ignition powder
readily ignitable mixture, usually of powdered aluminium and oxidizing material, used for initiating the reaction in aluminothermic welding
36 004
igniter
device used in place of ignition powder
36 005
thermit crucible
vessel in which the thermit reaction takes place, with a hole in the bottom through which the molten metal es (see Figure 86)
36 006
stone
ring of refractory material, usually pressed magnesite, built into the bottom of a thermit crucible for the reception of a thimble (see Figure 86)
36 007
thimble
renewable ring of refractory material, usually magnesite, inserted in a stone to act as a nozzle when the crucible is tapped (see Figure 86)
36 008
tapping pin
metal plug closing the hole in a thimble (see Figure 86)
36 009
plugging material
refractory material placed on top of a tapping pin to prevent the pin from melting (see Figure 86)
36 010
wax pattern
pattern formed of wax that is moulded around the parts to be welded, and which becomes the foundation of a mould and is then melted out prior to preheating
36 011
mould
receptable that may be either formed round the parts to be welded or preformed and placed round them to receive the molten metal from the crucible (see Figure 86) NOTE The mould material is usually a mixture of natural or synthetic high-silica sand and plastic clay.
36 012
preheating gate
opening in a mould to facilitate preheating of parts to be ed by aluminothermic welding (see Figure 86)
36 013
pouring gate
opening in a mould into which the molten metal is poured from the crucible (see Figure 86) BSI 2008
.
107
BS 499-1:2009
BRITISH STANDARD
Figure 86
Basic equipment for aluminothermic welding
No.
Term
Definition
36 014
riser
reservoir of molten metal above the highest point of an aluminothermic weld to compensate for shrinkage and to collect scale and other impurities arising during welding (see Figure 86)
36 015
slag basin
depression in the top of a mould to contain a portion of the slag (see Figure 86)
36 016
slag pot
vessel to receive slag overflowing from the slag basin (see Figure 86)
36 017
slag shute
channel to conduct slag from the slag basin into the slag pot (see Figure 86)
36 018
collar
weld metal projecting around the periphery of a weld made by aluminothermic welding (see Figure 86)
108
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Subsection 37. relating only to electro-slag welding No.
Term
Definition
37 001
electro-slag welding
fusion welding utilizing the combined effects of current and electrical resistance in a consumable electrode(s) and a conducting bath of molten slag, through which the electrode(s) es into a molten pool, both the pool and slag bath being retained in the t by cooled shoes which move progressively upwards; after an initial arcing period, the end of the electrode is covered by the rising slag, and melting then continues until the t is completed (see Figure 87)
37 002
consumable wire guide consumable nozzle
wire guide, which may be coated or uncoated, made of material similar in composition to that being welded and progressively consumed to form part of the weld metal
Figure 87
Electro-slag welding
Key 1 Plates to be welded 2 Shoes 3 Molten slag 4 Electrode 5 Molten metal 6 Finished weld
No.
Term
Definition
37 003
cooled shoe
metal shoe, having ages for the cooling medium, that s the molten pool and which is moved upwards as welding progresses
37 004
starting block
piece of metal that is placed at the bottom of the t preparation and used to strike the starting arc and which s the initial molten pool
37 005
electro-slag welding flux
flux that, when molten, forms a slag pool of controlled electrical conductivity which melts the filler metal ing through and protects the molten weld pool BSI 2008
.
109
BS 499-1:2009
BRITISH STANDARD
Section 4. relating to braze welding and brazing Subsection 40. relating only to braze welding No.
Term
Definition
40 001
braze welding
ing of metals using a technique similar to fusion welding and a filler metal with a lower melting point than the parent metal, but neither using capillary action as in brazing nor intentionally melting the parent metal
40 002
bronze welding
form of braze welding in which copper-rich filler metal is used NOTE The term ‘‘bronze’’ is not used here in the ordinary metallurgical sense.
40 003
gas fluxing
method of supplying a flux in gas form to the t during braze welding NOTE The flux, originally liquid, is generally entrained by the fuel gas from a dispenser and es through the flame to the t.
40 004
bronze filler metal bronze welding rod
filler metal used for bronze welding, consisting basically of copper and zinc, but can also contain nickel, manganese or other metals NOTE The term ‘‘bronze’’ is not used here in the ordinary metallurgical sense.
40 005
bell butt t
t between two pipes of similar diameter, in which one pipe end is swaged out to receive the end of the other pipe (see Figure 88)
40 006
diminishing bell butt t
t between two pipes of different diameters, in which the end of the smaller pipe is swaged out to fit the bore of the larger pipe (see Figure 89)
Figure 88
Bell butt t
Figure 89
Diminishing bell butt t
No.
Term
Definition
40 007
branch T saddle t
t between a branch pipe and a main pipe set at 90º to each other, the end of the branch pipe being shaped to fit snugly against the main pipe
110
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
40 008
short bell branch t
branch t in which the metal round a hole in a main pipe is swaged out to receive the swaged end of a branch pipe (see Figure 90)
40 009
air-acetylene blowpipe: bunsen type
blowpipe incorporating an open injector-mixer in the blowpipe shank
40 010
air-acetylene blowpipe: high temperature type
blowpipe incorporating an open injector-mixer in the nozzle
40 011
bond weld
weld made between a stranded flexible copper conductor and a steel rail to ensure electrical conductivity NOTE Bonds are installed at rail ts, a weld being made at one end of the bond to one rail and at the other end of the bond to the other rail.
Figure 90
Short bell branch t
Subsection 41. relating only to brazing No.
Term
Definition
41 001
brazing
process of ing generally applied to metals in which, during or after heating, molten filler metal is drawn into or retained in the space between closely adjacent surfaces of the parts to be ed by capillary attraction NOTE In general the melting point of the filler metal is above 450 ºC, but always below the melting temperature of the parent material.
41 002
resistance brazing
brazing in which the filler metal is usually preplaced and heat is produced by: a) the age of an electric current between the parts to be ed, as in resistance welding; or b) the age of an electric current, generally through carbon electrodes in with the parts to be ed NOTE Most of the heat required for brazing is generated externally within the electrode material and is transmitted to the t by thermal conduction. BSI 2008
.
111
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
41 003
dip brazing
brazing in which a workpiece is partly or totally immersed in a bath of molten brazing alloy which is covered by a layer of molten flux
41 004
flame brazing torch brazing: deprecated
brazing in which heat is obtained from a gas flame from a blowpipe
41 005
furnace brazing
brazing in which the workpiece complete with preplaced filler metal is raised to brazing temperature in a furnace which may contain a protective atmosphere
41 006
induction brazing
brazing in which heat is obtained by inducing high-frequency electric current within the material in the neighbourhood of the t NOTE A protective atmosphere may be used.
41 007
salt bath brazing
brazing in which heat is obtained by immersing the workpiece complete with preplaced filler metal in a bath of molten salt of suitable melting point NOTE The salt used can act as a flux.
41 008
flux-dip brazing
salt bath brazing in which the salt is a flux
41 009
brazing alloy
filler metal used in brazing
41 010
spelter
brazing alloy consisting nominally of 50% copper and 50% zinc NOTE The term ‘‘spelter’’ is not used here in the ordinary metallurgical sense.
41 011
stopping-off agent
inert paint-like compound, usually based on a refractory oxide, applied adjacent to the t to control the undesirable spread of molten brazing alloy and prevent it from adhering to adjacent surfaces
41 012
vacuum brazing
brazing in which the workpiece, complete with preplaced filler metal, is raised to brazing temperature in a vacuum
41 013
braze metal
all the metal taken into the molten state, i.e. filler metal plus dissolved parent metal, during brazing
41 014
post-braze diffusion treatment
heat treatment where diffusion, additional to that inherent in the normal brazing process, is made to take place between the braze metal and the parts to be ed, either to improve the strength of the t or to raise the remelt temperature of the t NOTE This can be carried out either as an extension of the brazing cycle or as a separate treatment.
41 015
112
.
controlled atmosphere brazing
BSI 2008
brazing in which the workpiece, complete with preplaced filler metal, is raised to brazing temperature in a chamber containing a controlled mixture of gases
BRITISH STANDARD
BS 499-1:2009
Section 5. relating to testing NOTE In relating to testing ‘‘test piece’’ and ‘‘test specimen’’ may be used interchangeably, the choice being made according to the custom prevailing in the particular area of industry involved.
50 001
test piece; test specimen test coupon: deprecated
portion detached from a welded component or a welded t and prepared as required for testing
50 002
test specimen
part or portion cut from the test piece in order to perform a specified destructive test
50 003
all-weld test piece all-weld test specimen
test specimen that is composed only of deposited metal over the portion to be tested
50 004
transverse bend specimen
test specimen for a bend test that is transversely bisected by the portion of the weld included in it
50 005
longitudinal bend specimen
test specimen for a bend test that is longitudinally bisected by the portion of the weld included in it
50 006
face bend test
bend test in which one side of the weld specimen, as described in a) to c), is in tension: a) the side opposite that containing the root or opposite that to which the root is nearer; b) either weld face when the root is central; c) the outer side of a pipe or tube in welds made with pressure
50 008
root bend test
reverse bend test in which the root of the weld is on the tension side
50 009
side bend test
bend test in which the face of a transverse section of the weld is in tension
50 010
cracking test
test to determine the susceptibility to cracking of the weld metal or parent metal
50 011
hot cracking test solidification cracking test
test to determine the tendency of a welded t to develop hot cracks
50 012
peel test slug test; plug test
destructive test in which a resistance welded lap t is tested by applying a peel force which results in stresses mainly in the thickness direction of the weld
50 014
root bend specimen of butt weld
test specimen used in a root bend test for a butt weld
50 015
side bend specimen of test specimen used in a side bend test for cladding without a cladding without a butt weld butt weld
50 016
side bend test specimen of butt weld
test specimen used in a side bend test for a butt weld
50 020
testing level
degree of thoroughness and selection of parameter settings with which an NDT method is applied
50 021
testing organization
internal or external organization carrying out the destructive or non-destructive testing
50 023
face bend test specimen of butt weld
test specimen used in a face bend test for a butt weld
50 024
face bend test specimen of test specimen used in a face bend test for cladding without a cladding without a butt weld butt weld
BSI 2008
.
113
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
50 025
side bend test specimen of cladding with a butt weld
test specimen used in a side bend test for cladding with a butt weld
50 026
face bend test specimen of cladding with a butt weld
test specimen used in a face bend test for cladding with a butt weld
50 027
macroscopic examination
examination of a test specimen by the naked eye, or under low magnification, with or without etching
50 028
microscopic examination
examination of a test specimen by microscope with a magnification normally within 50 to 500 times, with or without etching
50 029
destructive testing
testing to detect internal or external imperfections, or assess mechanical or metallurgical properties by mechanical means, which generally result in the destruction of the material
50 030
non-destructive testing
act of determining the suitability of some material or component for its intended purpose using techniques that do not affect its serviceability
50 031
linear indication
In non-destructive testing, indication having a length greater than three times its width
50 032
non-linear indication
In non-destructive testing, indication having a length less than or equal to three times its width
50 033
object-to-film distance
In radiography, distance between the radiation side of the test object and the film surface, measured along the central axis of the radiation beam
50 034
penetrated thickness
In radiography, thickness of material penetrated by the radiation beam
50 035
projected area
area where imperfections distributed along the volume of the weld under consideration are imaged two-dimensionally
50 036
recording level
In non-destructive testing, evaluation level from which an indication is recorded
50 037
source size
In radiography, size of the radiation source
50 038
source-to-film distance
In radiography, distance between the radiation source and the film, measured in the direction of the beam
50 039
source-to-object distance
In radiography, distance between the radiation source and the source side of the test object, measured along the central axis of the beam
50 040
run-on test plate
test piece made by adding plates to the beginning of a t to give an extension of the weld for test purposes
50 041
run-off test plate
test piece made by adding plates to the end of a t to give an extension of the weld for test purposes
50 042
transverse tensile specimen
test specimen for a tensile test that is transversely bisected by the portion of the weld included in it
50 043
reverse bend test
bend test in which the face other than that specified for a face bend test is in tension
50 044
guided bend test
bend test made by bending the specimen round a specific former
50 045
controlled bend test
guided bend test in which special means are incorporated in the bending apparatus so that the specimen follows the shape of the former during bending
114
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
50 046
free bend test
bend test made without using a former
50 047
restrained weld test
cracking test in which the parts to be welded are secured to prevent all controllable movement during and after welding
50 048
U-tensile test
method of tensile testing spot or projection welds; after welding, the test plates are bent in a U shape (see Figure 91) and the specimen is then pulled apart
Figure 91
U-tensile test specimen
No.
Term
Definition
50 049
nick-break test
fracture test in which a specimen is broken from a notch cut at a predetermined position where the interior of the weld is to be examined
50 050
cruciform test piece; cruciform test specimen
1) flat plate to which two other flat plates are welded at right angles and on the same axis [see Figure 92a)] 2) flat plate to which two bars are welded at right angles and on the same axis [see Figure 92b)] 3) transverse section cut from the middle of 1) at right angles to the weld direction (see Figure 93)
Figure 92
Cruciform test pieces
BSI 2008
.
115
BS 499-1:2009
BRITISH STANDARD
Figure 93
Method of obtaining cruciform test specimen
No.
Term
Definition
50 051
cruciform test
test in which a cruciform test specimen is tested in tension
50 052
tongue-bend test specimen
portion so cut in two straight lengths of pipe ed by a butt weld as to produce a tongue containing a portion of the weld; the cuts are made so that the tongue is parallel to the axis of the pipes and the weld is tested by bending the tongue round a former (see Figure 94)
Figure 94
116
.
Tongue-bend test specimen
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
50 053
flattening test
test in which a welded pipe t is flattened until the internal walls are a specified distance apart
50 054
cross tension test
mechanical test in which a spot welded t between overlapping sheets is tested by stressing normal to the faying surface
50 055
shear test piece; shear test specimen
1) test piece of overlapping plates incorporating an agreed number of spot or projection welds (usually not more than three) (see Figure 95) NOTE This should not be confused with a shear test piece used for other purposes.
2) test piece as described in 1) prepared for testing in a tensile test machine by drilling out or otherwise rendering ineffective those welds not to be tested Figure 95
Shear test piece
No.
Term
Definition
50 056
pillow test
test, usually for seam welding, in which two plates of similar dimensions are placed flat on top of one another so that the edges approximately coincide; they are then welded together and hydraulic pressure is applied between the sheets causing them to form a ‘‘pillow’’
50 057
peaking
deviation from the desired curvature of a bend test specimen caused by differences in mechanical properties of parts of the specimen
BSI 2008
.
117
BS 499-1:2009
BRITISH STANDARD
Section 6. relating to weld imperfections No.
Term
Definition
60 001
imperfection
discontinuity in the weld or a deviation from the intended geometry NOTE Imperfections are, e.g. cracks, lack of penetration, porosity, slag inclusions.
60 002
metallurgical deviation
in welding, changes in the mechanical properties and/or metallurgical structure of the weld metal or heat affected zone compared to the properties of the parent metal
60 003
excessive penetration
NOTE Alternative term for ‘‘excess penetration’’ (see 60 040).
60 004
incompletely filled groove
continuous or intermittent channel in the surface of a weld, running along its length, due to insufficient weld metal NOTE The channel can be along the centre or along one or both edges of the weld. (see Figure 96)
Figure 96
Incompletely filled groove
No.
Term
Definition
60 005
undercut
irregular groove at a toe of a run in the parent metal, or in previously deposited weld metal, due to welding (see Figure 97) Figure 97
Undercut
No.
Term
Definition
60 006
continuous undercut
undercut of significant depth without interruption
60 007
intermittent undercut
short lengths of undercut, intermittent along the weld
60 008
overlap cold lapping
imperfection at a toe or root of a weld caused by metal flowing on to the surface of the parent metal without fusing to it
60 009
evaluation level
test level above which an indication is evaluated
60 010
surface pitting
imperfection in the surface of the parent metal usually in the form of small depressions
118
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
60 011
crack
linear discontinuity produced by fracture NOTE Cracks may be longitudinal, transverse, edge, crater, centreline, fusion zone, underbead, weld metal or parent metal.
60 012
hot crack solidification crack
material separations occurring at high temperatures along the grain boundaries (dendrite boundaries) when the level of strain and the strain rate exceed a certain level
60 013
cold crack
local rupture (intergranular or transgranular) appearing as a result of a critical combination of microstructure, stress and hydrogen content
60 014
lack of fusion
lack of union in a weld: a) between weld metal and parent metal, or b) between parent metal and parent metal, or c) between weld metal and weld metal
60 015
lack of sidewall fusion
lack of union between weld metal and parent metal at a side of a weld (see Figure 98)
60 016
lack of root fusion
lack of union at the root of a t (see Figure 99)
Figure 98
Lack of sidewall fusion
Figure 99
Lack of root fusion
No.
Term
Definition
60 017
lack of inter-run fusion
lack of union between adjacent runs of weld metal in a multi-run weld (see Figure 100)
Figure 100
Lack of inter-run fusion
No.
Term
Definition
60 018
incomplete penetration
failure of weld metal to extend into the root of a t (see Figure 101)
Figure 101
Incomplete root penetration
BSI 2008
.
119
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
60 019
solidification crack
hot crack formed during solidification from the liquid phase of weld metals NOTE It usually extends up to the surface of the weld metal, but sometimes can be subsurface.
60 020
inclusion
slag, flux, oxide, copper, tungsten or other foreign matter entrapped during welding; the defect is usually more irregular in shape than a gas pore; inclusions can be linear, isolated or clustered in their formation
60 021
linear inclusion slag line
inclusion of linear form situated parallel to the axis of a weld
60 022
solid inclusion
solid foreign substances entrapped in the solid metal
60 023
oxide inclusion
metallic oxide entrapped during welding
60 024
tungsten inclusion
inclusion of tungsten from the electrode in tungsten inert-gas welding
60 025
copper inclusion
inclusion of copper due to the accidental melting of the tube or nozzle in self-adjusting and controlled-arc welding, or to pick-up by between the copper nozzle and the molten pool in tungsten inert-gas welding
60 026
gas pore
spherical cavity, generally under 1.5 mm in diameter, formed by entrapped gas during the solidification of molten metal
60 027
gas cavity
cavity formed by entrapped gas
60 028
porosity
group of gas pores
60 029
indication
in non-destructive testing, representation or signal from a discontinuity
60 030
uniformly distributed porosity porosity distributed in a substantially uniform manner throughout a weld
60 031
localized porosity
porosity confined to a small area of a weld
60 032
linear porosity
string of gas pores situated parallel to the axis of a weld
60 033
elongated cavity
cavity occurring at the root of a weld due to the use of unstable arc conditions
60 034
shrinkage cavity
cavity due to the shrinkage of metal whilst in a plastic condition
60 035
wormhole pipe: deprecated
elongated to tubular cavity formed by entrapped gas during the solidification of molten metal
60 036
burn-through melt-through
localized collapse of the molten pool due to excessive penetration, resulting in a hole in the weld run
60 037
internal imperfection
imperfection that is not open to a surface or not directly accessible
60 038
systematic imperfection
imperfections that are repeatedly distributed in the weld over the weld lengths to be examined
60 039
stray arc
damage on the parent material resulting from the accidental striking of an arc away from the weld
60 040
excess penetration
excess weld metal protruding through the root of a fusion weld made from one side only (see Figure 102)
60 041
root concavity suck-back; underwashing
shallow groove that may occur in the root of a butt weld (see Figure 103)
120
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Figure 102
Excess penetration bead
No.
Term
Definition
60 042
shrinkage groove
shallow groove caused by contraction in the metal along each side of a penetration bead (see Figure 104)
Figure 104
Figure 103
Root concavity
Shrinkage groove
No.
Term
Definition
60 043
metal run-out
molten metal inadvertently lost from a weld by gravitational flow NOTE The term is used mainly in submerged-arc welding, where the effect arises from incorrect edge preparation.
60 044
sagged weld
weld in which the parent metal has been excessively softened during welding allowing the weld and adjacent parent metal to sag
60 045
excessive dressing underflushing
reduction in metal thickness caused by the removal of the surface of a weld and adjacent areas to below the surface of the parent metal
60 046
grinding mark
grooves in the surface of parent metal or of a weld made by a grinding wheel or surfacing tool
60 047
tool mark chipping mark
indentation in the surface of parent metal or of a weld, resulting from the application of a tool, e.g. a chipping tool, in preparation or dressing
60 048
hammer mark
indentation in the surface of parent metal or of a weld due to a hammer blow
60 049
torn surface
surface irregularity due to the breaking off of temporary attachments
60 050
slag trap
configuration in a t or t preparation that may lead to the entrapment of slag
60 051
blowhole
cavity, generally over 1.5 mm in diameter, formed by entrapped gas during the solidification of molten metal
60 052
crater pipe
depression due to shrinkage at the end of a run where the source of heat was removed
60 053
puckering
formation of an oxide-covered weld run or bead with irregular surfaces and with deeply entrained oxide films, that can occur when materials forming refractory oxides (e.g. aluminium and its alloys) are being welded
BSI 2008
.
121
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
60 054
fish eye
small bright area of cleavage fracture, caused by the presence of hydrogen, that is visible only on the fractured surface of weld metal
60 055
flat spot
area in a flash weld, revealed by breakage of the t, that has a shiny or relatively very smooth appearance and is roughly circular in shape with perhaps narrow streaks radiating from it
60 056
intrusion
projection of fused metal extending into the heat-affected zone of a resistance weld; an oxide or slag inclusion at the edge of a manual metal arc weld
60 057
lamellar tear
sub-surface crack in wrought parent material orientated parallel to the fusion boundary but located in or just beyond the heat affected zone, characterized by a series of decohered non-metallic inclusions linked by tearing in a stepwise morphology NOTE This tearing is the result of thermal welding strains in the through-thickness direction in material which has low throughthickness ductility due to the presence of such inclusions in the rolling plane. It is usually associated with cruciform, T and corner ts.
122
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Section 7. relating to cutting Subsection 70. relating to more than one subsection No.
Term
Definition
70 001
stack cutting
thermal cutting of a stack of plates usually clamped together
70 002
oxygen-arc cutting
thermal cutting in which ignition temperature is produced by an electric arc, and cutting oxygen is conveyed through the centre of an electrode, which is consumed in the process
70 003
gouging (thermal)
forming of a groove by means of thermal cutting
70 004
flame gouging
gouging using the principles of oxyfuel flame cutting
70 005
arc gouging
gouging using an arc cutting process variation
70 006
kerf
void left after metal has been removed in thermal cutting
70 007
waterjet cutting
process by which a high pressure water jet is used to erode a narrow channel in a material, with or without added abrasive grit
70 008
oxygen cutting
thermal cutting process using an oxygen/fuel gas flame to preheat the material to its ignition temperature and an oxygen jet to oxidize and remove material
70 009
cutting blowpipe
torch used in oxygen cutting for controlling the gases used to produce ignition temperature and for controlling and directing the stream of combustion gases
70 010
flame cutting
See oxygen cutting 70 008.
70 011
powder cutting
oxyfuel flame cutting in which a suitable powder is injected into the cutting oxygen stream to assist the cutting action
70 012
oxygen lance
steel tube, heated to its ignition point and consumed during operation, through which oxygen es NOTE The lance is packed with rods or else powder is fed through the lance.
70 013
air-arc cutting
thermal cutting process that uses the heat of an arc and cutting oxygen
70 014
plasma arc cutting
arc cutting process that uses a constricted arc and removes the molten metal with a high-velocity jet of ionized gas issuing from the constricting orifice
70 015
laser cutting
thermal cutting process usually ed by a gas jet which uses a focused laser beam of such intensity that it melts and vaporizes the material NOTE A distinction is made between laser oxyfuel flame cutting, laser fusion cutting and laser sublimation cutting.
70 016
gas jet laser cutting
See oxygen cutting 70 008.
70 017
thermal cutting
parting or shaping of materials by the application of heat with or without a stream of cutting oxygen
70 018
drag line
serration left on the face of a cut made by thermal cutting
70 019
drag
projected distance between the two ends of a drag line (see Figure 105)
BSI 2008
.
123
BS 499-1:2009
BRITISH STANDARD
Figure 105
Drag
No.
Term
Definition
70 020
underwater cutting
thermal cutting at such a depth below water level that the cutting action does not break the water surface
70 021
cutting head
one or more machine cutting blowpipes or plasma torches mounted together for making one or more cuts to produce the required edge profile
70 022
cutter steering system steering system
arrangement on a cutting machine for guiding and controlling the cutting head(s) along a desired path
70 023
cutting machine
thermal cutting equipment together with holding and moving devices for cutting metals
70 024
articulated-arm cutting machine
cutting machine with a hinged arm on which a cutting blowpipe or plasma torch and template following device are mounted in line with each other on the free end of the arm
70 025
cross-carriage cutting machine cutting machine with longitudinal and transverse carriages to move the cutting head and to permit profiling
70 026
single-cantilever cutting machine
cross-carriage cutting machine with a cutting area beneath a cutting head or heads mounted on a transverse cantilever carriage extending over one side of longitudinal tracks (see Figure 106)
70 027
double-cantilever cutting machine
cross-carriage cutting machine with two cutting areas each beneath a cutting head or heads mounted on a transverse cantilever extending over each side of the carriage (see Figure 107)
70 028
extended boom single-cantilever cutting machine
single-cantilever cutting machine with the cantilever lengthened to accommodate two cutting areas side by side (see Figure 108)
70 029
portal cutting machine gantry cutting machine
cross-carriage cutting machine with a cutting area beneath a cutting head or heads mounted on the transverse carriage between the longitudinal tracks (see Figure 109)
70 030
double-portal cutting machine portal cutting machine with two cutting areas side by side (see Figure 110)
70 031
portal-cantilever cutting machine
124
.
BSI 2008
combination of a portal and a single-cantilever cutting machine (see Figure 111)
BRITISH STANDARD
Figure 106
Figure 107
BS 499-1:2009
Single-cantilever cutting machine
Double-cantilever cutting machine
Figure 108
Extended boom single-cantilever cutting machine
Figure 109
Portal cutting machine
BSI 2008
.
125
BS 499-1:2009
BRITISH STANDARD
Figure 110
Double-portal cutting machine
Figure 111
Portal-cantilever cutting machine
Subsection 71. relating only to oxygen cutting No.
Term
Definition
71 001
oxygen cutting gas cutting: deprecated
thermal cutting of material by chemical reaction with oxygen after the appropriate part has been raised to ignition temperature
71 002
flame cutting
oxygen cutting in which the appropriate part of the material to be cut is raised to ignition temperature by an oxy-fuel gas flame
71 003
preheating oxygen
oxygen used at a suitable pressure in conjunction with fuel gas for raising to ignition temperature the metal to be cut
71 004
cutting oxygen
oxygen used at a pressure suitable for oxygen cutting
71 005
de-seaming
removal of surface defects from ingots, blooms, billets and slabs by means of manual thermal cutting
71 006
scarfing de-surfacing
removal of the surface or surfaces from blooms, billets and slabs by means of a flame cutting machine
71 007
hot cropping
oxygen cutting of hot ingots, blooms, billets and slabs to required lengths
71 008
powder cutting
oxyfuel flame cutting in which a suitable powder is injected into the cutting oxygen stream to assist the cutting action
71 009
flame washing
method of surface shaping and dressing of metal by flame cutting using a nozzle designed to produce a suitably shaped cutting oxygen stream
126
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
71 010
powder washing
flame washing with the introduction of powder into the cutting oxygen stream
71 011
oxygen lancing
oxyfuel flame cutting that uses an oxygen lance to produce holes or openings in a material
71 012
cutting blowpipe
device used in oxygen cutting for controlling the gases used to produce ignition temperature and for controlling and directing the stream of cutting oxygen
71 013
gouging blowpipe
cutting blowpipe with a nozzle designed for gouging
71 014
dual fuel blowpipe
oxygen cutting blowpipe that allows the use of an ixture of two fuel gases
71 015
flame planing machine
oxygen cutting machine capable of cutting a number of edges of a plate or plates simultaneously
71 016
cutter guide
device, attached to a manual cutting blowpipe, for maintaining the nozzle at a constant distance from the surface of the metal to be cut and assisting the operator in cutting
71 017
floating head
blowpipe holder on a flame cutting machine that, through a suitable linkage, is designed to follow the contour of the surface of the plate, thereby enabling the correct nozzle-toworkpiece distance to be maintained
71 018
venturi nozzle convergent/divergent nozzle
oxygen cutting nozzle designed to provide a high velocity cutting oxygen stream of approximately constant cross section
71 019
oxygen lance
steel tube, heated to its ignition point and consumed during operation, through which oxygen es
71 020
packed lance
oxygen lance packed with steel rods or wires
71 021
powder lance
oxygen lance in which powder is mixed with the oxygen stream
71 022
de-scaling blowpipe flame cleaning blowpipe
blowpipe fitted with a nozzle designed to give suitable flame conditions for spalling scale and removing particles from the surface of a workpiece
71 023
de-seaming blowpipe scarfing torch
blowpipe fitted with a nozzle suitable for de-seaming
71 024
rivet cutting blowpipe
blowpipe with a special nozzle for flame cutting off the protruding heads of rivets to facilitate their removal
71 025
tube cutting blowpipe
blowpipe fitted with a special nozzle designed to cut tubes from the inside
71 026
cutter head
part of a cutting blowpipe to which a nozzle is fitted
71 027
cutting oxygen bore
portion of the nozzle that controls the shape of the cutting oxygen stream leaving the orifice
71 028
parallel bore nozzle
oxygen cutting nozzle with a cylindrical cutting oxygen bore
71 029
step-type nozzle sheet metal nozzle
one-piece oxygen cutting nozzle with a single leading preheat orifice situated on a step at the end of the nozzle and a trailing cutting oxygen bore NOTE The nozzle is held in with the workpiece surface.
71 030
multi-preheat cutting nozzle multi-flame cutting nozzle
oxygen cutting nozzle with more than one orifice for the preheat gases
BSI 2008
.
127
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
71 031
annular preheat cutting nozzle annular flame cutting nozzle
oxygen cutting nozzle with an annular slot orifice for the preheat gases
71 032
one-piece nozzle
oxygen cutting nozzle that is integral and contains the preheat and cutting oxygen gasways and bores
71 033
nozzle skirt
extension of the outer walls of an oxygen cutting nozzle beyond the preheat and cutting oxygen orifices NOTE A skirt is generally used for nozzles that are used with propane gas.
71 034
wheel guide roller guide
cutter guide fitted with one or two wheels that are in with the workpiece during cutting
71 035
spade guide
cutter guide fitted with one or two small plates that are in with the workpiece during cutting
71 036
flame planing unit
parts of a flame planing machine that cut one edge of a plate
71 037
rip-trim cutter
cutting blowpipe attached to and leading a cutting head that is used to make an initial plate edge trimming cut in front of the cutting head
71 038
rivet washing
progressive washing away, by oxygen cutting, of a rivet head and part of its shank for purposes of removal
71 039
rivet piercing
removal of a rivet by initially piercing a hole through it by oxygen cutting
Subsection 72. relating only to arc cutting No.
Term
Definition
72 001
carbon-arc cutting
thermal cutting by melting using the heat of an arc between a carbon electrode and the metal to be cut
72 002
metal-arc cutting
thermal cutting by melting using the heat of an arc between a metal electrode and the metal to be cut
72 003
air-arc cutting
thermal cutting using an arc for melting the metal and a stream of air to remove the molten metal to enable a cut to be made
72 004
cutting electrode
electrode with a covering that aids the production of such an arc that molten metal is blown away to produce a curve or cut in the work
72 005
plasma arc cutting
cutting with a plasma arc in which the constricted arc melts a narrow region of metal which is then blown away by the force of the arc
72 006
arc cutting
thermal cutting by melting the metal to be cut using the heat of an arc
Subsection 73. relating only to spark erosion cutting No.
Term
Definition
73 001
spark erosion cutting
cutting by means of the eroding action of a recurring series of sparks between an electrode and the workpiece
128
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Subsection 74. relating only to electron beam cutting No.
Term
Definition
74 001
electron beam cutting
thermal cutting in vacuum by melting and vaporizing a narrow section of metal by the impact of a focused beam of electrons
Subsection 75. relating only to laser cutting No.
Term
Definition
75 015
laser cutting
thermal cutting using the energy from a laser beam focused to a sufficiently high intensity to remove material by vaporization (typical of non-metals) or by a combination of vaporization and liquid-phase ejection (typical of metals)
75 016
gas jet laser cutting
laser cutting with the addition of a gas jet directed to the point at which the beam meets the workpiece NOTE With metals the gas can either be oxidizing (for example in the case of CMn steel) which reacts with the heated metal to effect the cut, or inert (for example in the case of stainless steel) if a smooth surface with a smaller HAZ is required compared to oxidizing cutting; with non-metals a substantially inert gas is used which acts to cool the cut edge and prevent damage.
BSI 2008
.
129
BS 499-1:2009
BRITISH STANDARD
Section 8. relating to health and safety No.
Term
Definition
80 001
air sampling
process consisting of the collection, withdrawal or isolation of a fractional part of a larger volume of air NOTE It may include the simultaneous isolation of selected components.
80 003
breathing zone
space around the worker’s face from where the worker breathes
80 004
headband
part of the harness to which the welder’s face shield is fixed and which surrounds the head, or part of the welder’s goggles or welder’s spectacles which secures them onto the head
80 005
time weighted average concentration
concentration of a chemical agent in the atmosphere, averaged over a reference period
80 006
total airborne particles
all particles surrounded by air in a given volume of air
80 007
face shield hand shield hand screen welder’s shield
protective device held in the hand to shield the face and throat from injury during welding, fitted with a window consisting of welding glass and plain glass, and if necessary a heat filter
130
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Bibliography BS 499-1/IEV 50 (851):1991, Supplement, Welding and symbols – Supplement – Definitions for electric welding equipment BS 499-2c, Welding and symbols – European arc welding symbols in chart form BS EN 1011-1, Welding – Recommendations for welding of metallic materials – Part 1: General guidance for arc welding BS EN 1792, Welding – Multilingual list of for welding and related processes BS EN 13622, Gas welding equipment – Terminology – used for gas welding equipment BS EN 22553, Welded, brazed and soldered ts – Symbolic representation on drawings BS EN ISO 14555, Welding – Arc stud welding of metallic materials BS EN ISO 15607, Specification and qualification of welding procedures for metallic materials – General rules BS EN ISO 17659, Welding – Multilingual for welded ts with illustrations BS ISO 857-2, Welding and allied processes – Vocabulary – Part 2: Soldering and brazing processes and related PD CEN/TR 14599, and definitions for welding purposes in relation with EN 1792 ISO 857-1, Welding and allied processes – Vocabulary – Part 1: Metal welding processes ISO/DIS 25239-1, Friction stir welding – Aluminium – Part 1: Vocabulary
BSI 2008
.
131
BS 499-1:2009
132
.
BSI 2008
BRITISH STANDARD
This page deliberately left blank.
BRITISH STANDARD
BS 499-1:2009
Index a.c. welding generator, 32 070 abutment of raised edge, 10 094 accelerating voltage, 34 011 acceptance criteria, 10 066 acceptance level, 10 067 acid electrode, 32 030 actual throat thickness, 31 044 adaptive control system, 10 218 additional variable, 10 075 adjustable probe tool, 27 008 advancing side, 27 018 air gap, 10 063 air sampling, 80 001 air-acetylene blowpipe: bunsen type, 40 009 air-acetylene blowpipe: high temperature type, 40 010 air-arc cutting, 70 013 air-arc cutting, 72 003 alloy powder electrode, 32 111 all-position rightward welding, 33 084 all-weld test piece, 50 003 all-weld test specimen, 50 003 alternate polarity operation, 22 140 alternate polarity welding, 22 140 aluminothermic welding, 31 088 aluminothermic welding, 36 001 analogue timer, 21 039 angle centre electrode, 22 163 angle electrode, 22 077 angle of bevel, 31 038 angle offset electrode, 22 081 angle of preparation, 31 040 angle of preparation: deprecated, 31 038 annular flame cutting nozzle, 71 031 annular preheat cutting nozzle, 71 031 annular projection diameter, 22 045 anvil, 26 004 approved welding procedure, 10 160 arc blow, 32 074 arc blow compensator, 32 162 arc cutting, 72 006 arc damper, 32 162 arc energy, 32 116 arc eye, 10 041 arc fan, 32 141 arc gouging, 70 005 arc image welding, 35 009 arc length, 32 075 arc plasma welding, 32 066 arc spot welding, 32 011 arc stud welding, 32 015 arc voltage, 32 033 arc welding, 32 001 arc welding electrode, 32 016 arc welding plant, 32 036
arc welding power source, 32 036 arc welding transformer, 32 067 arcing time, 32 043 arcing time factor, 32 130 argon-arc torch, 32 142 arm, 22 091 articulated-arm cutting machine, 70 024 as welded, 10 089 assembled hose, 33 062 A-TIG, 32 186 atomic-hydrogen torch, 32 144 atomic-hydrogen welding, 32 107 automatic quick-acting shut-off device, 33 014 automatic stud welding equipment, 32 156 automatic welding, 10 011 auxiliary material, 10 090 averaging time, 22 165 back or front , 31 103 back plate, 22 161 back-bombarded gun, 34 020 backfire, 33 015 backflow, 33 016 backhand welding, 10 223 backing, 31 144 backing electrode, 22 036 backing gas, 32 089 back pressure: deprecated, 22 096, 22 098 back-step sequence, 31 002 back-step welding, 31 002 back-step welding, 31 003 back-up die, 22 162 backward force, 22 096 backward pressure, 22 098 backward welding, 33 008 baking oven, 31 094 bare wire elecrode, 32 108 base metal: deprecated, 10 013 basic electrode, 32 026 batch, 10 125 batch sample, 10 104 battery spot-welding machine, 22 107 bead, 31 064 beam current, 34 006 beam current control, 34 027 beam current pulsing, 34 012 beam deflection, 34 013 beam deflector, 34 028 beam oscillation, 34 014 beam power, 34 007 beam power density, 34 008 beam pulsing, 34 010 beam spinning, 34 036 beam welding, 31 161
bell butt t, 40 005 bias electrode, 34 023 bias voltage, 34 026 blending taper, 26 012 block sequence, 31 163 block welding, 31 163 blowhole, 60 051 blowing off the flame, 33 017 blowpipe head, 10 207 blowpipe shank, 10 208 blowpipe with a fixed mixer, 33 063 blowpipe with a single flow rate, 33 018 blowpipe with a variable injector, 33 065 blowpipe with an interchangeable injector, 33 066 blowpipe with multiple flow rates, 33 019 blowpipe with multiple flow rates adjusted by means of gas control valves, 33 067 blowpipe with nozzle mixing , 33 020 blowpipe with preliminary mixer, 33 021 blowpipe, 10 045 bolster, 22 090 bond weld, 40 011 both-side welding, 31 145 braided electrode, 32 173 branch T saddle t, 40 007 braze metal, 41 013 braze welding, 40 001 brazing, 41 001 brazing alloy, 41 009 breathing zone, 80 003 bronze filler metal, 40 004 bronze welding, 40 002 bronze welding rod, 40 004 buffer, 26 005 building-up, 10 057 bunsen-type mixer, 10 179 burden, 32 150 burn-back, 32 153 burn-off length, 23 007 burn-off rate, 32 087 burnt weld, 10 201 burn-through, 60 036 burst pressure, 33 022 butt t, 31 021 butt weld, 31 006 buttering, 31 136 butt-seam welding, 22 071 capacitor spot-welding machine, 22 105 capping run, 31 105 carbon-arc cutting, 72 001 carbon-arc welding, 32 004 BSI 2008
.
