Bpp Spreadsheet Solver s Manual 29365c

UNIVERSITY OF BATH

’s Manual for BPP Spreadsheet Solver Dr Güneş Erdoğan School of Management, University of Bath. URL: http://verolog.deis.unibo.it/bpp-spreadsheet-solver Video tutorial: https://www.youtube.com/watch?v=HWD207zxm8Q

Bismillahirrahmanirrahim Developed by Dr. Güneş Erdoğan, 2015. School of Management, University of Bath. DISCLAIMER: THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE ORIGINAL DEVELOPER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

i

TABLE OF CONTENTS 1.

INTRODUCTION ......................................................................................................... 2

2.

HOW TO SOLVE A BIN PACKING PROBLEM ................................................................. 2

3.

SCOPE AND LIMITATIONS .......................................................................................... 3

4.

STRUCTURE OF THE WORKSHEETS ............................................................................. 3

4.1

BPP Solver Console .............................................................................................................................. 4

4.2

1.Items ................................................................................................................................................ 5

4.3

2.Bins .................................................................................................................................................. 6

4.4

3.Solution ............................................................................................................................................ 6

4.5

4.Visualization ..................................................................................................................................... 7

5.

FUNCTIONS ............................................................................................................... 7

5.1

Optional – Reset the workbook ........................................................................................................... 7

5.2

Setup Items Worksheet ....................................................................................................................... 7

5.3

Optional - Sort items alphabetically .................................................................................................... 7

5.4

Optional – Setup item-item compatibility worksheet .......................................................................... 7

5.5

Setup Bins Worksheet ......................................................................................................................... 7

5.6

Optional - Sort bins alphabetically ...................................................................................................... 7

5.7

Optional – Setup item-item compatibility worksheet .......................................................................... 8

5.8

Setup Solution Worksheet................................................................................................................... 8

5.9

Optional - Setup Visualization Worksheet ........................................................................................... 8

5.10

Engage BPP Spreadsheet Solver .......................................................................................................... 8

5.11

Optional – Feasibility Check ................................................................................................................ 8

6.

SOLUTION ALGORITHM.............................................................................................. 8

7.

CONCLUSION ............................................................................................................. 9

ii

1.

INTRODUCTION

In the past two years I have developed two open-source spreadsheet solvers using Excel and VBA: VRP Spreadsheet Solver (for vehicle routing problems) and FLP Spreadsheet Solver (for facility location problems). Both solvers are available for at no cost on the VeRoLog website. As of the time of this writing, my video tutorial channel for these solvers on YouTube attracts 50 viewers per day on the average. I am receiving about one e-mail per week with a question or a bug report. The total number of s per month is more than 100. A number of colleagues in Austria, Canada, Netherlands, and Spain are using the solvers in their lectures. I must it that this is more than what I have expected. In the introduction of the ’s manual of the FLP Spreadsheet Solver, I have stated that I would be looking into developing a spreadsheet solver for Bin Packing Problems (BPPs). I have realized that there is a need for such a solver, and I have found this solver to be much easier to design with respect to the previous ones, since there was no connection with an external data source. In addition, this solver works both on Windows and Macs, increasing its accessibility. It is capable of solving two-dimensional (and by reduction, one-dimensional) BPPs up to 50 bins and 200 items. For larger sizes, the solution algorithm still performs reasonably, setting up the worksheets takes more time than the solution algorithm itself. At this point, I do not have a clear idea about the next spreadsheet solver, or if there is a need for any other spreadsheet solver. Please send your bug reports, comments, and suggestions to [email protected].

2.

