30u04-substitute Hfa30pa60c 81c1g
This document was ed by and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this report form. Report 3l3c15
Overview 3z723u
& View 30u04-substitute Hfa30pa60c as PDF for free.
More details 2i4a6q
- Words: 1,324
- Pages: 7
Bulletin PD-20750 rev. B 11/01
30U04 Ultrafast Rectifier Features • • • •
trr = 60ns IF(AV) = 30Amp VR = 400V
Ultrafast Recovery Time Low Forward Voltage Drop Low Leakage Current 175°C Operating Junction Temperature
Description/ Applications International Rectifier's FRED.. series are the state of the art Ultra fast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultra fast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as free-wheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers.
Absolute Maximum Ratings Parameters
Max
Units
VRRM
Peak Repetitive Peak Reverse Voltage
400
V
IF(AV)
Average Rectified Forward Current
Per Leg
15
A
Total Device (Rated VR ), TC = 149°C
Total Device
30
IFSM
Non Repetitive Peak Surge Current, @ 25°C
Per Leg
200
IFRM
Peak Repetitive Forward Current
Per Leg
30
(Rated VR , Square wave, 20 KHz), TC = 149°C TJ, TSTG
Operating Junction and Storage Temperatures
- 65 to 175
°C
Case Styles
30U04 Base Common Cathode 2
1
Anode 1
TO247AC www.irf.com
3 2
Anode 2
Common Cathode
1
30U04 Bulletin PD-20750 rev. B 11/01
Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr
Breakdown Voltage, Blocking Voltage
VF
Forward Voltage
IR
Min Typ Max Units Test Conditions 400
Reverse Leakage Current
-
-
V
IR = 100µA
-
1.17 1.25
V
IF = 15A
-
0.93 1.12
V
IF = 15A, TJ = 150°C
-
0.3
10
µA
VR = VR Rated
-
30
500
µA
TJ = 150°C, VR = VR Rated
CT
Junction Capacitance
-
28
-
pF
VR = 400V
LS
Series Inductance
-
12
-
nH
Measured lead to lead 5mm from package body
Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameters trr
Min Typ Max Units Test Conditions
Reverse Recovery Time
-
36
60
-
46
-
ns
TJ = 25°C
80 IRRM
Peak Recovery Current
Reverse Recovery Charge
Qrr
-
3.6
-
-
8.7
-
-
84
-
-
345
-
IF = 1.0A, diF/dt = 50A/µs, VR = 30V
A
TJ = 125°C
IF = 15A
TJ = 25°C
VR = 200V diF /dt = 200A/µs
TJ = 125°C nC
TJ = 25°C TJ = 125°C
Thermal - Mechanical Characteristics Min
Typ
Max
Units
TJ
Parameters Max. Junction Temperature Range
-
-
175
°C
TStg
Max. Storage Temperature Range
- 65
-
175
RthJC
Thermal Resistance, Junction to Case
Per Leg
-
0.8
1.5
Thermal Resistance, Junction to Ambient
Per Leg
-
-
40
Thermal Resistance, Case to Heatsink
-
0.4
-
Weight
-
6.0
-
g
-
0.21
-
(oz)
6.0
-
12
Kg-cm
5.0
-
10
lbf.in
RthJA ! RthCS Wt
"
Mounting Torque
°C/W
! Typical Socket Mount "#Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
30U04 Bulletin PD-20750 rev. B 11/01
100
1000 Tj = 175˚C
Reverse Current - I R (µA)
10
Tj = 150˚C
10
Tj = 125˚C
1 Tj = 100˚C
0.1 0.01 Tj = 25˚C
0.001 .0001 0
T J = 175˚C
100
200
300
400
Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage
T = 150˚C J
T = 25˚C J
1000 Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
100
1
0.1 0.2 0.4 0.6 0.8
1
1.2 1.4 1.6 1.8
T = 25˚C J
100
10
2
0
100
200
300
400
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics
Thermal Impedance Z
thJC
(°C/W)
10
1
0.1
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01
PDM
t1 t2
Single Pulse (Thermal Resistance)
Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC+ Tc
0.01 0.00001
0.0001
0.001 0.01 0.1 1 t1, Rectangular Pulse Duration (Seconds)
10
100
Fig. 4 - Max. Thermal Impedance Z thJC Characteristics
www.irf.com
3
30U04 Bulletin PD-20750 rev. B 11/01
25 Average Power Loss ( Watts )
Allowable Case Temperature (°C)
180 170 DC
160 150 Square wave (D = 0.50) Rated Vr applied
140
RMS Limit
20 15 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC
10 5
see note (3)
0
130 0
5
10
15
20
0
25
Average Forward Current - IF(AV) (A)
5
10
15
20
25
Average Forward Current - IF(AV) (A)
Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
1000
100 If = 30A If = 16A If = 8A
90 80
Qrr ( nC )
trr ( ns )
70 60 50
100 If = 30A If = 16A If = 8A
40 30 20
Vr = 200V Tj = 125˚C Tj = 25˚C
Vr = 200V Tj = 125˚C Tj = 25˚C
10 100
1000 di F /dt (A/µs )
Fig. 7 - Typical Reverse Recovery vs. di F /dt
10 100
1000 di F /dt (A/µs )
Fig. 8 - Typical Stored Charge vs. di F /dt
(3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR
4
www.irf.com
30U04 Bulletin PD-20750 rev. B 11/01
Reverse Recovery Circuit
VR = 200V
0.01 Ω L = 70µH D.U.T. di F /dt dif/dt ADJUST
D IRFP250
G
S
Fig. 9- Reverse Recovery Parameter Test Circuit
3
t rr
IF
tb
ta
0
2
Q rr I RRM
4
0.5 I RRM di(rec)M/dt
5
0.75 I RRM 1
di fF/dt /dt
1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line ing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr
Fig. 10 - Reverse Recovery Waveform and Definitions
www.irf.com
5
30U04 Bulletin PD-20750 rev. B 11/01
Outline Table 3.65 (0.144)
15.90 (0.626)
3.55 (0.139)
DIA.