133
BS 499-1:2009
carburizing flame, 33 005 cascade firing, 22 159 cathode shield, 34 024 cathode, 34 021 cellulosic electrode, 32 025 chain intermittent weld, 31 164 chamfered member: deprecated, 31 173 chill time, 22 113 chipping goggles, 10 175 chipping hammer, 31 186 chipping mark, 60 047 clamp area, 22 095 clamp opening, 22 135 closed injector- mixer, 10 180 closed t preparation, 31 174 closing pressure, 33 068 CO2 gun, 32 143 CO2 spot welding, 32 106 CO2 welding, 32 104 coated filler rod: deprecated , 10 158 cold crack, 60 013 cold lapping, 60 008 cold pressure welding, 24 006 collar, 36 018 collar, 32 166 collision angle, 26 007 collision front, 26 009 combined blowpipe, 10 209 combined outfit: deprecated combined set: deprecated, 10 209 complete rectification, 32 139 concave fillet weld, 31 170 condenser-discharge spot-welding machine, 22 105 cone, 10 181 constant current control, 22 122 constant-pressure pressure welding, 24 004 constant-temperature pressure welding, 24 005 constant-voltage welding power source, 32 037 consumable electrode, 32 018 consumable nozzle, 37 002 consumable wire guide, 37 002 angle, 26 007 electrode, 32 031 tube, 31 087 continuous covered electrode, 32 184 continuous undercut, 60 006 continuous weld, 31 004 contracting parties, 10 127 controlled atmosphere brazing, 41 015 controlled bend test, 50 045 controlled-arc welding, 32 097 convex fillet weld, 31 169 cool time, 22 024 cooled shoe, 37 003 cooling rate, 10 084 welding, 32 099 134
.
BSI 2008
BRITISH STANDARD
convergent/divergent nozzle, 71 018 copper inclusion, 60 025 cored electrode, 34 028 cover glass, 10 172 corner t, 31 027 corrosion resistant surfacing, 10 129 cosmetic run, 31 137 cosmetic , 31 137 covered electrode, 32 020 covered filler rod, 10 158 crack, 60 011 cracking test, 50 010 cranked electrode, 22 082 cranked offset electrode, 22 082 crater filler, 32 115 crater pipe, 60 052 cross bar, 31 189 cross tension test, 50 054 cross-carriage cutting machine, 70 025 cross-wire weld, 22 014 cruciform t, 31 176 cruciform test, 50 051 cruciform test piece, 50 050 cruciform test specimen, 50 050 current decay, 22 148 current-off time, 22 115 cutter guide, 71 016 cutter head, 71 026 cutter steering system, 70 022 cutting blowpipe, 70 009 cutting blowpipe, 71 012 cutting electrode, 72 004 cutting head, 70 021 cutting machine, 70 023 cutting oxygen, 71 004 cutting oxygen bore, 71 027 cycle, 10 164 cycle counter, 22 176 cycle recorder, 22 177 cyclic reignition voltage, 32 120 cylinder bundles, 33 024 d.c. welding generator, 32 068 decay current, 22 147 decay time, 22 146 deep penetration electrode, 32 112 deflection coils, 34 028 deformation, 24 010 delayed firing, 22 158 delayed non-beat, 22 154 dense slag, 32 177 deposited metal, 10 018 deposition coefficient, 32 083 deposition efficiency, 32 082 deposition rate , 10 022 depth of preparation, 31 106 depth of raised edge, 31 107 depth of root face, 31 108 de-scaling blowpipe, 71 022 de-seaming, 71 005 de-seaming blowpipe, 71 023
design throat thickness, 31 045 destructive testing, 50 029 de-surfacing, 71 006 die, 22 087 die area, 22 095 die gap, 22 134 die opening, 22 134 diffusion welding, 21 022 diffusion welding, 25 001 digital timer, 21 038 dilution, 31 098 diminishing bell butt t, 40 006 diode gun, 34 018 dip brazing, 41 003 dip transfer, 32 057 dipped electrode, 32 174 directly heated gun, 34 017 discharge of the relief valve, 33 069 dissimilar material t, 10 088 dissolved acetylene, 10 213 distortion bung, 26 013 distortion plug, 26 013 double-bevel butt weld, 31 166 double-cantilever cutting machine, 70 027 double-conductor connection cable, 22 041 double-cranked electrode, 22 164 double-J butt weld, 31 014 double-portal cutting machine, 70 030 double-side single-run welding, 31 146 double-U butt weld, 31 012 double-V butt weld, 31 010 down force, 27 021 downhand position: deprecated, 31 054 drag, 70 019 drag line, 70 018 drooping characteristic welding power source, 32 038 drooping characteristic welding power source, 32 125 droplet transfer, 32 055 drying oven, 31 095 dual fuel blowpipe, 71 014 dual gun control, 22 156 dual gun dual sequence control, 22 157 dual gun dual welding cycle control, 22 157 dual-pressure cycle, 22 119 duty cycle, 10 035 dwell, 21 016 dwell time, 21 017, 22 026 dwell time at end of weld, 27 026 dwell time at start of weld, 27 025 dynamic characteristic, 32 073 EB welding, 34 001 edge distance, 10 102
BRITISH STANDARD
edge t, 31 028 edge preparation, 31 036 edge weld, 31 020 effective electrode efficiency, 32 084 effective length, 31 181 effective throat thickness, 31 046 electrode, 22 015, 32 016 electrode clearance, 22 181 electrode area, 22 095 electrode current range, 32 136 electrode efficiency, 32 151 electrode extension, 32 052 electrode face, 22 160 electrode force, 22 097 electrode gap, 22 181 electrode holder, 10 042 electrode negative, 32 147 electrode pick-up, 10 038 electrode pick-up, 22 085 electrode positive, 32 146 electrode pressure, 22 020 electrode recovery, 32 151 electrode shank, 22 016 electrode tip, 22 075 electrode wheel, 22 017 electrode wheel head, 22 189 electrode yield, 32 151 electro-gas welding, 32 010 electron beam cutting, 74 001 electron beam welding machine, 34 016 electron beam welding, 34 001 electron gun, 34 002 electronic frequency converter, 22 149 electroslag welding, 31 090 electro-slag welding, 37 001 electro-slag welding flux, 37 005 elongated cavity, 60 033 end preparation, 31 036 end tapering, 31 190 engine driven power source, 32 071 essential variable, 10 074 evaluation level, 60 009 examiner, 10 068 examining body, 10 069 excess flow cut-off valve, 33 025 excess penetration , 60 040 excess weld metal, 31 050 excessive dressing, 60 045 excessive penetration, 60 003 exit hole, 27 030 expansion gun, 22 185 explosive cladding, 21 023 explosive welding, 26 001 extended boom, 70 028 external gas leakage, 33 070 extruded electrode, 32 175 face bend test, 50 006 face bend test specimen of butt weld, 50 023
BS 499-1:2009
face bend test specimen of cladding with a butt weld, 50 026 face bend test specimen of cladding without a butt weld, 50 024 face mask, 10 176 face shield, 80 007 faying surface, 10 151 feather, 10 182 feather edge, 31 034 control system, 10 218 ferrite number, 10 117 ferrule, 32 167 field electrode, 34 024 filament, 34 021 filament current, 34 022 filler metal , 10 014 filler rod, 10 016 filler wire, 10 015 fillet weld, 31 015 fillet, 32 166 filling run(s), 31 109 filter glass, 10 043 fin, 22 092 final current, 22 174 finishing welding, 10 140 firecracker welding, 32 103 fire welding, 21 042 firing angle, 22 126 fish eye, 60 054 fitness-for-purpose, 10 092 fitted hose, 10 187 fixed bobbin tool, 27 010 fixed probe, 27 006 fixed shield , 10 171 flame arrestor, 71 022 flame cleaning blowpipe, 71 022 flashback arrester, 10 193 flame brazing, 41 004 flame cutting, 70 010 flame cutting, 71 002 flame gouging, 70 004 flame normalizing, 10 195 flame planing machine, 71 015 flame planing unit, 71 036 flame snap-out, 10 189 flame washing, 71 009 flash, 23 008, 27 032 flash butt welding: deprecated, 22 003 flash welding with preheating, 22 066 flash welding, 22 003 flashback, 10 046 flashing, 22 040 flashing allowance, 22 018 flashing current, 22 028 flashing loss, 22 038 flashing speed, 22 031 flashing time, 22 021 flashing travel, 22 030 flat electrode, 22 083 flat face fillet weld, 31 167
flat position, 31 054 flat spot, 60 055 flattening test, 50 053 floating head, 71 017 fluid slag, 32 180 flush weld, 31 172 flux, 10 017 flux cored electrode, 32 022 flux-cored wire: deprecated, 32 022 flux-dip brazing, 41 008 fluxed ferrule, 32 168 flyer plate, 26 003 focal length, 35 006 focal spot, 35 007 focus control, 34 030 focusing lens, 34 029 focusing lens current, 34 037 foil butt-seam welding, 22 072 foil surface, 22 062 foil length, 22 057 foil thickness, 22 050 foil width, 22 055 follow-up, 22 182 foot-operated welding machine, 22 100 force control, 27 020 forehand welding, 10 222 forge delay time, 22 035 forge force, 21 013 forge length, 23 012 forge pressure, 23 011 forge rate, 23 013 forge time, 21 015 forge welding, 21 042 forging force, 21 013 forging pressure, 23 011 forging speed, 23 006 forging time, 21 015 forward force, 21 027 forward pressure, 21 032 forward welding, 33 007 free bend test, 50 046 friable slag, 32 179 friction force, 23 002 friction pressure, 23 003 friction speed, 23 004 friction stir welding, 23 009 friction time, 23 005 friction welding, 23 001 friction welding forge force, 23 010 full penetration welding, 31 066 full vacuum system, 34 032 fully mechanized welding, 10 135 function test, 10 109 furnace brazing, 41 005 fused melt, 32 149 fusible insert, 31 080 fusion boundary, 10 159 fusion face, 31 178 fusion face (fillet weld), 31 111 fusion face (prepared), 31 112 fusion face (unprepared), 31 113 BSI 2008
.
135
BS 499-1:2009
fusion fusion fusion fusion fusion
line, 10 026, 10 159 penetration, 31 114 spot weld, 31 171 welding, 31 001 zone , 10 025
BRITISH STANDARD
gantry cutting machine, 70 029 gap, 10 063 gap bar, 31 189 gas backing, 31 091 gas cavity, 60 027 gas cutting: deprecated, 71 001 gas economizer, 10 190 gas envelope, 10 183 gas flow rate, 31 092 gas fluxing, 40 003 gas jet laser cutting, 70 016 gas jet laser cutting, 75 016 gas laser, 35 005 gas pore, 60 026 gas regulator, 10 047 gas shield, 32 046 gas welding, 33 001 gas-shielded arc welding, 32 077 gas-shielded metal-arc welding, 32 078 globular transfer, 32 054 gouging (thermal), 70 003 gouging blowpipe, 71 013 granular flux filled stud, 32 163 gravity welding with covered electrode, 32 076 grid electrode, 34 023 grinding mark, 60 046 groove weld, 10 214 guide tube, 32 114 guided bend test, 50 044 gun, 22 155 gun welding head, 22 155
heat resistant surfacing, 10 130 heat time, 22 111 heat-affected zone, 10 024, 27 027 heater current, 34 022 heating rate, 10 085 heating time, 24 007 heel, 27 009 heel plunge depth, 27 017 helmet, 10 177 heterogeneous t, 10 144 HF induction welding, 21 003 HF ionizer: deprecated, 32 124 HF pressure welding, 24 002 HF reignition, 32 121 HF resistance welding, 22 013 HF unit, 32 124 high lift system, 22 180 high pressure blowpipe, 10 100 high pressure blowpipe, 33 029 high voltage electron gun, 34 005 hold time, 22 026 homogeneous t, 10 095 hook, 27 038 horizontal overhead position, 31 058 horizontal position, 31 060 horizontal vertical position, 31 055 hose assembly, 33 031 hose clamp, 33 032 hose coupler, 10 188 hose coupling nipple, 10 186 hose coupling nut, 10 185 hose tail, 33 034 hot crack, 60 012 hot cracking test, 50 011 hot cropping, 71 007 hydraulic back pressure valve, 10 194 hydrogen controlled electrode, 32 027 hydrogen valve, 32 145
half-cycle welding, 22 074 hammer mark, 60 048 hand-operated welding machine, 22 099 hand screen, 80 007 hand shield, 80 007 hard facing electrode, 32 113 hard facing, 10 033 hard surfacing, 10 033 hard surfacing electrode, 32 113 hard vacuum system, 34 032 harsh flame, 10 211 HAZ, 10 024. 27 027 head lowering time, 22 168 head mixing blowpipe, 10 210 head screen, 10 177 head shield, 10 177 headband, 80 004 heat control, 22 121 heat diffusion time, 22 172 heat filter, 10 044 heat input, 10 064
idling time, 10 162 igniter, 36 004 ignition powder, 36 003 imperfection, 60 001 inclined electrode, 22 077 inclined position, 31 062 included angle, 31 040 inclusion, 60 020 incomplete penetration, 27 034, 60 018 incompletely filled groove, 60 004 indentation, 22 053 indentation depth, 22 059 indication, 60 029 indirect spot welding, 22 034 induction brazing, 41 006 induction spot-welding machine, 22 106 inductor spot-welding machine, 22 106 inert-gas consumable electrode spot welding, 32 013
136
.
BSI 2008
inert-gas tungsten-arc spot welding, 32 014 inherent rectification, 32 140 initial current, 22 173 initial force, 21 028 initial inclination, 26 006 initial plate angle, 26 006 initial pressure, 21 033 injector-mixer, 33 035 insert, 22 088 interface, 21 002 interface: deprecated, 10 151 interface: deprecated, 22 094 intermittent undercut, 60 007 intermittent weld, 31 005 internal gas leakage, 33 071 internal imperfection, 60 037 inter temperature, 31 085 interpulse time, 10 196 intrusion, 60 056 inverter welding power source, 32 042 iron oxide electrode, 32 110 iron powder electrode, 32 028 jet, 26 010 t, 10 061 t efficiency, 10 150 t length, 10 124 t line remnant, 27 036 t preparation, 10 060 t recognition, 10 219 t tracking, 10 221 t welding, 10 142 kerf, 70 006 keyhole technique, 31 147 kissing bond, 27 037 lack of fusion, 60 014 lack of inter-run fusion, 60 017 lack of root fusion, 60 016 lack of sidewall fusion, 60 015 land, 31 035 lap t, 31 026 lap t sheet thinning, 27 039 lap length, 10 123 lap width, 10 121 lapped area, 10 136 laser, 35 003 laser cutting, 70 015 laser cutting, 75 015 laser welding, 35 002 lateral offset, 27 013 layer, 10 056 layer of capping runs, 31 117 layers of filling runs, 31 118 leftward welding, 33 007 leg, 31 180 leg length, 31 043 length of raised edge, 31 119 lift, 10 154
BRITISH STANDARD
lift, 32 161 light radiation welding, 35 001 linear inclusion, 60 021 linear indication, 50 031 linear porosity, 60 032 liquid phase diffusion welding, 25 003 load current, 32 131 load voltage, 32 132 localized porosity, 60 031 longitudinal bend specimen, 50 005 longitudinal edge of preparation, 31 120 longitudinal edge of root face, 31 121 longitudinal side of raised edge, 31 122 low hydrogen electrode: deprecated, 32 026 low pressure blowpipe, 10 101 low pressure blowpipe, 33 036 low voltage electron gun, 34 003 machine stroke, 22 132 macroscopic examination, 50 027 MAG welding, 32 005 magnetically-impelled arc butt welding, 21 024 main arc, 32 044 manifold regulator, 10 192 manifold systems, 33 072 manipulation, 10 217 manipulator, 31 063 manual metal-arc welding, 32 003 manual quick acting shut-off valve, 33 042 manual welding, 10 007 manufacturer’s previous welding experience, 10 113 manufacturing organization, 10 098 mash seam weld, 22 063 maximum continuous hand-welding current, 32 134 maximum operating pressure, 33 073 maximum permissible external leakage rates, 33 074 maximum throat thickness: deprecated, 31 192 maximum welding current, 32 133 mechanized welding, 10 010 medium voltage electron gun, 34 004 melt, 32 148 melt run, 31 071 melting rate, 32 087 melt-through, 60 036 metal active-gas welding, 32 005 metal cored electrode, 32 023 metal inert-gas welding, 32 006 metal recovery, 32 082 metal run-out, 60 043 metal transfer, 32 053 metal-arc cutting, 72 002 metal-arc spot welding, 32 012 metal-arc welding, 32 002
BS 499-1:2009
metallized fluxed stud, 32 164 metallurgical deviation, 60 002 micro-plasma arc welding, 32 080 microscopic examination, 50 028 MIG gun, 32 143 MIG pulsed-arc welding, 32 169 MIG spot welding, 32 013 MIG welding, 32 006 mitre fillet weld, 31 168 mixer without injector action, 33 044 MMA welding, 32 003 modulator, 22 178 molten pool, 31 184 motor generator welding power source, 32 127 motor-operated welding machine, 22 102 mould, 36 011 multifunctional safety device, 33 046 multiple spot welding, 22 006 multi-flame cutting nozzle, 71 030 multi-power welding, 32 101 multi-preheat cutting nozzle, 71 030 multi-pressure cycle, 22 179 multi-run welding, 31 148 multi-stage regulator, 10 192 nail head welding, 22 064 narrow gap welding, 32 090 neutral flame, 33 003 nick-break test, 50 049 no-load voltage, 32 035 nominal electrode efficiency, 32 058 nominal inlet pressure, 33 077 nominal outlet pressure, 33 076 nominal thickness, 10 106 non-beat, 22 153 non-consumable electrode, 32 017 non-destructive testing, 50 030 non-essential variable, 10 075 non-linear indication, 50 032 non-repeat operation, 22 152 non-return valve, 33 048 non-shielded welding, 32 182 non-synchronous control, 22 124 non-transferred arc, 10 037 non-transferred arc, 10 168 non-vacuum system, 34 034 nose: deprecated, 31 031 nozzle skirt, 71 033 nozzle, 10 206 nozzle-constricted arc, 10 165 nugget, 27 029 nugget diameter, 22 046 nugget overlap, 22 060 nugget thickness, 22 051 object-to-film distance, 50 033 offset electrode, 22 078 off-time, 22 024 one-piece nozzle, 71 032 one-side welding, 31 149
on-time, 22 111 open arc welding, 32 096 open circuit voltage, 32 035 open injector-mixer, 10 179 open t preparation, 31 175 operational stroke, 22 133 optical viewing system, 34 031 out of vacuum system, 34 034 overall weld metal recovery, 32 085 overhang, 21 037 overhead position, 31 061 overlap, 10 131 overlap, 60 008 oxide inclusion, 60 023 oxidizing flame, 33 006 oxy-acetylene pressure welding, 24 003 oxy-acetylene welding, 33 002 oxy-fuel gas pressure welding, 21 020 oxygen cutting, 70 008, 71 001 oxygen lance, 70 012 oxygen lance, 71 019 oxygen lancing, 71 011 oxygen-arc cutting, 70 002 packed lance, 71 020 pad electrode, 22 083 parallel bore nozzle, 71 028 parallel spot welding, 22 137 parallel welding, 32 100 parent material, 10 126 parent metal, 10 013 parent plate, 26 002 partial penetration weld, 31 067 partial rectification, 32 138 partial vacuum system, 34 033 partially transferred arc, 10 169 particle transfer frequency, 32 056 partly mechanized welding, 10 008, 10 155 , 10 021 peaking, 50 057 pedal-operated welding machine, 22 100 peel test, 50 012 penetrated thickness, 50 034 penetration bead, 31 182 penetration bead thickness, 31 123 penetration , 31 183 penetration run, 31 183 percussion welding, 22 012 permanent backing ring, 31 076 permanent backing, 31 075 perveance, 34 025 phase angle, 22 126 phase displacement, 22 175 phase shift, 22 125 pick-up, 10 040 pillow test, 50 056 pilot arc, 32 045 pincer spot-welding machine, 22 104 pipe: deprecated, 60 035 BSI 2008
.
137
BS 499-1:2009
pitch of projections, 22 048 plain glass, 10 172 plasma arc, 10 203 plasma arc cutting, 70 014 plasma arc cutting, 72 005 plasma arc welding, 32 066 plasma gas, 10 082 plasma gun: deprecated, 32 050 plasma jet, 10 204 plasma MIG welding, 32 091 plasma torch, 32 050 plasma weld surfacing, 10 205 plate edge, 10 097 plate thickness, 10 105 platen, 22 089 plier spot-welding machine, 22 104 plug test, 50 012 plug weld, 31 017 plugging material, 36 009 poke gun, 22 184 porosity, 60 028 porous slag, 32 178 portable spot-welding machine, 22 103 portal cutting machine, 70 029 portal-cantilever cutting machine, 70 031 position control, 27 012 positioner, 31 063 post-braze diffusion treatment, 41 014 post-heat time, 22 114 post-heating current , 22 118 post-heating force, 21 031 post-heating pressure, 21 036 post-heating pressure time, 22 167 post-weld heat treatment, 10 081 post-weld time, 22 142 post-weld upset force, 21 030 post-weld upset pressure, 21 035 pouring gate, 36 013 powder cutting, 70 011 powder cutting, 71 008 powder lance, 71 021 powder plasma welding, 32 092 powder washing, 71 010 power arc: deprecated, 32 044 power-operated welding machine, 22 101 preheat, 10 083 preheat maintenance temperature, 10 137 preheat time, 22 109 preheating allowance, 22 183 preheating current, 22 117 preheating gate, 36 012 preheating loss, 22 131 preheating oxygen, 71 003 preheating temperature, 10 138 pre-production welding test, 10 111 pressure application time, 22 169 pressure area, 21 026 138
.
BSI 2008
BRITISH STANDARD
pressure decrease time, 22 170 pressure head, 22 188 pressure regulator, 10 047 pressure relief valve, 33 051 pressure welding, 24 001 pressure-off time, 22 116 pressure-sensitive cut-off valve, 33 050 pre-weld time, 22 141 probe, 27 002 production sample testing, 10 112 production test, 10 110 production welding, 10 133 productive welding time, 10 145 programme control, 22 120 projected area, 50 035 projection diameter, 22 044 projection height, 22 052 projection length, 22 056 projection welding, 22 010 projection width, 22 054 proof pressure, 33 052 protrusion, 10 153 puckering, 60 053 pull technique, 32 093 pulsation welding, 22 073 pulse, 10 050 pulse time, 10 051 pulsed MIG welding, 32 064 pulsed TIG welding, 32 065 push gun, 22 184 push technique, 32 094 push-pull series spot welding, 22 138 qualified person, 10 143 quality level, 10 091 quench time, 22 113 quick-action coupling with shut-off valve, 33 054 quiver, 31 096 radius of raised edge, 31 124 range of qualification, 10 103 rate of slope, 22 128 rate of travel, 31 082 reaction gun, 22 185 recording level, 50 036 recovery time, 10 163 rectifier converter, 10 199 rectifier welding power source, 32 128 reducing flame, 33 004 reinforcement overfill, 31 050 repeat operation, 22 151 residual welding stress, 10 048 resistance brazing, 41 002 resistance butt welding, 22 002 resistance stud welding, 22 011 resistance weld setter, 22 061 resistance welding, 22 001 resistance welding electrode, 22 015 re-start, 10 080
restrained weld test, 50 047 restriking voltage, 32 118 retreating side, 27 019 reverse bend test, 50 043 reverse side, 10 115 rightward welding, 33 008 rip-trim cutter, 71 037 riser, 36 014 rising characteristic welding power source, 32 126 rivet cutting blowpipe, 71 024 rivet piercing, 71 039 rivet washing, 71 038 robot, 10 216 robotic welding, 10 134 rocker arm, 22 186 roll welding, 10 215 roller guide, 71 034 roller spot welding, 22 067 root (of preparation), 31 179 root (of weld), 31 126 root bend specimen of butt weld, 50 014 root bend test, 50 008 root concavity, 60 041 root face, 31 031 root gap, 31 125 root , 31 068 root penetration, 31 127 root radius, 31 041 root run, 31 068 root width, 31 128 rotary welding transformer, 22 187 rotation, 10 132 routine manufacturing test, 33 078 row pitch, 22 047 run, 10 021 run-off plate, 31 074 run-off test plate, 50 041 run-on plate, 31 073 run-on test plate, 50 040 run-off test plate, 50 041 run-on plate, 31 073 run-on test plate, 50 040 rutile electrode, 32 024 SA welding, 32 008 safety device, 33 079 sagged weld, 60 044 salt bath brazing, 41 007 scarfing, 71 006 scarfing torch, 71 023 seal weld, 31 018 sealing run, 31 070 sealing weld, 31 018 seam tracking, 10 221 seam welding, 22 008 self-adjusting arc welding, 32 098 self-reacting bobbin tool, 27 011 self-regulating arc-welding transformer, 32 171
BRITISH STANDARD
self-regulating d.c. welding generator, 32 172 self-shielding tubular-cored arc welding, 32 095 semi-automatic welding, 10 155 semi-fusion welding: deprecated, 33 085 separately pumped electron gun, 34 035 sequence firing: deprecated, 22 159 sequence timer, 21 040 series arc welding, 32 102 series spot welding, 22 007 shear test piece, 50 055 shear test specimen, 50 055 sheathed electrode, 32 109 sheet metal nozzle, 71 029 shielding gas, 31 150 shocked metal zone, 26 011 shoe, 31 188 shop weld, 10 156 short bell branch t, 40 008 shoulder, 27 007 shoulder footprint, 27 031 shrinkage cavity, 60 034 shrinkage groove, 60 042 side bend specimen of cladding without a butt weld, 50 015 side bend test, 50 009 side bend test specimen of butt weld, 50 016 side bend test specimen of cladding with a butt weld, 50 025 side edge of preparation, 31 129 side edge of root face, 31 130 side edge of workpiece, 10 093 sideways force, 27 022 sideways title angle, 27 015 simultaneous double side welding, 31 151 single-bevel butt weld, 31 165 single-cantilever cutting machine, 70 026, 70 028 single-conductor connection cable, 22 042 single-J butt weld, 31 013 single operation, 22 152 single-run welding, 31 152 single-U butt weld, 31 011 single-V butt weld, 31 008 site weld, 10 157 size, 31 043 skip sequence, 31 162 skip welding, 31 162 slag, 31 083 slag basin, 36 015 slag line, 60 021 slag pot, 36 016 slag shute, 36 017 slag trap, 60 050 sleeve t, 10 170 slitter bar: deprecated, 31 189
BS 499-1:2009
slope, 10 116 slope control, 22 127 slope time, 22 129 slope-down, 31 138 slope-led welding power source, 32 129 slope-up, 31 139 slot lap t, 31 143 slot weld, 31 143 slow butt welding: deprecated, 22 002 slug loaded stud, 32 165 slug test, 50 012 soft flame, 10 212 soft vacuum system, 34 033 solid inclusion, 60 022 solid-phase welding, 24 001 solid slag, 32 177 solid state diffusion welding, 25 002 solid state laser, 35 004 solidification crack, 60 019, 60 012 solidification cracking test, 50 011 source size, 50 037 source-to-film distance, 50 038 source-to-object distance, 50 039 spade guide, 71 035 spark erosion cutting, 73 001 spark reignition, 32 121 spark starting, 32 119 spatter, 10 034 spatter loss, 32 154 spatter shield, 32 158 specific beam power, 34 008 spelter, 41 010 splash, 22 093 spontaneous ignition temperature, 33 080 spot position, 34 015 spot welding, 22 004 spray transfer, 32 055 square butt weld, 31 007 squeeze time, 22 110 stack cutting, 70 001 staggered intermittent weld, 31 009 staggered resistance welds, 22 043 standard discharge, 33 081 standard material, 10 076 stand-off distance, 26 008 stand-off gap, 26 008 starting block, 37 004 static characteristic, 32 072 static plate, 26 002 steering system, 70 022 step time, 22 112 step-by-step roller spot welding, 22 068 step-by-step seam welding, 22 069 step-by-step welding, 22 070 step-type nozzle, 71 029 stick electrode, 32 183 stitch welding, 22 005 stone, 36 006
stopping time, 23 014 stopping-off agent, 41 011 stored-energy welding, 10 200 straight electrode, 22 079 straight flash welding, 22 065 stray arc, 60 039 strength weld , 10 012 striking plate, 32 155 striking voltage, 32 034 stringer bead, 31 086 stringer bead, 31 191 strip cladding, 32 081 stub end, 32 061 stub-in, 32 152 stud, 10 152 stud welding, 10 032 stud welding controller, 32 159 stud welding gun, 32 160 stud welding tool, 32 157 submerged-arc welding, 32 008 suck-back, 60 041 surface fusion welding, 33 085 surface pick-up, 22 086 surface pitting, 60 010 surfacing, 10 058 surge injector, 32 123 surge reignition, 32 122 sustained backfire, 33 060 swan-necked electrode, 22 164 synchronous control, 22 123 synergic pulsed MIG welding, 32 185 systematic imperfection, 60 038 tack sequence, 31 097 tack weld , 31 016 tack welding, 31 141 tacking , 31 140 tacking run, 31 140 tandem arc welding, 32 187 tape butt-seam welding, 22 072 tapered member, 31 173 tapping pin, 36 008 temperature sensitive cut-off device, 33 061 temporary backing ring, 31 078 temporary backing, 31 077 temporary weld, 31 154 test coupon: deprecated, 50 001 test piece, 50 001 test specimen, 50 001, 50 002 testing level, 50 020 testing organization, 50 021 thermal cutting, 70 017 thermal efficiency, 31 155 thermit crucible, 36 005 thermit mixture, 36 002 thermit welding, 36 001 thermomechanically affected zone, 27 028 thimble, 36 007 threaded hose connection , 10 184 three-phase welding machine, 10 161 BSI 2008
.
139
BS 499-1:2009
three-phase welding power source, 10 161 throat, 22 032 throat depth, 22 032 throat gap, 22 033 throat thickness, 31 044 TIG pulsed-arc welding, 32 170 TIG spot welding, 32 014 TIG torch, 32 142 TIG welding, 32 007 tilt angle, 27 014 time weighted average concentration, 80 005 tip, deprecated, 10 206 T-t, 31 022 TMAZ, 27 028 toe flash, 27 022 toe, 31 037 tongue-bend test specimen, 50 052 tool, 27 001 tool mark, 60 047 tool plunge depth, 27 016 torch, 32 047 torch: deprecated, 10 045 torch angle, 32 051 torch brazing: deprecated, 41 004 torn surface, 60 049 total airborne particles, 80 006 total allowance, 21 011 total loss, 21 041 touch time, 22 171 touch type electrode, 32 031 touch welding, 32 099 trailing gas shield, 31 093 transfer efficiency, 31 187 transferred arc, 10 036 transferred arc, 10 167 transverse bend specimen, 50 004 transverse tensile specimen, 50 042 travel angle, 27 014 travel speed, 27 024, 31 082 traversing force, 27 023 traversing rate, 27 024 traversing speed, 27 024 tread, 22 084 triode gun, 34 019 true arc voltage, 32 117 tube cutting blowpipe, 71 025 tubular cored electrode, 32 021 tungsten inclusion, 60 024 tungsten inert-gas welding, 32 007 tungsten-arc spot welding, 32 105 twin wire welding, 32 188 two-stage initiation, 22 150 two-stage regulator, 10 191 type test, 33 082 typical electrode current, 32 135 ultrasonic welding, 21 021 undercut, 60 005 underfill, 27 033 underflushing, 60 045 140
.
BSI 2008
BRITISH STANDARD
underwashing, 60 041 underwater cutting, 70 020 uniformly distributed porosity, 60 030 union nut: deprecated, 10 185 unipolarity operation, 22 139 unipolarity welding, 22 139 upper workpiece surface, 10 114 upset, 21 004 upset allowance, 21 005 upset butt welding: deprecated, 22 002 upset current, 22 037 upset current time, 22 023 upset force, 21 008 upset length, 21 012 upset metal, 21 004 upset pressure, 21 010 upset speed, 21 006 upset time, 22 022 upset travel, 22 130 upsetting, 21 025 upsetting time, 24 008 upstream pressure for type testing, 33 083 U-tensile test, 50 048 vacuum brazing, 41 012 venturi nozzle, 71 018 vertical centre electrode, 22 079 vertical down position, 31 057 vertical electrode, 22 076 vertical offset electrode, 22 080 vertical up position, 31 056 viscous slag, 32 181 void, 27 035 volumetric flaw, 27 035 vortex-constricted arc, 10 166 wandering arc, 32 063 wandering sequence, 31 162 waterjet cutting, 70 007 wax pattern, 36 010 wearing depth, 22 136 weave bead, 31 156 weave technique, 31 157 weaving, 31 185 weaving amplitude, 31 158 weaving frequency, 31 159 weaving width, 31 160 weld, 10 002 weld area, 22 094 weld delay time, 22 143 weld edge: deprecated, 31 037 weld face, 31 177 weld feature recognition, 10 220 weld heat time, 22 144 weld interface, 10 119 weld interval heat time, 22 145 weld junction, 10 159 weld length, 10 122 weld metal, 10 020
weld nugget, 22 058 weld pitch, 22 049 weld pool, 31 072, 31 184 weld pool backing, 31 144 weld preparation, 10 060 weld recognition, 10 220 weld rotation, R, 31 052 weld run sequence, 10 031 weld slope, S, 31 051 weld slug, 22 108 weld surface with bead ripples, 31 102 weld time, 22 025 weld timer, 10 198 weld toe angle, 31 133 weld width, 31 047 weld zone , 10 023 weldability, 10 202 weldable primer: deprecated, 10 052 welder, 10 003 welder: deprecated, 10 005 welder’s shield, 80 007 welding, 10 001 welding accessories, 10 055 welding blowpipe, 33 010 welding conditions, 10 146 welding consumables, 10 053 welding converter, 10 199, 32 040 welding co-ordination personnel, 10 128 welding co-ordinator, 10 099 welding current, 22 027 welding cycle, 10 197, 21 007 welding cycle time, 10 197 welding die, 22 087 welding equipment, 10 054 welding force, 21 029 welding glass, 10 043 welding gloves, 10 178 welding goggles , 10 174 welding gun, 32 048 welding head, 32 032 welding load: deprecated, 21 029 welding operator, 10 004 welding parameters, 10 147 welding plant, 10 005 welding position, 31 053 welding pressure, 21 034 welding pressure head, 22 188 welding pressure time, 22 166 welding primer, 10 052 welding procedure , 10 028 welding procedure qualification record, WPQR, 10 071 welding procedure requirements, 31 100 welding procedure specification, WPS, 10 070 welding procedure test , 10 108 welding process, 10 006 welding rectifier, 10 199, 32 041 welding rod: deprecated, 10 016
BRITISH STANDARD
(welding) sequence, 10 030 welding sequence schedule, 10 148 welding spectacles, 10 173 welding speed, 27 024, 31 081 welding technique , 10 027 welding time, 10 149 welding time, 24 009 welding variable, 10 073 welding wire, 10 015 welding with pressure, 21 001 weld-through sealer, 22 190
BS 499-1:2009
wheel guide, 71 034 width of preparation, 31 134 width of prepared face, 31 135 wire feed nozzle, 31 084 wire feed rate, 32 060 wire guide, 31 084 woodpecker welding: deprecated, 22 073 work instruction, 10 118 working distance, 34 009 workpiece width, 10 120
wormhole, 60 035 x-direction, 27 004 x-force, 27 023 y-direction, 27 005 y-force, 27 022 z-direction, 27 003 z-force, 27 021 zero current pause, 32 137
BSI 2008
.
141
BS 499-1:2009
142
.
BSI 2008
BRITISH STANDARD
This page deliberately left blank
British Standards Institution (BSI) BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.
Revisions
Information on standards
British Standards are updated by amendment or revision. s of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400 BSI offers an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.
BSI provides a wide range of information on national, European and international standards through its Library. Various BSI electronic information services are also available which give details on all its products and services. the Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: [email protected] Information regarding online access to British Standards via British Standards Online can be found at www.bsigroup.com/BSOL Further information about BSI is available on the BSI website at www.bsigroup.com
Buying standards Orders for all BSI, international and foreign standards publications should be addressed to BSI Customer Services. Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: [email protected] You may also buy directly using a debit/credit card from the BSI Shop on the website www.bsigroup.com/shop In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.
Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070 Email: [email protected]
BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 www.bsigroup.com/standards
raising standards worldwide™
BSI British Standards Welding and symbols Part 1: Glossary for welding, brazing and thermal cutting
NO NO COPYING COPYING WITHOUT WITHOUT BSI BSI PERMISSION PERMISSION EXCEPT EXCEPT AS AS PERMITTED PERMITTED BY BY COPYRIGHT COPYRIGHT LAW LAW
raising standards worldwide™™
BRITISH STANDARD
BS 499-1:2009 Publishing and copyright information
The BSI copyright notice displayed in this document indicates when the document was last issued © BSI 2008 ISBN 978 0 580 58471 8 ICS 01.040.25; 25.160.01 The following BSI references relate to the work on this standard: Committee reference WEE/1 Draft for comment 08/30162761 DC
Publication history First published August 1933 Second edition June 1939 Third edition October 1952 Fourth edition October 1965 Fifth edition November 1983 Sixth edition February 1991 Seventh edition December 2008
Amendments issued since publication Date
Text affected
BRITISH STANDARD
BS 499-1:2009
Contents Foreword 1
v
Scope
1
Section 1. common to more than one section
2
Section 2. relating to welding with pressure 19 Subsection 21. relating to more than one subsection 19 Subsection 22. relating only to resistance welding 28 Subsection 23. relating only to friction welding 47 Subsection 24. relating only to pressure welding 48 Subsection 25. relating only to diffusion welding 48 Subsection 26. relating only to explosive welding 49 Subsection 27. relating only to friction stir welding 49 Section 3. relating to fusion welding (welding without pressure) 57 Subsection 31. relating to more than one subsection 57 Subsection 32. relating only to arc welding 87 Subsection 33. relating only to gas welding 98 Subsection 34. relating only to electron beam welding 103 Subsection 35. relating only to light radiation welding 106 Subsection 36. relating only to aluminothermic welding 107 Subsection 37. relating only to electro-slag welding 109 Section 4. relating to braze welding and brazing 110 Subsection 40. relating only to braze welding 110 Subsection 41. relating only to brazing 111 Section 5. relating to testing
113
Section 6. relating to weld imperfections
118
Section 7. relating to cutting 123 Subsection 70. relating to more than one subsection 123 Subsection 71. relating only to oxygen cutting 126 Subsection 72. relating only to arc cutting 128 Subsection 73. relating only to spark erosion cutting 128 Subsection 74. relating only to electron beam cutting 129 Subsection 75. relating only to laser cutting 129 Section 8. relating to health and safety Bibliography Index
130
131
133
List of figures Figure 1 – Chart of derivation of welding processes vi Figure 2 – Chart of derivation of brazing processes vii Figure 3 – Chart of derivation of thermal cutting processes vii Figure 4 – Root, fusion penetration, weld junction and zones of typical welds 3 Figure 5 – Preparation for square butt weld 7 Figure 6 – Preparation for butt weld between plates with raised edges 7 Figure 7 – Preparation for single bevel butt weld with backing 9 Figure 8 – Configuration for double-covered lap t 10 Figure 9 – Configuration for single lapped t 11 Figure 10 – Preparation for single V-butt weld 12 Figure 11 – Oxy-fuel gas pressure welding 20
BSI 2008
.
i
BS 499-1:2009
BRITISH STANDARD
Figure 12 – Examples of series spot welding 22 Figure 13 – Forms of projection welds 25 Figure 14 – Typical example of weld made using pressure – Double row of staggered, spaced spot welds 26 Figure 15 – Typical example of weld made using pressure – Projection weld 26 Figure 16 – Foil butt-seam weld 27 Figure 17 – Weld nugget 28 Figure 18 – Typical example of weld made using pressure – Resistance spot welds 28 Figure 19 – Typical example of weld made using pressure – Seam weld 29 Figure 20 – Mash weld 29 Figure 21 – Nail head welding 30 Figure 22 – Vertical centre electrode 31 Figure 23 – Vertical offset electrode 31 Figure 24 – Angle offset electrode 32 Figure 25 – Cranked offset electrode 32 Figure 26 – Time and pressure diagram for simple spot, stitch, or projection welding 35 Figure 27 – Time and pressure diagram for pulsation spot or projection welding 35 Figure 28 – Time and pressure diagram for spot or projection welding, programme control 36 Figure 29 – Time and pressure diagram for pulsation spot or projection welding, programme control 36 Figure 30 – Time and pressure diagram for spot welding, programme control with dual-pressure cycle 30 Figure 31 – Time and pressure diagram for seam welding 30 Figure 32 – Time and pressure diagram for step-by-step seam welding 38 Figure 33 – Time and pressure diagram for roller spot welding 38 Figure 34 – Time and pressure diagram for step-by-step roller spot welding 39 Figure 35 – Time and platen movement diagram for straight flash welding 39 Figure 36 – Generalized diagram of speed, applied force, axial movement and time for continuous drive friction welding 40 Figure 37 – Generalized diagram of speed, applied force and axial movement with time for stored energy friction welding 42 Figure 38 – Angle centre electrode 45 Figure 39 – Swan-necked electrode 45 Figure 40 – Basic principle of friction stir welding 50 Figure 41 – Macrosection of a butt weld showing incomplete penetration 50 Figure 42 – Heel and heel plunge depth 51 Figure 43 – Adjustable probe tool 51 Figure 44 – Fixed bobbin tool 52 Figure 45 – Self-reacting bobbin tool 52 Figure 46 – Cross-section of a friction stir weld 54 Figure 47 – Tool shoulder footprint visible at the exit hole 54 Figure 48 – Cross-section of friction stir lap weld showing undesirable/ extreme plate thinning on the retreating side and a hook feature on the advancing side of the weld 56 Figure 49 – Example of back-step sequence 57 Figure 50 –Sketches of types of ts, types of weld(s) and weld preparations 58 ii
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Figure 51 – Gap, root face, root radius, land, included angle and angle of bevel for typical weld preparations 64 Figure 52 – Examples of toes, legs, weld widths and fusion faces 66 Figure 53 – Actual, effective, design and maximum throat thickness of typical welds 67 Figure 54 – Examples of excess weld metal 68 Figure 55 – Welding positions: slope (S) 70 Figure 56 – Schematic diagram of main welding positions 70 Figure 57 – Simplified view of main welding positions 71 Figure 58 – Comparison of UK (USA) and ISO welding positions 71 Figure 59 – Weld preparation using a fusible insert 73 Figure 60 – Typical example of butt weld – General view of butt weld 75 Figure 61 – Preparation for double-bevel T-butt welds 76 Figure 62 – Typical example of multi-run fusion weld – Double V-butt weld 77 Figure 63 – Preparation for fillet weld (T-t) 77 Figure 64 – Typical examples of multi-run fusion welds 79 Figure 65 – Preparation for single U-butt weld 80 Figure 66 – Typical example of fusion weld – Single V-butt weld 81 Figure 67 – Typical example of fusion weld – Fillet weld 82 Figure 68 – Weave technique 84 Figure 69 – Example of skip sequence 84 Figure 70 – Examples of block sequences 85 Figure 71 – Roots of typical weld preparations 86 Figure 72 – Penetration bead 86 Figure 73 – Self-shielded tubular-cored arc welding 92 Figure 74 – Surge reignition 94 Figure 75 – Types of rectification 95 Figure 76 – Neutral oxy-acetylene flame 98 Figure 77 – Carburizing oxy-acetylene flame 99 Figure 78 – Carburizing oxy-acetylene flame for a hard surfacing application 99 Figure 79 – Oxidizing oxy-acetylene flame 99 Figure 80 – Leftward welding 99 Figure 81 – Rightward welding 99 Figure 82 – All-position rightward welding 102 Figure 83 – Diagrammatic representation of a diode gun 104 Figure 84 – Diagrammatic representation of a triode gun 104 Figure 85 – Diagrammatic representation of a back-bombarded gun 105 Figure 86 – Basic equipment for aluminothermic welding 108 Figure 87 – Electro-slag welding 109 Figure 88 – Bell butt t 110 Figure 89 – Diminishing bell butt t 110 Figure 90 – Short bell branch t 111 Figure 91 – U-tensile test specimen 115 Figure 92 – Cruciform test pieces 115 Figure 93 – Method of obtaining cruciform test specimen 116 Figure 94 – Tongue-bend test specimen 116 Figure 95 – Shear test piece 117 Figure 96 – Incompletely filled groove 118 Figure 97 – Undercut 118 Figure 98 – Lack of sidewall fusion 119 Figure 99 – Lack of root fusion 119 Figure 100 – Lack of inter-run fusion 119 Figure 101 – Incomplete root penetration 119 BSI 2008
.
iii
BS 499-1:2009
BRITISH STANDARD
Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure
102 103 104 105 106 107 108 109 110 111
– – – – – – – – – –
Excess penetration bead 121 Root concavity 121 Shrinkage groove 121 Drag 124 Single-cantilever cutting machine 125 Double-cantilever cutting machine 125 Extended boom single-cantilever cutting machine Portal cutting machine 125 Double-portal cutting machine 126 Portal-cantilever cutting machine 126
List of tables Table 1 – and symbols for main welding positions
125
69
Summary of pages This document comprises a front cover, an inside front cover, pages i to viii, pages 1 to 142, an inside back cover and a back cover. iv
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Foreword Publishing information This part of BS 499 is published by BSI and came into effect on 31 December 2008. It was prepared by Technical Committee WEE/1, Definition and symbols for welding. A list of organizations represented on this committee can be obtained on request to its secretary.
Supersession This part of BS 499 supersedes BS 499-1:1991, which is withdrawn.
Relationship with other publications This standard has been aligned, as far is as practicable, with existing European and international lists of and definitions for welding, including BS EN 1792:2003, PD CEN/TR 14599, BS ISO 857 (all parts) and BS EN 13622. There might not be full agreement with standards that have not been adopted as British Standards. Where it was felt that an existing definition needed clarification, this has been done while striving to not contradict the existing definition. As far as practicable, the numbering system used in this standard follows that of BS EN 1792:2003 with new numbers allocated to that are not in the European standard. Where definitions are based on those in a European or international standard, the identifier of the original standard is given in square brackets after the definition. BS 499 is published in two parts, with a supplement to this part: *
Part 1: Glossary for welding, brazing and thermal cutting
*
Part 1, Supplement: Definitions for electric welding equipment
*
Part 2c: European arc welding symbols in chart form
NOTE 1 BS 499-1, Supplement is a reproduction of IEV 50 (851):1991. NOTE 2 BS 499-2c is based on BS EN 22553.
Information about this document This is a full revision of the standard, and introduces the following principal changes: Charts showing the derivation of welding, cutting and allied processes are given in Figure 1, Figure 2 and Figure 3. Commonly used friction stir welding are included in the new Section 27.
Contractual and legal considerations This publication does not purport to include all the necessary provisions of a contract. s are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.
BSI 2008
.
v
BS 499-1:2009
vi
.
BSI 2008
BRITISH STANDARD
BRITISH STANDARD
BS 499-1:2009
BSI 2008
.
vii
BS 499-1:2009
viii
.
BSI 2008
BRITISH STANDARD
This page deliberately left blank.
BRITISH STANDARD
BS 499-1:2009
1 Scope This standard provides , symbols and definitions for welding, brazing and thermal cutting of metals. Some definitions might also apply to non-metals. It does not cover mechanically fastened or adhesive bonded ts. This standard is intended for designers, those drafting welding specifications, welding production, manufacturers and inspection personnel. Preferred and equivalent are given in bold type. Non-preferred are given in medium type. Deprecated are indicated as such.
BSI 2008
.
1
BS 499-1:2009
BRITISH STANDARD
Section 1. common to more than one section No.
Term
Definition
10 001
welding
ing process in which two or more parts are united producing a continuity in the nature of the workpiece material(s) by means of heat or pressure or both, and with or without the use of filler material
10 002
weld
union of pieces of material resulting from welding
10 003
welder
operator who performs or controls the welding process
10 004
welding operator
person who controls fully mechanized or automatic fusion welding processes
10 005
welding plant welder: deprecated
apparatus for providing and controlling energy, and movement if necessary, for making a weld
10 006
welding process
particular method of welding involving the application of certain metallurgical, electrical, physical or mechanical principles
10 007
manual welding
welding where the electrode holder, welding hand gun, torch or blowpipe is manipulated by hand
10 008
partly mechanized welding
manual welding where the wire feed is mechanized
10 010
mechanized welding
welding in which the welding parameters are maintained within a suitable tolerance by mechanical or electronic means and which may be manually varied during the welding process to create the required welding conditions
10 011
automatic welding
welding in which all operations are preset and performed automatically during the process
10 012
strength weld
weld designed to withstand stress
10 013
parent metal base metal: deprecated
metal to be ed or surfaced by welding, braze welding or brazing (See Figure 4.)
10 014
filler metal
welding consumable added during welding to form the weld
10 015
filler wire welding wire
filler material in the form of a wire which may or may not be a part of the welding circuit
10 016
filler rod welding rod: deprecated
filler material in the form of a rod which may or may not be a part of the welding circuit
10 017
flux
material used during welding, brazing or braze welding to clean the surfaces of the t chemically, to prevent atmospheric oxidation and to reduce impurities NOTE In arc welding, many other substances, which perform special functions, are added.
10 018
deposited metal
filler metal that has been added during welding
10 020
weld metal
all metal melted during the making of a weld and retained in the weld (See Figure 4.)
10 021
run
metal melted or deposited during one age of an electrode, or torch or blowpipe
2
.
BSI 2008
BRITISH STANDARD
Figure 4
BS 499-1:2009
Root, fusion penetration, weld junction and zones of typical welds
1 4
3
2
5
8
6
7
Key 1 Weld zone 2 Heat-affected zone 3 Weld metal 4 Parent metal 5 Fusion penetration 6 Weld junction 7 Root (of weld) 8 Fusion zone
No.
Term
Definition
10 022
deposition rate
mass of filler metal consumed per unit of productive welding time
10 023
weld zone
zone containing the weld metal and the heat-affected zone (See Figure 4.)
10 024
heat-affected zone HAZ
portion of non-melted parent metal whose microstructure has been affected (See Figure 4.)
10 025
fusion zone
part of the parent metal that is melted into the weld metal, as determined on the cross-section of a weld (See Figure 4.)
10 026
fusion line
interface between the weld metal and the non-melted parent metal as determined on the cross-section of a fusion weld
10 027
welding technique
manner in which an operator manipulates an electrode, a blowpipe or a similar appliance
10 028
welding procedure
specific course of action followed in welding, including a list of materials and, where necessary, tools to be used (See Annex A to Annex G.)
10 030
(welding) sequence
order and direction in which ts, welds or runs are made
10 031
weld run sequence
order in which the runs of a weld or deposited layer are produced
10 032
stud welding
ing of a metal stud or similar part to a workpiece NOTE Welding may be accomplished by arc, resistance, friction or other suitable process, with or without external gas shielding. The weld is made over the whole end area of the stud or attachment.
10 033
hard facing hard surfacing
application of a hard, wear-resistant material to the surface of a component by welding, braze welding or spraying
10 034
spatter
globules of metal expelled during welding or cutting
BSI 2008
.
3
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 035
duty cycle
1) In the sense of ‘‘welding operator’’ duty cycle, ratio of time spent welding to the total time which includes other activities, e.g. changing electrodes, slag removal 2) In the sense of ‘‘machine’’ duty cycle, measure of the capability of the welding equipment
10 036
transferred arc
arc established between the electrode of the plasma arc torch and the workpiece
10 037
non-transferred arc
arc established between the electrode and the constricting nozzle of the plasma arc torch or thermal spraying gun NOTE The workpiece does not form part of the electrical circuit.
10 038
electrode pick-up
contamination of a non-consumable electrode by metal or scale from the surface of the workpiece
10 040
pick-up
1) In fusion welding, transfer of alloying elements from the parent metal to the weld metal as a result of dilution 2) In resistance welding, particles of the surface of the workpiece that adhere to the surface of the electrodes, or vice versa
10 041
arc eye
irritation of the eye caused by exposure to radiation from an electric arc
10 042
electrode holder
device to hold an electrode and to convey current to it NOTE 1 In resistance welding, this is device holding a spot welding electrode. NOTE 2 In arc welding, this is a tool for clamping, guiding and connecting a covered electrode to the welding circuit while insulating the operator from the welding
10 043
welding glass filter glass
special filter that provides protection against glare when welding and in addition reduces the UV radiation and IR radiation that is dangerous to the human eye
10 044
heat filter
colourless, transparent, heat-absorbing glass plate placed between the plain glass and the welding glass to protect the eyes NOTE It is usually used in high current metal inert-gas welding.
10 045
blowpipe torch: deprecated
device for mixing and burning gases to produce a flame for welding, brazing, braze welding, cutting, heating and similar operations (See also 32 142 to 32 144.)
10 046
flashback
retrogression of the flame beyond the blowpipe body into the hose, with possible subsequent explosion
10 047
pressure regulator gas regulator
device for attachment to a gas cylinder or pipeline for reducing and regulating the gas pressure to the working pressure required
10 048
residual welding stress
stress remaining in a metal part or structure as a result of welding
10 050
pulse
unidirectional flow of current of either polarity of brief duration
10 051
pulse time
duration of a pulse
4
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 052
welding primer weldable primer: deprecated
paint that is applied to a shot-blasted metal surface for protective purposes, which does not have to be removed prior to welding and does not prevent the making of a satisfactory weld
10 053
welding consumables
all materials, such as filler materials, gas, flux or paste, used up during welding and enabling or facilitating the formation of a weld
10 054
welding equipment
basic apparatus used in welding such as power source, as well as wire feeder and powder feeder, etc.
10 055
welding accessories
all items of welding equipment associated with welding, other than welding plant and welding consumables
10 056
layer
stratum of weld metal consisting of one or more runs, side by side
10 057
building-up
overlay welding to obtain or restore required dimensions
10 058
surfacing
producing a layer of metal, by welding, on a workpiece to obtain desired properties or dimensions
10 060
t preparation weld preparation
preparation for making a connection where the individual components, suitably prepared and assembled, are ed by welding or brazing
10 061
t
junction of workpieces or the edges of workpieces that are to be ed or have been ed
10 063
air gap gap
1) In fusion welding, minimum distance at any cross-section between edges, ends or surfaces to be ed 2) In magnetically-impelled arc butt welding, space between component surfaces across which the arc is maintained during the heating (arcing) period
10 064
heat input
heat introduced into the t during welding, referred to a characteristic dimension, such as a bead or weld length, weld cross-section, weld spot diameter
10 066
acceptance criteria
specified quality criteria for defining conformance of a weld
10 067
acceptance level
specific set of acceptance criteria where more than one set can be selected
10 068
examiner
person who has been appointed to compliance with the applicable standard NOTE In certain cases, an external independent examiner can be required.
10 069
examining body
organization that has been appointed to compliance with the applicable standard NOTE In certain cases, an external independent examining body can be required.
10 070
welding procedure specification WPS
document that has been qualified and provides the required variables of the welding procedure to ensure repeatability during production welding
10 071
welding procedure qualification record WPQR
record comprising all necessary data needed for qualification of a preliminary welding procedure specification
10 073
welding variable
variable which influences the characteristics of the welded t BSI 2008
.
5
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 074
essential variable
welding condition that requires qualification
10 075
additional variable non-essential variable
welding condition addressed in the welding procedure specification but not requiring qualification
10 076
standard material
material produced and delivered in accordance with a standard or specification
10 080
re-start
point on the run where the welding is or was re-started
10 081
post-weld heat treatment
application of heat to an assembly after welding, brazing, soldering, thermal spraying or cutting
10 082
plasma gas
ionized gas that generally forms the major portion of an arc column and provides a conducting path for the current
10 083
preheat
heating of an appropriate area of a workpiece before welding, normally to achieve the preheating temperature
10 084
cooling rate
rate of decrease of temperature with time over a specified temperature range or time
10 085
heating rate
rate of increase of temperature with time over a specified temperature range or time
10 088
dissimilar material t
welded t in which the parent materials have significant differences in mechanical properties and/or chemical composition
10 089
as welded
pertaining to the condition of weld metal, welded ts, and weldments after welding, but prior to any subsequent thermal, mechanical, or chemical treatments NOTE For alloys that may undergo natural ageing (e.g. some aluminium alloys) the as-welded condition lasts only for a limited period of time.
10 090
auxiliary material
welding consumable used during welding, generally not forming part of the finished weld
10 091
quality level
description of the qualities of a weld on the basis of type, size and amount of selected imperfections
10 092
fitness-for-purpose
ability of a product, process or service to serve a defined purpose under specific conditions
10 093
side edge of workpiece
edge of workpiece, transverse to weld surface (see Figure 5, item 2) NOTE Illustration from BS EN ISO 17659.
6
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Figure 5
Preparation for square butt weld
4
8
5
2
7
1 6
3 Key 1 Plate thickness 2 Side edge of workpiece 3 Gap 4 t length
Figure 6
5 6 7 8
Upper workpiece surface Reverse side Plate edge Fusion face (unprepared)
Preparation for butt weld between plates with raised edges
7 4
2
3
5 6 Key 1 Plate thickness 2 Length of raised edge 3 Longitudinal side of raised edge 4 Abutment of raised edge
1 5 6 7
Depth of raised edge Radius of raised edge Fusion face (unprepared)
BSI 2008
.
7
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 094
abutment of raised edge
surface of a raised-edge t (see Figure 6, item 4) NOTE Illustration from BS EN ISO 17659.
10 095
homogeneous t
welded t in which the weld metal and parent material have no significant differences in mechanical properties and/ or chemical composition NOTE A welded t made of similar parent materials without filler metal is considered homogeneous.
10 097
plate edge
edge of a plate, normal to the t axis (see Figure 5, item 7) NOTE Illustration from BS EN ISO 17659.
10 098
manufacturing organization
workshop or site or both which is/are under the same technical and quality management
10 099
welding co-ordinator
qualified person who has responsibilities in the manufacturing operation for carrying out one or more coordination tasks for welding or welding related matters, e.g. planning, controlling, supervising, monitoring, and whose competence and knowledge has been demonstrated by training, education and/or relevant manufacturing experience
10 100
high pressure blowpipe
blowpipe in which the pressure of both the fuel gas and the oxygen/compressed air, measured immediately before the point of mixing, is higher than the pressure of the mixture, measured between point of mixing and welding nozzle
10 101
low pressure blowpipe
blowpipe in which the fuel gas pressure, measured immediately before the mixing chamber, is lower than the pressure of the gas mixture, measured between the mixing chamber and welding nozzle
10 102
edge distance
distance between the centre of a weld and the nearest edge of the workpiece
10 103
range of qualification
extent of qualification for an essential welding variable
10 104
batch sample
one or more units of product selected at random from the batch and considered to be representative of the batch
10 105
plate thickness
See Figures 5, 6, 7, 8, 9, and 10. NOTE Illustrations from BS EN ISO 17659.
10 106
nominal thickness
specified thickness, excluding any permitted tolerances
10 108
welding procedure test
making and testing of a representative welded t, in order to prove the feasibility of a welding procedure NOTE 1 This term is not usually applied to any tests that may have been made during the development of a welding procedure. NOTE 2 Sometimes an additional t of a different type is welded in order to obtain relevant test data.
10 109
function test
test of a welding unit set-up in accordance with a welding procedure specification (WPS)
10 110
production test
welding test carried out in the production environment on the welding unit, on actual products or on simplified test pieces, during an interruption of normal production
10 111
pre-production welding test
welding test having the same function as a welding procedure test, but based on a non-standard test piece representative of the production conditions
8
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 112
production sample testing
testing of actual welded products sampled from a continuous production
10 113
manufacturer’s previous welding experience
practice authenticated by test data demonstrating that established production welding procedures have been capable of consistently producing welds of acceptable quality over a period of time
10 114
upper workpiece surface
normally the side of the t accessible for the commencement of welding (see Figure 5, item 5, and Figure 7, item 5). NOTE Illustrations from BS EN ISO 17659.
10 115
reverse side
side of the t opposite to the upper workpiece surface (see Figure 5, item 6, and Figure 7, item 6). NOTE Illustrations from BS EN ISO 17659.
Figure 7
Preparation for single bevel butt weld with backing
4
8
7
5
1
6
3 10
9 2 Key 1 Plate thickness 2 Root gap 3 Depth of root face 4 Included angle 5 Upper workpiece surface
6 7 8 9 10
Reverse side Fusion face (unprepared) Fusion face (prepared) Root face Weld pool backing
BSI 2008
.
9
BS 499-1:2009
Figure 8
BRITISH STANDARD
Configuration for double-covered lap t
2 1 Key 1 Plate thickness
2
Workpiece width
No.
Term
Definition
10 116
slope
in welding geometry, angle between the root line and the positive x-axis of the horizontal reference plane in straight welds
10 117
ferrite number
arbitrary number indicating magnetic attraction relative to a series of reference samples and therefore proportional to the ferro-magnetic phase content
10 118
work instruction
simplified specification of the welding procedure, suitable for direct application in the workshop
10 119
weld interface
area after the welding force is applied
10 120
workpiece width
width of the workpiece, parallel to the weld surface (see Figure 8, item 2) NOTE Illustration from BS EN ISO 17659.
10 121
lap width
dimension of overlap, transverse to the t line (see Figure 9, item 4) NOTE Illustration from BS EN ISO 17659.
10 122
weld length
overall length of continuous deposited weld metal in a t NOTE Illustration from BS EN ISO 17659.
10
.
BSI 2008
BRITISH STANDARD
Figure 9
BS 499-1:2009
Configuration for single lapped t
3
2 5 1
4 Key 1 Plate thickness 2 Side of lap face 3 Lap length
4 5
Lap width Lapped area
BSI 2008
.
11
BS 499-1:2009
Figure 10
BRITISH STANDARD
Preparation for single V-butt weld
12
8 11 7
13
1 2 5 9
10 3 Key 1 Plate thickness 2 Root gap 3 Depth of root face 4 Side edge of root face
5 6 7 8
14
6
Side edge of preparation Width of preparation Angle of bevel Depth of preparation
4 9 10 11 12
Width of prepared face Included angle Fusion face (prepared) Root face
No.
Term
Definition
10 123
lap length
length of lap, parallel to the t line (see Figure 9, item 3) NOTE Illustration from BS EN ISO 17659.
10 124
t length
dimension of t in the direction of the weld axis (see Figure 5, item 4, Figure 63, item 3, and Figure 65, item 2) NOTE Illustrations from BS EN ISO 17659.
10 125
batch
collection of one or more units of products, made in a single production run
10 126
parent material
material to be ed, or surfaced, by welding, braze welding or brazing
10 127
contracting parties
parties who have entered into a supply contract
12
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 128
welding co-ordination personnel
personnel who have responsibilities in the manufacturing operation for welding and welding related activities whose competence and knowledge have been demonstrated by, e.g. training, education and/or relevant manufacturing experience
10 129
corrosion resistant surfacing
adherent material for protection of a surface against corrosion
10 130
heat resistant surfacing
adherent material for protection of a surface against heat
10 131
overlap
in a lap t, minimum distance between the edges of overlap plates in beam welding, portion of the weld remelted prior to the slope down in seam welding, area in the preceding weld remelted by the succeeding weld
10 132
rotation
in welding geometry, angle between the centreline of a weld and the positive y-axis or a line parallel to the y-axis, measured in the counter-clockwise direction in the plane of the transverse cross-section of the weld
10 133
production welding
welding carried out during manufacture before final delivery to the end
10 134
robotic welding
automatic welding using a robot that can be preprogrammed to different welding paths and fabrication geometries
10 135
fully mechanized welding
welding where all the main operations (excluding the handling of the workpiece) are mechanized NOTE Manual adjustment of welding variables during welding is possible.
10 136
lapped area
area of overlapped material in a lapped t (see Figure 9, item 5) NOTE Illustration from BS EN ISO 17659.
10 137
preheat maintenance temperature
minimum temperature in the weld zone which shall be maintained if welding is interrupted
10 138
preheating temperature
temperature immediately prior to the commencement of welding resulting from the heating of the parent metal in the region of the weld
10 140
finishing welding
welding carried out in order to remove casting defects and core openings to ensure the agreed quality of castings
10 142
t welding
production welding used to components together
10 143
qualified person
person whose competence and knowledge have been obtained by education, training and/or relevant experience NOTE In order to demonstrate the level of competence and knowledge a qualification test may be required.
10 144
heterogeneous t
welded t in which the weld metal and parent material have significant differences in mechanical properties and/or chemical composition
10 145
productive welding time
time during which the welding operation takes place
10 146
welding conditions
conditions under which welds are made; these include environmental factors (e.g. weather), stress and ergonomic factors (e.g. noise, heat, cramped working conditions) and workpiece-related factors (e.g. parent metal, groove shape, working position)
BSI 2008
.
13
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 147
welding parameters
information needed for the performance of welding with a specified welding procedure NOTE Welding parameters are, e.g. welding consumables, parent material, t preparation, welding current, welding voltage, travel speed, preheating, working and inter temperature and run sequence.
10 148
welding sequence schedule
schedule specifying the order and direction in which welds are to be made on a workpiece
10 149
welding time
time required for making a weld (excluding preparatory or finishing operations) NOTE It consists of productive welding time and the servicing time.
10 150
t efficiency
ratio of strength of a t to the strength of the parent metal, expressed as a percentage
10 151
faying surface interface: deprecated
1) surface of one component that is intended to be in with a surface of another component to form a t 2) in friction welding, area developed between the workpieces after completion of the welding operation
10 152
stud
fastener to be attached by stud welding
10 153
protrusion
in stud welding, distance between the tip of the stud and the face of the device in their initial position
10 154
lift
in stud welding, distance between the stud tip and the workpiece surface with the stud-lifting mechanism in position and activated
10 155
semi-automatic welding partly mechanized welding
welding in which some of the welding parameters, such as arc length, are automatically controlled, but manual guidance is necessary
10 156
shop weld
weld made within the premises of the manufacturer of the welded assembly
10 157
site weld
weld made at the location where the assembly is to be installed
10 158
covered filler rod coated filler rod: deprecated
filler rod having a covering of flux
10 159
fusion boundary weld junction fusion line
boundary between the fusion zone and the heat-affected zone (See Figure 4.)
10 160
approved welding procedure documented welding procedure that has been approved by such means as an inspecting authority either by means of a welding procedure test or authentic documented experience gained with the welding of ts similar to that to which the welding procedure applies, or other approved methods
10 161
three-phase welding power welding power source in which power is taken from all three source phases of a three-phase supply to provide a single welding three-phase welding machine current or three single-phase welding currents
10 162
idling time
14
.
BSI 2008
time during which energy is available for welding but is not being used
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 163
recovery time
time required, after a change of conditions has occurred in a welding circuit, for either the current or the voltage, or both, to recover to a specific percentage of their value before the change
10 164
cycle
arbitrary unit of time, of duration equal to that of one cycle of the alternating current supply NOTE Normally in the UK this is 1/50 s
10 165
nozzle-constricted arc
arc that is constricted or shaped by the nozzle walls
10 166
vortex-constricted arc
arc that is constricted by a vortex produced by swirling liquid or gas
10 167
transferred arc
constricted arc that is struck between an electrode mounted within a torch and the workpiece
10 168
non-transferred arc
constricted arc that is struck between an electrode within a torch and a second electrode which forms a nozzle through which the plasma flows
10 169
partially transferred arc
constricted arc formed when the workpiece is connected to one terminal of the power supply and the other terminal is connected to an electrode within the torch; the torch nozzle also forms part of the electrical circuit and is at an intermediate potential
10 170
sleeve t
t where the ends of two pipes or round bars fit into a short length of pipe, the inside diameter of which approximates to the outside diameter of the two other
10 171
fixed shield
independently mounted device to provide protection from injury during welding or cutting
10 172
plain glass cover glass
clear glass or other transparent material used to protect the surface of welding glass from spatter
10 173
welding spectacles
spectacles fitted with welding glass, normally issued to persons whose duties require them to work in the vicinity of welding or cutting operations
10 174
welding goggles
protective device enclosing a space in front of the eyes to shield them from injury during welding or cutting, fitted with welding glass and plain glass
10 175
chipping goggles
protective device enclosing a space in front of the eyes to shield them from injury during chipping, grinding or cutting, fitted with plain glass
10 176
face mask
1) protective device worn in front of the face to shield it from injury during welding or cutting, fitted with welding glass and plain glass 2) protective device supplied with fresh air and worn over the nose and mouth
10 177
helmet head screen head shield
protective device ed on the head and arranged to shield the face and throat from injury during welding, fitted with a window consisting of welding glass and plain glass, and if necessary a heat filter
10 178
welding gloves
gloves to protect the hands, or gauntlets to protect the hands and forearms, from heat and metal splashes due to welding or cutting BSI 2008
.
15
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 179
open injector-mixer bunsen-type mixer
injector-mixer where the additional gas is drawn in from the atmosphere
10 180
closed injector- mixer
injector-mixer that is closed to the atmosphere, the entrained gas being drawn up through a tube connected to the unit
10 181
cone
more luminous part of a flame, which is adjacent to the nozzle orifice
10 182
feather
carbon-rich zone, visible in a flame, extending around and beyond the cone when there is an excess of carbonaceous gas
10 183
gas envelope
gas surrounding the inner cone of an oxy-fuel gas flame
10 184
threaded hose connection
threaded part (inlet or outlet) of a welding or cutting appliance to which a fitted hose is coupled NOTE Threaded hose connections, hose coupling nuts and hose couplers have right-hand threads for non-combustible gases and left-hand threads for combustible gases. Hose coupling nuts and hose couplers having left-hand threads are notched.
10 185
hose coupling nut union nut: deprecated
nut used for securing the hose coupling nipple to a threaded hose connection or to a hose coupler (See note to term 10 184.)
10 186
hose coupling nipple
metal component, one end of which is inserted into a hose, the other end has a seating and a shoulder around which can be rotated the hose coupling nut (See note to term 10 184.)
10 187
fitted hose
length of hose at each end of which is a hose coupling nipple and a hose coupling nut
10 188
hose coupler
component, consisting of a hexagonal centre portion with threaded ends, for connecting two lengths of fitted hose (See note to term 10 184.)
10 189
flame snap-out
unintentional extinction of the flame outside the nozzle orifice
10 190
gas economizer
auxiliary device designed for temporarily cutting off the supply of gas to the welding equipment, except the supply to a pilot jet where fitted
10 191
two-stage regulator
gas regulator in which the gas pressure is reduced to the working pressure in two stages
10 192
manifold regulator multi-stage regulator
gas regulator in which the gas pressure is reduced to the working pressure in more than one stage
10 193
flame arrestor flashback arrester
safety device fitted in a fuel gas system to prevent any flashback reaching the fuel gas pipeline or supply
10 194
hydraulic back pressure valve water-charged non-return safety valve fitted in an acetylene gas system to prevent flashback or back pressure from the blowpipe reaching the acetylene generator
10 195
flame normalizing
normalizing carried out by direct flame heating
10 196
interpulse time
period of time between successive pulses during the making of a single weld
10 197
welding cycle welding cycle time
period required to complete a welding cycle
10 198
weld timer
device that controls only the weld time
16
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
10 199
welding rectifier welding convertor rectifier converter
device that converts single or multiphase power from the frequency of the power supply to unidirectional current
10 200
stored-energy welding
method of welding in which the welding energy is stored in an inductor, a capacitor, an electric accumulator or a flywheel during a period of time relatively long compared to the welding time
10 201
burnt weld
weld in which the weld metal has been grossly overheated causing excessive oxidizing thereby reducing the strength of the t
10 202
weldability
ease with which a material or materials can be welded to give an acceptable t
10 203
plasma arc
transferred arc in which a constriction (mechanical or magnetic) is used to produce a thin pencil-like configuration of plasma and electrons to give a high heat concentration over a small area
10 204
plasma jet
jet or plasma formed by a non-transferred arc and expelled through an orifice at high velocity by gas pressure
10 205
plasma weld surfacing
surfacing or cladding in which the heat is provided by a plasma arc that may be transferred or partially transferred to the workpiece NOTE The cladding material may be applied as powder or as filler wire that is fused to the parent metal.
10 206
nozzle tip: deprecated
generally detachable part of a blowpipe from which gas or gases emerge
10 207
blowpipe head
part of a blowpipe to which a nozzle is fitted
10 208
blowpipe shank
part of a blowpipe that is normally held or gripped, to which are fixed the valves and threaded hose connections
10 209
combined blowpipe combined outfit: deprecated combined set: deprecated
blowpipe that, when fitted with the appropriate attachments, can be used for welding, cutting, heating or flame cleaning
10 210
head mixing blowpipe
blowpipe with a mixer or injector-mixer in the head
10 211
harsh flame
flame in which the velocity of the gases is higher than normal
10 212
soft flame
flame in which the velocity of the gases is lower than normal
10 213
dissolved acetylene
acetylene made stable under pressure by being dissolved in a liquid, e.g. acetone
10 214
groove weld
weld in a preparation made to receive weld metal
10 215
roll welding
welding with pressure in which a force is progressively applied by mechanically operated rolls after heating by different means
10 216
robot
programmable, multi-function manipulator
10 217
manipulation
operation of grasping and moving an object
10 218
adaptive control system control system
control method in which control parameters are continuously and automatically adjusted in response to measured process variables to achieve the specified performance
BSI 2008
.
17
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
10 219
t recognition
form of adaptive control that recognizes variations in the geometry detects changes in the t geometry and instructs the welding machine to take the appropriate corrective action
10 220
weld recognition weld feature recognition
form of adaptive control that recognizes variations in the geometry (including penetration depth) of the weld or weld pool being made and instructs the welding machine to take the appropriate corrective action
10 221
t tracking seam tracking
form of adaptive control that monitors changes in the location of the t to be welded and instructs the welding machine to take the appropriate corrective action
10 222
forehand welding
welding technique in which the welding torch or gun is pointed in the direction of welding
10 223
backhand welding
welding technique in which the welding torch or gun is pointed towards the completed weld, i.e. opposite to the direction of welding
18
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Section 2. relating to welding with pressure Subsection 21. relating to more than one subsection No.
Term
Definition
21 001
welding with pressure
welding in which sufficient outer force is applied to cause more or less plastic deformation of both the faying surfaces, generally without the addition of filler metal NOTE Usually, but not necessarily, the faying surfaces are heated in order to permit or to facilitate unifying.
21 002
interface
area when the welding force is applied
21 003
HF induction welding
welding in which an alternating electric current of at least 10 kHz is induced in the work to produce heat which in association with a forging action produces a t
21 004
upset metal upset
parent metal proud of the normal surfaces of the work as a result of forging or pressing
21 005
upset allowance
length allowed for the total shortening of both components due to upsetting
21 006
upset speed
rate of movement of the moving workpiece during upsetting
21 007
welding cycle
succession of operations effected by the machine for the making of a weld and the return to the initial position
21 008
upset force1)
force producing or tending to produce upset metal
21 010
upset pressure
pressure (force per unit area) resulting from the upset force
21 011
total allowance
In pressure, resistance butt, flash or friction welding, the length allowed, in preparation for welding, for the total shortening of both components due to all the operations that are actually used in the making of a weld
21 012
upset length
total actual shortening of both components due to the forging action in the making of a weld
21 013
forging force forge force
1) force applied normal to the faying surfaces to complete the weld 2) In friction welding, force applied normal to the faying surfaces at the time when relative movement between the components is ceasing or has ceased
21 015
forging time forge time
duration of application of the forging force
21 016
dwell
in resistance welding, maintain the electrode force after the cessation of current
21 017
dwell time
in fusion welding, time during which the energy source pauses at any point in each oscillation
21 020
oxy-fuel gas pressure welding
welding with pressure in which the workpieces are heated at the faying surfaces by an oxy-fuel gas flame and the weld is made by applying a force without addition of filler metal; the assembly may be of the open or closed type NOTE This process is illustrated in Figure 11.