HOW TO SOLVE A BIN PACKING PROBLEM

BPP Spreadsheet Solver has been designed for simplicity above all. Using the menu item “FLP Spreadsheet Solver” in the tab “Add-ins” (in Macs, the commands are displayed in the “Tools” menu), you may issue the commands in their increasing numerical index, filling in data to each worksheet as it is generated. This menu is automatically generated when the file is opened, and deleted when it is closed. If the menu is not available for some reason, you can run the macro SetupMenuItems to refresh it. A step by step guide is given below. -

-

Enter all relevant data in the “BPP Solver Console” worksheet. Execute “1.1 Setup Items Worksheet” and enter the names and dimensions of each item type, as well as the number of items of each type. Do not forget to state if the item type can be rotated, must be packed, may be packed, or cannot be a packed (this last option is for what-if analysis). If an item type “may be packed”, do not forget to give it a positive profit, else it will not be packed. Optionally, you may execute “1.2 Optional – Sort items alphabetically” for easier access through the solution worksheet (to be setup later). Optionally, you may execute “1.3 Optional – Setup item-item compatibility worksheet”. This worksheet, if setup, contains information about which item types can be packed together into a bin. 2

-

-

-

-

3.

Execute “2.1 Setup Bins Worksheet”, and enter the names, dimensions, and costs of each bin type, as well as the number of bins available for each item type. Do not forget to state if a bin type may be used or should not be used (this second option is for what-if analysis). Optionally, you may execute “2.2 Optional – Sort bins alphabetically” for easier access through the solution worksheet (to be setup later). Optionally, you may execute “2.3 Optional – Setup bin-item compatibility worksheet”. This worksheet, if setup, contains information about which item types can be packed into the bin types. Execute “3. Setup Solution Worksheet”. This may take some time, based on the size of the problem. Optionally (and I think you will), you may execute “4. Optional – Setup Visualization Worksheet”. “5.1 Engage the BPP Spreadsheet Solver” and wait for the run to end. For best results, allow the solver the time to perform a few thousand iterations at least. As a fair warning, l must state that I have found that the Mac version of Excel is orders of magnitude solver than the Windows version. Check the solution and modify it to suit your objectives. Optionally, you can execute “5.2 Optional – Feasibility Check” function to see if the modified solution is still feasible. The “About” command will display the current version of the workbook as well as my information. Please cite the software and this manual in all projects they have been used.

SCOPE AND LIMITATIONS

Among many others, BPP Spreadsheet Solver operates on the following assumptions: -

4.

No safety distance is required between items in a bin. All items and bins are assumed to be rectangles. No items can be prepositioned in a bin. There are no constraints other than the no-overlap constraint and the (optional) compatibility constraints.

STRUCTURE OF THE WORKSHEETS

BPP Spreadsheet Solver adopts an incremental flow of information, with subsets of data being kept in separate worksheets, as depicted in Figure 1. Initially, the workbook only contains the worksheet named FLP Solver Console. The remaining worksheets should be generated in the sequence denoted by their indices. The names of the worksheets are hardcoded within the code, so you are advised against renaming them. All cell references are absolute, so you are advised against inserting or deleting cells (or columns or rows) in the worksheets. If a worksheet is modified then the worksheets with a larger index will need to be generated again, and the previous information will be permanently overwritten. If you would like to do a what-if analysis on the parameters, you are strongly advised to make copies of the worksheets before doing so.

3

Figure 1: The flow of information between the worksheets. The optional worksheets are denoted with a lighter color.

The cells containing the data in the worksheets are colour-coded with the following scheme: The cells with a black background are used by the worksheets and should not be modified. The cells with a green background are parameters to be set by the . The cells with a yellow background are to be computed by the worksheets. The cells with an orange background signal a warning. The cells with a red background signal an error. Note that some of the colour-coding features are not available for Excel 2007.