5.30 (0.209) 4.70 (0.185)
15.30 (0.602)
2.5 (0.098) Base Common Cathode
1.5 (0.059) 5.70 (0.225) 5.30 (0.208) 20.30 (0.800) 19.70 (0.775)
1
2
2
5.50 (0.217) 4.50 (0.177) (2 PLCS.)
3
1
Anode
14.80 (0.583) 14.20 (0.559)
1
4.30 (0.170)
1.00 (0.039) 5.47 (0.216) 5.43 (0.213)
Anode 2
Common Cathode
3.70 (0.145) 2.20 (0.087) MAX.
1.40 (0.056)
3 2
2.40 (0.095) MAX. 0.80 (0.032)
3.20 (0.126) MAX.
0.40 (0.213)
Conforms to JEDEC Outline TO-247AC Dimensions in millimeters and (inches)
Ordering Information Table Device Code
6
30
C
P
U
04
1
2
3
4
5
1
-
Current Rating
2
-
Common Cathode
3
-
TO-247AC
4
-
Ultrafast Recovery
5
-
Voltage Rating
(30 = 30A)
(04 = 400V)
www.irf.com
30U04 Bulletin PD-20750 rev. B 11/01
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales information. 11/01
www.irf.com
7
30U04 Ultrafast Rectifier Features • • • •
trr = 60ns IF(AV) = 30Amp VR = 400V
Ultrafast Recovery Time Low Forward Voltage Drop Low Leakage Current 175°C Operating Junction Temperature
Description/ Applications International Rectifier's FRED.. series are the state of the art Ultra fast recovery rectifiers specifically designed with optimized performance of forward voltage drop and ultra fast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as free-wheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers.
Absolute Maximum Ratings Parameters
Max
Units
VRRM
Peak Repetitive Peak Reverse Voltage
400
V
IF(AV)
Average Rectified Forward Current
Per Leg
15
A
Total Device (Rated VR ), TC = 149°C
Total Device
30
IFSM
Non Repetitive Peak Surge Current, @ 25°C
Per Leg
200
IFRM
Peak Repetitive Forward Current
Per Leg
30
(Rated VR , Square wave, 20 KHz), TC = 149°C TJ, TSTG
Operating Junction and Storage Temperatures
- 65 to 175
°C
Case Styles
30U04 Base Common Cathode 2
1
Anode 1
TO247AC www.irf.com
3 2
Anode 2
Common Cathode
1
30U04 Bulletin PD-20750 rev. B 11/01
Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr
Breakdown Voltage, Blocking Voltage
VF
Forward Voltage
IR
Min Typ Max Units Test Conditions 400
Reverse Leakage Current
-
-
V
IR = 100µA
-
1.17 1.25
V
IF = 15A
-
0.93 1.12
V
IF = 15A, TJ = 150°C
-
0.3
10
µA
VR = VR Rated
-
30
500
µA
TJ = 150°C, VR = VR Rated
CT
Junction Capacitance
-
28
-
pF
VR = 400V
LS
Series Inductance
-
12
-
nH
Measured lead to lead 5mm from package body
Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameters trr
Min Typ Max Units Test Conditions
Reverse Recovery Time
-
36
60
-
46
-
ns
TJ = 25°C
80 IRRM
Peak Recovery Current
Reverse Recovery Charge
Qrr
-
3.6
-
-
8.7
-
-
84
-
-
345
-
IF = 1.0A, diF/dt = 50A/µs, VR = 30V
A
TJ = 125°C
IF = 15A
TJ = 25°C
VR = 200V diF /dt = 200A/µs
TJ = 125°C nC
TJ = 25°C TJ = 125°C
Thermal - Mechanical Characteristics Min
Typ
Max
Units
TJ
Parameters Max. Junction Temperature Range
-
-
175
°C
TStg
Max. Storage Temperature Range
- 65
-
175
RthJC
Thermal Resistance, Junction to Case
Per Leg
-
0.8
1.5
Thermal Resistance, Junction to Ambient
Per Leg
-
-
40
Thermal Resistance, Case to Heatsink
-
0.4
-
Weight
-
6.0
-
g
-
0.21
-
(oz)
6.0
-
12
Kg-cm
5.0
-
10
lbf.in
RthJA ! RthCS Wt
"
Mounting Torque
°C/W
! Typical Socket Mount "#Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
30U04 Bulletin PD-20750 rev. B 11/01
100
1000 Tj = 175˚C
Reverse Current - I R (µA)
10