1)
Force is sometimes incorrectly referred to as pressure. See 21 013 to 21 020. BSI 2008
.
19
BS 499-1:2009
Figure 11
BRITISH STANDARD
Oxy-fuel gas pressure welding
3 4
2
5
1
a) Closed assembly Key 1 Upset 2 Weld 3 Welding blowpipe
b) Opened assembly
4 5
Gas flame Workpiece
No.
Term
Definition
21 021
ultrasonic welding
welding process in which mechanical vibrations of low amplitude superimposed on a static force, and usually at frequencies above the audible limit, make a weld between two surfaces to be ed at a temperature well below the melting point of the parent metal NOTE Additional heat may or may not be applied.
21 022
diffusion welding
welding with pressure whereby the workpieces are kept in under specified continual pressure and are heated either on their faying surfaces, or in their entirety at a defined temperature over a controlled time (accompanied by a figure) NOTE This results in local plastic deformation and thereby intimate of the surfaces and diffusion of the atoms through the interface. This produces complete continuity of the material. The operation may take place in a vacuum, under a gas shield or in a fluid, preferably without the addition of a filler metal.
21 023
explosive cladding
cladding by explosive welding (see 26 001)
21 024
magnetically-impelled arc butt welding
welding process in which the faying surfaces of the workpieces are heated by a short duration arc between them and then brought together by the application of a force, the arc being impelled along the t line by magnetic fields NOTE The arc current can be either constant or increased in steps.
21 025
20
.
upsetting
BSI 2008
1) operation of locally increasing the cross-sectional area of a workpiece by the application of a longitudinal force 2) final operation of butt or flash welding comprising the application of a force to the ends of the workpieces after heating to welding temperature
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
21 026
pressure area
initial surface area of the components through which force is transmitted
21 027
forward force2)
force applied to the movable head of a welding machine in the direction necessary to make a weld
21 028
initial force2)
first steady or peak force applied normal to the interface, during the welding cycle
21 029
welding force2) welding load: deprecated
force, at the abutting surfaces of a workpiece, used to make a weld
21 030
post-weld upset force2)
force required to reduce the workpiece to its correct length after welding
21 031
post-heating force2)
force applied by the electrodes to the work during the time post-heating current is flowing
21 032
forward pressure
pressure (force per unit area) resulting from the forward force
21 033
initial pressure
pressure (force per unit area) resulting from the initial force
21 034
welding pressure
pressure (force per unit area) resulting from the welding force
21 035
post-weld upset pressure
pressure (force per unit area) resulting from the post-weld upset force
21 036
post-heating pressure
pressure (force per unit area) resulting from the post-heating force
21 037
overhang
distance a component projects from the die or clamp in the direction of the mating component for resistance butt, flash, friction, pressure or magnetically impelled arc butt welding
21 038
digital timer
apparatus for controlling intervals of time by means of counting, to a preset number, pulses which have a constant rate of repetition
21 039
analogue timer
apparatus for controlling intervals of time that relies upon any time dependent physical change
21 040
sequence timer
apparatus comprising a group of timers for controlling various functions in a welding cycle in a predetermined sequence
21 041
total loss
In pressure, resistance butt, flash, friction or magnetically impelled arc butt welding, total amount of shortening of both components due to all the operations that are actually used in the making of a weld
21 042
forge welding fire welding
welding with pressure in which the workpieces are heated in air in a forge and the weld is made by applying blows or some other impulsive force sufficient to cause permanent deformation at the interfaces
2)
Force is sometimes incorrectly referred to as pressure. See 21 032 to 21 036. BSI 2008
.
21
BS 499-1:2009
BRITISH STANDARD
Subsection 22. relating only to resistance welding No.
Term
Definition
22 001
resistance welding
welding with pressure in which the heat necessary for welding is produced by resistance to an electrical current flowing through the welding zone
22 002
resistance butt welding slow butt welding: deprecated upset butt welding: deprecated
resistance welding in which the components are butted together under pressure, and current is allowed to flow until the temperature is reached at which upset metal is produced and the weld is completed
22 003
flash welding flash butt welding: deprecated
resistance welding during which heating is obtained when the workpieces are progressively and repeatedly advanced towards each other, causing the current to flow through localized points, thus creating flashing and expulsion of molten metal
22 004
spot welding
resistance welding in which a weld is produced at a spot in the work-piece between electrodes, the weld being of approximately the same area as the electrode tips, or as the smaller of tips of differing size; force is applied to the spot, usually through the electrodes, continuously throughout the process
22 005
stitch welding
spot welding in which successive welds overlap
22 006
multiple spot welding
spot welding in which, by the use of more than two electrodes, two or more welds are made simultaneously or in an automatically controlled sequence
22 007
series spot welding
spot welding in which two or more welds are made simultaneously in electrical series (See Figure 12.)
Figure 12
22
.
Examples of series spot welding
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 008
seam welding
resistance welding in which force is applied continuously and current continuously or intermittently to produce a linear weld, the workpiece being between two electrode wheels or between an electrode wheel and an electrode bar; the wheels apply the force and current and rotate continuously during the making of the linear weld
22 010
projection welding
resistance welding in which the force and current are localized by the use of a projection or projections raised on or formed from one or more of the faying surfaces, the projections collapsing during welding
22 011
resistance stud welding
stud welding using projection welding (See 10 032 and 22 010)
22 012
percussion welding
welding with pressure employing the heat from an arc produced by a rapid discharge of electrical energy; pressure is applied percussively during or immediately following the electrical discharge
22 013
HF resistance welding
resistance welding in which an alternating electric current of at least 10 kHz is fed through s to the work to provide the heat for welding; the high frequency current concentrates along adjacent surfaces to produce highly localized heat prior to the application of welding force
22 014
cross-wire weld
resistance weld at the point of between crossed wires or rods made with pressure applied continuously
22 015
resistance welding electrode electrode
replaceable portion of a resistance welding machine that transmits current and applies force to the pieces to be welded
22 016
electrode shank
portion of an electrode for spot or stitch welding intended to be held by, and to make electrical with, an electrode holder
22 017
electrode wheel
seam welding electrode in the form of a rotating disc
22 018
flashing allowance
length allowed for the total shortening of both components due to flashing, in preparation for flash welding
22 020
electrode pressure
pressure (force per unit of electrode area) resulting from the electrode force
22 021
flashing time3)
In flash welding, period of time between the start of continuous flashing and the time when the upset force is applied
22 022
upset time3)
22 023
upset current time 3)
duration of upset travel 3)
time during which upset current flows In pulsation and seam welding, period of time between two successive heat times in the same welding cycle
22 024
cool time off-time
22 025
weld time3)
In resistance welding, duration of continuous flow of welding current
22 026
hold time3) dwell time
period of time between the cessation of current in a welding cycle and the cessation of electrode force
22 027
welding current
current (excluding preheating current) used to bring the workpiece to, and maintain it at, welding temperature
3)
Attention is drawn to Figures 14 to 25 for diagrammatic representation of these . BSI 2008
.
23
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 028
flashing current
current flowing during flashing time
22 030
flashing travel
distance travelled by the moving head during flashing
22 031
flashing speed
rate of travel of the moving head during flashing
22 032
throat depth throat
in resistance welding, usable distance from the centre of the platens or the axes of the electrodes or, in the case of oblique electrodes, the point of intersection of the electrode axes in the working position or the line of electrode wheels and that part of the equipment body located closest to it
22 033
throat gap
1) in spot and seam welding equipment, usable distance between the arms or the outer current-conducting parts of the welding circuit 2) in projection welding equipment, clamping distance between the platens
22 034
indirect spot welding
spot welding in which only one electrode tip is used per weld; a backing electrode or the workpiece itself completes the electrical circuit and resists the force of the electrode tip
22 035
forge delay time
period of time between the start of weld time and the instant of application of maximum welding force
22 036
backing electrode
plate or strip of current-carrying material used in place of an electrode on one side of the work to reduce the marking for multi spot, seam or projection welds
22 037
upset current
current flowing during upsetting
22 038
flashing loss
In flash welding, total actual shortening of both components during the flashing time
22 040
flashing
in flash welding, phenomenon occurring as the components are progressively advanced towards each other, when the current, confined to localized points of , causes repeated expulsion of molten metal
22 041
double-conductor connection cable comprising two conductors providing an electrical link cable between the secondary terminals of a resistance welding transformer and the welding set, and designed to have as low an electrical resistance as possible
22 042
single-conductor connection cable
cable comprising one conductor providing an electrical link between the secondary terminals of a resistance welding transformer and the welding set
22 043
staggered resistance welds
generally spot welds in two or more rows, in a staggered pattern (see Figure 14)
22 044
projection diameter
maximum diameter of individual projection [See Figure 13a), item 4] NOTE Illustration from BS EN ISO 17659.
24
.
BSI 2008
BRITISH STANDARD
Figure 13
BS 499-1:2009
Forms of projection welds
1
3
3
2
6
2 4
5
5
7
5 5 a) Round projections
b) Elongated projections
3 2 5 7
5
8 c) Annular projections
Key 1 Plate thickness 2 Pitch (of projections) 3 Projection height 4 Projection diameter
5 6 7 8
Edge distance Projection length Projection width Annular projection diameter
No.
Term
Definition
22 045
annular projection diameter
mean diameter of an annular projection [See Figure 13c), item 8] NOTE Illustration from BS EN ISO 17659.
22 046
nugget diameter
in resistance spot and projection welding, mean of the minimum and maximum diameters of the fused zone measured at the interface omitting the corona bond area
22 047
row pitch
perpendicular distance between rows of spot welds, aligned parallel to the t axis (see Figure 14, item 4) NOTE Illustration from BS EN ISO 17659.
BSI 2008
.
25
BS 499-1:2009
Figure 14
BRITISH STANDARD
Typical example of weld made using pressure – Double row of staggered, spaced spot welds
2
4
5
3 5
1 Key 1 Weld length 2 Weld pitch 3 Stagger
4 5
Figure 15
Row pitch Edge distance
Typical example of weld made using pressure – Projection weld
2
3
1 Key 1 Weld nugget 2 Nugget diameter
26
.
BSI 2008
3
Nugget thickness
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 048
pitch of projections
distance between adjacent projection centres in a direction parallel to the t line [see Figure 13a), item 2, Figure 13b), item 2, and Figure 13c), item 2]. NOTE Illustration from BS EN ISO 17659.
22 049
weld pitch
In a double row of spot welds, distance between adjacent weld centres in a direction parallel to the t line (same as ‘‘stagger’’; see Figure 14, item 2) NOTE Illustration from BS EN ISO 17659.
22 050
foil thickness
thickness of foil in a foil butt seam weld (see Figure 16, item 3) NOTE Illustration from BS EN ISO 17659.
Figure 16
Foil butt-seam weld
4 1 3 4
2 Key 1 Foil length 2 Foil width
22 051
nugget thickness
3 4
Foil thickness Foil surface
maximum height of nugget in the thickness direction (see Figure 15, item 3) NOTE Illustration from BS EN ISO 17659.
22 052
projection height
height of projection prior to welding [see Figure 13a), item 3, Figure 13b), item 3, and Figure 13c), item 3] NOTE Illustration from BS EN ISO 17659.
22 053
indentation
depression on the exterior surface or surfaces of a spot or seam weld
22 054
projection width
In elongated projections, width of projection, transverse to the t direction [see Figure 13b), item 7] In annular projections, difference between the inner and outer radius of an annular projection [see Figure 13c), item 7] NOTE Illustration from BS EN ISO 17659.
22 055
foil width
width of foil, measured transverse to the t axis (see Figure 16, item 2) NOTE Illustration from BS EN ISO 17659.
BSI 2008
.
27
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 056
projection length
length of an elongated projection [see Figure 13b), item 6] NOTE Illustration from BS EN ISO 17659.
22 057
foil length
length of foil, parallel to the t axis (see Figure 16, item 1) NOTE Illustration from BS EN ISO 17659.
22 058
weld nugget
Figure 17
zone in a spot, seam or projection weld where the metal has been melted (see Figure 17)
Weld nugget
No.
Term
Definition
22 059
indentation depth
depth of permanent indentation of t surface produced by electrode after welding (see Figure 18, item 5) NOTE Illustration from BS EN ISO 17659.
22 060
nugget overlap
width of re-melting of nugget by adjacent nugget (see Figure 19, item 3) NOTE Illustration from BS EN ISO 17659.
Figure 18
Typical example of weld made using pressure – Resistance spot welds
4
5
3 1 2 Key 1 Weld nugget 2 Nugget diameter 3 Nugget thickness
28
.
BSI 2008
4 5
Indentation Indentation depth
BRITISH STANDARD
BS 499-1:2009
Figure 19
Typical example of weld made using pressure – Seam weld
2
1
3 Key 1 Nugget diameter 2 Weld length
3
Nugget overlap
No.
Term
Definition
22 061
resistance weld setter
in resistance welding, person who sets up mechanized or automatic welding
22 062
foil surface
surface between foil and workpiece (see Figure 16, item 4) NOTE Illustration from BS EN ISO 17659.
22 063
mash seam weld
seam or stitch weld, between two components of similar thickness, where the amount of overlap determines the width of weld, so made that the ultimate thickness of the workpiece at the weld approximates to that of one component (see Figure 20)
22 064
nail head welding
variant of heated nozzle welding in which the end of one or two wires which has been fed through the nozzle and heated by a flame or electric discharge, forms a small globule, which under the effect of the applied force is flattened into the shape of a nail head (see Figure 21)
Figure 20
Mash weld
BSI 2008
.
29
BS 499-1:2009
BRITISH STANDARD
Figure 21
Nail head welding
3
4 2
5
1 6 Key 1 Flame 2 Molten metal globule 3 Power source
4 5 6
Nozzle Workpiece Weld
No.
Term
Definition
22 065
straight flash welding
flash welding technique in which flashing starts as soon as the workpieces are brought into and is maintained until upsetting takes place
22 066
flash welding with preheating flash welding technique in which preheating current is applied to the workpieces to facilitate the onset of flashing
22 067
roller spot welding
spot welding in which force is applied continuously and current intermittently to produce a line of separate spot welds, the workpieces being between two electrode wheels or between an electrode wheel and an electrode bar; the wheels apply the force and current and rotate continuously while the line of welds is being made
22 068
step-by-step roller spot welding
spot welding in which force is applied continuously and current intermittently to produce a line of separate spot welds, the workpieces being between two electrode wheels or between an electrode wheel and an electrode bar; the wheels apply the force and current and are stationary during the normal flow of current and rotate when reduced or no current is flowing
22 069
step-by-step seam welding
resistance welding in which force is applied continuously and current intermittently to produce a linear weld, the workpiece being between two electrode wheels or between an electrode wheel and an electrode bar; the wheels apply the force and current and are stationary during the normal flow of current and rotate when reduced or no current is flowing
30
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 070
step-by-step welding
seam or roller spot welding in which the electrode wheel is stationary during the age of weld current and rotates when reduced or no current is flowing
22 071
butt-seam welding
resistance welding applied progressively to a butt t; electrodes press on the work on each side of the t to current through it while welding force is generally applied by other means
22 072
foil butt-seam welding tape butt-seam welding
seam welding of two close square butted components with metal tape or wire placed or fed centrally to bridge one or both sides of the t (see Figure 16)
22 073
pulsation welding woodpecker welding: deprecated
spot or projection welding in which the welding current is interrupted one or more times without release of pressure or change of location of the electrodes
22 074
half-cycle welding
spot, projection or percussion welding in which the welding operation is completed in a whole or part of any one half cycle of the a.c. supply
22 075
electrode tip
surface of an electrode for spot or stitch welding intended to make with the workpiece
22 076
vertical electrode
electrode for spot or stitch welding in which the electrode tip is normal to the axis of the electrode shank
22 077
angle electrode inclined electrode
electrode for spot or stitch welding in which the electrode tip is not normal to the axis of the electrode shank
22 078
offset electrode
electrode for spot or stitch welding in which the electrode tip is not concentric with the axis of the electrode shank
22 079
vertical centre electrode straight electrode
vertical electrode where the electrode tip is concentric with the axis of the electrode shank (See Figure 22.)
22 080
vertical offset electrode
vertical electrode where the electrode tip is not concentric with the axis of the electrode shank (See Figure 23.)
Figure 22
Vertical centre electrode
Figure 23
Vertical offset electrode
No.
Term
Definition
22 081
angle offset electrode
angle electrode in which the electrode tip is not concentric with the axis of the electrode shank (see Figure 24)
22 082
cranked offset electrode cranked electrode
offset electrode in which the centreline of the electrode is not straight (see Figure 25) BSI 2008
.
31
BS 499-1:2009
Figure 24
BRITISH STANDARD
Angle offset electrode
Figure 25
Cranked offset electrode
No.
Term
Definition
22 083
pad electrode flat electrode
electrode having an area of with the work that is much larger than the weld required
22 084
tread
peripheral surface of an electrode wheel
22 085
electrode pick-up
contamination of the resistance welding electrode by metal or scale from the surface of the workpiece
22 086
surface pick-up
contamination of the surface of a resistance weld by particles of the electrode
22 087
welding die die
device for locating the components of a workpiece in a resistance welding machine and for transmitting force and welding current to them
22 088
insert
small piece of metal, usually hard wearing and of comparatively high resistivity, used as an electrode tip, or attached to a welding die and projecting sufficiently beyond it to make with the workpiece
22 089
platen
part of a resistance welding machine on which welding dies or bolsters can be mounted and which conveys force and welding current to them
22 090
bolster
electrode holder for mounting on a platen
22 091
arm
member projecting from a resistance welding machine, which carries current, or s a conductor carrying current, to an electrode holder and which is required to transmit or the welding force
22 092
fin
extrusion of metal extending outward beyond the upset metal in the form of a fin
22 093
splash
thin streaks of metal left adhering between the components or on their surfaces as the result of molten metal being expelled from a t or from under the electrodes during spot, seam, or projection welding
32
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 094
weld area interface: deprecated
area through which welding current es from one component to another during resistance welding
22 095
electrode area clamp area die area
area through which current es from an electrode or a clamp to the workpiece
22 096
backward force4) back pressure: deprecated
force tending to separate the electrodes
22 097
electrode force4)
force transmitted by the electrodes to the workpiece
22 098
backward pressure back pressure: deprecated
pressure (force per unit area) resulting from the backward force
22 099
hand-operated welding machine
welding machine in which the mechanical force is applied by hand
22 100
foot-operated welding machine pedal-operated welding machine
welding machine in which the mechanical force is applied by means of a pedal
22 101
power-operated welding machine
welding machine in which mechanical force is applied by an inanimate source of power
22 102
motor-operated welding machine
welding machine in which the travel of the electrode is provided and the mechanical force is applied by means of a motor-driven mechanism
22 103
portable spot-welding machine
spot-welding machine: a) that can be carried about complete, or b) in which the electrodes, the moving arms and the force application device have flexible connections to a fixed transformer and control equipment, thus providing a limited amount of portability
22 104
plier spot-welding machine pincer spot-welding machine
portable spot-welding machine in which force is applied to electrodes by means of a lever system similar to that of pliers
22 105
capacitor spot-welding machine5) condenser-discharge spot-welding machine
spot-welding machine in which welding current is caused to flow through the secondary winding of a transformer and the welding electrodes by the discharging of a capacitor through the primary winding of the transformer
22 106
inductor spot-welding machine5) induction spot-welding machine
spot-welding machine in which the welding current is caused to flow through the secondary winding of the transformer and the welding electrodes by the interruption of the flow of a direct current through the primary winding of the transformer
22 107
battery spot-welding machine5)
spot-welding machine in which a battery is used to provide the welding current
22 108
weld slug
piece of metal pulled from one sheet when a spot or projection weld is prised apart NOTE The diameter of the slug may be used for weld quality assessment.
4) 5)
Force is sometimes incorrectly referred to as pressure. See 22 020 and 22 098. These machines are sometimes referred to as ‘‘stored-energy machines’’. BSI 2008
.
33
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 109
preheat time
duration of preheating current NOTE In flash welding it is the time between the first age of current and the start of continuous flashing.
22 110
squeeze time6)
period of time between the normal application of force by the electrodes to the work and the first age of current
22 111
heat time6) on-time
duration of each successive current impulse, in pulsation and seam welding
22 112
step time6)
In roller spot welding and in step-by-step roller spot welding, period of time between successive weld times
22 113
chill time6) quench time
period of time between the end of welding current and the start of post-heating current
22 114
post-heat time6) 6)
duration of flow of post-heating current period of time between the cessation of current in one welding cycle and the beginning of current in the next
22 115
current-off time
22 116
pressure-off time6)
In spot, seam and projection welding, period of time between two successive welding cycles when no electrode force is being applied to the workpiece
22 117
preheating current
current used to raise the temperature of a workpiece from ambient temperature to a predetermined value below welding temperature just before the application of welding or flashing current
6)
34
Attention is drawn to Figures 26 to 37 for diagrammatic representations of these . .
BSI 2008
Time and pressure diagram for simple spot, stitch, or projection welding
Time and pressure diagram for pulsation spot or projection welding
Figure 26
Figure 27
BRITISH STANDARD BS 499-1:2009
BSI 2008
.
35
36
Figure 29
Figure 28
Time and pressure diagram for pulsation spot or projection welding, programme control
Time and pressure diagram for spot or projection welding, programme control
BS 499-1:2009
.
BSI 2008
BRITISH STANDARD
Time and pressure diagram for spot welding, programme control with dual-pressure cycle
Time and pressure diagram for seam welding
Figure 30
Figure 31
BRITISH STANDARD BS 499-1:2009
BSI 2008
.
37
38
Figure 33
Figure 32
Time and pressure diagram for roller spot welding
Time and pressure diagram for step-by-step seam welding
BS 499-1:2009
.
BSI 2008
BRITISH STANDARD
Time and pressure diagram for step-by-step roller spot welding
Time and platen movement diagram for straight flash welding
Figure 34
Figure 35
BRITISH STANDARD BS 499-1:2009
BSI 2008
.
39
Figure 36
Generalized diagram of speed, applied force, axial movement and time for continuous drive friction welding
BS 499-1:2009
40
.
BSI 2008
BRITISH STANDARD
Figure 36
Generalized diagram of speed, applied force, axial movement and time for continuous drive friction welding (concluded)
BRITISH STANDARD BS 499-1:2009
BSI 2008
.
41
Figure 37
Generalized diagram of speed, applied force and axial movement with time for stored energy friction welding
BS 499-1:2009
42
.
BSI 2008
BRITISH STANDARD
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 118
post-heating current
current that is ed through a completed weld to heat it, usually for metallurgical reasons
22 119
dual-pressure cycle
welding cycle characterized by the application of two different predetermined electrode forces
22 120
programme control
method of controlling a predetermined sequence of changes of current and/or force during a welding cycle
22 121
heat control
means of smoothly controlling the value of the current flowing through a resistance welding machine
22 122
constant current control
electronic control of the value of welding current, to make its preset value constant and independent of variations in either mains voltage or the amount of magnetic material introduced into the throat of the welding machine
22 123
synchronous control
electronic control system that ensures that the instant of closing the circuit to a resistance welding transformer is always at a preset electrical angle to the instant of zero voltage of the a.c. supply
22 124
non-synchronous control
control system that does not ensure that the instant of closing the circuit to a resistance welding transformer is repetitively at the same instantaneous voltage of the a.c. supply
22 125
phase shift
alteration of the phase relationship between two a.c. voltages NOTE Generally this is used to control the period of conduction in each half cycle of ignitron or thyristor ors.
22 126
phase angle firing angle
electrical angle between the instantaneous zero voltage applied to the anode of an ignitron or thyristor and the point at which it conducts in each half cycle
22 127
slope control
control of the rate of rise or decay of current and the time during which either takes place in the power circuit of a resistance welding machine NOTE This should not be confused with term 32 129.
22 128
rate of slope
rate of change of current when using slope control
22 129
slope time
duration of slope-up or slope-down
22 130
upset travel
1) In resistance butt welding. distance travelled by the moving platen in forging a weld from the point where the components are first brought together to the position where the weld is completed 2) In flash welding. distance travelled by the moving platen in forging a weld from the point where the components have been brought together at the end of flashing to the position where the weld is completed
22 131
preheating loss
total loss of length of both components during preheating a flash weld
22 132
machine stroke
maximum operational stroke obtainable
22 133
operational stroke
distance through which the electrode(s) may travel from rest to the final position during welding
22 134
die opening die gap
In a flash or resistance butt welding machine, distance between the opposing faces of the two pairs of dies when the machine is set up for welding
22 135
clamp opening
distance between the jaws of a clamp in the open position, through which the workpiece would be inserted or withdrawn BSI 2008
.
43
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 136
wearing depth
length or thickness of material that may be worn or dressed off the working surface of an electrode or die before it becomes unserviceable
22 137
parallel spot welding
spot welding in which the secondary current of the welding transformer is fed to two or more pairs of welding electrodes connected in parallel
22 138
push-pull series spot welding series spot welding using two pairs of electrodes and two transformers so that a transformer is connected to the top and bottom electrodes respectively thereby putting all in electrical series
22 139
unipolarity operation unipolarity welding
resistance welding in which succeeding welds are made with pulses of the same polarity
22 140
alternate polarity operation alternate polarity welding
resistance welding in which succeeding welds are made with pulses of opposite polarity
22 141
pre-weld time
period of time between the end of squeeze time and the beginning of welding current flow
22 142
post-weld time
period of time between the end of welding current flow and the start of hold time
22 143
weld delay time
time by which the beginning of welding current flow is delayed with respect to the initiation of the forge delay timer in order to synchronize the welding force with the welding current flow
22 144
weld heat time
In welding with slope control, period of time between the beginning of slope-up and the cessation of steady current or the start of slope-down
22 145
weld interval heat time
weld heat time as applied to pulsation welding
22 146
decay time
time during which decaying of a current takes place
22 147
decay current
current, applied to the primary of a three-phase frequency conversion welding machine transformer at a level below the welding current, that determines the decay time and rate of decay
22 148
current decay
current that decreases from an initial preset value to a final preset value at a rate depending upon the time constant of the circuit
22 149
electronic frequency converter
electronic device that converts the welding power from the frequency of the power supply to a different value
22 150
two-stage initiation
method of operation in which closure of the first stage of the initiation switch initiates the electrode force and closure of the second stage initiates the remainder of the welding cycle NOTE The closure of the second stage may, or may not, immediately follow the closure of the first stage. The first stage is non-beat after closing the second stage. The second stage is not capable of being initiated if the first stage is open.
22 151
repeat operation
method of operation in which once the weld cycle has been initiated it is repeated until the initiation switch is opened
22 152
non-repeat operation single operation
method of operation in which each initiation of the initiation switch provides one welding cycle only
22 153
non-beat
type of system that prevents any interruption of the welding cycle once the initiation switch has been operated
44
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 154
delayed non-beat
type of system which permits the interruption of the welding cycle only up to the end of squeeze time
22 155
gun welding head gun
force-producing and electrode-carrying assembly of a gun welding machine
22 156
dual gun control
method of control in which the welding cycle from one controller can be switched to either of two gun welding heads supplied from one transformer
22 157
dual gun dual welding cycle control dual gun dual sequence control
method of control in which the welding cycle to each of the gun welding heads supplied from one transformer can be controlled independently, the initiation circuit being interlocked to allow the operation of only one gun at a time
22 158
delayed firing
delayed initiation of the welding current in the first half cycle in order to minimize the initial transient of magnetizing current of the welding transformer
22 159
cascade firing sequence firing: deprecated
In multi-weld applications, system of switching in which each transformer or group of transformers is switched in succession, with or without current-off time during switching NOTE This system may be used to limit the supply load.
22 160
electrode face
surface of an electrode that makes with the workpiece
22 161
back plate
plate to which two or more bolsters can be bolted to hold them in their correct relative positions
22 162
back-up die
die into which may be inserted a number of removable inserts or electrodes
22 163
angle centre electrode
angle electrode in which the electrode tip is concentric with the electrode shank (see Figure 38)
22 164
swan-necked electrode double-cranked electrode
cranked offset electrode with a second bend (see Figure 39)
22 165
averaging time
time that is the sum of the maximum allowable conducting (on) time at maximum current and the minimum safe off time in a duty cycle for equipment which may be damaged by any thermal overload
Figure 38
Angle centre electrode
Figure 39
Swan-necked electrode
BSI 2008
.
45
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
22 166
welding pressure time
period during which the welding force is maintained in the making of a weld
22 167
post-heating pressure time
duration of electrode pressure associated with any post-heat treating cycle
22 168
head lowering time
period from the instant the electrode leaves the ‘‘at rest’’ position between successive welds to the instant of touching the workpiece
22 169
pressure application time
total time in any one welding cycle of the application of force by the electrodes to the workpiece
22 170
pressure decrease time
time taken for the force applied by the electrodes to the work to change from one steady value to a lower steady value or to zero
22 171
touch time
one period when two parts to be welded are in during reciprocating preheating for flash welding
22 172
heat diffusion time
one period when two parts to be welded are separated and no current is flowing between them during reciprocating preheating for flash welding
22 173
initial current
steady value of current applied before the commencement of slope-up in welding with slope control
22 174
final current
final steady value of current at the end of the slope-down period of a welding cycle
22 175
phase displacement
alteration of the phase relationship of two alternating electrical functions so that they do not through zero at the same time
22 176
cycle counter
electronic or electromechanical device for counting the number of cycles during a period of flow of an alternating current
22 177
cycle recorder
electronic or electromechanical device for recording, on paper or film, the number of cycles during a period of flow of an alternating current
22 178
modulator
electromechanical device to control the value of current during the heat and cool times in seam welding
22 179
multi-pressure cycle
welding in which more than one steady value of electrode force is used during any one welding cycle
22 180
high lift system
arrangement whereby the maximum electrode clearance for insertion and withdrawal of the workpiece is much greater than the operational stroke
22 181
electrode gap electrode clearance
distance between two corresponding electrode faces when the machine is ready for operation
22 182
follow-up
movement of an electrode assembly that keeps the electrode force applied while surface indentation or collapse is occurring on the workpiece
22 183
preheating allowance
In flash welding, length allowed for the total shortening of both components due to a preheating operation
22 184
push gun poke gun
gun welding head with which the welder applies the welding force by direct manual pushing
46
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
22 185
expansion gun reaction gun
gun welding head that can be used between a workpiece and a fixed member and which derives the welding force by longitudinal expansion
22 186
rocker arm
moveable arm of a welding machine which is pivoted approximately centrally and is pushed upward at one end to bring down the end that carries the moving electrode into with the fixed electrode
22 187
rotary welding transformer
transformer for a butt-seam welding machine that is connected solidly to the wheel electrodes and rotates with them, while the primary current at mains voltage is led in through slip rings
22 188
welding pressure head pressure head
assembly of those parts of a welding machine that produce the force required for welding
22 189
electrode wheel head
part of a seam welding machine that carries the electrode wheel that is lowered and raised to and from the workpiece
22 190
weld-through sealer
mastic gap-filling material that is applied prior to resistance welding to an unpainted metal surface for non-pressure sealing purposes and does not prevent the making of a satisfactory weld
Subsection 23. relating only to friction welding No.
Term
Definition
23 001
friction welding
welding with pressure in which the interfaces are heated by friction by relative movement of the t faces, normally by rotating one or both workpieces in with each other or by means of a separate rotating friction element; the weld is completed by an upset force, generally after rotation has ceased (see Figure 36 and Figure 37)
23 002
friction force
force(s) applied normal to the faying surfaces during the time that there is relative movement between the components
23 003
friction pressure
pressure (force per unit area) on the faying surfaces resulting from the friction force
23 004
friction speed
rate of relative movement of the components
23 005
friction time
time during which relative movement between the components takes place at friction speed and under application of the friction force
23 006
forging speed
in friction welding, relative velocity of the workpieces at the instant the forge force is applied
23 007
burn-off length
overall length loss of the components during the application of the friction force
23 008
flash
metal extruded during friction welding
23 009
friction stir welding
friction welding where heat is generated by friction between a rotating non-consumable spindle and stationary workpieces (see Subsection 27)
23 010
friction welding forge force
longitudinal force applied to the faying surfaces at the time when relative movement between the components is ceasing or has ceased
BSI 2008
.
47
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
23 011
forging pressure forge pressure
pressure (force per unit area) resulting from the forging force
23 012
forge length
amount by which the overall length of the components is reduced during the application of the forge force
23 013
forge rate
rate of shortening of the components during the application of the forge force
23 014
stopping time
time required by the moving component to decelerate from friction speed to zero speed
Subsection 24. relating only to pressure welding No.
Term
Definition
24 001
pressure welding solid-phase welding
welding process in which a weld is made by a sufficient pressure to cause plastic flow of the surfaces, which may or may not be heated
24 002
HF pressure welding
pressure welding in which heat derived from a high frequency alternating electric current of at least 10 kHz, induced or conducted into the workpiece, is used to make plastic the surfaces to be united
24 003
oxy-acetylene pressure welding
pressure welding in which an oxy-acetylene flame is used to make plastic the surfaces to be united NOTE Other fuel gases are sometimes used and in such cases appropriate alterations to the term and the definition are necessary.
24 004
constant-pressure pressure welding
pressure welding in which the weld is made during the period of increasing temperature at a substantially constant pressure
24 005
constant-temperature pressure welding
pressure welding in which the weld is made during the application of increasing pressure at a substantially constant temperature
24 006
cold pressure welding
pressure welding in which pressure alone is used
24 007
heating time
in constant-temperature pressure welding, time during which the parts are heated before the application of the upsetting force
24 008
upsetting time
In constant-temperature pressure welding, time during which the parts to be ed are maintained at the welding temperature and under the upsetting force
24 009
welding time
sum of the heating time and the upsetting time
24 010
deformation
local percentage reduction in the total thickness of sheets or plates at a pressure-welded lap t
Subsection 25. relating only to diffusion welding No.
Term
Definition
25 001
diffusion welding
ing process wherein all the faces to be welded are held together by a pressure insufficient to cause readily detectable plastic flow, at a temperature below the melting point of any of the parts, the resulting solid state diffusion, with or without the formation of a liquid phase, causing welding to occur
48
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
25 002
solid state diffusion welding
diffusion welding in which all the reactions occur in the solid state
25 003
liquid phase diffusion welding
diffusion welding in which solid state interdiffusion between dissimilar materials results in the formation of a liquid phase
Subsection 26. relating only to explosive welding No.
Term
Definition
26 001
explosive welding
pressure welding process to make lap ts or cladding in which the overlapping workpieces are welded when impacted together by the detonation of an explosive charge
26 002
parent plate; static plate
stationary plate in a lap t or plate to be clad
26 003
flyer plate
moving plate in a lap t or the cladding to be applied to the parent plate
26 004
anvil
on which the parent plate rests
26 005
buffer
solid material placed between the explosive and the flyer plate to transmit the explosive force and to protect the flyer plate
26 006
initial plate angle initial inclination
angle of inclination between the flyer plate and the parent plate before welding
26 007
collision angle angle
angle of inclination between the flyer plate and the parent plate during welding
26 008
stand-off distance stand-off gap
distance between the plates in a parallel assembly
26 009
collision front
three-dimensional line of collision points or lines of
26 010
jet
air, expelled from between the plates during the explosion, which cleanses the two surfaces to be ed
26 011
shocked metal zone
parts of the plates that are metallurgically affected by the impact
26 012
blending taper
conically prepared end of a tube usually for tube to tube-plate welding
26 013
distortion plug distortion bung
plugs inserted into vacant holes of a tube-plate to prevent the distortion of the ligament by welds carried out in the adjacent holes
Subsection 27. relating only to friction stir welding No.
Term
Definition
27 001
tool
rotating component that includes the shoulder and probe (see Figure 40)
27 002
probe
part of the tool that extends into the workpiece to make the weld (see Figure 40 and Figure 41) NOTE The probe can be either fixed or adjustable.
27 003
z-direction
direction parallel to the tool axis (see Figure 40)
BSI 2008
.
49
BS 499-1:2009
BRITISH STANDARD
27 004
x-direction
direction parallel to the direction of travel in the plane of the workpiece (see Figure 40)
27 005
y-direction
direction normal to the direction of travel in the plane of the workpiece (see Figure 40)
Figure 40
Basic principle of friction stir welding
X
Y Z 2
3 4
1
5
6
8 7
Key 1 Workpiece 2 Tool 3 Probe 4 Shoulder
Figure 41
5 6 7 8
Advancing side of weld Retreating side of weld Weld surface Exit hole
Macrosection of a butt weld showing incomplete penetration
1 2 4
3 Key 1 Workpiece 2 Probe 50
.
BSI 2008
3 4
Original t line – no deformation Original t line – severely plastically deformed
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
27 006
fixed probe
probe that has a fixed length protruding from the shoulder and its rotation is the same as the shoulder during welding
27 007
shoulder
surface of the tool that s the workpiece during welding (see Figure 40 and Figure 42)
27 008
adjustable probe tool
probe that has adjustable length and its rotation may be different from the shoulder during welding (see Figure 43) NOTE 1 An adjustable probe may be used as a fixed probe. NOTE 2 This tool enables ing to be accomplished without creating excessive toe flash at the start, or an exit hole at the finish.
27 009
heel
part of the tool shoulder that is at the rear of the tool relative to its forward motion (see Figure 42) Figure 42
Heel and heel plunge depth
8
7
9
6
3 1
5
Key 1 Workpiece 2 Probe 3 Shoulder 4 Heel
Figure 43
4
2 5 6 7 8 9
Heel plunge depth Rotary motion Down force Tilt angle Direction of travel
Adjustable probe tool 2
1 Key 1 Workpiece
2
Adjustable probe tool
BSI 2008
.
51
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
27 010
fixed bobbin tool
tool with two shoulders separated by a fixed length probe (see Figure 44)
27 011
self-reacting bobbin tool
tool with two shoulders separated by a probe whose length can be adjusted during welding (see Figure 45) NOTE The self-reacting bobbin tool allows the shoulders to automatically maintain with the workpiece.