4.1 BPP Solver Console This worksheet is central to the workbook, and it should not be deleted. If it is deleted, please run the macro SetupConsoleWorksheet, or close and reopen the workbook to generate it again. The parameters defined within the worksheet are described below. Sequence: Instead of having a wizard interface, which is very easy to use but also very restrictive, the workbook numbers the worksheets in the order of progress. The parameters related to each worksheet are presented along with their sequence number. Please stick to the sequence unless you know what you are doing. Number of item types: Each item type has a width, length, associated profit, and the number of items available. The option of rotating the item, and if the item must be, may be, or cannot be packed may be input later. Number of types of bins: Each bin type has a width, length, associated cost, and the number of bins available. If the bin type may be used or cannot be used will be required.

4

Hide top right corner coordinates?: The solutions worksheet takes the bottom left corner of each item in a bin, and computes the top right corner coordinates. This option can hide the columns associated with the top right coordinates of items. Item labels: If set to “Yes”, writes the type of the item into the rectangle representing it in the visualization worksheet. First Fit Decreasing based on: An algorithmic parameter defining the order of items being packed within the constructive heuristic. Different settings may result in alternative solutions. The default setting is Area, which works well on the instances where most of the items can be rotated. For instances where most of the items cannot be rotated, Circumference, Width or Height may result in a better solution. Also minimize distance between identical items?: If set to “Yes”, attempts to minimize the number of identical items being placed in separate bins, and the distance between identical items within each bin. This option may slightly slow down the algorithm due to the distance computation step. The main algorithm is not built for this purpose, and the s are warned not to rely on this option. For effective result with this option, allow more time to the algorithm. U time limit (seconds): The amount of time after which the algorithm will end. As a general rule: the longer time you allow, the better the results will be. I recommend at least 0.5 seconds per item and bin, e.g. for a problem with 20 items and 2 bins, 11 seconds. I recommend a much longer time for Mac Excel, due to the mismatch between Microsoft and Apple products. Random number seed: This option is provided to give the control over the random component. However, Excel generates substreams of random variables for the same seed, so the same seed may return different results. 4.2 1.Items The columns in this worksheet are explained below. Item Type ID: This column is automatically generated, and must not be deleted or altered. Name: The entries in this column must be unique. Being specific at this stage will help you later. Width (x): How wide the item is. Length (y): How tall the item is. Area: This field is automatically calculated based on the width and the length. Can be rotated? : If set to “Yes”, the solver will look into possibilities of rotating the item. It is recommended to set it to “No” whenever applicable to speed up the algorithm. Must be packed? : The item types that “must be packed” will have absolute priority over the items that “may be packed”. If an item type “may be packed”, make sure that it has a positive profit, otherwise the solver will not attempt to pack it.

5

Profit: The benefit of packing one item of this type. The objective function is computed as the sum of the profits of the items packed minus the sum of the costs of the bins used. Number of items: How many items of this type must or may be packed. If you have a type of item for which you have to pack a minimum amount and the rest is optional, I recommend that you split it into two types: the first “must be packed”, the other “may be packed”.

4.3 2.Bins The columns in this worksheet are explained below. Bin Type ID: This column is automatically generated, and must not be deleted or altered. Name: The entries in this column must be unique. Being specific at this stage will help you later. Width (x): How wide the bin type is. Length (y): How tall the bin type is. Area: This field is automatically calculated based on the width and the length. May be used? : The option of “Do not use” is provided for the possibility of what-if analysis. Cost: The cost of using one bin of this type. The objective function is computed as the sum of the profits of the items packed minus the sum of the costs of the bins used. Number of bins: How many bins of this type are available.

4.4 3.Solution For each bin a set of columns detailing the items packed into it will be generated. You may scroll right to see the items in the other bins. Column A also contains the List of detected infeasibilities, below the items in the first bin. The columns in this worksheet are explained below. Item type name: The name of type of the item. Can be chosen from the drop down menu populated with the names of the types of items. x coordinate: The x coordinate of the bottom left corner for the item. y coordinate: The x coordinate of the bottom left corner for the item. Rotated: If the item is rotated or not. The following values are computed based on the columns above. Total area: The sum of the column Area. In a feasible solution, Total Area should be less than or equal to the area of the bin.