Tj = 150˚C
10
Tj = 125˚C
1 Tj = 100˚C
0.1 0.01 Tj = 25˚C
0.001 .0001 0
T J = 175˚C
100
200
300
400
Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage
T = 150˚C J
T = 25˚C J
1000 Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
100
1
0.1 0.2 0.4 0.6 0.8
1
1.2 1.4 1.6 1.8
T = 25˚C J
100
10
2
0
100
200
300
400
Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage
Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics
Thermal Impedance Z
thJC
(°C/W)
10
1
0.1
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01
PDM
t1 t2
Single Pulse (Thermal Resistance)
Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC+ Tc
0.01 0.00001
0.0001
0.001 0.01 0.1 1 t1, Rectangular Pulse Duration (Seconds)
10
100
Fig. 4 - Max. Thermal Impedance Z thJC Characteristics
www.irf.com
3
30U04 Bulletin PD-20750 rev. B 11/01
25 Average Power Loss ( Watts )
Allowable Case Temperature (°C)
180 170 DC
160 150 Square wave (D = 0.50) Rated Vr applied
140
RMS Limit
20 15 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC
10 5
see note (3)
0
130 0
5
10
15
20
0
25
Average Forward Current - IF(AV) (A)
5
10
15
20
25
Average Forward Current - IF(AV) (A)
Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
1000
100 If = 30A If = 16A If = 8A
90 80
Qrr ( nC )
trr ( ns )
70 60 50
100 If = 30A If = 16A If = 8A
40 30 20
Vr = 200V Tj = 125˚C Tj = 25˚C
Vr = 200V Tj = 125˚C Tj = 25˚C
10 100
1000 di F /dt (A/µs )
Fig. 7 - Typical Reverse Recovery vs. di F /dt
10 100
1000 di F /dt (A/µs )
Fig. 8 - Typical Stored Charge vs. di F /dt
(3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR
4
www.irf.com
30U04 Bulletin PD-20750 rev. B 11/01
Reverse Recovery Circuit
VR = 200V
0.01 Ω L = 70µH D.U.T. di F /dt dif/dt ADJUST
D IRFP250
G
S
Fig. 9- Reverse Recovery Parameter Test Circuit
3
t rr
IF
tb
ta
0
2
Q rr I RRM
4
0.5 I RRM di(rec)M/dt
5
0.75 I RRM 1
di fF/dt /dt
1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line ing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr
Fig. 10 - Reverse Recovery Waveform and Definitions
www.irf.com
5
30U04 Bulletin PD-20750 rev. B 11/01
Outline Table 3.65 (0.144)
15.90 (0.626)
3.55 (0.139)
DIA.
5.30 (0.209) 4.70 (0.185)
15.30 (0.602)
2.5 (0.098) Base Common Cathode
1.5 (0.059) 5.70 (0.225) 5.30 (0.208) 20.30 (0.800) 19.70 (0.775)
1
2
2
5.50 (0.217) 4.50 (0.177) (2 PLCS.)
3
1
Anode
14.80 (0.583) 14.20 (0.559)
1
4.30 (0.170)
1.00 (0.039) 5.47 (0.216) 5.43 (0.213)
Anode 2
Common Cathode
3.70 (0.145) 2.20 (0.087) MAX.
1.40 (0.056)
3 2
2.40 (0.095) MAX. 0.80 (0.032)
3.20 (0.126) MAX.
0.40 (0.213)
Conforms to JEDEC Outline TO-247AC Dimensions in millimeters and (inches)
Ordering Information Table Device Code
6
30
C
P
U
04
1
2
3
4
5
1
-
Current Rating
2
-
Common Cathode
3
-
TO-247AC
4
-
Ultrafast Recovery
5
-
Voltage Rating
(30 = 30A)
(04 = 400V)
www.irf.com
30U04 Bulletin PD-20750 rev. B 11/01
Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales information. 11/01
www.irf.com
7
Related Documents g842
30u04-substitute Hfa30pa60c 81c1g
May 2022 0More Documents from "Rodelo Dormido" 724735
30u04-substitute Hfa30pa60c 81c1g
May 2022 0
Parcial Vectores z83q
February 2023 0
Informacion General De Totto 4j4o1v
February 2023 0
929
November 2019 42
Reglamento Operativo 2016 Convocatoria 757 d6h54
December 2019 45