Figure 44
Fixed bobbin tool
2
1 3 5 Key 1 Workpiece 2 Bobbin tool 3 Upper shoulder
Figure 45
4 5
4 Probe Lower shoulder
Self-reacting bobbin tool
2
6
1
3 5
Key 1 Workpiece 2 Top shoulder 3 Probe
52
.
BSI 2008
4
4 5
Bottom shoulder Reactive forces
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
27 012
position control
method to provide the required position of the tool during welding
27 013
lateral offset
distance from the tool axis to the root face
27 014
tilt angle travel angle
angle between the normal to the plane of the workpiece surface and the tool axis measured in the Z-X plane of travel of the tool axis (see Figure 42)
27 015
sideways tilt angle work angle
angle between the normal to the plane of the workpiece surface and the tool axis measured in the Z-Y plane normal to the direction of travel of the tool
27 016
tool plunge depth
inserting the tool into the workpiece in order to make a weld
27 017
heel plunge depth
distance the heel extends into the parent material (see Figure 42)
27 018
advancing side
side of the weld where the direction of tool rotation is the same as the welding direction (see Figure 40)
27 019
retreating side
side of the weld where the direction of tool rotation is opposite to the welding direction (see Figure 40)
27 020
force control
method to provide the required force on the tool during welding
27 021
down force traversing force z-force
axial force applied in the z-direction by the tool to the workpiece during welding in the x-direction (see Figure 42)
27 022
sideways force y-force
Force experienced in the y-direction by the tool to the workpiece during welding in the x-direction
27 023
traversing force x-force
force applied in the x-direction by the tool to the workpiece during welding in the x-direction
27 024
travel speed welding speed traversing speed traversing rate
In friction stir welding, distance travelled by the probe axis, in a direction parallel to the t axis, per unit time NOTE No is taken of any lateral oscillation of the probe axis.
27 025
dwell time at start of weld
time interval between when the rotating tool reaches its maximum depth in the parent material and the start of travel
27 026
dwell time at end of weld
time interval after travel has stopped but before the rotating tool has begun to withdraw from the weld
27 027
heat affected zone HAZ
area affected only by heat with no visible macroplastic deformation detectable by using optical microscopy (see Figure 46)
27 028
thermomechanically affected area affected by both heat and macroplastic deformation (see zone Figure 46) TMAZ
27 029
nugget
part of the TMAZ where the microstructure has been subject to recrystalization (see Figure 46) NOTE In most aluminium alloys, the nugget is bounded by unrecrystalized TMAZ. In many other alloys, the nugget extends most or all of the TMAZ, and possibly into the HAZ.
BSI 2008
.
53
BS 499-1:2009
BRITISH STANDARD
Figure 46
1
Cross-section of a friction stir weld
2
Key 1 Parent material 2 Heat affected zone (HAZ)
3
3 4
4(+3)
3
2
1
Thermomechanically affected zone (TMAZ) Nugget
No.
Term
Definition
27 030
exit hole
hole remaining at the end of a weld after the withdrawal of the tool (see Figure 40 and Figure 47)
27 031
shoulder footprint
partially or fully formed ring surrounding the exit hole (see Figure 47)
Figure 47
Tool shoulder footprint visible at the exit hole
3 1
4
2 Key 1 Workpiece 2 Shoulder footprint
3 4
Exit hole Weld surface
No.
Term
Definition
27 032
flash
imperfection consisting of excessive metal protruding upwards at the weld toe
27 033
underfill
depression resulting when the weld face is below the adjacent parent material surface
27 034
incomplete penetration
imperfection where the full thickness of the t has not been welded (see Figure 41)
54
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
27 035
void volumetric flaw
non-planar discontinuity in the TMAZ which may be buried or surface breaking NOTE The extent may be classified as continuous, sporadic, isolated or clustered, fine, coarse, etc.
27 036
t line remnant
imperfection consisting of a semi-continuous layer of oxide in the weld NOTE The severity of this imperfection depends upon its extent and the proximity of the adjacent oxide particles. t line remnants can have some effect on the mechanical performance of the t.
27 037
kissing bond
weakly bonded t line remnant in the root region, often difficult to detect non-destructively
27 038
hook
curved notch on the advancing side of the lap weld (see Figure 48, T3)
27 039
lap t sheet thinning
workpiece thickness minus the distance from the weld face to the end of the hook (see Figure 48) NOTE In Figure 48, the sheet thinning in the lap t is T1 – T2 or T1 – T3.
BSI 2008
.
55
BS 499-1:2009
Figure 48
BRITISH STANDARD
Cross-section of friction stir lap weld showing undesirable/extreme plate thinning on the retreating side and a hook feature on the advancing side of the weld
T2
T1
T3
a) Upper plate thinning Key T1 Sheet thickness T2 Retreating side, sheet thickness T3 Advancing side, sheet thickness
1
2
4
3
b) Lower plate thinning
1 2 6
5 c) Ideal situation Key 1 Upper workpiece 2 Lower workpiece 3 Retreating side, notch tip orientation away from shoulder side
56
.
BSI 2008
4 5 6
Advancing side, notch tip orientation away from shoulder side Retreating side, notch tip abrupt end Advancing side, notch tip abrupt end
BRITISH STANDARD
BS 499-1:2009
Section 3. relating to fusion welding (welding without pressure) Subsection 31. relating to more than one subsection No.
Term
Definition
31 001
fusion welding
welding without application of external force in which the faying surface(s) has (have) to be molten; usually, but not necessarily, molten filler metal is added
31 002
back-step sequence
welding sequence in which short lengths of run are deposited in a direction opposite to the general progress of welding the t (see Figure 49)
Figure 49
Example of back-step sequence
No.
Term
Definition
31 003
back-step welding
welding following a back-step sequence
31 004
continuous weld
weld extending along the entire length of a t
31 005
intermittent weld
series of welds of the same type and dimensions at intervals along a t
31 006
butt weld
1) In a butt t. weld between two parts making an angle to one another of 135º to 180º inclusive in the region of the weld such that a line parallel to a surface of one part, perpendicular to the line of the t, and ing through the centre of the fusion face of that part, es through the fusion face of the other part (see Figure 50.1 to Figure 50.11, Figure 50.13, Figure 50.15 and Figure 50.16) 2) In a T-t. weld between two parts making an angle to one another of 45º to 90º inclusive in the region of the weld such that a line parallel to a surface of one part, perpendicular to the line of the t, and ing through the centre of the fusion face of that part, es through the fusion face of the other part (see Figure 50.19, Figure 50.21, Figure 50.23 and Figure 50.24) 3) In a corner t. weld between two parts making an angle to one another of 45º to 135º inclusive in the region of the weld such that a line parallel to a surface of one part, perpendicular to the line of the t, and ing through the centre of the fusion face of that part, es through the fusion face of the other part (see Figure 50.32)
BSI 2008
.
57
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 007
square butt weld
butt weld in the preparation for which the fusion faces lie approximately at right angles to the surfaces of the components to be ed and are substantially parallel to one another (see Figure 50.1 to Figure 50.6)
31 008
single-V butt weld
butt weld in the preparation for which the edges of both parts are bevelled so that in cross section the fusion faces form a V (see Figure 50.7 to Figure 50.9)
31 009
staggered intermittent weld
intermittent weld on each side of a t (usually fillet welds in T and lap ts) arranged so that the welds on one side lie opposite to the spaces on the other side along the t
31 010
double-V butt weld
butt weld in the preparation for which the edges of both components are double bevelled so that in cross section the fusion faces form two opposing V s (see Figure 50.10, Figure 50.11 and Figure 50.13)
31 011
single-U butt weld
butt weld in the preparation for which the edges of both components are prepared so that in cross section the fusion faces form a U
Figure 50
Sketches of types of ts, types of weld(s) and weld preparations
Figure no.
58
Sketch
Type of t
Type of weld(s)
Preparation
Remarks
50.1
Butt
Butt
Close square
Full penetration
50.2
Butt
Butt
Close square
Full penetration
50.3
Butt
Butt
Raised edges
—
50.4
Butt
Butt
Close square
Partial penetration
50.5
Butt
Butt
Open square with backing bar
Full penetration
50.6
Butt
Butt
Close square
Full penetration. Welded from both sides
50.7
Butt
Butt
Single-V with root faces.
Full penetration
50.8
Butt
Butt
Single-V with backing strip
Full penetration
50.9
Butt
Butt
Single-V with root faces
Full penetration. Sealing run used
.
BSI 2008
BRITISH STANDARD
Figure 50 Figure no.
BS 499-1:2009
Sketches of types of ts, types of weld(s) and weld preparations (continued) Sketch
Type of t
Type of weld(s)
Preparation
Remarks
50.10
Butt
Butt
Double-V with root faces
Full penetration. Welded from both sides
50.11
Butt
Butt
Double-V with broad root faces
Partial penetration. Welded from both sides
50.12
Butt
Butt and fillet
Single-V with broad root faces
Partial penetration. Welded from both sides
50.13
Butt
Butt
Double-V with root faces
Full penetration. Welded from both sides
50.14
Butt
Fillet
Close square
Welded from both sides
50.15
Butt
Butt
Single-bevel with root face
Full penetration
50.16
Butt
Butt
Single-bevel with root face. Thicker plate tapered
Full penetration. Sealing run used
50.17
Butt
Compound of butt and fillet
Single-bevel with root face
Full penetration. Sealing run used
50.18
Butt
Compound of butt and fillet
Single-bevel with root face
Full penetration. Welded from both sides
50.19
T
Butt
Single-bevel with root face
Full penetration
BSI 2008
.
59
BS 499-1:2009
Figure 50 Figure no.
60
BRITISH STANDARD
Sketches of types of ts, types of weld(s) and weld preparations (continued) Type of t
Type of weld(s)
Preparation
Remarks
50.20
T
Fillet
Close square
Welded from both sides
50.21
T
Butt
Doublebevel
Full penetration. Welded from both sides
50.22
T
Compound of butt and fillets
Doublebevel
Full penetration. Welded from both sides
50.23
T
Butt
Doublebevel with wide or deep root face
Partial penetration. Welded from both sides
50.24
T
Butt
Single-bevel
Full penetration
50.25
T
Fillet
Edge prepared as necessary
—
50.26
Cruciform
Butt
Doublebevel
Welded from both sides
50.27
Cruciform
Fillet
Close square
Welded from both sides
50.28
Lap
Fillet
Square edge
—
.
Sketch
BSI 2008
BRITISH STANDARD
Figure 50 Figure no.
BS 499-1:2009
Sketches of types of ts, types of weld(s) and weld preparations (concluded) Sketch
Type of t
Type of weld(s)
Preparation
Remarks
50.29
Lap
Plug
Holes(s) of any shape in one plate
—
50.30
Lap
Fillet
Hole(s) of any shape in one plate
Welded all round
50.31
Lap
Fusion spot
None
—
50.32
Corner
Butt
Single-bevel with root face
Full penetration
50.33
Corner
Fillet
Edge prepared as necessary
—
50.34
Corner
Fillets
Square edge
Welded from both sides
50.35
Corner
Fillets
Square edge
Partially-lapped corner. Welded from both sides
50.36
Edge
Edge
Square edge
Edges fully covered
No.
Term
Definition
31 012
double-U butt weld
butt weld in the preparation for which the edges of both components are prepared so that in cross section the fusion faces form two opposing Us having a common base
31 013
single-J butt weld
butt weld in the preparation for which the edge of one component is prepared so that in cross section the fusion face is in the form of a J and the fusion face of the other component is at right angles to the surfaces of the first component
31 014
double-J butt weld
butt weld in the preparation for which the edge of one component is prepared so that in cross section the fusion face is in the form of two opposing Js and the fusion face of the other component is at right angles to the surfaces of the first component
BSI 2008
.
61
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 015
fillet weld
fusion weld, other than a butt, edge or fusion spot weld, which is approximately triangular in transverse cross section (examples are shown in Figure 50.14, Figure 50.20, Figure 50.25, Figure 50.27, Figure 50.28, Figure 50.30, Figure 50.33, Figure 50.34 and Figure 50.35)
31 016
tack weld
weld used to assist assembly or to maintain alignment of edges during welding
31 017
plug weld
weld made by filling a hole in one component of a workpiece with filler metal so as to it to the surface of an overlapping component exposed through the hole (see Figure 50.29)
31 018
seal weld sealing weld
weld intended primarily to provide tightness against leakage of gas or fluid
31 020
edge weld
weld in an edge t, other than a seal weld, used for ing two or more parts and in which the weld metal covers part or the whole of the edge widths (see Figure 50.36)
31 021
butt t
connection between the ends or edges of two parts making an angle to one another of 135º to 180º inclusive in the region of the t (see Figures 50.1 to 50.18)
31 022
T-t
connection between the end or edge of one part and the face of the other part, the parts making an angle to one another of more than 5º up to and including 90º in the region of the t (see Figures 50.19 to 50.25)
31 026
lap t
connection between two overlapping parts making an angle to one another of 0º to 5º inclusive in the region of the weld or welds (see Figures 50.28 to 50.31)
31 027
corner t
connection between the ends or edges of two parts making an angle to one another of more than 30º but less than 135º in the region of the t (see Figures 50.32 to 50.35)
31 028
edge t
connection between the edges of two parts making an angle to one another of 0º to 30º inclusive in the region of the t (see Figure 50.36)
31 031
root face nose: deprecated
portion of a fusion face at the root that is not bevelled or grooved (see Figure 51)
31 034
feather edge
edge formed at the root due to bevelling being carried through from one surface to the other
31 035
land
straight portion of a fusion face between the root face and the curved part of a J-edge preparation
31 036
edge preparation end preparation7)
surface prepared on the edge of a component to be welded
31 037
toe weld edge: deprecated
boundary between a weld face and the parent metal or between runs (see Figure 52) NOTE The term ‘‘toe’’ should always be qualified according to whether it applies to the complete weld or to individual runs.
31 038
7)
62
angle of bevel angle of preparation: deprecated
angle at which the edge of a component is prepared for making a weld measured from the normal to the direction of the component (see Figure 51)
This term is applied only to strip and pipes or tubes. .
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 040
included angle angle of preparation
angle between the planes of the fusion faces of parts to be welded (see Figure 51)
31 041
root radius
radius of the curved portion of the fusion face in a component prepared for a single-J, single-U, double-J or double-U weld (see Figure 51)
31 043
leg length size
distance from the actual or projected intersection of the fusion faces and the toe of a fillet weld, measured across the fusion face (see Figure 52) NOTE 1 For a 90º fillet weld having equal leg lengths, the term ‘‘size’’ has been used to mean leg length for a convex or mitre fillet weld or 1.4 times the design throat thickness for a concave fillet weld. In some applications ‘‘size’’ has been used to mean design throat thickness and therefore to avoid confusion ‘‘size’’ has been dropped as a preferred term. NOTE 2 In specifying a fillet weld the dimensions should now be clearly indicated as minimum leg length(s) or design throat thickness or both as appropriate.
BSI 2008
.
63
BS 499-1:2009
Figure 51
BRITISH STANDARD
Dimensions of root gap, root face, root radius, land, included angle and angle of bevel for typical weld preparations Included angle
Included angle Angle of bevel
Angle of bevel
Depth of root face Root gap
Depth of root face
a) Single sided V-butt
Root radius
Root gap b) Single sided U-butt
Included angle
Included angle Angle of bevel
Angle of bevel Depth of root face
Root radius
Depth of root face
Root gap
Root gap
c) Double sided V-butt
d) Double sided U-butt
Included angle and angle of bevel
Included angle and angle of bevel
Depth of root face Depth of root face Root radius Root gap
Root gap Width of land
e) Single sided level T-butt
64
.
BSI 2008
f) Single sided J T-butt
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 044
actual throat thickness throat thickness
fillet welds, the value of the height of the largest isosceles triangle that can be inscribed in the section of the finalized weld butt welds, the minimum distance from the surface of the part to the bottom of the penetration (for examples see Figure 53) NOTE This is an arbitrary dimension that might not have particular relevance to design.
31 045
design throat thickness
throat thickness specified by the designer (for examples see Figure 53)
31 046
effective throat thickness
minimum distance between the root and the cap in a completed weld NOTE This may be used for assessment purposes.
31 047
weld width
shortest distance between the outer toes of a weld face (see Figure 52)
31 050
excess weld metal reinforcement overfill
weld metal lying outside the plane ing the toes (see Figure 54)
BSI 2008
.
65
BS 499-1:2009
Figure 52
66
.
Examples of toes, legs, weld widths and fusion faces
BSI 2008
BRITISH STANDARD
BRITISH STANDARD
Figure 53
E
BS 499-1:2009
Examples of actual, effective, design and maximum throat thickness of typical welds
A
D
M
a) Full penetration single V butt with sealing run
D
A
E
M
E
D
A
b) Partial penetration single V butt
D E
A
c) Full penetration single level T butt with sealing run
M
M
d) Convex fillet weld
E D
E D
A
e) Concave fillet weld
A
M
M
f) Fillet weld with root gap and root penetration
Key Preparation face
Final t surface
Nominal weld zone
Dimension line drawn through toes
Actual fusion boundary E Effective throat thickness D Design throat thickness
A Actual throat thickness M Maximum throat thickness
NOTE The positions of the dimension lines are shown correctly for the geometries illustrated but might vary for other cap and root profiles.
BSI 2008
.
67
BS 499-1:2009
Figure 54
No.
BRITISH STANDARD
Examples of excess weld metal
Term
31 051
weld slope S
Definition 8)
In the case of straight welds, angle between the root line and the positive x-axis of the horizontal reference plane (see Figure 55); the slope, is measured in mathematically positive (i.e. counter-clockwise) direction NOTE The co-ordination system is arranged so that the root line lies in the vertical reference plane, i.e. x/z-plane, (see Figure 55) and that the working direction radiates outward from the coordinate origin. In the case of curved welds, the same stipulation applies, the slope is obtained from the tangent to the root line, at the particular cross section of the weld in question and the x-axis.
31 052
weld rotation9) R
angle between the centreline of the weld (i.e. the line ing the centres of the weld root at the capping layer) and the positive z-axis or a line parallel to the y-axis, measured in the mathematically positive (i.e. counter-clockwise) direction in the plane of the transverse cross section of the weld in question
31 053
welding position
orientation of a weld expressed in of working position, weld slope and weld rotation
31 054
flat position downhand position: deprecated
welding position in which the welding is horizontal, with the centreline of the weld vertical (see Table 1)
31 055
horizontal vertical position
welding position in which the welding is horizontal (see Table 1)
31 056
vertical up position
welding position in which the welding is upwards (see Table 1)
31 057
vertical down position
welding position in which the welding is downwards (see Table 1)
8)
9)
68
The main positions, defined by weld slope and weld rotation, are given in Table 1 and illustrated in Figure 57 and Figure 58. A comparison between the BS form of designation (based on the AWS/ANSI form) and the form given in ISO 6947 is shown in Figure 58. For the sake of clarity, symbols for the main working positions are given from the coordinate origin, the working direction being outwards. This term is applied only to strip and pipes or tubes. .
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 058
horizontal overhead position welding position in which the welding is horizontal and overhead (see Table 1)
31 060
horizontal position
welding position in which the welding is horizontal, with the centreline of the weld horizontal (see Table 1)
31 061
overhead position
welding position in which the welding is horizontal and overhead, with the centreline of the weld vertical (see Table 1)
31 062
inclined position
any welding position not defined by the above positions, defined by slope and rotation
31 063
manipulator positioner
device to hold, tilt and rotate the workpiece to the desired position
31 064
bead
single run of weld metal on a surface Table 1
A)
and symbols for main welding positions
31 054 Flat position
31 055 Horizontal vertical position
31 060 Horizontal position
31 058 Horizontal overhead position
31 061 Overhead position
Symbol
PA
PB
PC
PD
PE
Weld slope
Weld rotation
S
R
0º
180º
90º
90º
0º
45º
0º
135º
180º
45º
180º
135º
0º
0º
0º
180º
180º
0º
180º
180º
0º
225º
0º
315º
180º
225º
180º
315º
0º
270º
180º
270º
31 056 Vertical up position
PF
90º
—
31 057 Vertical down position
PG
270º
—
NOTE 1 To avoid confusion with existing abbreviations, e.g. F for flat, in principle the letter ‘‘P’’ (for position) has been placed in front of the symbol to indicate ‘‘main position’’. NOTE 2 Tolerances for the main positions are not specified in this British Standard because they depend on the different welding procedures used. A)
In accordance with ISO 6947.
BSI 2008
.
69
BS 499-1:2009
Figure 55
Welding positions: slope (S)
Figure 56
Schematic diagram of main welding positions
70
.
BSI 2008
BRITISH STANDARD
BRITISH STANDARD
BS 499-1:2009
Figure 57
Figure 58
Simplified view of main welding positions
Comparison of UK (USA) and ISO welding positions UK (USA)
ISO
1G
PA
2G
PC
3G
PF Vertical up PG Vertical down
4G
PE
5G
PF Vertical up PG Vertical down
BSI 2008
.
71
BS 499-1:2009
Figure 58
BRITISH STANDARD
Comparison of UK (USA) and ISO welding positions (concluded) UK (USA)
ISO
6G
H-L045
1F
L 45/PA
1FR
L 45/PA
2F
PB
2FR
PB
3F
PF Vertical up PG Vertical down
4F
PD
5F
PF Vertical up PF Vertical down
72
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 066
full penetration welding
welding using a technique which ensures that the weld metal fully penetrates the t with complete root fusion
31 067
partial penetration weld
weld in which the fusion penetration is intentionally less than full penetration
31 068
root run root
first run deposited in the root of a multi-run weld
31 070
sealing run
final run deposited on the root side of a fusion weld NOTE This should not be confused with term 31 018.
31 071
melt run
line of parent metal that has been melted by ing a welding flame or arc along the surface of the metal
31 072
weld pool
pool of liquid metal formed during fusion welding NOTE In electroslag welding the term includes the slag bath.
31 073
run-on plate
piece of metal so placed as to enable the full section of weld metal to be obtained at the beginning of a t
31 074
run-off plate
piece of metal so placed as to enable the full section of weld metal to be maintained up to the end of a t
31 075
permanent backing
backing designed to remain permanently ed to the workpiece after welding (See Figure 50.8.) NOTE It may remain as part of the t or be removed by machining or other means.
31 076
permanent backing ring
permanent backing inside a pipe, consisting of a continuous ring
31 077
temporary backing
backing designed to be removed from the workpiece after welding
31 078
temporary backing ring
temporary backing in the form of a ring
31 080
fusible insert
pre-placed filler material that is fused to aid the formation of a weld made from one side only (see Figure 59)
Figure 59
Weld preparation using a fusible insert
No.
Term
Definition
31 081
welding speed
in fusion welding, length of a single or multirun weld completed in a unit of time
31 082
rate of travel travel speed
time required to complete a unit length of a single run of weld or melt run
31 083
slag
non-metallic substance that results from fusion of an electrode covering, a flux core or a powdered flux and which, after solidification, partly or totally covers the weld metal BSI 2008
.
73
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 084
wire guide wire feed nozzle
part of an electro-slag or electro-gas welding machine that guides the electrode wire to the point of welding and also carries the electric current to the wire
31 085
inter temperature
In a multi-run weld, temperature of the weld and adjacent parent metal immediately prior to the application of the next run
31 086
stringer bead
bead that is produced with no weaving motion of the filler rod or welding tool
31 087
tube
metal tube in a metal-arc or electro-slag welding head for ing welding current to, and for guiding, a wire electrode
31 088
aluminothermic welding
flow welding whereby the welding heat is obtained from reacting a mixture of metal oxides with finely ground aluminium powder whose ignition produces an exothermic reaction in which the molten metal produced is the filler metal
31 090
electroslag welding
fusion welding using the combined effects of current and electrical resistance in a consumable electrode, or electrodes, and a conducting bath of molten slag through which the electrode es into the molten pool, both the pool and the slag bath being retained in the t by cooled shoes which move progressively upwards (accompanied by a figure) NOTE After the initial arcing period the end of the electrode is covered by the rising slag and then melts continuously until the t is completed. Electrodes may be bare or flux cored strip(s) or plate(s).
31 091
gas backing
protection of the root from the opposite side of the weld surface by using gas to prevent oxidation and to reduce the risk of a molten pool collapse
31 092
gas flow rate
rate of flow of shielding gas through a torch at normal temperature and pressure
31 093
trailing gas shield
additional supply of shielding gas protecting the weld and the weld area during cooling
31 094
baking oven
heated receptacle in which welding consumables are dried/ baked
31 095
drying oven
See baking oven (31 094).
31 096
quiver
portable, heated or non-heated, receptacle for holding or drying of covered electrodes
31 097
tack sequence
order in which tack welds are placed
31 098
dilution
alteration of composition of the metal deposited from a filler wire or electrode due to mixing with the melted parent material, usually expressed as the percentage of melted parent metal in the weld metal
31 100
welding procedure requirements
all the specified requirements in a welding procedure specification
31 102
weld surface with bead ripples
regular undulations of the weld surface (see Figure 60)
31 103
74
.
back or front
BSI 2008
NOTE Illustration from BS EN ISO 17659.
piece of metal or other auxiliary material placed against the workpiece on either the back or front face of the t in order to retain the molten weld metal
BRITISH STANDARD
Figure 60
BS 499-1:2009
Typical example of butt weld – General view of butt weld
1 7
9
8 2 4
5 6 3 10 Key 1 Weld width 2 Excess weld metal 3 Penetration bead thickness 4 Maximum throat thickness 5 Design throat thickness
6 7 8 9 10
Actual throat thickness Weld toe angle Weld length Weld surface with bead ripples Root width
BSI 2008
.
75
BS 499-1:2009
Figure 61
BRITISH STANDARD
Preparation for double-bevel T-butt welds
10 8
4 7 1 5
2
11 6
9 3 Key 1 Longitudinal edge of preparation 2 Root gap 3 Depth of root face 4 Longitudinal edge of root face 5 Side edge of root face 6 Side edge of preparation
7 8 9 10 11
t width Angle of bevel Depth of preparation Included angle Fusion face (prepared)
No.
Term
Definition
31 105
capping run
final run deposited on the top surface of a fusion weld
31 106
depth of preparation
distance between the workpiece surface and the root face, measured normal to the former (see Figure 61, item 9) NOTE Illustration from BS EN ISO 17659.
31 107
depth of raised edge
distance between the fusion face and the near side of the workpiece in a raised-edge butt t (see Figure 6, item 5) NOTE Illustration from BS EN ISO 17659.
31 108
depth of root face
width of root face, measured normal to the workpiece surface (see Figure 7, item 3, Figure 10, item 3, and Figure 61, item 3) NOTE Illustration from BS EN ISO 17659.
31 109
76
.
filling run(s)
BSI 2008
in multi-layer welding, run(s) deposited after the root run(s) and before the capping run(s)
BRITISH STANDARD
Figure 62
BS 499-1:2009
Typical example of multi-run fusion weld – Double V-butt weld
1 4 3
2 5
3 4
Key 1 Toe 2 Root run 3 Layers of filling runs
Figure 63
4 5
Layer of capping runs First run on second side
Preparation for fillet weld (T-t)
1
3
5 4 2 1 Key 1 Plate thickness 2 Root gap 3 t length
4 5
Included angle Fusion face (fillet weld)
BSI 2008
.
77
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 111
fusion face (fillet weld)
face of workpiece to be fused by a fillet weld (see Figure 61, item 11 and Figure 63, item 5) NOTE Illustration from BS EN ISO 17659.
31 112
fusion face (prepared)
fusion face of a weld preparation that has been prepared by cutting, grinding or machining (see Figure 7, item 8, Figure 10, item 11, Figure 61, item 11, and Figure 65, item 7) NOTE Illustrations are from BS EN ISO 17659.
31 113
fusion face (unprepared)
fusion face that does not require preparation (see Figure 5, item 8, Figure 6, item 7, and Figure 7, item 7) NOTE Illustrations are from BS EN ISO 17659.
31 114
fusion penetration
1) In fusion welding. depth to which the parent metal has been fused (See Figure 4.) 2) In spot, seam or projection welding. distance from the interface to the edge of the weld nugget, measured in each case on a cross section through the centre of the weld and normal to the surface (see Figure 17)
31 117
layer of capping runs
weld metal, deposited on the final surfaces of the t [see Figure 62, item 4, Figure 64a), item 5, Figure 64b), item 5, and Figure 64c), item 5] NOTE Illustrations are from BS EN ISO 17659.
31 118
layers of filling runs
weld metal, deposited beneath the capping runs [see Figure 62, item 3, Figure 64a), item 4, Figure 64b), item 4, and Figure 64c), item 4] NOTE Illustrations are from BS EN ISO 17659.
78
.
BSI 2008
BRITISH STANDARD
Figure 64
BS 499-1:2009
Typical examples of multi-run fusion welds 5 4
1 2
2
5
4
1 3
3
a) Single V-butt weld with root face
b) Single bevel T-butt weld
7
8 2 2 8
5 4
3
6
9
c) Single V-butt weld with sealing run Key 1 Penetration bead thickness 2 Toe 3 Root run 4 Layers of filling runs 5 Layer of capping runs
d) Multi-run fillet weld
6 7 8 9
Sealing run Fusion penetration Leg length Root penetration
BSI 2008
.
79
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 119
length of raised edge
length of the raised edge in the direction of the t (see Figure 6, item 2) NOTE Illustration from BS EN ISO 17659.
31 120
longitudinal edge of preparation
junction of the fusion face and the upper workpiece surface (see Figure 61, item 1, and Figure 65, item 3) NOTE Illustrations are from BS EN ISO 17659.
31 121
longitudinal edge of root face
junction of the fusion face and the root face (see Figure 61, item 4) NOTE Illustration from BS EN ISO 17659.
31 122
longitudinal side of raised edge
junction of the upturned upper workpiece surface and the fusion face in a raised-edge bead weld (see Figure 6, item 3) NOTE Illustration from BS EN ISO 17659.
31 123
penetration bead thickness
height of the root bead above the reverse side of the workpiece [see Figure 64a), item 1, Figure 64b), item 1, and Figure 66, item 10] NOTE Illustrations are from BS EN ISO 17659.
31 124
radius of raised edge
radius of curved surface of a raised-edge butt weld (see Figure 6, item 6) NOTE Illustration from BS EN ISO 17659.
Figure 65
Preparation for single U-butt weld
3 2
7
6
1 5
4 8
Key 1 Plate thickness 2 t length 3 Longitudinal edge of preparation 4 Root radius NOTE
80
.
5 6 7 8
For other dimensions see Figure 50.
BSI 2008
Side edge of root face Width of prepation Fusion face (prepared) Root face
BRITISH STANDARD
Figure 66
BS 499-1:2009
Typical example of fusion weld – Single V-butt weld
4 8 2 3
9 1
10 11 Key 1 Parent metal 2 Weld metal 3 Heat-affected zone 4 Weld zone 5 Fusion penetration 6 Fusion line
7 8 9 10 11
7
5
6
Root of weld Weld width Excess weld metal Penetration bead thickness Fusion zone
No.
Term
Definition
31 125
root gap
gap between the root faces NOTE
See also Figures 5, 7, 61, 63 and 65.
31 126
root (of weld)
zone on the side of the first run farthest from the welder (see Figure 4, Figure 66, Figure 67 and also 31 179)
31 127
root penetration
distance of penetration of molten weld into the root zone [see Figure 64d), item 9, and Figure 67, item 10] NOTE Illustrations are from BS EN ISO 17659.
BSI 2008
.
81
BS 499-1:2009
Figure 67
BRITISH STANDARD
Typical example of fusion weld – Fillet weld
5
4
1 11
2
9 1 6 7
3
10 9
Key 1 Parent metal 2 Weld metal 3 Heat-affected zone 4 Weld zone 5 Fusion penetration 6 Extremity of HAZ
7 8 9 10 11
Root of weld Excess weld metal Leg length Root penetration Fusion zone
8 Weld medal Fusion zone Fusion boundary Extremity of HAZ Line between toes
No.
Term
Definition
31 128
root width
width of the root bead (see Figure 60, item 10) NOTE Illustration from BS EN ISO 17659.
31 129
side edge of preparation
junction of the end of the t and the preparation (see Figure 10, item 5, and Figure 61, item 6) NOTE Illustrations are from BS EN ISO 17659.
31 130
side edge of root face
junction of the end of the end of the t and the root face (see Figure 10, item 4, Figure 61, item 5, and Figure 65, item 7) NOTE Illustrations are from BS EN ISO 17659.
31 133
weld toe angle
angle between the upper workpiece surface and the tangent to the metal cap at the tow, in a plane normal to the weld axis (see Figure 60, item 7) NOTE Illustration from BS EN ISO 17659.
31 134
width of preparation
projected distance between the root face and the longitudinal edge of preparation, measured in the plane of the upper workpiece surface, normal to the weld axis (see Figure 10, item 6, and Figure 65, item 8) NOTE Illustrations are from BS EN ISO 17659.
82
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 135
width of prepared face
distance between the root face and the longitudinal edge of the preparation (see Figure 10, item 9) NOTE Illustration from BS EN ISO 17659.
31 136
buttering
overlay welding in a t preparation to provide a suitable transition between the parent material and subsequent welds
31 137
cosmetic run cosmetic
for superficial remelting of the weld in order to enhance appearance
31 138
slope-down
1) controlled gradual decrease of the current in slope control 2) in beam welding, controlled decrease of the beam power at the end of welding
31 139
slope-up
1) controlled gradual increase of the current in slope control 2) in beam welding, controlled increase of the beam power at the beginning of welding
31 140
tacking run tacking
in beam welding, made to hold the parts to be welded in proper alignment until the final welds are made
31 141
tack welding
fixing of workpieces or assemblies to be ed in their proper position by weld spots or short lengths of weld
31 143
slot lap t slot weld
t between two overlapping components made by depositing a fillet weld round the periphery of a hole in one component so as to it to the surface of the other component exposed through the hole (See Figure 50.30.)
31 144
backing weld pool backing
material placed at the reverse side of a t preparation for the purpose of ing molten weld metal; it may also be used to assist formation of the root run
31 145
both-side welding
welding in which the weld is made from both sides of the workpiece
31 146
double-side single-run welding
welding in which the weld is made from both sides of the workpiece in one run, each run consisting of one bead only
31 147
keyhole technique
welding technique in which concentrated heat penetrates through a workpiece, forming a hole (keyhole) at the leading edge of the weld pool NOTE As the heat source progresses, the molten metal fills the keyhole.
31 148
multi-run welding
welding in which the weld is made or layer deposited in more than two runs NOTE It may also be designated according to the number of runs (e.g. three-run welding).
31 149
one-side welding
welding in which the weld is made from one side of the workpiece
31 150
shielding gas
protective gas used to prevent or reduce atmospheric contamination
31 151
simultaneous double side welding
welding in which the weld is made from both sides of the workpiece in one run simultaneously, each run consisting of one bead only
31 152
single-run welding
welding in which the weld is made or layer is deposited in one run NOTE The weld may consist of one or a number of beads.
BSI 2008
.
83
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 154
temporary weld
weld made to attach a piece or pieces to a weldment for temporary use in handling, shipping, or restraining the t during welding
31 155
thermal efficiency
for linear welds, ratio of heat divided by arc energy (see 10 064 and 32 116)
31 156
weave bead
bead that is produced with a weaving motion of the filler rod or welding tool
31 157
weave technique
welding technique where the run is produced by oscillating the torch transverse to the direction of welding (see Figure 68)
Figure 68
Weave technique
3 2
1 Key 1 Weld 2 Torch 3 Workpiece
No.
Term
Definition
31 158
weaving amplitude
half the weaving width
31 159
weaving frequency
number of oscillatory movements of filler rod or welding tool per unit time
31 160
weaving width
transverse extent of weaving
31 161
beam welding
fusion welding processes using a focused beam of high energy radiation
31 162
skip sequence skip welding; wandering sequence
welding sequence in which short lengths of run are spaced in scattered positions in predetermined order eventually to produce a continuous or intermittent weld, the lengths being laid in either longitudinal direction (see Figure 69)
Figure 69
84
.
BSI 2008
Example of skip sequence
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 163
block sequence block welding
welding sequence in which short lengths of the weld are each made by superimposing a number of runs up to the full or partial size of the weld to form a block before proceeding with the next block; these blocks may be adjacent or spaced (see Figure 70)
Figure 70
Examples of block sequences
No.
Term
Definition
31 164
chain intermittent weld
intermittent weld on each side of a t (usually fillet welds in T and lap ts) arranged so that the welds lie opposite to one another along the t
31 165
single-bevel butt weld
butt weld in the preparation for which the edge of one component is bevelled and the fusion face of the other component is at right angles to the surfaces of the first component (see Figure 50.15, Figure 50.16, Figure 50.19, Figure 50.24 and Figure 50.32)
31 166
double-bevel butt weld
butt weld in the preparation for which the edge of one component is double bevelled and the fusion face of the other component is at right angles to the surfaces of the first component (see Figure 50.21, Figure 50.23 and Figure 50.26)
31 167
flat face fillet weld
fillet weld in which the weld face is approximately flat
31 168
mitre fillet weld
flat face fillet weld in which the leg lengths are equal within the agreed tolerance
31 169
convex fillet weld
fillet weld in which the weld face is convex
31 170
concave fillet weld
fillet weld in which the weld face is concave
31 171
fusion spot weld
weld, other than a plug weld or slot lap t, produced by fusion welding at a spot in the workpiece through one or more thicknesses of overlapping parts (see Figure 50.31)
31 172
flush weld
weld in which the weld face follows approximately the contour of the parent material
31 173
tapered member chamfered member: deprecated
member whose thickness is tapered down to suit that of another member
31 174
closed t preparation
preparation in which the components to be ed are substantially in before welding
31 175
open t preparation
preparation in which the components to be ed are separated by a specific gap before welding BSI 2008
.
85
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
31 176
cruciform t
connection in which two flat plates or two bars are welded to another flat plate at right angles and on the same axis (see Figure 50.26 and Figure 50.27)
31 177
weld face
surface of a fusion weld exposed on the side from which the weld has been made (see Figure 52)
31 178
fusion face
surface of the parent metal to be melted during welding
31 179
root (of preparation)
1) In the preparation of V, U, J and bevel butt welds. zone in the neighbourhood of, and including, the gap 2) In a square butt weld with backing bar or strip. zone between the prepared edges adjacent to a backing bar or strip 3) In parts assembled for fillet welding. zone in the neighbourhood of the actual or projected intersection of the fusion faces (see Figure 71 and also term 31 126)
Figure 71
Roots of typical weld preparations
No.