6

Net profit: The sum of the profits of the items in the bin minus the cost of the bin (if there is at least one item in it).

4.5 4.Visualization This worksheet is optional, and if generated, it contains rectangle shapes showing the bins and the items in the bins. You can move the shapes around to see if you can arrive at a better or better looking solution, but unfortunately the current design will not automatically write your solution into the solution worksheet.

5.

FUNCTIONS

5.1 Optional – Reset the workbook This is a quick way of deleting the data worksheets and resetting the console worksheet. Be careful, it is irreversible. Corresponds to the macro ResetWorkbook. 5.2 Setup Items Worksheet Corresponds to the macro SetupItemsWorksheet. 5.3 Optional - Sort items alphabetically The drop down menus of the solution worksheet are populated by the list of item types. To have alphabetically ordered drop down menus, you need to sort the item types. Corresponds to the macro SortItemTypes. 5.4 Optional – Setup item-item compatibility worksheet Two item types are compatible if they can be packed into the same bin. If you do not generate this worksheet, the solver will assume that all item types are compatible with each other. If you generate it, you may choose which item types are incompatible. Corresponds to the macro SetupItemItemCompatibilityWorksheet. 5.5 Setup Bins Worksheet Corresponds to the macro SetupBinsWorksheet. 5.6 Optional - Sort bins alphabetically The bins in the solution and the visualization worksheets will follow the order of the bin types in the bins worksheet. In general, it is a good idea to keep them in an alphabetical order. If you have a certain order of bins in your mind, do not use this option. Corresponds to the macro SortBinTypes.

7

5.7 Optional – Setup item-item compatibility worksheet A bin type is compatible with an item type if the item type can be packed into the bin type (e.g. frozen foods and refrigerated / non-refrigerated trucks). If you do not generate this worksheet, the solver will assume that all item types are compatible with all bin types. If you generate it, you may choose which item types and bin types are incompatible. Corresponds to the macro SetupBinItemCompatibilityWorksheet. 5.8 Setup Solution Worksheet Corresponds to the macro SetupSolutionWorksheet. 5.9 Optional - Setup Visualization Worksheet Corresponds to the macro SetupVisualizationWorksheet. 5.10 Engage BPP Spreadsheet Solver Corresponds to the macro BPP_Solver. 5.11 Optional – Feasibility Check This function is supplied for checking the feasibility of the data and the solution after manual alterations. Corresponds to the macro FeasibilityCheckDataAndSolution.

6.

SOLUTION ALGORITHM

The field of BPP research mostly focuses on heuristic algorithms. The details of the literature would be beyond the scope of this document, and we do not claim that a single algorithm can successfully solve all variants of the BPP. Let it suffice to state that a variant of the Large Neighbourhood Search is implemented within the BPP Spreadsheet Solver. An outline of the algorithm is given below. Step 1 (Initialization): Sort the items with respect to their priority, size, and profit. Sort bins with respect to their size and cost. Step 2 (Constructive step): Use the First-Fit-Decreasing heuristic to pack the items into the bins. Step 3 (Perturbation): Randomly remove items from bins, and randomly empty a number of bins. Sort the bins with respect to the area packed into them and their cost per unit area. Step 4 (Reoptimization): Use the First-Fit-Decreasing heuristic to repack the removed items. Step 5 (Solution update): If the new solution is better than the best known solution, update the best known solution. Otherwise, revert back to the best known solution. If the time limit is not exceeded, go to Step 3.

8

7.

Conclusion

Despite its shortcomings, I hope that the BPP Spreadsheet Solver will be used as a minor decision system for small and medium enterprises as well as for teaching and undergraduate and postgraduate levels. I am almost sure that academics will disagree with some design choices, but they can be corrected. I am also quite certain that practitioners will find features that do not completely fit their needs, but it can provide you starting points that lead to an actual solution. Please send bug reports, comments, and suggestions to [email protected].

9