Term
Definition
31 180
leg
width of a fusion face in a fillet weld
31 181
effective length
length of continuous weld of specified dimension
31 182
penetration bead
weld metal protruding through the root of a fusion weld made from one side only (see Figure 72)
Figure 72
86
.
Penetration bead
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
31 183
penetration run penetration
first run or of a multi-run weld whose penetration bead can be seen
31 184
molten pool weld pool
pool of liquid metal formed during fusion welding NOTE In electroslag welding the term includes the slag bath.
31 185
weaving
transverse oscillation of an electrode or of a blowpipe nozzle during the deposition of weld metal
31 186
chipping hammer
hand hammer designed for the removal of slag from weld deposits
31 187
transfer efficiency
degree to which allowing elements in a filler metal or electrode are transferred to the weld metal, usually expressed as the ratio of the percentage of the element in an undiluted weld metal pad to the percentage originally present in the filler wire or electrode NOTE Loss of alloying elements in this case is due to volatilization, oxidation or reaction with the flux and not that due to dilution.
31 188
shoe
part of an electro-slag or electro-gas welding machine that serves to retain the pool of molten metal and slag in the t
31 189
cross bar gap bar; slitter bar: deprecated
member in an electro-slag or electro-gas welding machine that es through the gap above the weld pool in order to the far-side shoe
31 190
end tapering
operation in which the end(s) of a run is gradually tapered to ensure that subsequent runs can be effected without incurring any lack of root or inter fusion
31 191
stringer bead
weld bead deposited without weaving motion of the electrode or filler material
31 192
maximum throat thickness: deprecated
dimension measured from the deepest point of the penetration in fillet welds or the extremity of the root run in butt welds to the highest point of the excess weld metal (see Figure 60, item 4) NOTE This is usually measured from a cross-section, but is not normally used in design or the specification of quality.
Subsection 32. relating only to arc welding No.
Term
Definition
32 001
arc welding
fusion welding in which heat for welding is obtained from an electric arc or arcs
32 002
metal-arc welding
arc welding using a consumable electrode
32 003
manual metal-arc welding MMA welding
manually operated metal-arc welding using a covered electrode
32 004
carbon-arc welding
arc welding using a carbon electrode or electrodes
32 005
metal active-gas welding MAG welding
gas-shielded metal-arc welding in which the shielding is provided by a chemically active gas
32 006
metal inert-gas welding MIG welding
gas-shielded metal-arc welding in which the shielding is provided by an inert gas, e. g. argon or helium
32 007
tungsten inert-gas welding TIG welding
gas-shielded arc welding using a non-consumable pure or activated tungsten electrode where the shielding is provided by a shroud of inert gas BSI 2008
.
87
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 008
submerged-arc welding SA welding
metal-arc welding in which one or more wire electrode(s) [or tubular-cored electrodes], or strip electrode(s) are used, the arc(s) being completely enveloped by molten slag which fuses from the granular flux that is deposited loosely
32 010
electro-gas welding
arc welding using a gas-shielded consumable electrode to deposit metal into a molten pool, retained in the t by cooled shoes which move progressively upwards as the t is made
32 011
arc spot welding
arc welding in which overlapping parts are ed by fusing through one component into the other and so producing a fusion weld at the faying surfaces
32 012
metal-arc spot welding
manual arc spot welding using a covered electrode
32 013
MIG spot welding inert-gas consumable electrode spot welding
arc spot welding using a bare consumable electrode with the arc and molten pool shielded by gas that is wholly or mostly inert
32 014
TIG spot welding inert-gas tungsten-arc spot welding
arc spot welding using a tungsten electrode with the arc and molten pool shielded by gas that is wholly or mostly inert
32 015
arc stud welding
arc welding process that uses an arc between a metal stud, or similar part, and the workpiece
32 016
electrode arc welding electrode
rod, tube or wire of metal or a rod of carbon between one end of which and either the work or another electrode the arc is formed NOTE This should not be confused with term 22 015.
32 017
non-consumable electrode
electrode that does not provide filler metal
32 018
consumable electrode
filler material that conducts the welding current
32 020
covered electrode
consumable electrode in the form of a rod consisting of a metallic core to which a covering has been applied
32 021
tubular cored electrode
wire electrode in a tubular form
32 022
cored electrode flux cored electrode flux-cored wire: deprecated
consumable electrode having a core of flux or other materials NOTE The term ‘‘flux’’ in this context is used in its ordinary engineering sense. The core is sometimes loosely described as flux, whether or not other materials are present.
32 023
metal cored electrode
metal cored electrode containing metal powder
32 024
rutile electrode
covered electrode in which the covering contains a high proportion of titanium dioxide
32 025
cellulosic electrode
covered electrode in which the covering contains a high proportion of cellulose
32 026
basic electrode low hydrogen electrode: deprecated
covered electrode in which the covering is based on calcium carbonate and fluoride
32 027
hydrogen controlled electrode covered electrode that, when used correctly, produces less than a specific amount of diffusible hydrogen in the deposit
32 028
iron powder electrode
covered electrode in which the covering contains a high proportion of iron powder giving a deposition efficiency of at least 100%
32 030
acid electrode
covered electrode in which the covering contains a high proportion of acid material
88
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 031
electrode touch type electrode
covered electrode with a special covering that enables it to be kept in with the parent material during welding to facilitate control of arc length
32 032
welding head
1) device used in automatic arc welding plants comprising an electrode feed mechanism and means for conveying current to the electrode NOTE It can include electrode straightening gear and can be stationary while the work is in motion or vice versa.
2) in resistance welding, device comprising the force generation and guiding system carrying an electrode holder, platen or electrode wheel head 32 033
arc voltage
voltage between electrodes or between an electrode and the work, measured at a point as near as practicable to the arc
32 034
striking voltage
minimum voltage at which any specific arc may be initiated
32 035
no-load voltage open circuit voltage
voltage, exclusive of any arc striking or arc stabilizing voltage, between the output terminals of a welding power source when the external welding circuit is open and when the rated supply voltage is applied to the input terminals
32 036
arc welding power source arc welding plant
equipment for supplying current and voltage and having the required characteristics suitable for arc welding and allied processes
32 037
constant-voltage welding power source
1) arc welding power source whose terminal voltage remains substantially constant between full load and no load 2) arc welding power source with a flat characteristic
32 038
drooping characteristic welding power source
arc welding power source with a drooping characteristic
32 040
welding converter
arc welding power source consisting of an electric motor and a d.c. welding generator
32 041
welding rectifier
arc welding power source consisting of a static converter for supplying direct current for welding from an a.c. supply
32 042
inverter welding power source
power source that converts d.c. to a.c., which is rectified to d.c. by a low-weight transformer
32 043
arcing time
time during which the welding arc is maintained
32 044
main arc power arc: deprecated
arc that supplies welding heat for arc welding
32 045
pilot arc
low-intensity arc to facilitate the striking of the main arc
32 046
gas shield
layer of gas surrounding the weld zone to facilitate the making of a weld
32 047
torch
device that conveys all services necessary to the arc for welding, cutting or allied processes (for example current, gas, coolant, wire electrode)
32 048
welding gun
torch with a handle substantially perpendicular to the torch body
32 050
plasma torch plasma gun: deprecated
arc welding torch using a non consumable electrode and having a gas nozzle producing a constricted plasma arc
32 051
torch angle
angle between the electrode axis and the longitudinal axis of the unwelded part of the t BSI 2008
.
89
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 052
electrode extension
distance between end of tube and end of wire electrode
32 053
metal transfer
transfer of metal across the arc from a consumable electrode to the molten pool
32 054
globular transfer
metal transfer which takes place as globules of diameter substantially larger than that of the consumable electrode from which they are transferred
32 055
spray transfer droplet transfer
metal transfer which takes place as a rapidly projected stream of droplets of diameter not larger than that of the consumable electrode from which they are transferred
32 056
particle transfer frequency
frequency with which metal globules or droplets are transferred across the arc from the end of a consumable electrode
32 057
dip transfer
method of metal-arc welding in which fused particles of the electrode wire in with the molten pool are detached from the electrode in rapid succession by the short-circuit current which develops every time the wire touches the molten pool
32 058
nominal electrode efficiency
for a covered electrode, ratio of the mass of weld metal deposited under standard conditions to the mass of nominal diameter core wire consumed
32 060
wire feed rate
length of wire consumed per unit time
32 061
stub end
part of an electrode used in manual metal-arc welding that is discarded after deposition of the electrode’s practicable length
32 063
wandering arc
arc that is unstable and does not maintain its directionality
32 064
pulsed MIG welding
MIG welding using a pulsed current
32 065
pulsed TIG welding
welding process in which a low background current maintains an arc with minimum heat input and a higher pulsed current occurring at a frequency of 1 Hz to 10 Hz; the pulse current melts a series of overlapping spots with very precise control of the heat input
32 066
plasma arc welding arc plasma welding
arc welding in which the heat for welding is produced with a constricted arc between either an electrode and the workpiece (a transferred arc); or between an electrode and the constricting nozzle (a non-transferred arc); plasma being generated by the hot ionized gases issuing from the orifice and supplemented by an auxiliary source of shielding gas
32 067
arc welding transformer
transformer designed to provide electrical energy for one or more welding arcs
32 068
d.c. welding generator
direct-current generator designed for providing electrical energy to one or more welding arcs
32 070
a.c. welding generator
alternating-current generator designed for providing electrical energy to one or more welding arcs
32 071
engine driven power source
arc welding set consisting of a generator and an engine, which are directly coupled, for supplying electrical energy for welding
32 072
static characteristic
relationship between the output current of a welding power source and the voltage across a practically non-inductive load connected to the output terminals
90
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 073
dynamic characteristic
change with time of voltage and current in response to alterations in load, as when initiating a weld
32 074
arc blow
lengthening or deflection of a welding arc caused by an asymmetric distribution of magnetic flux around the arc
32 075
arc length
distance from the tip of the welding electrode to the adjacent surface of the weld pool
32 076
gravity welding with covered metal-arc welding using an electrode ed by a electrode mechanism that allows the electrode to descend and move along the t under gravity
32 077
gas-shielded arc welding
arc welding in which the arc and molten pool are shielded from the atmosphere by an envelope of gas supplied from an external source
32 078
gas-shielded metal-arc welding
metal-arc welding using either a bare wire or cored electrode in which the arc and molten pool are shielded from the atmosphere by an envelope of gas supplied from an external source
32 080
micro-plasma arc welding
plasma arc welding at welding currents generally below 10 A
32 081
strip cladding
surfacing by automatic submerged-arc or gas-shielded arc welding in which the electrode is in the form of a strip
32 082
deposition efficiency metal recovery
ratio of the mass of weld metal deposited under specified conditions10) to the total mass of electrode consumed, exclusive of the stub end, expressed as a percentage
32 083
deposition coefficient
For a given electrode, mass of weld metal deposited under standard conditions per ampere/minute
32 084
effective electrode efficiency
For a covered electrode, ratio of the mass of weld metal deposited under standard conditions to the mass of actual core wire consumed
32 085
overall weld metal recovery
For covered electrodes, ratio of the mass of weld metal deposited under standard conditions to the total mass of the electrode tested
32 087
melting rate burn-off rate
1) In friction welding. rate of shortening of the components during application of the friction force 2) In arc welding. linear rate of consumption of a consumable electrode
32 089
backing gas
gas used for gas backing
32 090
narrow gap welding
fusion welding in which the gap between the workpieces is relatively narrow; it can be carried out by different metal-arc welding processes, e.g. metal-arc active gas welding, electrogas welding, etc.
32 091
plasma MIG welding
combination of MIG welding and plasma arc welding
32 092
powder plasma welding
plasma-arc welding with metallic powder feeding (accompanied by a figure)
32 093
pull technique
welding technique where the torch is pulled in the welding direction (accompanied by a figure in ISO 857-1) NOTE The torch angle is less than or equal to 90º.
10)
These conditions are normally specified by the electrode manufacturer. BSI 2008
.
91
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 094
push technique
welding technique where the torch is pushed in the welding direction (accompanied by a figure in ISO 857-1) NOTE The torch angle is greater than 908.
32 095
self-shielding tubular-cored arc welding Figure 73
metal-arc welding using a tubular-cored electrode without external shielding gas (see Figure 73)
Self-shielded tubular-cored arc welding
6
7
5
4
8
3
2 Key 1 Workpiece 2 Arc 3 Weld 4 Torch
1 5 6 7 8
tip Flux-cored electrode Wire feed rolls Power source
No.
Term
Definition
32 096
open arc welding
arc welding in which the arc is visible
32 097
controlled-arc welding
arc welding in which the electrode is fed to the arc at a rate controlled by the arc voltage to maintain a constant arc length
32 098
self-adjusting arc welding
metal-arc welding in which the electrode is fed at a constant speed while the arc length is maintained substantially constant by the inherent electrical characteristics of the welding current circuit
32 099
touch welding welding
metal-arc welding using a covered electrode, the covering of which is kept in with the parent metal during welding
32 100
parallel welding
arc welding using two electrodes connected in parallel to one power source and feeding the same weld run
32 101
multi-power welding
arc welding using two or more power sources, each connected to a separate electrode, which feed the same weld run
32 102
series arc welding
arc welding using two electrodes connected in series to one power source and which feed the same weld run
92
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 103
firecracker welding
metal-arc welding in which a covered electrode is or electrodes are laid on the parent metal; the arc is started between one end of the electrode and the work and travels along the work as the electrode melts
32 104
CO2 welding
metal-arc welding in which a bare wire electrode is used, the arc and molten pool being shielded with carbon dioxide
32 105
tungsten-arc spot welding
arc spot welding using a tungsten electrode
32 106
CO2 spot welding
arc spot welding using a consumable electrode in which the arc and molten pool are shielded from the atmosphere by carbon dioxide gas
32 107
atomic-hydrogen welding
arc welding in which molecular hydrogen, ing through an arc between two tungsten or other suitable electrodes, is changed to its atomic form and then recombines to supply the heat for welding
32 108
bare wire elecrode
solid wire or rod consumable electrode without covering or core
32 109
sheathed electrode
covered electrode having an external sheath
32 110
iron oxide electrode
covered electrode in which the covering contains a high proportion of iron oxide
32 111
alloy powder electrode
covered electrode in which the covering contains powders which, with the core wire, form an alloy when deposited
32 112
deep penetration electrode
covered electrode in which the covering aids the production of a penetrating arc to give deeper than normal fusion in the root of a t
32 113
hard facing electrode hard surfacing electrode
metal-arc welding electrode which, by virtue of the composition of the core or the covering or both, will deposit metal that is harder than the parent metal or can be hardened
32 114
guide tube
rigid tube that guides a filler wire or electrode but does not convey current
32 115
crater filler
device used in automatic and semi-automatic arc welding, or arc spot welding, that gradually reduces the welding current at the end of a weld run or just before the arc is extinguished, thereby preventing the formation of a crater
32 116
arc energy
in arc welding, amount of heat generated in the welding arc, referenced to a characteristic dimension, which in a linear weld is per unit length of weld (kJ/mm) NOTE Where the thermal efficiency (31 155) is less than unity, this will be greater than the heat input.
32 117
true arc voltage
voltage between the two ends of an electric arc
32 118
restriking voltage
transient voltage that develops between the electrode and the workpiece immediately following arc extinction, causing the arc to restrike
32 119
spark starting HF ignition
ignition of an arc by a high voltage high frequency spark applied across the arc gap
32 120
cyclic reignition voltage
In tungsten inert-gas welding, voltage between the electrode and work required to reignite an a.c. arc at the start of each half cycle
BSI 2008
.
93
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 121
spark reignition HF reignition
reignition of an a.c. arc, after extinction at zero current, by a high voltage high frequency spark applied across the arc gap
32 122
surge reignition
reignition of the arc, after extinction at zero current, by a voltage pulse applied across the arc gap when the electrode is positive, to produce a superimposed restriking voltage (see Figure 74)
Figure 74
Surge reignition
No.
Term
Definition
32 123
surge injector
device for maintaining an a.c. arc by surge reignition
32 124
HF unit HF ionizer: deprecated
high frequency electrical oscillator used to enable an arc to be initiated without between the electrode and the workpiece
32 125
drooping characteristic welding power source
arc welding power source, the terminal voltage of which drops to a value appreciably below the open circuit voltage after the arc has been struck
32 126
rising characteristic welding power source
arc welding power source the terminal voltage of which rises to a value slightly above the open circuit voltage after the arc has been struck
32 127
motor generator welding power source
arc welding power source consisting of a generator and an electric motor which are directly coupled, for supplying direct current for welding
32 128
rectifier welding power source arc welding power source consisting of a static converter for supplying direct current for welding from an a.c. supply
32 129
slope-led welding power source
arc welding power source, the volt-ampere characteristic of which can be selected from substantially flat to drooping to obtain the desired arc condition NOTE This should not be confused with term 22 127.
32 130
94
.
arcing time factor
BSI 2008
ratio of arcing time to the total time the supply is available for the arc
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 131
load current
current flowing for test purposes between the output terminals of an arc welding set (i.e. those to which the electrode and return leads are connected) through a resistance load
32 132
load voltage
voltage between the output terminals of an arc welding set when the load current is flowing
32 133
maximum welding current
maximum current that can be supplied from a single welding point at a specified load voltage
32 134
maximum continuous hand-welding current
maximum current that a single welding point is capable of supplying, without the plant exceeding the specified rise in temperature, when supplying an arc for an operator engaged continuously on manual metal-arc welding
32 135
typical electrode current
current at which an electrode may generally be used satisfactorily in a given position
32 136
electrode current range
range of current within which an electrode can be used satisfactorily
32 137
zero current pause
period of time in a half cycle between arc extinction and reignition during which no current flows
32 138
partial rectification
In tungsten inert-gas welding, loss of current during part of each half cycle when the electrode is positive; the arc, extinguished as in complete rectification, is ignited later in the same half cycle (see Figure 75)
32 139
complete rectification
In tungsten inert-gas welding, complete loss of current during each half cycle when the electrode is positive, due to failure of the arc to reignite (see Figure 75)
32 140
inherent rectification
In tungsten inert-gas welding, asymmetry between the positive and the negative half cycles of current that normally exists even when there is no partial or complete rectification (see Figure 75)
Figure 75
Types of rectification
BSI 2008
.
95
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 141
arc fan
fan-shaped flame associated with the atomic-hydrogen arc
32 142
TIG torch argon-arc torch
combined electrode holder and gas nozzle to convey current to the electrode and gas to shield the arc and weld area
32 143
MIG gun CO2 gun
combined electrode tube and nozzle to convey current to a wire electrode and gas to shield the arc and weld area
32 144
atomic-hydrogen torch
electrode holder carrying the electrodes and incorporating a means of supplying hydrogen to the arc in atomic-hydrogen welding
32 145
hydrogen valve
electrically operated on/off valve used in atomic-hydrogen welding to allow hydrogen to flow only when an arc has been struck
32 146
electrode positive
arc welding using direct current in which the electrode is connected to the positive pole of the supply NOTE This has sometimes been known in British practice as ‘‘straight polarity’’ and in American practice as ‘‘reversed polarity’’. For this reason both these are deprecated.
32 147
electrode negative
arc welding using direct current in which the electrode is connected to the negative pole of the supply NOTE This has sometimes been known in British practice as ‘‘reversed polarity’’ and in American practice as ‘‘straight polarity’’. For this reason both these are deprecated.
32 148
melt
flux used in submerged-arc welding
32 149
fused melt
glass-like material formed from the powdered flux during submerged-arc welding
32 150
burden
layer of melt and fused melt above the welding zone in submerged-arc welding
32 151
electrode efficiency electrode recovery; electrode yield
ratio of mass of all-weld metal deposited in the groove or on the workpiece to the mass of filler metal consumed, or to the core wire consumed in metal-arc welding with covered electrode, expressed as a percentage
32 152
stub-in
freezing of the electrode into the weld
32 153
burn-back
fusing of the electrode wire to the current tube by sudden lengthening of the arc in any form of automatic or semi-automatic metal-arc welding using a bare wire electrode
32 154
spatter loss
proportion of a consumable electrode or electrode core wire that is lost as spatter
32 155
striking plate
piece of material, kept close to the workpiece, on which an arc is struck before the electrode is transferred to the work
32 156
automatic stud welding equipment
stud welding equipment in which the complete sequence of operations is automatically controlled after being initiated
32 157
stud welding tool
appliance for holding, positioning and controlling the movement of the stud during stud welding, and for conveying pressure and current to it during the welding cycle
32 158
spatter shield
device on a stud welding tool to restrict the spread of weld spatter
32 159
stud welding controller
part of a stud welding equipment used to control the sequence of operations in the making of a stud weld
96
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
32 160
stud welding gun
stud welding tool intended to be held in the hand
32 161
lift
distance by which the stud is retracted from the parent metal in order to initiate the arc in stud welding
32 162
arc damper arc blow compensator
device in a stud welding tool for controlling the arc blow in the welding arc
32 163
granular flux filled stud
stud, hollow at the welding end, containing granular flux held in place by a metal cap
32 164
metallized fluxed stud
stud that is fluxed on the welding end by a metallization process
32 165
slug loaded stud
stud to the welding end of which is attached a solid slug or pellet of flux
32 166
fillet collar
ring of weld metal formed round the base of a welded stud
32 167
ferrule
sleeve or bush of refractory material surrounding the base of a stud during arc stud welding to protect and contain the molten metal and, where required, to shape the weld fillet
32 168
fluxed ferrule
sleeve, bush or cap containing material for fluxing purposes for attachment to the end of a stud
32 169
MIG pulsed-arc welding
metal inert-gas welding in which a background direct current arc is maintained to supply heat to the workpiece and electrode wire and a regular pulsed current of the same polarity (usually electrode positive) and of a higher peak value is applied to control metal transfer
32 170
TIG pulsed-arc welding
tungsten inert-gas welding in which a background direct current is maintained to preserve an ionized path for the arc and a regular pulsed current of the same polarity (usually electrode negative) is applied to control heat input to the workpiece
32 171
self-regulating arc-welding transformer
arc-welding transformer in which the voltage drop increases substantially with the secondary load current
32 172
self-regulating d.c. welding generator
d.c. welding generator in which the voltage drop increases substantially with the load current
32 173
braided electrode
covered electrode with the covering reinforced by a process of braiding
32 174
dipped electrode
covered electrode produced by single or multiple dipping of the core wire into a paste of flux
32 175
extruded electrode
covered electrode produced by extruding the flux on to the core wire
32 177
dense slag solid slag
slag of limited porosity that may exert mechanical pressure to produce a smooth weld face
32 178
porous slag
slag that has a honeycomb structure
32 179
friable slag
slag that crumbles easily to aid removal
32 180
fluid slag
slag with slow freezing properties that flows freely during deposition of an electrode
32 181
viscous slag
slag with quick freezing properties that does not flow freely during deposition of an electrode
BSI 2008
.
97
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
32 182
non-shielded welding
metal-arc welding using a cored electrode in which materials for controlling the quality of the weld metal are contained in the wire or core without the use of an external shielding
32 183
stick electrode
straight covered electrode for metal-arc welding having one end bare for insertion in an electrode holder
32 184
continuous covered electrode covered electrode supplied in coils for automatic welding, having a core wire surrounded by two or more helically wound wires which reinforce the covering and conduct current to the core wire
32 185
synergic pulsed MIG welding form of pulsed MIG welding using electronic control logic to determine the value of the pulse parameters and pulse frequency, according to the selected value of wire feed speed
32 186
A-TIG
TIG welding using an activating flux
32 187
tandem arc welding
arc welding using two power sources, each connected to one electrode wire and fed simultaneously into the same weld pod
32 188
twin wire welding
arc welding using two filler wires connected to one power source and delivered through a single tube
Subsection 33. relating only to gas welding No.
Term
Definition
33 001
gas welding
fusion welding, with or without filler metal, in which the heat for welding is produced by the combustion of a fuel gas or gases with an ixture of oxygen
33 002
oxy-acetylene welding
gas welding in which the fuel gas is acetylene NOTE Other fuel gases are also used with oxygen (i.e. butane, hydrogen and propane); in such cases appropriate alterations to the term and the definition are necessary.
33 003
neutral flame11)
33 004
reducing flame
33 005
carburizing flame
33 006
oxidizing flame
flame in which the first stage of combustion is complete, with no excess of oxygen in the cone visible at the nozzle orifice (see Figure 76) flame in which the portion used has a de-oxidizing effect 11)
Figure 76
11)
98
flame in which there is an excess of a carbonaceous fuel gas, resulting in a carbon-rich zone extending around and beyond the cone (see Figure 77 and Figure 78) flame in which there is an excess of oxygen, resulting in an oxygen-rich zone just beyond the cone (see Figure 79) Neutral oxy-acetylene flame
Neutral and carburizing flames are reducing in nature. .
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Figure 77
Carburizing oxy-acetylene flame
Figure 78
Carburizing oxy-acetylene flame for a hard surfacing application
Figure 79
Oxidizing oxy-acetylene flame
No.
Term
Definition
33 007
leftward welding forward welding
gas welding technique where the filler rod is moved ahead of the blowpipe in relation to the welding direction (see Figure 80)
33 008
rightward welding backward welding
gas welding technique where the filler rod is moved behind the blowpipe in relation to the welding direction (see Figure 81)
Figure 80
Leftward welding
Figure 81
Rightward welding
BSI 2008
.
99
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
33 010
welding blowpipe
welding torch in which a fuel gas is mixed with oxygen to produce a flame that can be controlled to be oxidizing, neutral or reducing
33 014
automatic quick-acting shut-off device
self-acting device which closes quickly e.g. when triggered by an acetylene explosion in the high pressure manifold pipework
33 015
backfire
retrogression of the flame into the blowpipe neck or body with rapid self-extinction
33 016
backflow
flowing back of the gas at the higher pressure into the hose of the gas at the lower pressure; this can be caused by the nozzle exit becoming blocked or restricted
33 017
blowing off the flame
detachment of the flame from the blowpipe nozzle; this may cause the flame to be extinguished
33 018
blowpipe with a single flow rate
blowpipe, which due to design gives a single nominal gas flow rate that can only be varied within narrow limits
33 019
blowpipe with multiple flow blowpipe giving a range of flow rates corresponding to a rates series of nozzles
33 020
blowpipe with nozzle mixing blowpipe with a nozzle that contains a mixer or an injector-mixer
33 021
blowpipe with preliminary mixer
cutting blowpipe in which the mixture of heating oxygen and fuel gas is ensured by the injectormixer located before the cutting nozzle
33 022
burst pressure
pressure which causes failure of, and consequential fluid loss through the component envelope
33 024
cylinder bundles
cylinder arrangements which are connected together for collective filling and emptying
33 025
excess flow cut-off valve
device which stops the gas flow in the event of flow exceeding a predetermined value
33 029
high pressure blowpipe
blowpipe in which the pressure of both the fuel gas and the oxygen/compressed air, measured immediately before the point of mixing, is higher than the pressure of the gas mixture, measured between the point of mixing and welding nozzle
33 031
hose assembly
assembly consisting of a hose tail inserted into the end of a hose and secured by a suitable hose clamp NOTE A typical hose assembly consists of: hose tail, hose, hose clamp.
33 032
hose clamp
device for fastening the hose on the hose tail
33 034
hose tail
end of a coupling device to be inserted into a hose
33 035
injector-mixer
device in which gas leaving an injector entrains and mixes with another gas which is at a lower pressure
33 036
low pressure blowpipe
blowpipe in which the fuel gas pressure, measured immediately before the mixing chamber, is lower than the pressure of the gas mixture, measured between the mixing chamber and welding nozzle
33 042
manual quick acting shut-off manually activated device to quickly stop the gas flow valve
100
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
33 044
mixer without injector action mixing systems in which the fuel gas and the oxidizing gas are discharged; the pressure in this channel is higher than the atmospheric pressure
33 046
multifunctional safety device device which incorporates two or more of the safety functions
33 048
non-return valve
valve that prevents the age of gas in the opposite direction to the normal flow
33 050
pressure-sensitive cut-off valve
device which stops the gas flow in the event of a back-pressure wave from the downstream side
33 051
pressure relief valve
device which automatically vents gas when the pressure exceeds some predetermined value and seals again when the pressure returns to within specified limits of that value
33 052
proof pressure
maximum pressure to which the equipment might be subjected in service
33 054
quick-action coupling with shut-off valve
device enabling a rapid coupling or uncoupling under pressure of two elements and/or hoses, which automatically releases the gas flow during connection and prevents the escape of gas when disconnected
33 060
sustained backfire
retrogression of the flame into the blowpipe neck or body, the flame remaining alight NOTE This manifests itself either as ‘‘popping’’ or ‘‘squealing’’ with a small pointed flame issuing from the nozzle orifice, or as a rapid series of minor explosions inside an overheated nozzle.
33 061
temperature sensitive cut-off device which stops the gas flow when a predetermined device temperature is exceeded
33 062
assembled hose
length of hose fitted at each end with a hose assembly
33 063
blowpipe with a fixed mixer
blowpipe with multiple flow rates which are varied by adjusting the feed pressures
33 065
blowpipe with a variable injector
blowpipe with multiple flow rates which are varied by means of a device for adjustment of the injector cross-section
33 066
blowpipe with an interchangeable injector
blowpipe with multiple gas flow rates which are varied by changing the injector; the latter often forms a single component with the outlet nozzle
33 067
blowpipe with multiple flow blowpipe with multiple flow which is varied by means of the rates adjusted by means of adjustment valves gas control valves
33 068
closing pressure
stablilized outlet pressure (stabilization after flow ceases) one minute after stopping the standard discharge
33 069
discharge of the relief valve
minimum discharge (rate of unit volume) of the relief valve
33 070
external gas leakage
undesired escape of gas from a product to the atmosphere
33 071
internal gas leakage
undesired escape of gas between chambers with different pressures inside a product
33 072
manifold systems
systems in which two or more single cylinders or bundles are coupled on the high pressure side for collective gas withdrawal
33 073
maximum operating pressure maximum pressure to which the equipment might be subjected in service
BSI 2008
.
101
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
33 074
maximum permissible external leakage rates
total leakage rates for a complete product including inlet connection
33 076
nominal outlet pressure
downstream pressure corresponding to a defined flow (standard discharge defined either by its class of equipment or in the technical leaflets)
33 077
nominal inlet pressure
inlet pressure defined by the manufacturer and for which the equipment is intended to work
33 078
routine manufacturing test
revealing test where all manufactured products are checked by the manufacturer in order to and maintain the product quality level
33 079
safety device
device for welding equipment which averts risk in case of misuse or malfunction of the downstream gas welding equipment
33 080
spontaneous ignition temperature
in the absence of any energy source, temperature at which spontaneous ignition of a sample occurs in oxygen
33 081
standard discharge
discharge (rate of unit volume) specified by the relevant standard or by the manufacturer under specified conditions
33 082
type test
tests of an equipment to prove conformance to the specific standard
33 083
upstream pressure for type testing
pressure equal to twice the nominal outlet pressure plus 1 bar
33 084
all-position rightward welding
welding technique in which the flame and filler rod are directed towards the unwelded part of the t, the welding rod being directed in between the flame and the weld (see Figure 82)
33 085
surface fusion welding semi-fusion welding: deprecated
gas welding in which a carburizing flame is used to melt the surface of the parent metal, which then unites with molten metal from a suitable filler rod NOTE This application is used for hard facing, building-up and the like.
Figure 82
102
.
All-position rightward welding
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Subsection 34. relating only to electron beam welding No.
Term
Definition
34 001
electron beam welding EB welding
fusion welding in which the heat for welding is generated by the impact of a focused beam of electrons
34 002
electron gun
device for producing electrons and the means by which they are accelerated and focused on to the workpiece
34 003
low voltage electron gun
electron gun with an accelerating voltage up to and including 40 kV
34 004
medium voltage electron gun electron gun with an accelerating voltage greater than 40 kV up to and including 60 kV
34 005
high voltage electron gun
electron gun with an accelerating voltage greater than 60 kV
34 006
beam current
current flowing between the cathode and the anode of an electron gun, expressed in milliamperes
34 007
beam power
product of accelerating voltage and beam current, expressed in kilowatts
34 008
beam power density specific beam power
value expressed in kilowatts per unit area, obtained by dividing the beam power by the cross-sectional area of the electron beam at a specified position
34 009
working distance
distance between a reference point, usually the lower member of the electron gun, and the point at which the beam impinges on the workpiece
34 010
beam pulsing
production of a non-continuous electron beam
34 011
accelerating voltage
voltage between the cathode and the anode that accelerates the electrons
34 012
beam current pulsing
in electron beam welding, intentional periodic variation of the beam current
34 013
beam deflection
in electron beam welding, electromagnetic deflection of the beam from the gun axis
34 014
beam oscillation
in electron beam welding, intentional periodic deflection of the beam, achieved by electromagnetic forces
34 015
spot position
in electron beam welding, position of the electron beam when it impinges on the workpiece surface with respect to a system of co-ordinates perpendicular to the axis of the beam
34 016
electron beam welding machine
apparatus for providing and controlling the energy and including if necessary the associated work manipulating system for making an electron beam weld
34 017
directly heated gun
electron gun in which the cathode is heated directly by the filament current (see Figure 83 and Figure 84)
34 018
diode gun
electron gun, directly heated, with two electrodes wherein the beam current is adjusted by varying the cathode temperature, accelerating voltage or electrode spacing or any combination of these variables (see Figure 83)
34 019
triode gun
electrode gun, directly heated, with three electrodes wherein the beam current is usually controlled by a grid electrode but is dependent on the cathode temperature, the accelerating voltage and perveance (see Figure 84)
BSI 2008
.
103
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
34 020
back-bombarded gun
electron gun in which the cathode is heated by bombardment with electrons from a separated primary gun (see Figure 85)
104
.
BSI 2008
Figure 83
Diagrammatic representation of a diode gun
Figure 84
Diagrammatic representation of a triode gun
BRITISH STANDARD
BS 499-1:2009
Figure 85
Diagrammatic representation of a back-bombarded gun
No.
Term
Definition
34 021
cathode filament
source from which electrons are emitted
34 022
filament current heater current
current that heats the cathode to a temperature to produce the required electron emission
34 023
grid electrode bias electrode
electrode that controls the magnitude of the beam current and which is negative in respect to the cathode of the electron gun
34 024
cathode shield field electrode
electrode that surrounds the cathode and is at the same potential
34 025
perveance
geometric characteristic, G, of an electron gun that relates the current and accelerating voltage according to the formula:
where: I is the beam current (in amperes); V is the accelerating voltage (in volts) 34 026
bias voltage
voltage applied between the cathode and the grid electrode to control the magnitude of beam current independently of accelerating voltage and perveance changes
34 027
beam current control
means of adjusting the beam current by controlling the bias voltage or the cathode temperatures or by changing the perveance value
34 028
beam deflector deflection coils
electromagnetic means of deflecting the electron beam
BSI 2008
.
105
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
34 029
focusing lens
magnetic coils or electrostatic devices which provide the field for focusing the electron beam
34 030
focus control
device to control the magnitude of the current or voltage in the focusing lens
34 031
optical viewing system
means for viewing the point of beam impingement by looking down the path of the electron beam
34 032
full vacuum system hard vacuum system
electron beam welding machine, the work chamber and electron gun of which operate at a vacuum of better than 5 6 10–4 mbar (5 6 10–2 Pa)
34 033
partial vacuum system soft vacuum system
electron beam welding machine with a separately pumped electron gun, the work chamber of which operates at a vacuum in the range 5 6 10–3 mbar to 5 6 10–1 mbar (5 6 10–1 Pa to 50 Pa)
34 034
out of vacuum system non-vacuum system
electron beam welding machine with a separately pumped electron gun in which the electron beam is transmitted via a specially designed orifice to the workpiece in an environment at atmospheric pressure
34 035
separately pumped electron gun
electron gun pumped to a vacuum better than 1 6 10–4 mbar (1 6 10–2 Pa) irrespective of the pressure surrounding the workpiece
34 036
beam spinning
use of magnetic deflection of the beam to cause it to describe a circular path in order to redistribute the energy profile, usually the frequency of rotation being in the range 50 Hz to 5 000 Hz
34 037
focusing lens current
In electron beam welding, current ing through the focusing lens coil
Subsection 35. relating only to light radiation welding No.
Term
Definition
35 001
light radiation welding
fusion welding in which the heat for fusion is produced by an optically focused beam of radiation, welding being carried out in a vacuum or under the protection of a shielding gas or under normal atmospheric conditions, generally without the addition of a filler metal
35 002
laser welding
fusion welding in which the heat for fusion is produced by a coherent beam of monochromatic radiation from a laser
35 003
laser
equipment for producing a coherent beam of monochromatic radiation NOTE The word laser is derived from Light Amplification by Stimulated Emission of Radiation.
35 004
solid state laser
laser in which the beam is generated by a solid medium, e.g. yttrium aluminium garnet
35 005
gas laser
laser in which the beam is generated by an activated gas, e.g. CO2
35 006
focal length
distance between the optical centre of the focusing lens and the position of the focal spot
106
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
35 007
focal spot
part of the beam beyond the lens system where the beam comes to a minimum cross-sectional area
35 009
arc image welding
light radiation welding in which the heat for fusion is produced by a non-coherent beam of radiation of a particular frequency band, the source of light being an arc
Subsection 36. relating only to aluminothermic welding No.
Term
Definition
36 001
aluminothermic welding thermit welding
flow welding whereby the welding heat is obtained from reacting a mixture of metal oxides with finely ground aluminium powder whose ignition produces an exothermic reaction in which the molten metal produced is the filler material
36 002
thermit mixture
mixture of metallic oxides and finely divided aluminium, whose ignition produces an exothermic reaction, reducing the mixture to molten metal and slag accompanied by intense heat NOTE The composition of the thermit mixture is varied to suit the type of steel or cast iron to be welded.
36 003
ignition powder
readily ignitable mixture, usually of powdered aluminium and oxidizing material, used for initiating the reaction in aluminothermic welding
36 004
igniter
device used in place of ignition powder
36 005
thermit crucible
vessel in which the thermit reaction takes place, with a hole in the bottom through which the molten metal es (see Figure 86)
36 006
stone
ring of refractory material, usually pressed magnesite, built into the bottom of a thermit crucible for the reception of a thimble (see Figure 86)
36 007
thimble
renewable ring of refractory material, usually magnesite, inserted in a stone to act as a nozzle when the crucible is tapped (see Figure 86)
36 008
tapping pin
metal plug closing the hole in a thimble (see Figure 86)
36 009
plugging material
refractory material placed on top of a tapping pin to prevent the pin from melting (see Figure 86)
36 010
wax pattern
pattern formed of wax that is moulded around the parts to be welded, and which becomes the foundation of a mould and is then melted out prior to preheating
36 011
mould
receptable that may be either formed round the parts to be welded or preformed and placed round them to receive the molten metal from the crucible (see Figure 86) NOTE The mould material is usually a mixture of natural or synthetic high-silica sand and plastic clay.
36 012
preheating gate
opening in a mould to facilitate preheating of parts to be ed by aluminothermic welding (see Figure 86)
36 013
pouring gate
opening in a mould into which the molten metal is poured from the crucible (see Figure 86) BSI 2008
.
107
BS 499-1:2009
BRITISH STANDARD
Figure 86
Basic equipment for aluminothermic welding
No.
Term
Definition
36 014
riser
reservoir of molten metal above the highest point of an aluminothermic weld to compensate for shrinkage and to collect scale and other impurities arising during welding (see Figure 86)
36 015
slag basin
depression in the top of a mould to contain a portion of the slag (see Figure 86)
36 016
slag pot
vessel to receive slag overflowing from the slag basin (see Figure 86)
36 017
slag shute
channel to conduct slag from the slag basin into the slag pot (see Figure 86)
36 018
collar
weld metal projecting around the periphery of a weld made by aluminothermic welding (see Figure 86)
108
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Subsection 37. relating only to electro-slag welding No.
Term
Definition
37 001
electro-slag welding
fusion welding utilizing the combined effects of current and electrical resistance in a consumable electrode(s) and a conducting bath of molten slag, through which the electrode(s) es into a molten pool, both the pool and slag bath being retained in the t by cooled shoes which move progressively upwards; after an initial arcing period, the end of the electrode is covered by the rising slag, and melting then continues until the t is completed (see Figure 87)
37 002
consumable wire guide consumable nozzle
wire guide, which may be coated or uncoated, made of material similar in composition to that being welded and progressively consumed to form part of the weld metal
Figure 87
Electro-slag welding
Key 1 Plates to be welded 2 Shoes 3 Molten slag 4 Electrode 5 Molten metal 6 Finished weld
No.
Term
Definition
37 003
cooled shoe
metal shoe, having ages for the cooling medium, that s the molten pool and which is moved upwards as welding progresses
37 004
starting block
piece of metal that is placed at the bottom of the t preparation and used to strike the starting arc and which s the initial molten pool
37 005
electro-slag welding flux
flux that, when molten, forms a slag pool of controlled electrical conductivity which melts the filler metal ing through and protects the molten weld pool BSI 2008
.
109
BS 499-1:2009
BRITISH STANDARD
Section 4. relating to braze welding and brazing Subsection 40. relating only to braze welding No.
Term
Definition
40 001
braze welding
ing of metals using a technique similar to fusion welding and a filler metal with a lower melting point than the parent metal, but neither using capillary action as in brazing nor intentionally melting the parent metal
40 002
bronze welding
form of braze welding in which copper-rich filler metal is used NOTE The term ‘‘bronze’’ is not used here in the ordinary metallurgical sense.
40 003
gas fluxing
method of supplying a flux in gas form to the t during braze welding NOTE The flux, originally liquid, is generally entrained by the fuel gas from a dispenser and es through the flame to the t.
40 004
bronze filler metal bronze welding rod
filler metal used for bronze welding, consisting basically of copper and zinc, but can also contain nickel, manganese or other metals NOTE The term ‘‘bronze’’ is not used here in the ordinary metallurgical sense.
40 005
bell butt t
t between two pipes of similar diameter, in which one pipe end is swaged out to receive the end of the other pipe (see Figure 88)
40 006
diminishing bell butt t
t between two pipes of different diameters, in which the end of the smaller pipe is swaged out to fit the bore of the larger pipe (see Figure 89)
Figure 88
Bell butt t
Figure 89
Diminishing bell butt t
No.
Term
Definition
40 007
branch T saddle t
t between a branch pipe and a main pipe set at 90º to each other, the end of the branch pipe being shaped to fit snugly against the main pipe
110
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
40 008
short bell branch t
branch t in which the metal round a hole in a main pipe is swaged out to receive the swaged end of a branch pipe (see Figure 90)
40 009
air-acetylene blowpipe: bunsen type
blowpipe incorporating an open injector-mixer in the blowpipe shank
40 010
air-acetylene blowpipe: high temperature type
blowpipe incorporating an open injector-mixer in the nozzle
40 011
bond weld
weld made between a stranded flexible copper conductor and a steel rail to ensure electrical conductivity NOTE Bonds are installed at rail ts, a weld being made at one end of the bond to one rail and at the other end of the bond to the other rail.
Figure 90
Short bell branch t
Subsection 41. relating only to brazing No.
Term
Definition
41 001
brazing
process of ing generally applied to metals in which, during or after heating, molten filler metal is drawn into or retained in the space between closely adjacent surfaces of the parts to be ed by capillary attraction NOTE In general the melting point of the filler metal is above 450 ºC, but always below the melting temperature of the parent material.
41 002
resistance brazing
brazing in which the filler metal is usually preplaced and heat is produced by: a) the age of an electric current between the parts to be ed, as in resistance welding; or b) the age of an electric current, generally through carbon electrodes in with the parts to be ed NOTE Most of the heat required for brazing is generated externally within the electrode material and is transmitted to the t by thermal conduction. BSI 2008
.
111
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
41 003
dip brazing
brazing in which a workpiece is partly or totally immersed in a bath of molten brazing alloy which is covered by a layer of molten flux
41 004
flame brazing torch brazing: deprecated
brazing in which heat is obtained from a gas flame from a blowpipe
41 005
furnace brazing
brazing in which the workpiece complete with preplaced filler metal is raised to brazing temperature in a furnace which may contain a protective atmosphere
41 006
induction brazing
brazing in which heat is obtained by inducing high-frequency electric current within the material in the neighbourhood of the t NOTE A protective atmosphere may be used.
41 007
salt bath brazing
brazing in which heat is obtained by immersing the workpiece complete with preplaced filler metal in a bath of molten salt of suitable melting point NOTE The salt used can act as a flux.
41 008
flux-dip brazing
salt bath brazing in which the salt is a flux
41 009
brazing alloy
filler metal used in brazing
41 010
spelter
brazing alloy consisting nominally of 50% copper and 50% zinc NOTE The term ‘‘spelter’’ is not used here in the ordinary metallurgical sense.
41 011
stopping-off agent
inert paint-like compound, usually based on a refractory oxide, applied adjacent to the t to control the undesirable spread of molten brazing alloy and prevent it from adhering to adjacent surfaces
41 012
vacuum brazing
brazing in which the workpiece, complete with preplaced filler metal, is raised to brazing temperature in a vacuum
41 013
braze metal
all the metal taken into the molten state, i.e. filler metal plus dissolved parent metal, during brazing
41 014
post-braze diffusion treatment
heat treatment where diffusion, additional to that inherent in the normal brazing process, is made to take place between the braze metal and the parts to be ed, either to improve the strength of the t or to raise the remelt temperature of the t NOTE This can be carried out either as an extension of the brazing cycle or as a separate treatment.
41 015
112
.
controlled atmosphere brazing
BSI 2008
brazing in which the workpiece, complete with preplaced filler metal, is raised to brazing temperature in a chamber containing a controlled mixture of gases
BRITISH STANDARD
BS 499-1:2009
Section 5. relating to testing NOTE In relating to testing ‘‘test piece’’ and ‘‘test specimen’’ may be used interchangeably, the choice being made according to the custom prevailing in the particular area of industry involved.
50 001
test piece; test specimen test coupon: deprecated
portion detached from a welded component or a welded t and prepared as required for testing
50 002
test specimen
part or portion cut from the test piece in order to perform a specified destructive test
50 003
all-weld test piece all-weld test specimen
test specimen that is composed only of deposited metal over the portion to be tested
50 004
transverse bend specimen
test specimen for a bend test that is transversely bisected by the portion of the weld included in it
50 005
longitudinal bend specimen
test specimen for a bend test that is longitudinally bisected by the portion of the weld included in it
50 006
face bend test
bend test in which one side of the weld specimen, as described in a) to c), is in tension: a) the side opposite that containing the root or opposite that to which the root is nearer; b) either weld face when the root is central; c) the outer side of a pipe or tube in welds made with pressure
50 008
root bend test
reverse bend test in which the root of the weld is on the tension side
50 009
side bend test
bend test in which the face of a transverse section of the weld is in tension
50 010
cracking test
test to determine the susceptibility to cracking of the weld metal or parent metal
50 011
hot cracking test solidification cracking test
test to determine the tendency of a welded t to develop hot cracks
50 012
peel test slug test; plug test
destructive test in which a resistance welded lap t is tested by applying a peel force which results in stresses mainly in the thickness direction of the weld
50 014
root bend specimen of butt weld
test specimen used in a root bend test for a butt weld
50 015
side bend specimen of test specimen used in a side bend test for cladding without a cladding without a butt weld butt weld
50 016
side bend test specimen of butt weld
test specimen used in a side bend test for a butt weld
50 020
testing level
degree of thoroughness and selection of parameter settings with which an NDT method is applied
50 021
testing organization
internal or external organization carrying out the destructive or non-destructive testing
50 023
face bend test specimen of butt weld
test specimen used in a face bend test for a butt weld
50 024
face bend test specimen of test specimen used in a face bend test for cladding without a cladding without a butt weld butt weld
BSI 2008
.
113
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
50 025
side bend test specimen of cladding with a butt weld
test specimen used in a side bend test for cladding with a butt weld
50 026
face bend test specimen of cladding with a butt weld
test specimen used in a face bend test for cladding with a butt weld
50 027
macroscopic examination
examination of a test specimen by the naked eye, or under low magnification, with or without etching
50 028
microscopic examination
examination of a test specimen by microscope with a magnification normally within 50 to 500 times, with or without etching
50 029
destructive testing
testing to detect internal or external imperfections, or assess mechanical or metallurgical properties by mechanical means, which generally result in the destruction of the material
50 030
non-destructive testing
act of determining the suitability of some material or component for its intended purpose using techniques that do not affect its serviceability
50 031
linear indication
In non-destructive testing, indication having a length greater than three times its width
50 032
non-linear indication
In non-destructive testing, indication having a length less than or equal to three times its width
50 033
object-to-film distance
In radiography, distance between the radiation side of the test object and the film surface, measured along the central axis of the radiation beam
50 034
penetrated thickness
In radiography, thickness of material penetrated by the radiation beam
50 035
projected area
area where imperfections distributed along the volume of the weld under consideration are imaged two-dimensionally
50 036
recording level
In non-destructive testing, evaluation level from which an indication is recorded
50 037
source size
In radiography, size of the radiation source
50 038
source-to-film distance
In radiography, distance between the radiation source and the film, measured in the direction of the beam
50 039
source-to-object distance
In radiography, distance between the radiation source and the source side of the test object, measured along the central axis of the beam
50 040
run-on test plate
test piece made by adding plates to the beginning of a t to give an extension of the weld for test purposes
50 041
run-off test plate
test piece made by adding plates to the end of a t to give an extension of the weld for test purposes
50 042
transverse tensile specimen
test specimen for a tensile test that is transversely bisected by the portion of the weld included in it
50 043
reverse bend test
bend test in which the face other than that specified for a face bend test is in tension
50 044
guided bend test
bend test made by bending the specimen round a specific former
50 045
controlled bend test
guided bend test in which special means are incorporated in the bending apparatus so that the specimen follows the shape of the former during bending
114
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
50 046
free bend test
bend test made without using a former
50 047
restrained weld test
cracking test in which the parts to be welded are secured to prevent all controllable movement during and after welding
50 048
U-tensile test
method of tensile testing spot or projection welds; after welding, the test plates are bent in a U shape (see Figure 91) and the specimen is then pulled apart
Figure 91
U-tensile test specimen
No.
Term
Definition
50 049
nick-break test
fracture test in which a specimen is broken from a notch cut at a predetermined position where the interior of the weld is to be examined
50 050
cruciform test piece; cruciform test specimen
1) flat plate to which two other flat plates are welded at right angles and on the same axis [see Figure 92a)] 2) flat plate to which two bars are welded at right angles and on the same axis [see Figure 92b)] 3) transverse section cut from the middle of 1) at right angles to the weld direction (see Figure 93)
Figure 92
Cruciform test pieces
BSI 2008
.
115
BS 499-1:2009
BRITISH STANDARD
Figure 93
Method of obtaining cruciform test specimen
No.
Term
Definition
50 051
cruciform test
test in which a cruciform test specimen is tested in tension
50 052
tongue-bend test specimen
portion so cut in two straight lengths of pipe ed by a butt weld as to produce a tongue containing a portion of the weld; the cuts are made so that the tongue is parallel to the axis of the pipes and the weld is tested by bending the tongue round a former (see Figure 94)
Figure 94
116
.
Tongue-bend test specimen
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
50 053
flattening test
test in which a welded pipe t is flattened until the internal walls are a specified distance apart
50 054
cross tension test
mechanical test in which a spot welded t between overlapping sheets is tested by stressing normal to the faying surface
50 055
shear test piece; shear test specimen
1) test piece of overlapping plates incorporating an agreed number of spot or projection welds (usually not more than three) (see Figure 95) NOTE This should not be confused with a shear test piece used for other purposes.
2) test piece as described in 1) prepared for testing in a tensile test machine by drilling out or otherwise rendering ineffective those welds not to be tested Figure 95
Shear test piece
No.
Term
Definition
50 056
pillow test
test, usually for seam welding, in which two plates of similar dimensions are placed flat on top of one another so that the edges approximately coincide; they are then welded together and hydraulic pressure is applied between the sheets causing them to form a ‘‘pillow’’
50 057
peaking
deviation from the desired curvature of a bend test specimen caused by differences in mechanical properties of parts of the specimen
BSI 2008
.
117
BS 499-1:2009
BRITISH STANDARD
Section 6. relating to weld imperfections No.
Term
Definition
60 001
imperfection
discontinuity in the weld or a deviation from the intended geometry NOTE Imperfections are, e.g. cracks, lack of penetration, porosity, slag inclusions.
60 002
metallurgical deviation
in welding, changes in the mechanical properties and/or metallurgical structure of the weld metal or heat affected zone compared to the properties of the parent metal
60 003
excessive penetration
NOTE Alternative term for ‘‘excess penetration’’ (see 60 040).
60 004
incompletely filled groove
continuous or intermittent channel in the surface of a weld, running along its length, due to insufficient weld metal NOTE The channel can be along the centre or along one or both edges of the weld. (see Figure 96)
Figure 96
Incompletely filled groove
No.
Term
Definition
60 005
undercut
irregular groove at a toe of a run in the parent metal, or in previously deposited weld metal, due to welding (see Figure 97) Figure 97
Undercut
No.
Term
Definition
60 006
continuous undercut
undercut of significant depth without interruption
60 007
intermittent undercut
short lengths of undercut, intermittent along the weld
60 008
overlap cold lapping
imperfection at a toe or root of a weld caused by metal flowing on to the surface of the parent metal without fusing to it
60 009
evaluation level
test level above which an indication is evaluated
60 010
surface pitting
imperfection in the surface of the parent metal usually in the form of small depressions
118
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
60 011
crack
linear discontinuity produced by fracture NOTE Cracks may be longitudinal, transverse, edge, crater, centreline, fusion zone, underbead, weld metal or parent metal.
60 012
hot crack solidification crack
material separations occurring at high temperatures along the grain boundaries (dendrite boundaries) when the level of strain and the strain rate exceed a certain level
60 013
cold crack
local rupture (intergranular or transgranular) appearing as a result of a critical combination of microstructure, stress and hydrogen content
60 014
lack of fusion
lack of union in a weld: a) between weld metal and parent metal, or b) between parent metal and parent metal, or c) between weld metal and weld metal
60 015
lack of sidewall fusion
lack of union between weld metal and parent metal at a side of a weld (see Figure 98)
60 016
lack of root fusion
lack of union at the root of a t (see Figure 99)
Figure 98
Lack of sidewall fusion
Figure 99
Lack of root fusion
No.
Term
Definition
60 017
lack of inter-run fusion
lack of union between adjacent runs of weld metal in a multi-run weld (see Figure 100)
Figure 100
Lack of inter-run fusion
No.
Term
Definition
60 018
incomplete penetration
failure of weld metal to extend into the root of a t (see Figure 101)
Figure 101
Incomplete root penetration
BSI 2008
.
119
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
60 019
solidification crack
hot crack formed during solidification from the liquid phase of weld metals NOTE It usually extends up to the surface of the weld metal, but sometimes can be subsurface.
60 020
inclusion
slag, flux, oxide, copper, tungsten or other foreign matter entrapped during welding; the defect is usually more irregular in shape than a gas pore; inclusions can be linear, isolated or clustered in their formation
60 021
linear inclusion slag line
inclusion of linear form situated parallel to the axis of a weld
60 022
solid inclusion
solid foreign substances entrapped in the solid metal
60 023
oxide inclusion
metallic oxide entrapped during welding
60 024
tungsten inclusion
inclusion of tungsten from the electrode in tungsten inert-gas welding
60 025
copper inclusion
inclusion of copper due to the accidental melting of the tube or nozzle in self-adjusting and controlled-arc welding, or to pick-up by between the copper nozzle and the molten pool in tungsten inert-gas welding
60 026
gas pore
spherical cavity, generally under 1.5 mm in diameter, formed by entrapped gas during the solidification of molten metal
60 027
gas cavity
cavity formed by entrapped gas
60 028
porosity
group of gas pores
60 029
indication
in non-destructive testing, representation or signal from a discontinuity
60 030
uniformly distributed porosity porosity distributed in a substantially uniform manner throughout a weld
60 031
localized porosity
porosity confined to a small area of a weld
60 032
linear porosity
string of gas pores situated parallel to the axis of a weld
60 033
elongated cavity
cavity occurring at the root of a weld due to the use of unstable arc conditions
60 034
shrinkage cavity
cavity due to the shrinkage of metal whilst in a plastic condition
60 035
wormhole pipe: deprecated
elongated to tubular cavity formed by entrapped gas during the solidification of molten metal
60 036
burn-through melt-through
localized collapse of the molten pool due to excessive penetration, resulting in a hole in the weld run
60 037
internal imperfection
imperfection that is not open to a surface or not directly accessible
60 038
systematic imperfection
imperfections that are repeatedly distributed in the weld over the weld lengths to be examined
60 039
stray arc
damage on the parent material resulting from the accidental striking of an arc away from the weld
60 040
excess penetration
excess weld metal protruding through the root of a fusion weld made from one side only (see Figure 102)
60 041
root concavity suck-back; underwashing
shallow groove that may occur in the root of a butt weld (see Figure 103)
120
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Figure 102
Excess penetration bead
No.
Term
Definition
60 042
shrinkage groove
shallow groove caused by contraction in the metal along each side of a penetration bead (see Figure 104)
Figure 104
Figure 103
Root concavity
Shrinkage groove
No.
Term
Definition
60 043
metal run-out
molten metal inadvertently lost from a weld by gravitational flow NOTE The term is used mainly in submerged-arc welding, where the effect arises from incorrect edge preparation.
60 044
sagged weld
weld in which the parent metal has been excessively softened during welding allowing the weld and adjacent parent metal to sag
60 045
excessive dressing underflushing
reduction in metal thickness caused by the removal of the surface of a weld and adjacent areas to below the surface of the parent metal
60 046
grinding mark
grooves in the surface of parent metal or of a weld made by a grinding wheel or surfacing tool
60 047
tool mark chipping mark
indentation in the surface of parent metal or of a weld, resulting from the application of a tool, e.g. a chipping tool, in preparation or dressing
60 048
hammer mark
indentation in the surface of parent metal or of a weld due to a hammer blow
60 049
torn surface
surface irregularity due to the breaking off of temporary attachments
60 050
slag trap
configuration in a t or t preparation that may lead to the entrapment of slag
60 051
blowhole
cavity, generally over 1.5 mm in diameter, formed by entrapped gas during the solidification of molten metal
60 052
crater pipe
depression due to shrinkage at the end of a run where the source of heat was removed
60 053
puckering
formation of an oxide-covered weld run or bead with irregular surfaces and with deeply entrained oxide films, that can occur when materials forming refractory oxides (e.g. aluminium and its alloys) are being welded
BSI 2008
.
121
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
60 054
fish eye
small bright area of cleavage fracture, caused by the presence of hydrogen, that is visible only on the fractured surface of weld metal
60 055
flat spot
area in a flash weld, revealed by breakage of the t, that has a shiny or relatively very smooth appearance and is roughly circular in shape with perhaps narrow streaks radiating from it
60 056
intrusion
projection of fused metal extending into the heat-affected zone of a resistance weld; an oxide or slag inclusion at the edge of a manual metal arc weld
60 057
lamellar tear
sub-surface crack in wrought parent material orientated parallel to the fusion boundary but located in or just beyond the heat affected zone, characterized by a series of decohered non-metallic inclusions linked by tearing in a stepwise morphology NOTE This tearing is the result of thermal welding strains in the through-thickness direction in material which has low throughthickness ductility due to the presence of such inclusions in the rolling plane. It is usually associated with cruciform, T and corner ts.
122
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Section 7. relating to cutting Subsection 70. relating to more than one subsection No.
Term
Definition
70 001
stack cutting
thermal cutting of a stack of plates usually clamped together
70 002
oxygen-arc cutting
thermal cutting in which ignition temperature is produced by an electric arc, and cutting oxygen is conveyed through the centre of an electrode, which is consumed in the process
70 003
gouging (thermal)
forming of a groove by means of thermal cutting
70 004
flame gouging
gouging using the principles of oxyfuel flame cutting
70 005
arc gouging
gouging using an arc cutting process variation
70 006
kerf
void left after metal has been removed in thermal cutting
70 007
waterjet cutting
process by which a high pressure water jet is used to erode a narrow channel in a material, with or without added abrasive grit
70 008
oxygen cutting
thermal cutting process using an oxygen/fuel gas flame to preheat the material to its ignition temperature and an oxygen jet to oxidize and remove material
70 009
cutting blowpipe
torch used in oxygen cutting for controlling the gases used to produce ignition temperature and for controlling and directing the stream of combustion gases
70 010
flame cutting
See oxygen cutting 70 008.
70 011
powder cutting
oxyfuel flame cutting in which a suitable powder is injected into the cutting oxygen stream to assist the cutting action
70 012
oxygen lance
steel tube, heated to its ignition point and consumed during operation, through which oxygen es NOTE The lance is packed with rods or else powder is fed through the lance.
70 013
air-arc cutting
thermal cutting process that uses the heat of an arc and cutting oxygen
70 014
plasma arc cutting
arc cutting process that uses a constricted arc and removes the molten metal with a high-velocity jet of ionized gas issuing from the constricting orifice
70 015
laser cutting
thermal cutting process usually ed by a gas jet which uses a focused laser beam of such intensity that it melts and vaporizes the material NOTE A distinction is made between laser oxyfuel flame cutting, laser fusion cutting and laser sublimation cutting.
70 016
gas jet laser cutting
See oxygen cutting 70 008.
70 017
thermal cutting
parting or shaping of materials by the application of heat with or without a stream of cutting oxygen
70 018
drag line
serration left on the face of a cut made by thermal cutting
70 019
drag
projected distance between the two ends of a drag line (see Figure 105)
BSI 2008
.
123
BS 499-1:2009
BRITISH STANDARD
Figure 105
Drag
No.
Term
Definition
70 020
underwater cutting
thermal cutting at such a depth below water level that the cutting action does not break the water surface
70 021
cutting head
one or more machine cutting blowpipes or plasma torches mounted together for making one or more cuts to produce the required edge profile
70 022
cutter steering system steering system
arrangement on a cutting machine for guiding and controlling the cutting head(s) along a desired path
70 023
cutting machine
thermal cutting equipment together with holding and moving devices for cutting metals
70 024
articulated-arm cutting machine
cutting machine with a hinged arm on which a cutting blowpipe or plasma torch and template following device are mounted in line with each other on the free end of the arm
70 025
cross-carriage cutting machine cutting machine with longitudinal and transverse carriages to move the cutting head and to permit profiling
70 026
single-cantilever cutting machine
cross-carriage cutting machine with a cutting area beneath a cutting head or heads mounted on a transverse cantilever carriage extending over one side of longitudinal tracks (see Figure 106)
70 027
double-cantilever cutting machine
cross-carriage cutting machine with two cutting areas each beneath a cutting head or heads mounted on a transverse cantilever extending over each side of the carriage (see Figure 107)
70 028
extended boom single-cantilever cutting machine
single-cantilever cutting machine with the cantilever lengthened to accommodate two cutting areas side by side (see Figure 108)
70 029
portal cutting machine gantry cutting machine
cross-carriage cutting machine with a cutting area beneath a cutting head or heads mounted on the transverse carriage between the longitudinal tracks (see Figure 109)
70 030
double-portal cutting machine portal cutting machine with two cutting areas side by side (see Figure 110)
70 031
portal-cantilever cutting machine
124
.
BSI 2008
combination of a portal and a single-cantilever cutting machine (see Figure 111)
BRITISH STANDARD
Figure 106
Figure 107
BS 499-1:2009
Single-cantilever cutting machine
Double-cantilever cutting machine
Figure 108
Extended boom single-cantilever cutting machine
Figure 109
Portal cutting machine
BSI 2008
.
125
BS 499-1:2009
BRITISH STANDARD
Figure 110
Double-portal cutting machine
Figure 111
Portal-cantilever cutting machine
Subsection 71. relating only to oxygen cutting No.
Term
Definition
71 001
oxygen cutting gas cutting: deprecated
thermal cutting of material by chemical reaction with oxygen after the appropriate part has been raised to ignition temperature
71 002
flame cutting
oxygen cutting in which the appropriate part of the material to be cut is raised to ignition temperature by an oxy-fuel gas flame
71 003
preheating oxygen
oxygen used at a suitable pressure in conjunction with fuel gas for raising to ignition temperature the metal to be cut
71 004
cutting oxygen
oxygen used at a pressure suitable for oxygen cutting
71 005
de-seaming
removal of surface defects from ingots, blooms, billets and slabs by means of manual thermal cutting
71 006
scarfing de-surfacing
removal of the surface or surfaces from blooms, billets and slabs by means of a flame cutting machine
71 007
hot cropping
oxygen cutting of hot ingots, blooms, billets and slabs to required lengths
71 008
powder cutting
oxyfuel flame cutting in which a suitable powder is injected into the cutting oxygen stream to assist the cutting action
71 009
flame washing
method of surface shaping and dressing of metal by flame cutting using a nozzle designed to produce a suitably shaped cutting oxygen stream
126
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
No.
Term
Definition
71 010
powder washing
flame washing with the introduction of powder into the cutting oxygen stream
71 011
oxygen lancing
oxyfuel flame cutting that uses an oxygen lance to produce holes or openings in a material
71 012
cutting blowpipe
device used in oxygen cutting for controlling the gases used to produce ignition temperature and for controlling and directing the stream of cutting oxygen
71 013
gouging blowpipe
cutting blowpipe with a nozzle designed for gouging
71 014
dual fuel blowpipe
oxygen cutting blowpipe that allows the use of an ixture of two fuel gases
71 015
flame planing machine
oxygen cutting machine capable of cutting a number of edges of a plate or plates simultaneously
71 016
cutter guide
device, attached to a manual cutting blowpipe, for maintaining the nozzle at a constant distance from the surface of the metal to be cut and assisting the operator in cutting
71 017
floating head
blowpipe holder on a flame cutting machine that, through a suitable linkage, is designed to follow the contour of the surface of the plate, thereby enabling the correct nozzle-toworkpiece distance to be maintained
71 018
venturi nozzle convergent/divergent nozzle
oxygen cutting nozzle designed to provide a high velocity cutting oxygen stream of approximately constant cross section
71 019
oxygen lance
steel tube, heated to its ignition point and consumed during operation, through which oxygen es
71 020
packed lance
oxygen lance packed with steel rods or wires
71 021
powder lance
oxygen lance in which powder is mixed with the oxygen stream
71 022
de-scaling blowpipe flame cleaning blowpipe
blowpipe fitted with a nozzle designed to give suitable flame conditions for spalling scale and removing particles from the surface of a workpiece
71 023
de-seaming blowpipe scarfing torch
blowpipe fitted with a nozzle suitable for de-seaming
71 024
rivet cutting blowpipe
blowpipe with a special nozzle for flame cutting off the protruding heads of rivets to facilitate their removal
71 025
tube cutting blowpipe
blowpipe fitted with a special nozzle designed to cut tubes from the inside
71 026
cutter head
part of a cutting blowpipe to which a nozzle is fitted
71 027
cutting oxygen bore
portion of the nozzle that controls the shape of the cutting oxygen stream leaving the orifice
71 028
parallel bore nozzle
oxygen cutting nozzle with a cylindrical cutting oxygen bore
71 029
step-type nozzle sheet metal nozzle
one-piece oxygen cutting nozzle with a single leading preheat orifice situated on a step at the end of the nozzle and a trailing cutting oxygen bore NOTE The nozzle is held in with the workpiece surface.
71 030
multi-preheat cutting nozzle multi-flame cutting nozzle
oxygen cutting nozzle with more than one orifice for the preheat gases
BSI 2008
.
127
BS 499-1:2009
BRITISH STANDARD
No.
Term
Definition
71 031
annular preheat cutting nozzle annular flame cutting nozzle
oxygen cutting nozzle with an annular slot orifice for the preheat gases
71 032
one-piece nozzle
oxygen cutting nozzle that is integral and contains the preheat and cutting oxygen gasways and bores
71 033
nozzle skirt
extension of the outer walls of an oxygen cutting nozzle beyond the preheat and cutting oxygen orifices NOTE A skirt is generally used for nozzles that are used with propane gas.
71 034
wheel guide roller guide
cutter guide fitted with one or two wheels that are in with the workpiece during cutting
71 035
spade guide
cutter guide fitted with one or two small plates that are in with the workpiece during cutting
71 036
flame planing unit
parts of a flame planing machine that cut one edge of a plate
71 037
rip-trim cutter
cutting blowpipe attached to and leading a cutting head that is used to make an initial plate edge trimming cut in front of the cutting head
71 038
rivet washing
progressive washing away, by oxygen cutting, of a rivet head and part of its shank for purposes of removal
71 039
rivet piercing
removal of a rivet by initially piercing a hole through it by oxygen cutting
Subsection 72. relating only to arc cutting No.
Term
Definition
72 001
carbon-arc cutting
thermal cutting by melting using the heat of an arc between a carbon electrode and the metal to be cut
72 002
metal-arc cutting
thermal cutting by melting using the heat of an arc between a metal electrode and the metal to be cut
72 003
air-arc cutting
thermal cutting using an arc for melting the metal and a stream of air to remove the molten metal to enable a cut to be made
72 004
cutting electrode
electrode with a covering that aids the production of such an arc that molten metal is blown away to produce a curve or cut in the work
72 005
plasma arc cutting
cutting with a plasma arc in which the constricted arc melts a narrow region of metal which is then blown away by the force of the arc
72 006
arc cutting
thermal cutting by melting the metal to be cut using the heat of an arc
Subsection 73. relating only to spark erosion cutting No.
Term
Definition
73 001
spark erosion cutting
cutting by means of the eroding action of a recurring series of sparks between an electrode and the workpiece
128
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Subsection 74. relating only to electron beam cutting No.
Term
Definition
74 001
electron beam cutting
thermal cutting in vacuum by melting and vaporizing a narrow section of metal by the impact of a focused beam of electrons
Subsection 75. relating only to laser cutting No.
Term
Definition
75 015
laser cutting
thermal cutting using the energy from a laser beam focused to a sufficiently high intensity to remove material by vaporization (typical of non-metals) or by a combination of vaporization and liquid-phase ejection (typical of metals)
75 016
gas jet laser cutting
laser cutting with the addition of a gas jet directed to the point at which the beam meets the workpiece NOTE With metals the gas can either be oxidizing (for example in the case of CMn steel) which reacts with the heated metal to effect the cut, or inert (for example in the case of stainless steel) if a smooth surface with a smaller HAZ is required compared to oxidizing cutting; with non-metals a substantially inert gas is used which acts to cool the cut edge and prevent damage.
BSI 2008
.
129
BS 499-1:2009
BRITISH STANDARD
Section 8. relating to health and safety No.
Term
Definition
80 001
air sampling
process consisting of the collection, withdrawal or isolation of a fractional part of a larger volume of air NOTE It may include the simultaneous isolation of selected components.
80 003
breathing zone
space around the worker’s face from where the worker breathes
80 004
headband
part of the harness to which the welder’s face shield is fixed and which surrounds the head, or part of the welder’s goggles or welder’s spectacles which secures them onto the head
80 005
time weighted average concentration
concentration of a chemical agent in the atmosphere, averaged over a reference period
80 006
total airborne particles
all particles surrounded by air in a given volume of air
80 007
face shield hand shield hand screen welder’s shield
protective device held in the hand to shield the face and throat from injury during welding, fitted with a window consisting of welding glass and plain glass, and if necessary a heat filter
130
.
BSI 2008
BRITISH STANDARD
BS 499-1:2009
Bibliography BS 499-1/IEV 50 (851):1991, Supplement, Welding and symbols – Supplement – Definitions for electric welding equipment BS 499-2c, Welding and symbols – European arc welding symbols in chart form BS EN 1011-1, Welding – Recommendations for welding of metallic materials – Part 1: General guidance for arc welding BS EN 1792, Welding – Multilingual list of for welding and related processes BS EN 13622, Gas welding equipment – Terminology – used for gas welding equipment BS EN 22553, Welded, brazed and soldered ts – Symbolic representation on drawings BS EN ISO 14555, Welding – Arc stud welding of metallic materials BS EN ISO 15607, Specification and qualification of welding procedures for metallic materials – General rules BS EN ISO 17659, Welding – Multilingual for welded ts with illustrations BS ISO 857-2, Welding and allied processes – Vocabulary – Part 2: Soldering and brazing processes and related PD CEN/TR 14599, and definitions for welding purposes in relation with EN 1792 ISO 857-1, Welding and allied processes – Vocabulary – Part 1: Metal welding processes ISO/DIS 25239-1, Friction stir welding – Aluminium – Part 1: Vocabulary
BSI 2008
.
131
BS 499-1:2009
132
.
BSI 2008
BRITISH STANDARD
This page deliberately left blank.
BRITISH STANDARD
BS 499-1:2009
Index a.c. welding generator, 32 070 abutment of raised edge, 10 094 accelerating voltage, 34 011 acceptance criteria, 10 066 acceptance level, 10 067 acid electrode, 32 030 actual throat thickness, 31 044 adaptive control system, 10 218 additional variable, 10 075 adjustable probe tool, 27 008 advancing side, 27 018 air gap, 10 063 air sampling, 80 001 air-acetylene blowpipe: bunsen type, 40 009 air-acetylene blowpipe: high temperature type, 40 010 air-arc cutting, 70 013 air-arc cutting, 72 003 alloy powder electrode, 32 111 all-position rightward welding, 33 084 all-weld test piece, 50 003 all-weld test specimen, 50 003 alternate polarity operation, 22 140 alternate polarity welding, 22 140 aluminothermic welding, 31 088 aluminothermic welding, 36 001 analogue timer, 21 039 angle centre electrode, 22 163 angle electrode, 22 077 angle of bevel, 31 038 angle offset electrode, 22 081 angle of preparation, 31 040 angle of preparation: deprecated, 31 038 annular flame cutting nozzle, 71 031 annular preheat cutting nozzle, 71 031 annular projection diameter, 22 045 anvil, 26 004 approved welding procedure, 10 160 arc blow, 32 074 arc blow compensator, 32 162 arc cutting, 72 006 arc damper, 32 162 arc energy, 32 116 arc eye, 10 041 arc fan, 32 141 arc gouging, 70 005 arc image welding, 35 009 arc length, 32 075 arc plasma welding, 32 066 arc spot welding, 32 011 arc stud welding, 32 015 arc voltage, 32 033 arc welding, 32 001 arc welding electrode, 32 016 arc welding plant, 32 036
arc welding power source, 32 036 arc welding transformer, 32 067 arcing time, 32 043 arcing time factor, 32 130 argon-arc torch, 32 142 arm, 22 091 articulated-arm cutting machine, 70 024 as welded, 10 089 assembled hose, 33 062 A-TIG, 32 186 atomic-hydrogen torch, 32 144 atomic-hydrogen welding, 32 107 automatic quick-acting shut-off device, 33 014 automatic stud welding equipment, 32 156 automatic welding, 10 011 auxiliary material, 10 090 averaging time, 22 165 back or front , 31 103 back plate, 22 161 back-bombarded gun, 34 020 backfire, 33 015 backflow, 33 016 backhand welding, 10 223 backing, 31 144 backing electrode, 22 036 backing gas, 32 089 back pressure: deprecated, 22 096, 22 098 back-step sequence, 31 002 back-step welding, 31 002 back-step welding, 31 003 back-up die, 22 162 backward force, 22 096 backward pressure, 22 098 backward welding, 33 008 baking oven, 31 094 bare wire elecrode, 32 108 base metal: deprecated, 10 013 basic electrode, 32 026 batch, 10 125 batch sample, 10 104 battery spot-welding machine, 22 107 bead, 31 064 beam current, 34 006 beam current control, 34 027 beam current pulsing, 34 012 beam deflection, 34 013 beam deflector, 34 028 beam oscillation, 34 014 beam power, 34 007 beam power density, 34 008 beam pulsing, 34 010 beam spinning, 34 036 beam welding, 31 161
bell butt t, 40 005 bias electrode, 34 023 bias voltage, 34 026 blending taper, 26 012 block sequence, 31 163 block welding, 31 163 blowhole, 60 051 blowing off the flame, 33 017 blowpipe head, 10 207 blowpipe shank, 10 208 blowpipe with a fixed mixer, 33 063 blowpipe with a single flow rate, 33 018 blowpipe with a variable injector, 33 065 blowpipe with an interchangeable injector, 33 066 blowpipe with multiple flow rates, 33 019 blowpipe with multiple flow rates adjusted by means of gas control valves, 33 067 blowpipe with nozzle mixing , 33 020 blowpipe with preliminary mixer, 33 021 blowpipe, 10 045 bolster, 22 090 bond weld, 40 011 both-side welding, 31 145 braided electrode, 32 173 branch T saddle t, 40 007 braze metal, 41 013 braze welding, 40 001 brazing, 41 001 brazing alloy, 41 009 breathing zone, 80 003 bronze filler metal, 40 004 bronze welding, 40 002 bronze welding rod, 40 004 buffer, 26 005 building-up, 10 057 bunsen-type mixer, 10 179 burden, 32 150 burn-back, 32 153 burn-off length, 23 007 burn-off rate, 32 087 burnt weld, 10 201 burn-through, 60 036 burst pressure, 33 022 butt t, 31 021 butt weld, 31 006 buttering, 31 136 butt-seam welding, 22 071 capacitor spot-welding machine, 22 105 capping run, 31 105 carbon-arc cutting, 72 001 carbon-arc welding, 32 004 BSI 2008
.
133
BS 499-1:2009
carburizing flame, 33 005 cascade firing, 22 159 cathode shield, 34 024 cathode, 34 021 cellulosic electrode, 32 025 chain intermittent weld, 31 164 chamfered member: deprecated, 31 173 chill time, 22 113 chipping goggles, 10 175 chipping hammer, 31 186 chipping mark, 60 047 clamp area, 22 095 clamp opening, 22 135 closed injector- mixer, 10 180 closed t preparation, 31 174 closing pressure, 33 068 CO2 gun, 32 143 CO2 spot welding, 32 106 CO2 welding, 32 104 coated filler rod: deprecated , 10 158 cold crack, 60 013 cold lapping, 60 008 cold pressure welding, 24 006 collar, 36 018 collar, 32 166 collision angle, 26 007 collision front, 26 009 combined blowpipe, 10 209 combined outfit: deprecated combined set: deprecated, 10 209 complete rectification, 32 139 concave fillet weld, 31 170 condenser-discharge spot-welding machine, 22 105 cone, 10 181 constant current control, 22 122 constant-pressure pressure welding, 24 004 constant-temperature pressure welding, 24 005 constant-voltage welding power source, 32 037 consumable electrode, 32 018 consumable nozzle, 37 002 consumable wire guide, 37 002 angle, 26 007 electrode, 32 031 tube, 31 087 continuous covered electrode, 32 184 continuous undercut, 60 006 continuous weld, 31 004 contracting parties, 10 127 controlled atmosphere brazing, 41 015 controlled bend test, 50 045 controlled-arc welding, 32 097 convex fillet weld, 31 169 cool time, 22 024 cooled shoe, 37 003 cooling rate, 10 084 welding, 32 099 134
.
BSI 2008
BRITISH STANDARD
convergent/divergent nozzle, 71 018 copper inclusion, 60 025 cored electrode, 34 028 cover glass, 10 172 corner t, 31 027 corrosion resistant surfacing, 10 129 cosmetic run, 31 137 cosmetic , 31 137 covered electrode, 32 020 covered filler rod, 10 158 crack, 60 011 cracking test, 50 010 cranked electrode, 22 082 cranked offset electrode, 22 082 crater filler, 32 115 crater pipe, 60 052 cross bar, 31 189 cross tension test, 50 054 cross-carriage cutting machine, 70 025 cross-wire weld, 22 014 cruciform t, 31 176 cruciform test, 50 051 cruciform test piece, 50 050 cruciform test specimen, 50 050 current decay, 22 148 current-off time, 22 115 cutter guide, 71 016 cutter head, 71 026 cutter steering system, 70 022 cutting blowpipe, 70 009 cutting blowpipe, 71 012 cutting electrode, 72 004 cutting head, 70 021 cutting machine, 70 023 cutting oxygen, 71 004 cutting oxygen bore, 71 027 cycle, 10 164 cycle counter, 22 176 cycle recorder, 22 177 cyclic reignition voltage, 32 120 cylinder bundles, 33 024 d.c. welding generator, 32 068 decay current, 22 147 decay time, 22 146 deep penetration electrode, 32 112 deflection coils, 34 028 deformation, 24 010 delayed firing, 22 158 delayed non-beat, 22 154 dense slag, 32 177 deposited metal, 10 018 deposition coefficient, 32 083 deposition efficiency, 32 082 deposition rate , 10 022 depth of preparation, 31 106 depth of raised edge, 31 107 depth of root face, 31 108 de-scaling blowpipe, 71 022 de-seaming, 71 005 de-seaming blowpipe, 71 023
design throat thickness, 31 045 destructive testing, 50 029 de-surfacing, 71 006 die, 22 087 die area, 22 095 die gap, 22 134 die opening, 22 134 diffusion welding, 21 022 diffusion welding, 25 001 digital timer, 21 038 dilution, 31 098 diminishing bell butt t, 40 006 diode gun, 34 018 dip brazing, 41 003 dip transfer, 32 057 dipped electrode, 32 174 directly heated gun, 34 017 discharge of the relief valve, 33 069 dissimilar material t, 10 088 dissolved acetylene, 10 213 distortion bung, 26 013 distortion plug, 26 013 double-bevel butt weld, 31 166 double-cantilever cutting machine, 70 027 double-conductor connection cable, 22 041 double-cranked electrode, 22 164 double-J butt weld, 31 014 double-portal cutting machine, 70 030 double-side single-run welding, 31 146 double-U butt weld, 31 012 double-V butt weld, 31 010 down force, 27 021 downhand position: deprecated, 31 054 drag, 70 019 drag line, 70 018 drooping characteristic welding power source, 32 038 drooping characteristic welding power source, 32 125 droplet transfer, 32 055 drying oven, 31 095 dual fuel blowpipe, 71 014 dual gun control, 22 156 dual gun dual sequence control, 22 157 dual gun dual welding cycle control, 22 157 dual-pressure cycle, 22 119 duty cycle, 10 035 dwell, 21 016 dwell time, 21 017, 22 026 dwell time at end of weld, 27 026 dwell time at start of weld, 27 025 dynamic characteristic, 32 073 EB welding, 34 001 edge distance, 10 102
BRITISH STANDARD
edge t, 31 028 edge preparation, 31 036 edge weld, 31 020 effective electrode efficiency, 32 084 effective length, 31 181 effective throat thickness, 31 046 electrode, 22 015, 32 016 electrode clearance, 22 181 electrode area, 22 095 electrode current range, 32 136 electrode efficiency, 32 151 electrode extension, 32 052 electrode face, 22 160 electrode force, 22 097 electrode gap, 22 181 electrode holder, 10 042 electrode negative, 32 147 electrode pick-up, 10 038 electrode pick-up, 22 085 electrode positive, 32 146 electrode pressure, 22 020 electrode recovery, 32 151 electrode shank, 22 016 electrode tip, 22 075 electrode wheel, 22 017 electrode wheel head, 22 189 electrode yield, 32 151 electro-gas welding, 32 010 electron beam cutting, 74 001 electron beam welding machine, 34 016 electron beam welding, 34 001 electron gun, 34 002 electronic frequency converter, 22 149 electroslag welding, 31 090 electro-slag welding, 37 001 electro-slag welding flux, 37 005 elongated cavity, 60 033 end preparation, 31 036 end tapering, 31 190 engine driven power source, 32 071 essential variable, 10 074 evaluation level, 60 009 examiner, 10 068 examining body, 10 069 excess flow cut-off valve, 33 025 excess penetration , 60 040 excess weld metal, 31 050 excessive dressing, 60 045 excessive penetration, 60 003 exit hole, 27 030 expansion gun, 22 185 explosive cladding, 21 023 explosive welding, 26 001 extended boom, 70 028 external gas leakage, 33 070 extruded electrode, 32 175 face bend test, 50 006 face bend test specimen of butt weld, 50 023
BS 499-1:2009
face bend test specimen of cladding with a butt weld, 50 026 face bend test specimen of cladding without a butt weld, 50 024 face mask, 10 176 face shield, 80 007 faying surface, 10 151 feather, 10 182 feather edge, 31 034 control system, 10 218 ferrite number, 10 117 ferrule, 32 167 field electrode, 34 024 filament, 34 021 filament current, 34 022 filler metal , 10 014 filler rod, 10 016 filler wire, 10 015 fillet weld, 31 015 fillet, 32 166 filling run(s), 31 109 filter glass, 10 043 fin, 22 092 final current, 22 174 finishing welding, 10 140 firecracker welding, 32 103 fire welding, 21 042 firing angle, 22 126 fish eye, 60 054 fitness-for-purpose, 10 092 fitted hose, 10 187 fixed bobbin tool, 27 010 fixed probe, 27 006 fixed shield , 10 171 flame arrestor, 71 022 flame cleaning blowpipe, 71 022 flashback arrester, 10 193 flame brazing, 41 004 flame cutting, 70 010 flame cutting, 71 002 flame gouging, 70 004 flame normalizing, 10 195 flame planing machine, 71 015 flame planing unit, 71 036 flame snap-out, 10 189 flame washing, 71 009 flash, 23 008, 27 032 flash butt welding: deprecated, 22 003 flash welding with preheating, 22 066 flash welding, 22 003 flashback, 10 046 flashing, 22 040 flashing allowance, 22 018 flashing current, 22 028 flashing loss, 22 038 flashing speed, 22 031 flashing time, 22 021 flashing travel, 22 030 flat electrode, 22 083 flat face fillet weld, 31 167
flat position, 31 054 flat spot, 60 055 flattening test, 50 053 floating head, 71 017 fluid slag, 32 180 flush weld, 31 172 flux, 10 017 flux cored electrode, 32 022 flux-cored wire: deprecated, 32 022 flux-dip brazing, 41 008 fluxed ferrule, 32 168 flyer plate, 26 003 focal length, 35 006 focal spot, 35 007 focus control, 34 030 focusing lens, 34 029 focusing lens current, 34 037 foil butt-seam welding, 22 072 foil surface, 22 062 foil length, 22 057 foil thickness, 22 050 foil width, 22 055 follow-up, 22 182 foot-operated welding machine, 22 100 force control, 27 020 forehand welding, 10 222 forge delay time, 22 035 forge force, 21 013 forge length, 23 012 forge pressure, 23 011 forge rate, 23 013 forge time, 21 015 forge welding, 21 042 forging force, 21 013 forging pressure, 23 011 forging speed, 23 006 forging time, 21 015 forward force, 21 027 forward pressure, 21 032 forward welding, 33 007 free bend test, 50 046 friable slag, 32 179 friction force, 23 002 friction pressure, 23 003 friction speed, 23 004 friction stir welding, 23 009 friction time, 23 005 friction welding, 23 001 friction welding forge force, 23 010 full penetration welding, 31 066 full vacuum system, 34 032 fully mechanized welding, 10 135 function test, 10 109 furnace brazing, 41 005 fused melt, 32 149 fusible insert, 31 080 fusion boundary, 10 159 fusion face, 31 178 fusion face (fillet weld), 31 111 fusion face (prepared), 31 112 fusion face (unprepared), 31 113 BSI 2008
.
135
BS 499-1:2009
fusion fusion fusion fusion fusion
line, 10 026, 10 159 penetration, 31 114 spot weld, 31 171 welding, 31 001 zone , 10 025
BRITISH STANDARD
gantry cutting machine, 70 029 gap, 10 063 gap bar, 31 189 gas backing, 31 091 gas cavity, 60 027 gas cutting: deprecated, 71 001 gas economizer, 10 190 gas envelope, 10 183 gas flow rate, 31 092 gas fluxing, 40 003 gas jet laser cutting, 70 016 gas jet laser cutting, 75 016 gas laser, 35 005 gas pore, 60 026 gas regulator, 10 047 gas shield, 32 046 gas welding, 33 001 gas-shielded arc welding, 32 077 gas-shielded metal-arc welding, 32 078 globular transfer, 32 054 gouging (thermal), 70 003 gouging blowpipe, 71 013 granular flux filled stud, 32 163 gravity welding with covered electrode, 32 076 grid electrode, 34 023 grinding mark, 60 046 groove weld, 10 214 guide tube, 32 114 guided bend test, 50 044 gun, 22 155 gun welding head, 22 155
heat resistant surfacing, 10 130 heat time, 22 111 heat-affected zone, 10 024, 27 027 heater current, 34 022 heating rate, 10 085 heating time, 24 007 heel, 27 009 heel plunge depth, 27 017 helmet, 10 177 heterogeneous t, 10 144 HF induction welding, 21 003 HF ionizer: deprecated, 32 124 HF pressure welding, 24 002 HF reignition, 32 121 HF resistance welding, 22 013 HF unit, 32 124 high lift system, 22 180 high pressure blowpipe, 10 100 high pressure blowpipe, 33 029 high voltage electron gun, 34 005 hold time, 22 026 homogeneous t, 10 095 hook, 27 038 horizontal overhead position, 31 058 horizontal position, 31 060 horizontal vertical position, 31 055 hose assembly, 33 031 hose clamp, 33 032 hose coupler, 10 188 hose coupling nipple, 10 186 hose coupling nut, 10 185 hose tail, 33 034 hot crack, 60 012 hot cracking test, 50 011 hot cropping, 71 007 hydraulic back pressure valve, 10 194 hydrogen controlled electrode, 32 027 hydrogen valve, 32 145
half-cycle welding, 22 074 hammer mark, 60 048 hand-operated welding machine, 22 099 hand screen, 80 007 hand shield, 80 007 hard facing electrode, 32 113 hard facing, 10 033 hard surfacing, 10 033 hard surfacing electrode, 32 113 hard vacuum system, 34 032 harsh flame, 10 211 HAZ, 10 024. 27 027 head lowering time, 22 168 head mixing blowpipe, 10 210 head screen, 10 177 head shield, 10 177 headband, 80 004 heat control, 22 121 heat diffusion time, 22 172 heat filter, 10 044 heat input, 10 064
idling time, 10 162 igniter, 36 004 ignition powder, 36 003 imperfection, 60 001 inclined electrode, 22 077 inclined position, 31 062 included angle, 31 040 inclusion, 60 020 incomplete penetration, 27 034, 60 018 incompletely filled groove, 60 004 indentation, 22 053 indentation depth, 22 059 indication, 60 029 indirect spot welding, 22 034 induction brazing, 41 006 induction spot-welding machine, 22 106 inductor spot-welding machine, 22 106 inert-gas consumable electrode spot welding, 32 013
136
.
BSI 2008
inert-gas tungsten-arc spot welding, 32 014 inherent rectification, 32 140 initial current, 22 173 initial force, 21 028 initial inclination, 26 006 initial plate angle, 26 006 initial pressure, 21 033 injector-mixer, 33 035 insert, 22 088 interface, 21 002 interface: deprecated, 10 151 interface: deprecated, 22 094 intermittent undercut, 60 007 intermittent weld, 31 005 internal gas leakage, 33 071 internal imperfection, 60 037 inter temperature, 31 085 interpulse time, 10 196 intrusion, 60 056 inverter welding power source, 32 042 iron oxide electrode, 32 110 iron powder electrode, 32 028 jet, 26 010 t, 10 061 t efficiency, 10 150 t length, 10 124 t line remnant, 27 036 t preparation, 10 060 t recognition, 10 219 t tracking, 10 221 t welding, 10 142 kerf, 70 006 keyhole technique, 31 147 kissing bond, 27 037 lack of fusion, 60 014 lack of inter-run fusion, 60 017 lack of root fusion, 60 016 lack of sidewall fusion, 60 015 land, 31 035 lap t, 31 026 lap t sheet thinning, 27 039 lap length, 10 123 lap width, 10 121 lapped area, 10 136 laser, 35 003 laser cutting, 70 015 laser cutting, 75 015 laser welding, 35 002 lateral offset, 27 013 layer, 10 056 layer of capping runs, 31 117 layers of filling runs, 31 118 leftward welding, 33 007 leg, 31 180 leg length, 31 043 length of raised edge, 31 119 lift, 10 154
BRITISH STANDARD
lift, 32 161 light radiation welding, 35 001 linear inclusion, 60 021 linear indication, 50 031 linear porosity, 60 032 liquid phase diffusion welding, 25 003 load current, 32 131 load voltage, 32 132 localized porosity, 60 031 longitudinal bend specimen, 50 005 longitudinal edge of preparation, 31 120 longitudinal edge of root face, 31 121 longitudinal side of raised edge, 31 122 low hydrogen electrode: deprecated, 32 026 low pressure blowpipe, 10 101 low pressure blowpipe, 33 036 low voltage electron gun, 34 003 machine stroke, 22 132 macroscopic examination, 50 027 MAG welding, 32 005 magnetically-impelled arc butt welding, 21 024 main arc, 32 044 manifold regulator, 10 192 manifold systems, 33 072 manipulation, 10 217 manipulator, 31 063 manual metal-arc welding, 32 003 manual quick acting shut-off valve, 33 042 manual welding, 10 007 manufacturer’s previous welding experience, 10 113 manufacturing organization, 10 098 mash seam weld, 22 063 maximum continuous hand-welding current, 32 134 maximum operating pressure, 33 073 maximum permissible external leakage rates, 33 074 maximum throat thickness: deprecated, 31 192 maximum welding current, 32 133 mechanized welding, 10 010 medium voltage electron gun, 34 004 melt, 32 148 melt run, 31 071 melting rate, 32 087 melt-through, 60 036 metal active-gas welding, 32 005 metal cored electrode, 32 023 metal inert-gas welding, 32 006 metal recovery, 32 082 metal run-out, 60 043 metal transfer, 32 053 metal-arc cutting, 72 002 metal-arc spot welding, 32 012 metal-arc welding, 32 002
BS 499-1:2009
metallized fluxed stud, 32 164 metallurgical deviation, 60 002 micro-plasma arc welding, 32 080 microscopic examination, 50 028 MIG gun, 32 143 MIG pulsed-arc welding, 32 169 MIG spot welding, 32 013 MIG welding, 32 006 mitre fillet weld, 31 168 mixer without injector action, 33 044 MMA welding, 32 003 modulator, 22 178 molten pool, 31 184 motor generator welding power source, 32 127 motor-operated welding machine, 22 102 mould, 36 011 multifunctional safety device, 33 046 multiple spot welding, 22 006 multi-flame cutting nozzle, 71 030 multi-power welding, 32 101 multi-preheat cutting nozzle, 71 030 multi-pressure cycle, 22 179 multi-run welding, 31 148 multi-stage regulator, 10 192 nail head welding, 22 064 narrow gap welding, 32 090 neutral flame, 33 003 nick-break test, 50 049 no-load voltage, 32 035 nominal electrode efficiency, 32 058 nominal inlet pressure, 33 077 nominal outlet pressure, 33 076 nominal thickness, 10 106 non-beat, 22 153 non-consumable electrode, 32 017 non-destructive testing, 50 030 non-essential variable, 10 075 non-linear indication, 50 032 non-repeat operation, 22 152 non-return valve, 33 048 non-shielded welding, 32 182 non-synchronous control, 22 124 non-transferred arc, 10 037 non-transferred arc, 10 168 non-vacuum system, 34 034 nose: deprecated, 31 031 nozzle skirt, 71 033 nozzle, 10 206 nozzle-constricted arc, 10 165 nugget, 27 029 nugget diameter, 22 046 nugget overlap, 22 060 nugget thickness, 22 051 object-to-film distance, 50 033 offset electrode, 22 078 off-time, 22 024 one-piece nozzle, 71 032 one-side welding, 31 149
on-time, 22 111 open arc welding, 32 096 open circuit voltage, 32 035 open injector-mixer, 10 179 open t preparation, 31 175 operational stroke, 22 133 optical viewing system, 34 031 out of vacuum system, 34 034 overall weld metal recovery, 32 085 overhang, 21 037 overhead position, 31 061 overlap, 10 131 overlap, 60 008 oxide inclusion, 60 023 oxidizing flame, 33 006 oxy-acetylene pressure welding, 24 003 oxy-acetylene welding, 33 002 oxy-fuel gas pressure welding, 21 020 oxygen cutting, 70 008, 71 001 oxygen lance, 70 012 oxygen lance, 71 019 oxygen lancing, 71 011 oxygen-arc cutting, 70 002 packed lance, 71 020 pad electrode, 22 083 parallel bore nozzle, 71 028 parallel spot welding, 22 137 parallel welding, 32 100 parent material, 10 126 parent metal, 10 013 parent plate, 26 002 partial penetration weld, 31 067 partial rectification, 32 138 partial vacuum system, 34 033 partially transferred arc, 10 169 particle transfer frequency, 32 056 partly mechanized welding, 10 008, 10 155 , 10 021 peaking, 50 057 pedal-operated welding machine, 22 100 peel test, 50 012 penetrated thickness, 50 034 penetration bead, 31 182 penetration bead thickness, 31 123 penetration , 31 183 penetration run, 31 183 percussion welding, 22 012 permanent backing ring, 31 076 permanent backing, 31 075 perveance, 34 025 phase angle, 22 126 phase displacement, 22 175 phase shift, 22 125 pick-up, 10 040 pillow test, 50 056 pilot arc, 32 045 pincer spot-welding machine, 22 104 pipe: deprecated, 60 035 BSI 2008
.
137
BS 499-1:2009
pitch of projections, 22 048 plain glass, 10 172 plasma arc, 10 203 plasma arc cutting, 70 014 plasma arc cutting, 72 005 plasma arc welding, 32 066 plasma gas, 10 082 plasma gun: deprecated, 32 050 plasma jet, 10 204 plasma MIG welding, 32 091 plasma torch, 32 050 plasma weld surfacing, 10 205 plate edge, 10 097 plate thickness, 10 105 platen, 22 089 plier spot-welding machine, 22 104 plug test, 50 012 plug weld, 31 017 plugging material, 36 009 poke gun, 22 184 porosity, 60 028 porous slag, 32 178 portable spot-welding machine, 22 103 portal cutting machine, 70 029 portal-cantilever cutting machine, 70 031 position control, 27 012 positioner, 31 063 post-braze diffusion treatment, 41 014 post-heat time, 22 114 post-heating current , 22 118 post-heating force, 21 031 post-heating pressure, 21 036 post-heating pressure time, 22 167 post-weld heat treatment, 10 081 post-weld time, 22 142 post-weld upset force, 21 030 post-weld upset pressure, 21 035 pouring gate, 36 013 powder cutting, 70 011 powder cutting, 71 008 powder lance, 71 021 powder plasma welding, 32 092 powder washing, 71 010 power arc: deprecated, 32 044 power-operated welding machine, 22 101 preheat, 10 083 preheat maintenance temperature, 10 137 preheat time, 22 109 preheating allowance, 22 183 preheating current, 22 117 preheating gate, 36 012 preheating loss, 22 131 preheating oxygen, 71 003 preheating temperature, 10 138 pre-production welding test, 10 111 pressure application time, 22 169 pressure area, 21 026 138
.
BSI 2008
BRITISH STANDARD
pressure decrease time, 22 170 pressure head, 22 188 pressure regulator, 10 047 pressure relief valve, 33 051 pressure welding, 24 001 pressure-off time, 22 116 pressure-sensitive cut-off valve, 33 050 pre-weld time, 22 141 probe, 27 002 production sample testing, 10 112 production test, 10 110 production welding, 10 133 productive welding time, 10 145 programme control, 22 120 projected area, 50 035 projection diameter, 22 044 projection height, 22 052 projection length, 22 056 projection welding, 22 010 projection width, 22 054 proof pressure, 33 052 protrusion, 10 153 puckering, 60 053 pull technique, 32 093 pulsation welding, 22 073 pulse, 10 050 pulse time, 10 051 pulsed MIG welding, 32 064 pulsed TIG welding, 32 065 push gun, 22 184 push technique, 32 094 push-pull series spot welding, 22 138 qualified person, 10 143 quality level, 10 091 quench time, 22 113 quick-action coupling with shut-off valve, 33 054 quiver, 31 096 radius of raised edge, 31 124 range of qualification, 10 103 rate of slope, 22 128 rate of travel, 31 082 reaction gun, 22 185 recording level, 50 036 recovery time, 10 163 rectifier converter, 10 199 rectifier welding power source, 32 128 reducing flame, 33 004 reinforcement overfill, 31 050 repeat operation, 22 151 residual welding stress, 10 048 resistance brazing, 41 002 resistance butt welding, 22 002 resistance stud welding, 22 011 resistance weld setter, 22 061 resistance welding, 22 001 resistance welding electrode, 22 015 re-start, 10 080
restrained weld test, 50 047 restriking voltage, 32 118 retreating side, 27 019 reverse bend test, 50 043 reverse side, 10 115 rightward welding, 33 008 rip-trim cutter, 71 037 riser, 36 014 rising characteristic welding power source, 32 126 rivet cutting blowpipe, 71 024 rivet piercing, 71 039 rivet washing, 71 038 robot, 10 216 robotic welding, 10 134 rocker arm, 22 186 roll welding, 10 215 roller guide, 71 034 roller spot welding, 22 067 root (of preparation), 31 179 root (of weld), 31 126 root bend specimen of butt weld, 50 014 root bend test, 50 008 root concavity, 60 041 root face, 31 031 root gap, 31 125 root , 31 068 root penetration, 31 127 root radius, 31 041 root run, 31 068 root width, 31 128 rotary welding transformer, 22 187 rotation, 10 132 routine manufacturing test, 33 078 row pitch, 22 047 run, 10 021 run-off plate, 31 074 run-off test plate, 50 041 run-on plate, 31 073 run-on test plate, 50 040 run-off test plate, 50 041 run-on plate, 31 073 run-on test plate, 50 040 rutile electrode, 32 024 SA welding, 32 008 safety device, 33 079 sagged weld, 60 044 salt bath brazing, 41 007 scarfing, 71 006 scarfing torch, 71 023 seal weld, 31 018 sealing run, 31 070 sealing weld, 31 018 seam tracking, 10 221 seam welding, 22 008 self-adjusting arc welding, 32 098 self-reacting bobbin tool, 27 011 self-regulating arc-welding transformer, 32 171
BRITISH STANDARD
self-regulating d.c. welding generator, 32 172 self-shielding tubular-cored arc welding, 32 095 semi-automatic welding, 10 155 semi-fusion welding: deprecated, 33 085 separately pumped electron gun, 34 035 sequence firing: deprecated, 22 159 sequence timer, 21 040 series arc welding, 32 102 series spot welding, 22 007 shear test piece, 50 055 shear test specimen, 50 055 sheathed electrode, 32 109 sheet metal nozzle, 71 029 shielding gas, 31 150 shocked metal zone, 26 011 shoe, 31 188 shop weld, 10 156 short bell branch t, 40 008 shoulder, 27 007 shoulder footprint, 27 031 shrinkage cavity, 60 034 shrinkage groove, 60 042 side bend specimen of cladding without a butt weld, 50 015 side bend test, 50 009 side bend test specimen of butt weld, 50 016 side bend test specimen of cladding with a butt weld, 50 025 side edge of preparation, 31 129 side edge of root face, 31 130 side edge of workpiece, 10 093 sideways force, 27 022 sideways title angle, 27 015 simultaneous double side welding, 31 151 single-bevel butt weld, 31 165 single-cantilever cutting machine, 70 026, 70 028 single-conductor connection cable, 22 042 single-J butt weld, 31 013 single operation, 22 152 single-run welding, 31 152 single-U butt weld, 31 011 single-V butt weld, 31 008 site weld, 10 157 size, 31 043 skip sequence, 31 162 skip welding, 31 162 slag, 31 083 slag basin, 36 015 slag line, 60 021 slag pot, 36 016 slag shute, 36 017 slag trap, 60 050 sleeve t, 10 170 slitter bar: deprecated, 31 189
BS 499-1:2009
slope, 10 116 slope control, 22 127 slope time, 22 129 slope-down, 31 138 slope-led welding power source, 32 129 slope-up, 31 139 slot lap t, 31 143 slot weld, 31 143 slow butt welding: deprecated, 22 002 slug loaded stud, 32 165 slug test, 50 012 soft flame, 10 212 soft vacuum system, 34 033 solid inclusion, 60 022 solid-phase welding, 24 001 solid slag, 32 177 solid state diffusion welding, 25 002 solid state laser, 35 004 solidification crack, 60 019, 60 012 solidification cracking test, 50 011 source size, 50 037 source-to-film distance, 50 038 source-to-object distance, 50 039 spade guide, 71 035 spark erosion cutting, 73 001 spark reignition, 32 121 spark starting, 32 119 spatter, 10 034 spatter loss, 32 154 spatter shield, 32 158 specific beam power, 34 008 spelter, 41 010 splash, 22 093 spontaneous ignition temperature, 33 080 spot position, 34 015 spot welding, 22 004 spray transfer, 32 055 square butt weld, 31 007 squeeze time, 22 110 stack cutting, 70 001 staggered intermittent weld, 31 009 staggered resistance welds, 22 043 standard discharge, 33 081 standard material, 10 076 stand-off distance, 26 008 stand-off gap, 26 008 starting block, 37 004 static characteristic, 32 072 static plate, 26 002 steering system, 70 022 step time, 22 112 step-by-step roller spot welding, 22 068 step-by-step seam welding, 22 069 step-by-step welding, 22 070 step-type nozzle, 71 029 stick electrode, 32 183 stitch welding, 22 005 stone, 36 006
stopping time, 23 014 stopping-off agent, 41 011 stored-energy welding, 10 200 straight electrode, 22 079 straight flash welding, 22 065 stray arc, 60 039 strength weld , 10 012 striking plate, 32 155 striking voltage, 32 034 stringer bead, 31 086 stringer bead, 31 191 strip cladding, 32 081 stub end, 32 061 stub-in, 32 152 stud, 10 152 stud welding, 10 032 stud welding controller, 32 159 stud welding gun, 32 160 stud welding tool, 32 157 submerged-arc welding, 32 008 suck-back, 60 041 surface fusion welding, 33 085 surface pick-up, 22 086 surface pitting, 60 010 surfacing, 10 058 surge injector, 32 123 surge reignition, 32 122 sustained backfire, 33 060 swan-necked electrode, 22 164 synchronous control, 22 123 synergic pulsed MIG welding, 32 185 systematic imperfection, 60 038 tack sequence, 31 097 tack weld , 31 016 tack welding, 31 141 tacking , 31 140 tacking run, 31 140 tandem arc welding, 32 187 tape butt-seam welding, 22 072 tapered member, 31 173 tapping pin, 36 008 temperature sensitive cut-off device, 33 061 temporary backing ring, 31 078 temporary backing, 31 077 temporary weld, 31 154 test coupon: deprecated, 50 001 test piece, 50 001 test specimen, 50 001, 50 002 testing level, 50 020 testing organization, 50 021 thermal cutting, 70 017 thermal efficiency, 31 155 thermit crucible, 36 005 thermit mixture, 36 002 thermit welding, 36 001 thermomechanically affected zone, 27 028 thimble, 36 007 threaded hose connection , 10 184 three-phase welding machine, 10 161 BSI 2008
.
139
BS 499-1:2009
three-phase welding power source, 10 161 throat, 22 032 throat depth, 22 032 throat gap, 22 033 throat thickness, 31 044 TIG pulsed-arc welding, 32 170 TIG spot welding, 32 014 TIG torch, 32 142 TIG welding, 32 007 tilt angle, 27 014 time weighted average concentration, 80 005 tip, deprecated, 10 206 T-t, 31 022 TMAZ, 27 028 toe flash, 27 022 toe, 31 037 tongue-bend test specimen, 50 052 tool, 27 001 tool mark, 60 047 tool plunge depth, 27 016 torch, 32 047 torch: deprecated, 10 045 torch angle, 32 051 torch brazing: deprecated, 41 004 torn surface, 60 049 total airborne particles, 80 006 total allowance, 21 011 total loss, 21 041 touch time, 22 171 touch type electrode, 32 031 touch welding, 32 099 trailing gas shield, 31 093 transfer efficiency, 31 187 transferred arc, 10 036 transferred arc, 10 167 transverse bend specimen, 50 004 transverse tensile specimen, 50 042 travel angle, 27 014 travel speed, 27 024, 31 082 traversing force, 27 023 traversing rate, 27 024 traversing speed, 27 024 tread, 22 084 triode gun, 34 019 true arc voltage, 32 117 tube cutting blowpipe, 71 025 tubular cored electrode, 32 021 tungsten inclusion, 60 024 tungsten inert-gas welding, 32 007 tungsten-arc spot welding, 32 105 twin wire welding, 32 188 two-stage initiation, 22 150 two-stage regulator, 10 191 type test, 33 082 typical electrode current, 32 135 ultrasonic welding, 21 021 undercut, 60 005 underfill, 27 033 underflushing, 60 045 140
.
BSI 2008
BRITISH STANDARD
underwashing, 60 041 underwater cutting, 70 020 uniformly distributed porosity, 60 030 union nut: deprecated, 10 185 unipolarity operation, 22 139 unipolarity welding, 22 139 upper workpiece surface, 10 114 upset, 21 004 upset allowance, 21 005 upset butt welding: deprecated, 22 002 upset current, 22 037 upset current time, 22 023 upset force, 21 008 upset length, 21 012 upset metal, 21 004 upset pressure, 21 010 upset speed, 21 006 upset time, 22 022 upset travel, 22 130 upsetting, 21 025 upsetting time, 24 008 upstream pressure for type testing, 33 083 U-tensile test, 50 048 vacuum brazing, 41 012 venturi nozzle, 71 018 vertical centre electrode, 22 079 vertical down position, 31 057 vertical electrode, 22 076 vertical offset electrode, 22 080 vertical up position, 31 056 viscous slag, 32 181 void, 27 035 volumetric flaw, 27 035 vortex-constricted arc, 10 166 wandering arc, 32 063 wandering sequence, 31 162 waterjet cutting, 70 007 wax pattern, 36 010 wearing depth, 22 136 weave bead, 31 156 weave technique, 31 157 weaving, 31 185 weaving amplitude, 31 158 weaving frequency, 31 159 weaving width, 31 160 weld, 10 002 weld area, 22 094 weld delay time, 22 143 weld edge: deprecated, 31 037 weld face, 31 177 weld feature recognition, 10 220 weld heat time, 22 144 weld interface, 10 119 weld interval heat time, 22 145 weld junction, 10 159 weld length, 10 122 weld metal, 10 020
weld nugget, 22 058 weld pitch, 22 049 weld pool, 31 072, 31 184 weld pool backing, 31 144 weld preparation, 10 060 weld recognition, 10 220 weld rotation, R, 31 052 weld run sequence, 10 031 weld slope, S, 31 051 weld slug, 22 108 weld surface with bead ripples, 31 102 weld time, 22 025 weld timer, 10 198 weld toe angle, 31 133 weld width, 31 047 weld zone , 10 023 weldability, 10 202 weldable primer: deprecated, 10 052 welder, 10 003 welder: deprecated, 10 005 welder’s shield, 80 007 welding, 10 001 welding accessories, 10 055 welding blowpipe, 33 010 welding conditions, 10 146 welding consumables, 10 053 welding converter, 10 199, 32 040 welding co-ordination personnel, 10 128 welding co-ordinator, 10 099 welding current, 22 027 welding cycle, 10 197, 21 007 welding cycle time, 10 197 welding die, 22 087 welding equipment, 10 054 welding force, 21 029 welding glass, 10 043 welding gloves, 10 178 welding goggles , 10 174 welding gun, 32 048 welding head, 32 032 welding load: deprecated, 21 029 welding operator, 10 004 welding parameters, 10 147 welding plant, 10 005 welding position, 31 053 welding pressure, 21 034 welding pressure head, 22 188 welding pressure time, 22 166 welding primer, 10 052 welding procedure , 10 028 welding procedure qualification record, WPQR, 10 071 welding procedure requirements, 31 100 welding procedure specification, WPS, 10 070 welding procedure test , 10 108 welding process, 10 006 welding rectifier, 10 199, 32 041 welding rod: deprecated, 10 016
BRITISH STANDARD
(welding) sequence, 10 030 welding sequence schedule, 10 148 welding spectacles, 10 173 welding speed, 27 024, 31 081 welding technique , 10 027 welding time, 10 149 welding time, 24 009 welding variable, 10 073 welding wire, 10 015 welding with pressure, 21 001 weld-through sealer, 22 190
BS 499-1:2009
wheel guide, 71 034 width of preparation, 31 134 width of prepared face, 31 135 wire feed nozzle, 31 084 wire feed rate, 32 060 wire guide, 31 084 woodpecker welding: deprecated, 22 073 work instruction, 10 118 working distance, 34 009 workpiece width, 10 120
wormhole, 60 035 x-direction, 27 004 x-force, 27 023 y-direction, 27 005 y-force, 27 022 z-direction, 27 003 z-force, 27 021 zero current pause, 32 137
BSI 2008
.
141
BS 499-1:2009
142
.
BSI 2008
BRITISH STANDARD
This page deliberately left blank
British Standards Institution (BSI) BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.
Revisions
Information on standards
British Standards are updated by amendment or revision. s of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000 Fax: +44 (0)20 8996 7400 BSI offers an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.
BSI provides a wide range of information on national, European and international standards through its Library. Various BSI electronic information services are also available which give details on all its products and services. the Information Centre. Tel: +44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: [email protected] Information regarding online access to British Standards via British Standards Online can be found at www.bsigroup.com/BSOL Further information about BSI is available on the BSI website at www.bsigroup.com
Buying standards Orders for all BSI, international and foreign standards publications should be addressed to BSI Customer Services. Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 Email: [email protected] You may also buy directly using a debit/credit card from the BSI Shop on the website www.bsigroup.com/shop In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.
Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means – electronic, photocopying, recording or otherwise – without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070 Email: [email protected]
BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 9001 Fax +44 (0)20 8996 7001 www.bsigroup.com/standards
raising standards worldwide™
Related Documents g842
Bs 499 2t4fp
October 2019 147
Bs 499.pdf 25z3k
December 2019 30
Bs 499-p1 4x16h
December 2019 42
Bs 499 Part 2 146y28
October 2019 128
10.1002_stc.499 6u3y26
December 2020 0
Naruto 499 4r123c
August 2021 0More Documents from "Agung" 3r2q5z
Iconies 2018 Uin Maliki Malang 2tm50
March 2021 0
Soal Kelas 3 Sd Bab Anggota Keluarga 142y1v
November 2019 115
Indentifikasi Masalah Baru 2l1t3e
February 2021 0
Bs 499 2t4fp
October 2019 147
Chord Rama Bertahan 5m5k6i
November 2019 125